diff options
author | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-04-01 12:59:25 +0200 |
---|---|---|
committer | Simon Glass <sjg@chromium.org> | 2017-04-15 10:18:29 -0600 |
commit | 7ee16de58bddaa9619c264313008d7e19300b42a (patch) | |
tree | 7086a52d95469c517833173a11ed06529b6e29b4 /arch/arm/mach-rockchip/rk3399-board-spl.c | |
parent | d3cf9eb2d87c8961408ec5aa6ebe0c54f2c13724 (diff) |
rockchip: rk3399: spl: add UART0 support for SPL
The RK3399-Q7 ("Puma") SoM exposes UART0 as the Qseven UART (i.e. the
serial line available via standardised pins on the edge connector and
available on a RS232 connector).
To support boards (such as the RK3399-Q7) that require UART0 as a
debug console, we match CONFIG_DEBUG_UART_BASE and add the appropriate
iomux setup to the rk3399 SPL code.
As we are already touching this code, we also move the board-specific
UART setup (i.e. iomux setup) into board_debug_uart_init(). This will
be called from the debug UART init when CONFIG_DEBUG_UART_BOARD_INIT
is set.
As the RK3399 needs to use its board_debug_uart_init() function, we
have Kconfig enable it by default for RK3399 builds.
With everything set up to define CONFIG_BAUDRATE via defconfig and
with to have the SPL debug UART either on UART0 or UART2, the configs
for the RK3399 EVB are then update (the change for the RK3399-Q7 is
left for later to not cause issues on applying the change).
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'arch/arm/mach-rockchip/rk3399-board-spl.c')
-rw-r--r-- | arch/arm/mach-rockchip/rk3399-board-spl.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index f5465294c4..050f5e167e 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -156,20 +156,24 @@ void secure_timer_init(void) writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG); } -#define GRF_EMMCCORE_CON11 0xff77f02c #define SGRF_DDR_RGN_CON16 0xff330040 -void board_init_f(ulong dummy) -{ - struct udevice *pinctrl; - struct udevice *dev; - int ret; - /* Example code showing how to enable the debug UART on RK3288 */ +void board_debug_uart_init(void) +{ #include <asm/arch/grf_rk3399.h> - /* Enable early UART2 channel C on the RK3399 */ #define GRF_BASE 0xff770000 struct rk3399_grf_regs * const grf = (void *)GRF_BASE; +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) + /* Enable early UART0 on the RK3399 */ + rk_clrsetreg(&grf->gpio2c_iomux, + GRF_GPIO2C0_SEL_MASK, + GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT); + rk_clrsetreg(&grf->gpio2c_iomux, + GRF_GPIO2C1_SEL_MASK, + GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT); +#else + /* Enable early UART2 channel C on the RK3399 */ rk_clrsetreg(&grf->gpio4c_iomux, GRF_GPIO4C3_SEL_MASK, GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT); @@ -180,6 +184,16 @@ void board_init_f(ulong dummy) rk_clrsetreg(&grf->soc_con7, GRF_UART_DBG_SEL_MASK, GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT); +#endif +} + +#define GRF_EMMCCORE_CON11 0xff77f02c +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + #define EARLY_UART #ifdef EARLY_UART /* |