sunxi: add LPDDR3 timing from stock boot0

As we added LPDDR3 support in the former patch, we need a set of timing
info to really enable it.

Add the timing info used by stock boot0.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 83 insertions, 0 deletions

diff --git a/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c b/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
new file mode 100644
index 0000000000..bd57e2f6aa
--- /dev/null
+++ b/arch/arm/mach-sunxi/dram_timings/lpddr3_stock.c
@@ -0,0 +1,83 @@
+#include <common.h>
+#include <asm/arch/dram.h>
+#include <asm/arch/cpu.h>
+
+void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
+{
+	struct sunxi_mctl_ctl_reg * const mctl_ctl =
+			(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
+
+	u8 tccd		= 2;
+	u8 tfaw		= max(ns_to_t(50), 4);
+	u8 trrd		= max(ns_to_t(10), 2);
+	u8 trcd		= max(ns_to_t(24), 2);
+	u8 trc		= ns_to_t(70);
+	u8 txp		= max(ns_to_t(8), 2);
+	u8 twtr		= max(ns_to_t(8), 2);
+	u8 trtp		= max(ns_to_t(8), 2);
+	u8 twr		= max(ns_to_t(15), 3);
+	u8 trp		= max(ns_to_t(27), 2);
+	u8 tras		= ns_to_t(42);
+	u16 trefi	= ns_to_t(3900) / 32;
+	u16 trfc	= ns_to_t(210);
+
+	u8 tmrw		= 5;
+	u8 tmrd		= 5;
+	u8 tmod		= 12;
+	u8 tcke		= 3;
+	u8 tcksrx	= 5;
+	u8 tcksre	= 5;
+	u8 tckesr	= 5;
+	u8 trasmax	= 24;
+
+	u8 tcl		= 6; /* CL 12 */
+	u8 tcwl		= 3; /* CWL 6 */
+	u8 t_rdata_en	= 5;
+	u8 wr_latency	= 2;
+
+	u32 tdinit0	= (200 * CONFIG_DRAM_CLK) + 1;		/* 200us */
+	u32 tdinit1	= (100 * CONFIG_DRAM_CLK) / 1000 + 1;	/* 100ns */
+	u32 tdinit2	= (11 * CONFIG_DRAM_CLK) + 1;		/* 11us */
+	u32 tdinit3	= (1 * CONFIG_DRAM_CLK) + 1;		/* 1us */
+
+	u8 twtp		= tcwl + 4 + twr + 1;
+	u8 twr2rd	= tcwl + 4 + 1 + twtr;
+	u8 trd2wr	= tcl + 4 + 5 - tcwl + 1;
+
+	/* set mode register */
+	writel(0xc3, &mctl_ctl->mr[1]);		/* nWR=8, BL8 */
+	writel(0xa, &mctl_ctl->mr[2]);		/* RL=12, WL=6 */
+	writel(0x2, &mctl_ctl->mr[3]);		/* 40 0hms PD/PU */
+
+	/* set DRAM timing */
+	writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
+	       DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
+	       &mctl_ctl->dramtmg[0]);
+	writel(DRAMTMG1_TXP(txp) | DRAMTMG1_TRTP(trtp) | DRAMTMG1_TRC(trc),
+	       &mctl_ctl->dramtmg[1]);
+	writel(DRAMTMG2_TCWL(tcwl) | DRAMTMG2_TCL(tcl) |
+	       DRAMTMG2_TRD2WR(trd2wr) | DRAMTMG2_TWR2RD(twr2rd),
+	       &mctl_ctl->dramtmg[2]);
+	writel(DRAMTMG3_TMRW(tmrw) | DRAMTMG3_TMRD(tmrd) | DRAMTMG3_TMOD(tmod),
+	       &mctl_ctl->dramtmg[3]);
+	writel(DRAMTMG4_TRCD(trcd) | DRAMTMG4_TCCD(tccd) | DRAMTMG4_TRRD(trrd) |
+	       DRAMTMG4_TRP(trp), &mctl_ctl->dramtmg[4]);
+	writel(DRAMTMG5_TCKSRX(tcksrx) | DRAMTMG5_TCKSRE(tcksre) |
+	       DRAMTMG5_TCKESR(tckesr) | DRAMTMG5_TCKE(tcke),
+	       &mctl_ctl->dramtmg[5]);
+
+	/* set two rank timing */
+	clrsetbits_le32(&mctl_ctl->dramtmg[8], (0xff << 8) | (0xff << 0),
+			(0x66 << 8) | (0x10 << 0));
+
+	/* set PHY interface timing, write latency and read latency configure */
+	writel((0x2 << 24) | (t_rdata_en << 16) | (0x1 << 8) |
+	       (wr_latency << 0), &mctl_ctl->pitmg[0]);
+
+	/* set PHY timing, PTR0-2 use default */
+	writel(PTR3_TDINIT0(tdinit0) | PTR3_TDINIT1(tdinit1), &mctl_ctl->ptr[3]);
+	writel(PTR4_TDINIT2(tdinit2) | PTR4_TDINIT3(tdinit3), &mctl_ctl->ptr[4]);
+
+	/* set refresh timing */
+	writel(RFSHTMG_TREFI(trefi) | RFSHTMG_TRFC(trfc), &mctl_ctl->rfshtmg);
+}