ARM: dts: rmobile: Zap redundant USB/SDHI nodes on M3N

v2019.01 commit cbff9f80cedd ("ARM: dts: rmobile: Sync Gen3 DTs with
Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is
equivalent to partially reverting below v2019.01 commits:
 - f529bc551b6d ("ARM: dts: rmobile: Extract USB nodes on M3N")
 - 830b94f76867 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously:
 - not needed if no U-boot-specific changes are needed in those nodes.
 - potentially dangerous/error-prone, since the duplicated properties
   override the properties originally defined in <soc>.dtsi. One
   possible consequence is that <soc>.dtsi is getting an update from
   Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation,
   the obsolete property values from <soc>-u-boot.dtsi will take
   precedence masking some of the <soc>.dtsi updates, potentially
   leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user"
of r8a77965-u-boot.dtsi) before and after the patch (slightly
reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of
SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no
U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in
r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \
           after-r8a77965-salvator-x-u-boot.dtb
 --- /dev/fd/63  2019-03-09 12:57:40.877963983 +0100
 +++ /dev/fd/62  2019-03-09 12:57:40.877963983 +0100
 @@ -1471,7 +1471,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x51 0xc 0x1>;
        clocks = <0x6 0x1 0x13a>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa5 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x4d>;
 @@ -1492,7 +1492,7 @@

      sd@ee120000 {
        clocks = <0x6 0x1 0x139>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa6 0x4>;
        max-frequency = <0xbebc200>;
        power-domains = <0x1 0x20>;
 @@ -1504,7 +1504,7 @@
      sd@ee140000 {
        bus-width = <0x8>;
        clocks = <0x6 0x1 0x138>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        fixed-emmc-driver-type = <0x1>;
        interrupts = <0x0 0xa7 0x4>;
        max-frequency = <0xbebc200>;
 @@ -1526,7 +1526,7 @@
        bus-width = <0x4>;
        cd-gpios = <0x5a 0xf 0x1>;
        clocks = <0x6 0x1 0x137>;
 -      compatible = "renesas,sdhi-r8a77965";
 +      compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi";
        interrupts = <0x0 0xa8 0x4>;
        max-frequency = <0xc65d400>;
        pinctrl-0 = <0x56>;
 @@ -1868,14 +1868,14 @@

      usb-phy@ee0a0200 {
        #phy-cells = <0x0>;
 -      clocks = <0x6 0x1 0x2be>;
 +      clocks = <0x6 0x1 0x2bf>;
        compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy";
        phandle = <0x47>;
        pinctrl-0 = <0x4c>;
        pinctrl-names = "default";
        power-domains = <0x1 0x20>;
        reg = <0x0 0xee0a0200 0x0 0x700>;
 -      resets = <0x6 0x2be>;
 +      resets = <0x6 0x2bf>;
        status = "okay";
      };

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>

0 files changed, 0 insertions, 0 deletions