diff options
| author | jk.kernel@gmail.com <jk.kernel@gmail.com> | 2016-07-26 18:28:23 +0800 |
|---|---|---|
| committer | Simon Glass <sjg@chromium.org> | 2016-07-31 07:24:20 -0600 |
| commit | 5051a77b2dc2c8dc1f7454ed900b94d228ad4bd5 (patch) | |
| tree | 874e4fb9bde6871711b38e12d7b78d3b7aacf027 /arch/arm/mach-rockchip/rk3288-board-spl.c | |
| parent | 194a241a6ed873ec8de6848e850ff29b4b789e74 (diff) | |
Revert "rockchip: Move the MMC setup check earlier"
Boot Rom wouldn't initialize sdmmc while booting from eMMC. We need to
setup sdmmc gpio, otherwise we will hit an error below:
=>mmc info
blk_get_device: if_type=6, devnum=0: dwmmc@ff0c0000.blk, 6, 0
uclass_find_device_by_seq: 0 -1
uclass_find_device_by_seq: 0 0
- -1 -1
- -1 0
- found
uclass_find_device_by_seq: 0 1
- -1 -1
- -1 0
- not found
fdtdec_get_int_array: interrupts
get_prop_check_min_len: interrupts
Buswidth = 1, clock: 0
Buswidth = 1, clock: 400000
Sending CMD0
dwmci_send_cmd: Timeout on data busy
dwmci_send_cmd: Timeout on data busy
dwmci_send_cmd: Timeout on data busy
dwmci_send_cmd: Timeout on data busy
This reverts commit 6efeeea79c880d3dd262e0dca9da2687f0ab68c9.
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch/arm/mach-rockchip/rk3288-board-spl.c')
| -rw-r--r-- | arch/arm/mach-rockchip/rk3288-board-spl.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index ed14023021..1b74173430 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -116,6 +116,9 @@ static void configure_l2ctlr(void) #ifdef CONFIG_SPL_MMC_SUPPORT static int configure_emmc(struct udevice *pinctrl) { +#if !defined(CONFIG_TARGET_ROCK2) && !defined(CONFIG_TARGET_FIREFLY_RK3288) && \ + !defined(CONFIG_TARGET_EVB_RK3288) + struct gpio_desc desc; int ret; @@ -145,7 +148,7 @@ static int configure_emmc(struct udevice *pinctrl) debug("gpio value ret=%d\n", ret); return ret; } - +#endif return 0; } #endif @@ -249,20 +252,17 @@ void spl_board_init(void) debug("%s: Cannot find pinctrl device\n", __func__); goto err; } + #ifdef CONFIG_SPL_MMC_SUPPORT - if (!IS_ENABLED(CONFIG_TARGET_ROCK2) && - !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288) && - !IS_ENABLED(CONFIG_TARGET_EVB_RK3288)) { - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - ret = configure_emmc(pinctrl); - if (ret) { - debug("%s: Failed to set up eMMC\n", __func__); - goto err; - } + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); + if (ret) { + debug("%s: Failed to set up SD card\n", __func__); + goto err; + } + ret = configure_emmc(pinctrl); + if (ret) { + debug("%s: Failed to set up eMMC\n", __func__); + goto err; } #endif |