bus: uniphier-system-bus: move hardware init from board files

Move the bus initialization code to this driver from board files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

10 files changed, 45 insertions, 256 deletions

diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index 73b0f133ce..598101541b 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -13,6 +13,33 @@
 #include "micro-support-card.h"
 #include "soc-info.h"
 
+#define PC0CTRL				0x598000c0
+
+#if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_SLD8)
+static void uniphier_ld4_sbc_init(void)
+{
+	u32 tmp;
+
+	/* system bus output enable */
+	tmp = readl(PC0CTRL);
+	tmp &= 0xfffffcff;
+	writel(tmp, PC0CTRL);
+}
+#endif
+
+#if defined(CONFIG_ARCH_UNIPHIER_PXS2) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD6B) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD11) || \
+    defined(CONFIG_ARCH_UNIPHIER_LD20) || \
+    defined(CONFIG_ARCH_UNIPHIER_PXS3)
+static void uniphier_pxs2_sbc_init(void)
+{
+	/* necessary for ROM boot ?? */
+	/* system bus output enable */
+	writel(0x17, PC0CTRL);
+}
+#endif
+
 #ifdef CONFIG_ARCH_UNIPHIER_LD20
 static void uniphier_ld20_misc_init(void)
 {
@@ -45,7 +72,6 @@ static const struct uniphier_initdata uniphier_initdata[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_PRO4)
 	{
 		.soc_id = UNIPHIER_PRO4_ID,
-		.sbc_init = uniphier_sbc_init_savepin,
 		.pll_init = uniphier_pro4_pll_init,
 		.clk_init = uniphier_pro4_clk_init,
 	},
@@ -60,7 +86,6 @@ static const struct uniphier_initdata uniphier_initdata[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_PRO5)
 	{
 		.soc_id = UNIPHIER_PRO5_ID,
-		.sbc_init = uniphier_sbc_init_savepin,
 		.clk_init = uniphier_pro5_clk_init,
 	},
 #endif
@@ -81,7 +106,7 @@ static const struct uniphier_initdata uniphier_initdata[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 	{
 		.soc_id = UNIPHIER_LD11_ID,
-		.sbc_init = uniphier_ld11_sbc_init,
+		.sbc_init = uniphier_pxs2_sbc_init,
 		.pll_init = uniphier_ld11_pll_init,
 		.clk_init = uniphier_ld11_clk_init,
 	},
@@ -89,7 +114,7 @@ static const struct uniphier_initdata uniphier_initdata[] = {
 #if defined(CONFIG_ARCH_UNIPHIER_LD20)
 	{
 		.soc_id = UNIPHIER_LD20_ID,
-		.sbc_init = uniphier_ld11_sbc_init,
+		.sbc_init = uniphier_pxs2_sbc_init,
 		.pll_init = uniphier_ld20_pll_init,
 		.clk_init = uniphier_ld20_clk_init,
 		.misc_init = uniphier_ld20_misc_init,
@@ -118,7 +143,8 @@ int board_init(void)
 		return -EINVAL;
 	}
 
-	initdata->sbc_init();
+	if (initdata->sbc_init)
+		initdata->sbc_init();
 
 	support_card_init();
 
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index ee4605487f..a20cafdfad 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -34,29 +34,6 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd);
 int uniphier_pro5_init(const struct uniphier_board_data *bd);
 int uniphier_pxs2_init(const struct uniphier_board_data *bd);
 
-#if defined(CONFIG_MICRO_SUPPORT_CARD)
-void uniphier_sbc_init_savepin(void);
-void uniphier_ld4_sbc_init(void);
-void uniphier_pxs2_sbc_init(void);
-void uniphier_ld11_sbc_init(void);
-#else
-static inline void uniphier_sbc_init_savepin(void)
-{
-}
-
-static inline void uniphier_ld4_sbc_init(void)
-{
-}
-
-static inline void uniphier_pxs2_sbc_init(void)
-{
-}
-
-static inline void uniphier_ld11_sbc_init(void)
-{
-}
-#endif
-
 void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd);
 
 int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd);
diff --git a/arch/arm/mach-uniphier/micro-support-card.c b/arch/arm/mach-uniphier/micro-support-card.c
index fc266aae98..dbd156ffce 100644
--- a/arch/arm/mach-uniphier/micro-support-card.c
+++ b/arch/arm/mach-uniphier/micro-support-card.c
@@ -5,7 +5,7 @@
  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  */
 
-#include <dm/of.h>
+#include <dm.h>
 #include <fdt_support.h>
 #include <linux/ctype.h>
 #include <linux/delay.h>
@@ -90,6 +90,17 @@ static int support_card_show_revision(void)
 
 void support_card_init(void)
 {
+	struct udevice *dev;
+	int ret;
+
+	/* The system bus must be initialized for access to the support card. */
+	ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS,
+					  DM_GET_DRIVER(uniphier_system_bus_driver),
+					  &dev);
+	if (ret)
+		return;
+
+	/* Check DT to see if this board has the support card. */
 	support_card_detect();
 
 	if (!support_card_found)
diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile
index 1bc912c939..1303c36c89 100644
--- a/arch/arm/mach-uniphier/sbc/Makefile
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -1,17 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 obj-y					+= sbc-boot.o
-
-ifndef CONFIG_SPL_BUILD
-ifdef CONFIG_MICRO_SUPPORT_CARD
-obj-y					+= sbc.o
-
-obj-$(CONFIG_ARCH_UNIPHIER_LD4)		+= sbc-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_SLD8)	+= sbc-ld4.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS2)	+= sbc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= sbc-pxs2.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= sbc-ld11.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= sbc-ld11.o
-obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= sbc-pxs2.o
-endif
-endif
diff --git a/arch/arm/mach-uniphier/sbc/sbc-boot.c b/arch/arm/mach-uniphier/sbc/sbc-boot.c
index ec22b453e0..4d04c97764 100644
--- a/arch/arm/mach-uniphier/sbc/sbc-boot.c
+++ b/arch/arm/mach-uniphier/sbc/sbc-boot.c
@@ -5,7 +5,8 @@
 
 #include <linux/io.h>
 
-#include "sbc-regs.h"
+#define SBBASE0			0x58c00100
+#define SBBASE_BANK_ENABLE	(0x00000001)
 
 int uniphier_sbc_boot_is_swapped(void)
 {
diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld11.c b/arch/arm/mach-uniphier/sbc/sbc-ld11.c
deleted file mode 100644
index a0162e1cc8..0000000000
--- a/arch/arm/mach-uniphier/sbc/sbc-ld11.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- */
-
-#include <spl.h>
-#include <linux/io.h>
-
-#include "../init.h"
-#include "sbc-regs.h"
-
-void uniphier_ld11_sbc_init(void)
-{
-	if (!uniphier_sbc_is_enabled())
-		return;
-
-	uniphier_sbc_init_savepin();
-
-	/* necessary for ROM boot ?? */
-	/* system bus output enable */
-	writel(0x17, PC0CTRL);
-
-	/* pins for NAND and System Bus are multiplexed */
-	if (spl_boot_device() != BOOT_DEVICE_NAND)
-		uniphier_pin_init("system-bus");
-}
diff --git a/arch/arm/mach-uniphier/sbc/sbc-ld4.c b/arch/arm/mach-uniphier/sbc/sbc-ld4.c
deleted file mode 100644
index 72e9743c8f..0000000000
--- a/arch/arm/mach-uniphier/sbc/sbc-ld4.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2015-2017 Socionext Inc.
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "sbc-regs.h"
-
-void uniphier_ld4_sbc_init(void)
-{
-	u32 tmp;
-
-	if (!uniphier_sbc_is_enabled())
-		return;
-
-	uniphier_sbc_init_savepin();
-
-	/* system bus output enable */
-	tmp = readl(PC0CTRL);
-	tmp &= 0xfffffcff;
-	writel(tmp, PC0CTRL);
-}
diff --git a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c b/arch/arm/mach-uniphier/sbc/sbc-pxs2.c
deleted file mode 100644
index 3275f22ce9..0000000000
--- a/arch/arm/mach-uniphier/sbc/sbc-pxs2.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016-2017 Socionext Inc.
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "sbc-regs.h"
-
-void uniphier_pxs2_sbc_init(void)
-{
-	if (!uniphier_sbc_is_enabled())
-		return;
-
-	uniphier_sbc_init_savepin();
-
-	/* necessary for ROM boot ?? */
-	/* system bus output enable */
-	writel(0x17, PC0CTRL);
-
-	uniphier_pin_init("system-bus");	/* PXs3 */
-}
diff --git a/arch/arm/mach-uniphier/sbc/sbc-regs.h b/arch/arm/mach-uniphier/sbc/sbc-regs.h
index 1e9618653f..3a54b0e68d 100644
--- a/arch/arm/mach-uniphier/sbc/sbc-regs.h
+++ b/arch/arm/mach-uniphier/sbc/sbc-regs.h
@@ -9,74 +9,6 @@
 #ifndef ARCH_SBC_REGS_H
 #define ARCH_SBC_REGS_H
 
-#define	SBBASE_BASE		0x58c00100
-#define	SBBASE(x)		(SBBASE_BASE + (x) * 0x10)
-
-#define	SBBASE0			(SBBASE(0))
-#define	SBBASE1			(SBBASE(1))
-#define	SBBASE2			(SBBASE(2))
-#define	SBBASE3			(SBBASE(3))
-#define	SBBASE4			(SBBASE(4))
-#define	SBBASE5			(SBBASE(5))
-#define	SBBASE6			(SBBASE(6))
-#define	SBBASE7			(SBBASE(7))
-
-#define	SBBASE_BANK_ENABLE	(0x00000001)
-
-#define	SBCTRL_BASE		0x58c00200
-#define	SBCTRL(x, y)		(SBCTRL_BASE + (x) * 0x10 + (y) * 4)
-
-#define	SBCTRL00		SBCTRL(0, 0)
-#define	SBCTRL01		SBCTRL(0, 1)
-#define	SBCTRL02		SBCTRL(0, 2)
-#define	SBCTRL03		SBCTRL(0, 3)
-#define	SBCTRL04		(SBCTRL_BASE + 0x100)
-
-#define	SBCTRL10		SBCTRL(1, 0)
-#define	SBCTRL11		SBCTRL(1, 1)
-#define	SBCTRL12		SBCTRL(1, 2)
-#define	SBCTRL13		SBCTRL(1, 3)
-#define	SBCTRL14		(SBCTRL_BASE + 0x110)
-
-#define	SBCTRL20		SBCTRL(2, 0)
-#define	SBCTRL21		SBCTRL(2, 1)
-#define	SBCTRL22		SBCTRL(2, 2)
-#define	SBCTRL23		SBCTRL(2, 3)
-#define	SBCTRL24		(SBCTRL_BASE + 0x120)
-
-#define	SBCTRL30		SBCTRL(3, 0)
-#define	SBCTRL31		SBCTRL(3, 1)
-#define	SBCTRL32		SBCTRL(3, 2)
-#define	SBCTRL33		SBCTRL(3, 3)
-#define	SBCTRL34		(SBCTRL_BASE + 0x130)
-
-#define	SBCTRL40		SBCTRL(4, 0)
-#define	SBCTRL41		SBCTRL(4, 1)
-#define	SBCTRL42		SBCTRL(4, 2)
-#define	SBCTRL43		SBCTRL(4, 3)
-#define	SBCTRL44		(SBCTRL_BASE + 0x140)
-
-#define	SBCTRL50		SBCTRL(5, 0)
-#define	SBCTRL51		SBCTRL(5, 1)
-#define	SBCTRL52		SBCTRL(5, 2)
-#define	SBCTRL53		SBCTRL(5, 3)
-#define	SBCTRL54		(SBCTRL_BASE + 0x150)
-
-#define	SBCTRL60		SBCTRL(6, 0)
-#define	SBCTRL61		SBCTRL(6, 1)
-#define	SBCTRL62		SBCTRL(6, 2)
-#define	SBCTRL63		SBCTRL(6, 3)
-#define	SBCTRL64		(SBCTRL_BASE + 0x160)
-
-#define	SBCTRL70		SBCTRL(7, 0)
-#define	SBCTRL71		SBCTRL(7, 1)
-#define	SBCTRL72		SBCTRL(7, 2)
-#define	SBCTRL73		SBCTRL(7, 3)
-#define	SBCTRL74		(SBCTRL_BASE + 0x170)
-
-#define PC0CTRL				0x598000c0
-
 int uniphier_sbc_boot_is_swapped(void);
-int uniphier_sbc_is_enabled(void);
 
 #endif	/* ARCH_SBC_REGS_H */
diff --git a/arch/arm/mach-uniphier/sbc/sbc.c b/arch/arm/mach-uniphier/sbc/sbc.c
deleted file mode 100644
index 519e67e367..0000000000
--- a/arch/arm/mach-uniphier/sbc/sbc.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2011-2015 Panasonic Corporation
- * Copyright (C) 2015-2017 Socionext Inc.
- *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- */
-
-#include <linux/io.h>
-#include <asm/global_data.h>
-
-#include "../init.h"
-#include "sbc-regs.h"
-
-/* slower but LED works */
-#define SBCTRL0_SAVEPIN_PERI_VALUE	0x55450000
-#define SBCTRL1_SAVEPIN_PERI_VALUE	0x07168d00
-#define SBCTRL2_SAVEPIN_PERI_VALUE	0x34000009
-#define SBCTRL4_SAVEPIN_PERI_VALUE	0x02110110
-
-/* faster but LED does not work */
-#define SBCTRL0_SAVEPIN_MEM_VALUE	0x55450000
-#define SBCTRL1_SAVEPIN_MEM_VALUE	0x06057700
-#define SBCTRL2_SAVEPIN_MEM_VALUE	0x34000009
-#define SBCTRL4_SAVEPIN_MEM_VALUE	0x02110210
-
-int uniphier_sbc_is_enabled(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	const void *fdt = gd->fdt_blob;
-	int offset;
-
-	offset = fdt_node_offset_by_compatible(fdt, 0,
-					       "socionext,uniphier-system-bus");
-	if (offset < 0)
-		return 0;
-
-	return fdtdec_get_is_enabled(fdt, offset);
-}
-
-void uniphier_sbc_init_savepin(void)
-{
-	/*
-	 * Only CS1 is connected to support card.
-	 * BKSZ[1:0] should be set to "01".
-	 */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
-
-	if (uniphier_sbc_boot_is_swapped()) {
-		/*
-		 * Boot Swap On: boot from external NOR/SRAM
-		 * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
-		 *
-		 * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
-		 * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
-		 */
-		writel(0x0000bc01, SBBASE0);
-	} else {
-		/*
-		 * Boot Swap Off: boot from mask ROM
-		 * 0x40000000-0x41ffffff: mask ROM
-		 * 0x42000000-0x43efffff: memory bank (31MB)
-		 * 0x43f00000-0x43ffffff: peripherals (1MB)
-		 */
-		writel(0x0000be01, SBBASE0); /* dummy */
-		writel(0x0200be01, SBBASE1);
-	}
-}