Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

42 files changed, 1020 insertions, 1185 deletions

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index edf249d902..a7e0c28c90 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -142,24 +142,6 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
-#ifdef CONFIG_OMAP2420H4
-       /* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		/* r0 <- current position of code   */
-		add     r0, r0, #4				/* skip reset vector			*/
-	mov	r2, #64			/* r2 <- size to copy  */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next			/* loop until equal */
-	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
-#endif
 	/* the mask ROM code should have PLL and others stable */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl  cpu_init_crit
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index dec7bfbfaa..bba4671f78 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_SOC_DM355)	+= dm355.o
 COBJS-$(CONFIG_SOC_DM365)	+= dm365.o
 COBJS-$(CONFIG_SOC_DM644X)	+= dm644x.o
 COBJS-$(CONFIG_SOC_DM646X)	+= dm646x.o
+COBJS-$(CONFIG_SOC_DA830)	+= da830_pinmux.o
 COBJS-$(CONFIG_SOC_DA850)	+= da850_pinmux.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= lxt972.o dp83848.o et1011c.o ksz8873.o
 
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
new file mode 100644
index 0000000000..d0c964a349
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
@@ -0,0 +1,151 @@
+/*
+ * Pinmux configurations for the DA830 SoCs
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pinmux_defs.h>
+
+/* SPI0 pin muxer settings */
+const struct pinmux_config spi0_pins_base[] = {
+	{ pinmux(7), 1, 3 },  /* SPI0_SOMI */
+	{ pinmux(7), 1, 4 },  /* SPI0_SIMO */
+	{ pinmux(7), 1, 6 }   /* SPI0_CLK */
+};
+
+const struct pinmux_config spi0_pins_scs0[] = {
+	{ pinmux(7), 1, 7 }   /* SPI0_SCS[0] */
+};
+
+const struct pinmux_config spi0_pins_ena[] = {
+	{ pinmux(7), 1, 5 }   /* SPI0_ENA */
+};
+
+/* NAND pin muxer settings */
+const struct pinmux_config emifa_pins_cs0[] = {
+	{ pinmux(18), 1, 2 }   /* EMA_CS[0] */
+};
+
+const struct pinmux_config emifa_pins_cs2[] = {
+	{ pinmux(18), 1, 3 }   /* EMA_CS[2] */
+};
+
+const struct pinmux_config emifa_pins_cs3[] = {
+	{ pinmux(18), 1, 4 }   /* EMA_CS[3] */
+};
+
+#ifdef CONFIG_USE_NAND
+const struct pinmux_config emifa_pins[] = {
+	{ pinmux(13), 1, 6 },  /* EMA_D[0] */
+	{ pinmux(13), 1, 7 },  /* EMA_D[1] */
+	{ pinmux(14), 1, 0 },  /* EMA_D[2] */
+	{ pinmux(14), 1, 1 },  /* EMA_D[3] */
+	{ pinmux(14), 1, 2 },  /* EMA_D[4] */
+	{ pinmux(14), 1, 3 },  /* EMA_D[5] */
+	{ pinmux(14), 1, 4 },  /* EMA_D[6] */
+	{ pinmux(14), 1, 5 },  /* EMA_D[7] */
+	{ pinmux(14), 1, 6 },  /* EMA_D[8] */
+	{ pinmux(14), 1, 7 },  /* EMA_D[9] */
+	{ pinmux(15), 1, 0 },  /* EMA_D[10] */
+	{ pinmux(15), 1, 1 },  /* EMA_D[11] */
+	{ pinmux(15), 1, 2 },  /* EMA_D[12] */
+	{ pinmux(15), 1, 3 },  /* EMA_D[13] */
+	{ pinmux(15), 1, 4 },  /* EMA_D[14] */
+	{ pinmux(15), 1, 5 },  /* EMA_D[15] */
+	{ pinmux(15), 1, 6 },  /* EMA_A[0] */
+	{ pinmux(15), 1, 7 },  /* EMA_A[1] */
+	{ pinmux(16), 1, 0 },  /* EMA_A[2] */
+	{ pinmux(16), 1, 1 },  /* EMA_A[3] */
+	{ pinmux(16), 1, 2 },  /* EMA_A[4] */
+	{ pinmux(16), 1, 3 },  /* EMA_A[5] */
+	{ pinmux(16), 1, 4 },  /* EMA_A[6] */
+	{ pinmux(16), 1, 5 },  /* EMA_A[7] */
+	{ pinmux(16), 1, 6 },  /* EMA_A[8] */
+	{ pinmux(16), 1, 7 },  /* EMA_A[9] */
+	{ pinmux(17), 1, 0 },  /* EMA_A[10] */
+	{ pinmux(17), 1, 1 },  /* EMA_A[11] */
+	{ pinmux(17), 1, 2 },  /* EMA_A[12] */
+	{ pinmux(17), 1, 3 },  /* EMA_BA[1] */
+	{ pinmux(17), 1, 4 },  /* EMA_BA[0] */
+	{ pinmux(17), 1, 5 },  /* EMA_CLK */
+	{ pinmux(17), 1, 6 },  /* EMA_SDCKE */
+	{ pinmux(17), 1, 7 },  /* EMA_CAS */
+	{ pinmux(18), 1, 0 },  /* EMA_CAS */
+	{ pinmux(18), 1, 1 },  /* EMA_WE */
+	{ pinmux(18), 1, 5 },  /* EMA_OE */
+	{ pinmux(18), 1, 6 },  /* EMA_WE_DQM[1] */
+	{ pinmux(18), 1, 7 },  /* EMA_WE_DQM[0] */
+	{ pinmux(10), 1, 0 }   /* Tristate */
+};
+#endif
+
+/* EMAC PHY interface pins */
+const struct pinmux_config emac_pins_rmii[] = {
+	{ pinmux(10), 2, 1 },  /* RMII_TXD[0] */
+	{ pinmux(10), 2, 2 },  /* RMII_TXD[1] */
+	{ pinmux(10), 2, 3 },  /* RMII_TXEN */
+	{ pinmux(10), 2, 4 },  /* RMII_CRS_DV */
+	{ pinmux(10), 2, 5 },  /* RMII_RXD[0] */
+	{ pinmux(10), 2, 6 },  /* RMII_RXD[1] */
+	{ pinmux(10), 2, 7 }   /* RMII_RXER */
+};
+
+const struct pinmux_config emac_pins_mdio[] = {
+	{ pinmux(11), 2, 0 },  /* MDIO_CLK */
+	{ pinmux(11), 2, 1 }   /* MDIO_D */
+};
+
+const struct pinmux_config emac_pins_rmii_clk_source[] = {
+	{ pinmux(9), 0, 5 }    /* ref.clk from external source */
+};
+
+/* UART2 pin muxer settings */
+const struct pinmux_config uart2_pins_txrx[] = {
+	{ pinmux(8), 2, 7 },   /* UART2_RXD */
+	{ pinmux(9), 2, 0 }    /* UART2_TXD */
+};
+
+/* I2C0 pin muxer settings */
+const struct pinmux_config i2c0_pins[] = {
+	{ pinmux(8), 2, 3 },   /* I2C0_SDA */
+	{ pinmux(8), 2, 4 }    /* I2C0_SCL */
+};
+
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+	{ pinmux(9), 1, 1 }    /* USB0_DRVVBUS */
+};
+
+#ifdef CONFIG_DAVINCI_MMC
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins_8bit[] = {
+	{ pinmux(15), 2, 7 },  /* MMCSD0_CLK */
+	{ pinmux(16), 2, 0 },  /* MMCSD0_CMD */
+	{ pinmux(13), 2, 6 },  /* MMCSD0_DAT_0 */
+	{ pinmux(13), 2, 7 },  /* MMCSD0_DAT_1 */
+	{ pinmux(14), 2, 0 },  /* MMCSD0_DAT_2 */
+	{ pinmux(14), 2, 1 },  /* MMCSD0_DAT_3 */
+	{ pinmux(14), 2, 2 },  /* MMCSD0_DAT_4 */
+	{ pinmux(14), 2, 3 },  /* MMCSD0_DAT_5 */
+	{ pinmux(14), 2, 4 },  /* MMCSD0_DAT_6 */
+	{ pinmux(14), 2, 5 }   /* MMCSD0_DAT_7 */
+	/* DA830 supports 8-bit mode */
+};
+#endif
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 55e82ba369..c4b9809ad0 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -34,6 +34,7 @@ COBJS	+= hwinit-common.o
 COBJS	+= clocks-common.o
 COBJS	+= emif-common.o
 COBJS	+= vc.o
+COBJS	+= abb.o
 endif
 
 ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c
new file mode 100644
index 0000000000..87d1fb82eb
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/abb.c
@@ -0,0 +1,137 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	return -1;
+}
+
+static void abb_setup_timings(u32 setup)
+{
+	u32 sys_rate, sr2_cnt, clk_cycles;
+
+	/*
+	 * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
+	 * transition and must be programmed with the correct time at boot.
+	 * The value programmed into the register is the number of SYS_CLK
+	 * clock cycles that match a given wall time profiled for the ldo.
+	 * This value depends on:
+	 * settling time of ldo in micro-seconds (varies per OMAP family),
+	 * of clock cycles per SYS_CLK period (varies per OMAP family),
+	 * the SYS_CLK frequency in MHz (varies per board)
+	 * The formula is:
+	 *
+	 *		       ldo settling time (in micro-seconds)
+	 * SR2_WTCNT_VALUE = ------------------------------------------
+	 *		    (# system clock cycles) * (sys_clk period)
+	 *
+	 * Put another way:
+	 *
+	 * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
+	 *
+	 * To avoid dividing by zero multiply both "# clock cycles" and
+	 * "settling time" by 10 such that the final result is the one we want.
+	 */
+
+	/* calculate SR2_WTCNT_VALUE */
+	sys_rate = DIV_ROUND(V_OSCK, 1000000);
+	clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+	sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+
+	setbits_le32(setup,
+		     sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+}
+
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp)
+{
+	u32 abb_type_mask, opp_sel_mask;
+
+	/* sanity check */
+	if (!setup || !control || !txdone)
+		return;
+
+	/* setup ABB only in case of Fast or Slow OPP */
+	switch (opp) {
+	case OMAP_ABB_FAST_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK;
+		break;
+	case OMAP_ABB_SLOW_OPP:
+		abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK;
+		opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK;
+		break;
+	default:
+	       return;
+	}
+
+	/*
+	 * For some OMAP silicons additional setup for LDOVBB register is
+	 * required. This is determined by data retrieved from corresponding
+	 * OPP EFUSE register. Data, which is retrieved from EFUSE - is
+	 * ABB enable/disable flag and VSET value, which must be copied
+	 * to LDOVBB register. If function call fails - return quietly,
+	 * it means no ABB is required for such silicon.
+	 *
+	 * For silicons, which don't require LDOVBB setup "fuse" and
+	 * "ldovbb" offsets are not defined. ABB will be initialized in
+	 * the common way for them.
+	 */
+	if (fuse && ldovbb) {
+		if (abb_setup_ldovbb(fuse, ldovbb))
+			return;
+	}
+
+	/* clear ABB registers */
+	writel(0, setup);
+	writel(0, control);
+
+	/* configure timings, based on oscillator value */
+	abb_setup_timings(setup);
+
+	/* clear pending interrupts before setup */
+	setbits_le32(txdone, txdone_mask);
+
+	/* select ABB type */
+	setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK);
+
+	/* initiate ABB ldo change */
+	setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK);
+
+	/* wait until transition complete */
+	if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY))
+		puts("Error: ABB txdone is not set\n");
+
+	/* clear ABB tranxdone */
+	setbits_le32(txdone, txdone_mask);
+}
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 99910cdcb0..ef23127bb6 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -30,9 +30,10 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <i2c.h>
 #include <asm/omap_common.h>
 #include <asm/gpio.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/utils.h>
 #include <asm/omap_gpio.h>
@@ -49,13 +50,12 @@
 
 const u32 sys_clk_array[8] = {
 	12000000,	       /* 12 MHz */
-	13000000,	       /* 13 MHz */
+	20000000,		/* 20 MHz */
 	16800000,	       /* 16.8 MHz */
 	19200000,	       /* 19.2 MHz */
 	26000000,	       /* 26 MHz */
 	27000000,	       /* 27 MHz */
 	38400000,	       /* 38.4 MHz */
-	20000000,		/* 20 MHz */
 };
 
 static inline u32 __get_sys_clk_index(void)
@@ -74,13 +74,6 @@ static inline u32 __get_sys_clk_index(void)
 		/* SYS_CLKSEL - 1 to match the dpll param array indices */
 		ind = (readl((*prcm)->cm_sys_clksel) &
 			CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
-		/*
-		 * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
-		 * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
-		 * NUM_SYS_CLK. So considering the last 3 bits as the index
-		 * for the dpll param array.
-		 */
-		ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
 	}
 	return ind;
 }
@@ -440,6 +433,12 @@ static void setup_non_essential_dplls(void)
 	params = get_abe_dpll_params(*dplls_data);
 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+
+	if (omap_revision() == DRA752_ES1_0)
+		/* Select the sys clk for dpll_abe */
+		clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
+				CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
+				CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
 #else
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
 	/*
@@ -487,6 +486,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
 	u32 offset = volt_mv;
 	int ret = 0;
 
+	if (!volt_mv)
+		return;
+
+	pmic->pmic_bus_init();
 	/* See if we can first get the GPIO if needed */
 	if (pmic->gpio_en)
 		ret = gpio_request(pmic->gpio, "PMIC_GPIO");
@@ -509,14 +512,45 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
 	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
 		offset_code);
 
-	if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
-				vcore_reg, offset_code))
+	if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
 		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
 
 	if (pmic->gpio_en)
 		gpio_direction_output(pmic->gpio, 1);
 }
 
+static u32 optimize_vcore_voltage(struct volts const *v)
+{
+	u32 val;
+	if (!v->value)
+		return 0;
+	if (!v->efuse.reg)
+		return v->value;
+
+	switch (v->efuse.reg_bits) {
+	case 16:
+		val = readw(v->efuse.reg);
+		break;
+	case 32:
+		val = readl(v->efuse.reg);
+		break;
+	default:
+		printf("Error: efuse 0x%08x bits=%d unknown\n",
+		       v->efuse.reg, v->efuse.reg_bits);
+		return v->value;
+	}
+
+	if (!val) {
+		printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+		       v->efuse.reg, v->efuse.reg_bits, v->value);
+		return v->value;
+	}
+
+	debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+	      __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val);
+	return val;
+}
+
 /*
  * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
  * We set the maximum voltages allowed here because Smart-Reflex is not
@@ -525,16 +559,34 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
  */
 void scale_vcores(struct vcores_data const *vcores)
 {
-	omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+	u32 val;
+
+	val = optimize_vcore_voltage(&vcores->core);
+	do_scale_vcore(vcores->core.addr, val, vcores->core.pmic);
+
+	val = optimize_vcore_voltage(&vcores->mpu);
+	do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
+
+	/* Configure MPU ABB LDO after scale */
+	abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
+		  (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+		  (*prcm)->prm_abbldo_mpu_setup,
+		  (*prcm)->prm_abbldo_mpu_ctrl,
+		  (*prcm)->prm_irqstatus_mpu_2,
+		  OMAP_ABB_MPU_TXDONE_MASK,
+		  OMAP_ABB_FAST_OPP);
 
-	do_scale_vcore(vcores->core.addr, vcores->core.value,
-					  vcores->core.pmic);
+	val = optimize_vcore_voltage(&vcores->mm);
+	do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic);
 
-	do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
-					  vcores->mpu.pmic);
+	val = optimize_vcore_voltage(&vcores->gpu);
+	do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic);
 
-	do_scale_vcore(vcores->mm.addr, vcores->mm.value,
-					  vcores->mm.pmic);
+	val = optimize_vcore_voltage(&vcores->eve);
+	do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic);
+
+	val = optimize_vcore_voltage(&vcores->iva);
+	do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
 
 	 if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
 		/* Configure LDO SRAM "magic" bits */
@@ -710,6 +762,7 @@ void prcm_init(void)
 	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
 	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
 		enable_basic_clocks();
+		timer_init();
 		scale_vcores(*omap_vcores);
 		setup_dplls();
 #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
@@ -725,3 +778,13 @@ void prcm_init(void)
 	if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
 		enable_basic_uboot_clocks();
 }
+
+void gpi2c_init(void)
+{
+	static int gpi2c = 1;
+
+	if (gpi2c) {
+		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		gpi2c = 0;
+	}
+}
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 11e830a533..652e5a71b3 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -27,7 +27,7 @@
 
 #include <common.h>
 #include <asm/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
 #include <asm/utils.h>
@@ -209,7 +209,8 @@ void emif_update_timings(u32 base, const struct emif_regs *regs)
 	writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
 	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
 
-	if (omap_revision() >= OMAP5430_ES1_0) {
+	if ((omap_revision() >= OMAP5430_ES1_0) ||
+				(omap_revision() == DRA752_ES1_0)) {
 		writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
 			&emif->emif_l3_config);
 	} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -263,6 +264,18 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs)
 	__udelay(130);
 }
 
+static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+{
+	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+	writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+	config_data_eye_leveling_samples(base);
+
+	writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+	writel(regs->sdram_config, &emif->emif_sdram_config);
+}
+
 static void ddr3_init(u32 base, const struct emif_regs *regs)
 {
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -273,6 +286,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	 * defined, contents of mode Registers must be fully initialized.
 	 * H/W takes care of this initialization
 	 */
+	writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
 	writel(regs->sdram_config_init, &emif->emif_sdram_config);
 
 	writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
@@ -290,7 +304,10 @@ static void ddr3_init(u32 base, const struct emif_regs *regs)
 	/* enable leveling */
 	writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
 
-	ddr3_leveling(base, regs);
+	if (omap_revision() == DRA752_ES1_0)
+		ddr3_sw_leveling(base, regs);
+	else
+		ddr3_leveling(base, regs);
 }
 
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1078,7 +1095,10 @@ static void do_sdram_init(u32 base)
 	if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
 		set_lpmode_selfrefresh(base);
 		emif_reset_phy(base);
-		ddr3_leveling(base, regs);
+		if (omap_revision() == DRA752_ES1_0)
+			ddr3_sw_leveling(base, regs);
+		else
+			ddr3_leveling(base, regs);
 	}
 
 	/* Write to the shadow registers */
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 0776d5c6e8..5df116edbe 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -166,8 +166,6 @@ void s_init(void)
 #endif
 	prcm_init();
 #ifdef CONFIG_SPL_BUILD
-	timer_init();
-
 	/* For regular u-boot sdram_init() is called from dram_init() */
 	sdram_init();
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 507f6873e9..5926a5a810 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -35,6 +35,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index e6e5f7893c..a68f1d145d 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -17,6 +17,7 @@
 #include <common.h>
 #include <asm/omap_common.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
 
 /*
  * Define Master code if there are multiple masters on the I2C_SR bus.
@@ -57,7 +58,7 @@
  * omap_vc_init() - Initialization for Voltage controller
  * @speed_khz: I2C buspeed in KHz
  */
-void omap_vc_init(u16 speed_khz)
+static void omap_vc_init(u16 speed_khz)
 {
 	u32 val;
 	u32 sys_clk_khz, cycles_hi, cycles_low;
@@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
 	/* All good.. */
 	return 0;
 }
+
+void sri2c_init(void)
+{
+	static int sri2c = 1;
+
+	if (sri2c) {
+		omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+		sri2c = 0;
+	}
+	return;
+}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 09c51f62aa..81cc859780 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -27,7 +27,7 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/clocks_omap3.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sys_proto.h>
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 06a2fc8c2f..b97cad4364 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -29,7 +29,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_gpio.h>
 #include <asm/io.h>
 
@@ -219,6 +219,9 @@ struct pmic_data twl6030_4430es1 = {
 	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct pmic_data twl6030 = {
@@ -226,6 +229,9 @@ struct pmic_data twl6030 = {
 	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct pmic_data tps62361 = {
@@ -233,7 +239,10 @@ struct pmic_data tps62361 = {
 	.step = 10000, /* 10 mV represented in uV */
 	.start_code = 0,
 	.gpio = TPS62361_VSEL0_GPIO,
-	.gpio_en = 1
+	.gpio_en = 1,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
 };
 
 struct vcores_data omap4430_volts_es1 = {
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 7225a301b1..7e71ca0a26 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_ldosram_iva_voltage_ctrl	= 0x4A002320,
 	.control_ldosram_mpu_voltage_ctrl	= 0x4A002324,
 	.control_ldosram_core_voltage_ctrl	= 0x4A002328,
+	.control_usbotghs_ctrl			= 0x4A00233C,
+	.control_padconf_core_base		= 0x4A100000,
 	.control_pbiaslite			= 0x4A100600,
 	.control_lpddr2io1_0			= 0x4A100638,
 	.control_lpddr2io1_1			= 0x4A10063C,
@@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = {
 	.control_lpddr2io2_3			= 0x4A100654,
 	.control_efuse_1			= 0x4A100700,
 	.control_efuse_2			= 0x4A100704,
+	.control_padconf_wkup_base		= 0x4A31E000,
 };
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
index ce00e2c3c5..6ff8dbb4eb 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -30,6 +30,7 @@ COBJS	+= emif.o
 COBJS	+= sdram.o
 COBJS	+= prcm-regs.o
 COBJS	+= hw_data.o
+COBJS	+= abb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
new file mode 100644
index 0000000000..92470becc0
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/abb.c
@@ -0,0 +1,67 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ *    and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ *    enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ *    to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+	u32 vset;
+
+	/*
+	 * ABB parameters must be properly fused
+	 * otherwise ABB should be disabled
+	 */
+	vset = readl(fuse);
+	if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+		return -1;
+
+	/* prepare VSET value for LDOVBB mux register */
+	vset &= OMAP5_ABB_FUSE_VSET_MASK;
+	vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+	vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+	vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+	/* setup LDOVBB using fused value */
+	clrsetbits_le32(ldovbb,  OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 604fa42b1b..56cf1f8c60 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -26,10 +26,11 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <palmas.h>
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_gpio.h>
 #include <asm/io.h>
 #include <asm/emif.h>
@@ -99,14 +100,13 @@ static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = {
 };
 
 static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
-	{250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
-	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+	{625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
 };
 
 static const struct dpll_params
@@ -132,15 +132,14 @@ static const struct dpll_params
 };
 
 static const struct dpll_params
-		core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
-	{266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 16.8 MHz */
-	{277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 19.2 MHz */
-	{368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 26 MHz   */
+		core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 12 MHz   */
+	{266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 20 MHz   */
+	{443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 16.8 MHz */
+	{277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 19.2 MHz */
+	{368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6},		/* 38.4 MHz */
-	{266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}		/* 20 MHz   */
+	{277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6},		/* 38.4 MHz */
 };
 
 static const struct dpll_params
@@ -186,14 +185,13 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
 };
 
 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
-	{32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
-	{20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
-	{192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
+	{32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 12 MHz   */
+	{96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 20 MHz   */
+	{160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
-	{96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}		/* 20 MHz   */
+	{10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1},		/* 38.4 MHz */
 };
 
 static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
@@ -206,6 +204,16 @@ static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
 	{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
 };
 
+static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
+	{1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz */
+	{208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
+};
+
 /* ABE M & N values with sys_clk as source */
 static const struct dpll_params
 		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
@@ -223,26 +231,36 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = {
 	750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
 };
 
+/* ABE M & N values with sysclk2(22.5792 MHz) as input */
+static const struct dpll_params
+		abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
+};
+
 static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
 	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 20 MHz   */
 	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
 	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
 	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
 	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 38.4 MHz */
-	{48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
 };
 
-static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
-	{533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
-	{111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
+	{266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 20 MHz   */
+	{190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
 	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
-	{533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}		/* 20 MHz   */
+	{665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1},		/* 38.4 MHz */
 };
 
 struct dplls omap5_dplls_es1 = {
@@ -275,10 +293,12 @@ struct dplls omap5_dplls_es2 = {
 
 struct dplls dra7xx_dplls = {
 	.mpu = mpu_dpll_params_1ghz,
-	.core = core_dpll_params_2128mhz_ddr532_dra7xx,
+	.core = core_dpll_params_2128mhz_dra7xx,
 	.per = per_dpll_params_768mhz_dra7xx,
+	.abe = abe_dpll_params_sysclk2_361267khz,
+	.iva = iva_dpll_params_2330mhz_dra7xx,
 	.usb = usb_dpll_params_1920mhz,
-	.ddr = ddr_dpll_params_1066mhz,
+	.ddr = ddr_dpll_params_2128mhz,
 };
 
 struct pmic_data palmas = {
@@ -289,6 +309,22 @@ struct pmic_data palmas = {
 	 * Offset code 0 switches OFF the SMPS
 	 */
 	.start_code = 6,
+	.i2c_slave_addr	= SMPS_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= sri2c_init,
+	.pmic_write	= omap_vc_bypass_send_value,
+};
+
+struct pmic_data tps659038 = {
+	.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+	.step = 10000, /* 10 mV represented in uV */
+	/*
+	 * Offset codes 1-6 all give the base voltage in Palmas
+	 * Offset code 0 switches OFF the SMPS
+	 */
+	.start_code = 6,
+	.i2c_slave_addr	= TPS659038_I2C_SLAVE_ADDR,
+	.pmic_bus_init	= gpi2c_init,
+	.pmic_write	= palmas_i2c_write_u8,
 };
 
 struct vcores_data omap5430_volts = {
@@ -319,6 +355,38 @@ struct vcores_data omap5430_volts_es2 = {
 	.mm.pmic = &palmas,
 };
 
+struct vcores_data dra752_volts = {
+	.mpu.value	= VDD_MPU_DRA752,
+	.mpu.efuse.reg	= STD_FUSE_OPP_VMIN_MPU_NOM,
+	.mpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.mpu.addr	= TPS659038_REG_ADDR_SMPS12_MPU,
+	.mpu.pmic	= &tps659038,
+
+	.eve.value	= VDD_EVE_DRA752,
+	.eve.efuse.reg	= STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+	.eve.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.eve.addr	= TPS659038_REG_ADDR_SMPS45_EVE,
+	.eve.pmic	= &tps659038,
+
+	.gpu.value	= VDD_GPU_DRA752,
+	.gpu.efuse.reg	= STD_FUSE_OPP_VMIN_GPU_NOM,
+	.gpu.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.gpu.addr	= TPS659038_REG_ADDR_SMPS6_GPU,
+	.gpu.pmic	= &tps659038,
+
+	.core.value	= VDD_CORE_DRA752,
+	.core.efuse.reg	= STD_FUSE_OPP_VMIN_CORE_NOM,
+	.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+	.core.addr	= TPS659038_REG_ADDR_SMPS7_CORE,
+	.core.pmic	= &tps659038,
+
+	.iva.value	= VDD_IVA_DRA752,
+	.iva.efuse.reg	= STD_FUSE_OPP_VMIN_IVA_NOM,
+	.iva.efuse.reg_bits	= DRA752_EFUSE_REGBITS,
+	.iva.addr	= TPS659038_REG_ADDR_SMPS8_IVA,
+	.iva.pmic	= &tps659038,
+};
+
 /*
  * Enable essential clock domains, modules and
  * do some additional special settings needed
@@ -383,12 +451,6 @@ void enable_basic_clocks(void)
 			 clk_modules_explicit_en_essential,
 			 1);
 
-	/* Select 384Mhz for GPU as its the POR for ES1.0 */
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_HYD_GCLK_MASK);
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_CORE_GCLK_MASK);
-
 	/* Enable SCRM OPT clocks for PER and CORE dpll */
 	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
 			OPTFCLKEN_SCRM_PER_MASK);
@@ -540,6 +602,17 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = {
 	.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
 };
 
+const struct ctrl_ioregs ioregs_dra7xx_es1 = {
+	.ctrl_ddrch = 0x40404040,
+	.ctrl_lpddr2ch = 0x40404040,
+	.ctrl_ddr3ch = 0x80808080,
+	.ctrl_ddrio_0 = 0xbae8c631,
+	.ctrl_ddrio_1 = 0xb46318d8,
+	.ctrl_ddrio_2 = 0x84210000,
+	.ctrl_emif_sdram_config_ext = 0xb2c00000,
+	.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
 void hw_data_init(void)
 {
 	u32 omap_rev = omap_revision();
@@ -565,7 +638,7 @@ void hw_data_init(void)
 	case DRA752_ES1_0:
 	*prcm = &dra7xx_prcm;
 	*dplls_data = &dra7xx_dplls;
-	*omap_vcores = &omap5430_volts_es2;
+	*omap_vcores = &dra752_volts;
 	*ctrl = &dra7xx_ctrl;
 	break;
 
@@ -582,14 +655,16 @@ void get_ioregs(const struct ctrl_ioregs **regs)
 	case OMAP5430_ES1_0:
 	case OMAP5430_ES2_0:
 		*regs = &ioregs_omap5430;
-	break;
+		break;
 	case OMAP5432_ES1_0:
 		*regs = &ioregs_omap5432_es1;
-	break;
+		break;
 	case OMAP5432_ES2_0:
-	case DRA752_ES1_0:
 		*regs = &ioregs_omap5432_es2;
-	break;
+		break;
+	case DRA752_ES1_0:
+		*regs = &ioregs_dra7xx_es1;
+		break;
 
 	default:
 		printf("\n INVALID OMAP REVISION ");
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index e192fea0eb..daf124e99c 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,7 +32,7 @@
 #include <asm/armv7.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/sizes.h>
 #include <asm/utils.h>
 #include <asm/arch/gpio.h>
@@ -100,16 +100,21 @@ static void io_settings_ddr3(void)
 	writel(ioregs->ctrl_emif_sdram_config_ext,
 	       (*ctrl)->control_emif2_sdram_config_ext);
 
-	/* Disable DLL select */
-	io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
+	if (is_omap54xx()) {
+		/* Disable DLL select */
+		io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
 							& 0xFFEFFFFF);
-	writel(io_settings,
-		(*ctrl)->control_port_emif1_sdram_config);
+		writel(io_settings,
+			(*ctrl)->control_port_emif1_sdram_config);
 
-	io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
+		io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
 							& 0xFFEFFFFF);
-	writel(io_settings,
-		(*ctrl)->control_port_emif2_sdram_config);
+		writel(io_settings,
+			(*ctrl)->control_port_emif2_sdram_config);
+	} else {
+		writel(ioregs->ctrl_ddr_ctrl_ext_0,
+				(*ctrl)->control_ddr_control_ext_0);
+	}
 }
 
 /*
@@ -201,6 +206,9 @@ void srcomp_enable(void)
 	u32 sysclk_ind	= get_sys_clk_index();
 	u32 omap_rev	= omap_revision();
 
+	if (!is_omap54xx())
+		return;
+
 	mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
 	div_factor = srcomp_parameters[sysclk_ind].divide_factor;
 
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index e9f6a32653..e839ff5fe5 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -298,6 +298,7 @@ struct prcm_regs const omap5_es1_prcm = {
 	.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
 	.prm_rstctrl = 0x4ae07b00,
 	.prm_rstst = 0x4ae07b04,
+	.prm_rsttime = 0x4ae07b08,
 	.prm_vc_val_bypass = 0x4ae07ba0,
 	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
@@ -307,10 +308,16 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_sldo_mpu_ctrl = 0x4ae07bd0,
 	.prm_sldo_mm_setup = 0x4ae07bd4,
 	.prm_sldo_mm_ctrl = 0x4ae07bd8,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
 };
 
 struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_status				= 0x4A002134,
+	.control_std_fuse_opp_vdd_mpu_2		= 0x4A0021B4,
+	.control_padconf_core_base		= 0x4A002800,
 	.control_paconf_global			= 0x4A002DA0,
 	.control_paconf_mode			= 0x4A002DA4,
 	.control_smart1io_padconf_0		= 0x4A002DA8,
@@ -358,6 +365,8 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
 	.control_port_emif2_sdram_config	= 0x4AE0C118,
 	.control_emif1_sdram_config_ext		= 0x4AE0C144,
 	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_wkup_ldovbb_mpu_voltage_ctrl	= 0x4AE0C318,
+	.control_padconf_wkup_base		= 0x4AE0C800,
 	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
 	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
 	.control_padconf_mode			= 0x4AE0CDA8,
@@ -434,6 +443,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = {
 	.control_srcomp_east_side		= 0x4A002E7C,
 	.control_srcomp_west_side		= 0x4A002E80,
 	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_ddr_control_ext_0		= 0x4A002E88,
 	.control_padconf_core_base		= 0x4A003400,
 	.control_port_emif1_sdram_config	= 0x4AE0C110,
 	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
@@ -709,6 +719,9 @@ struct prcm_regs const omap5_es2_prcm = {
 	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
 	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
 
+	/* prm irqstatus regs */
+	.prm_irqstatus_mpu_2 = 0x4ae06014,
+
 	/* l4 wkup regs */
 	.cm_abe_pll_ref_clksel = 0x4ae0610c,
 	.cm_sys_clksel = 0x4ae06110,
@@ -740,6 +753,12 @@ struct prcm_regs const omap5_es2_prcm = {
 	.prm_sldo_mpu_ctrl = 0x4ae07cd0,
 	.prm_sldo_mm_setup = 0x4ae07cd4,
 	.prm_sldo_mm_ctrl = 0x4ae07cd8,
+	.prm_abbldo_mpu_setup = 0x4ae07cdc,
+	.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
+
+	/* SCRM stuff, used by some boards */
+	.scrm_auxclk0 = 0x4ae0a310,
+	.scrm_auxclk1 = 0x4ae0a314,
 };
 
 struct prcm_regs const dra7xx_prcm = {
@@ -941,6 +960,7 @@ struct prcm_regs const dra7xx_prcm = {
 	/* l4 wkup regs */
 	.cm_abe_pll_ref_clksel			= 0x4ae0610c,
 	.cm_sys_clksel				= 0x4ae06110,
+	.cm_abe_pll_sys_clksel			= 0x4ae06118,
 	.cm_wkup_clkstctrl			= 0x4ae07800,
 	.cm_wkup_l4wkup_clkctrl			= 0x4ae07820,
 	.cm_wkup_wdtimer1_clkctrl		= 0x4ae07828,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6b461e4846..1b445a61eb 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -108,6 +108,7 @@ const struct emif_regs emif_regs_266_mhz_2cs = {
 const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
 	.sdram_config_init		= 0x61851B32,
 	.sdram_config			= 0x61851B32,
+	.sdram_config2			= 0x0,
 	.ref_ctrl			= 0x00001035,
 	.sdram_tim1			= 0xCCCF36B3,
 	.sdram_tim2			= 0x308F7FDA,
@@ -131,6 +132,7 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
 const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
 	.sdram_config_init              = 0x61851B32,
 	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x0,
 	.ref_ctrl                       = 0x00001035,
 	.sdram_tim1                     = 0xCCCF36B3,
 	.sdram_tim2                     = 0x308F7FDA,
@@ -151,6 +153,54 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
 	.emif_rd_wr_exec_thresh         = 0x40000305
 };
 
+const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
+	.sdram_config_init              = 0x61851ab2,
+	.sdram_config                   = 0x61851ab2,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0E20400A,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_3        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009E009E,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009E009E,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
+const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
+	.sdram_config_init              = 0x61851B32,
+	.sdram_config                   = 0x61851B32,
+	.sdram_config2			= 0x08000000,
+	.ref_ctrl                       = 0x00001035,
+	.sdram_tim1                     = 0xCCCF36B3,
+	.sdram_tim2                     = 0x308F7FDA,
+	.sdram_tim3                     = 0x027F88A8,
+	.read_idle_ctrl                 = 0x00050000,
+	.zq_config                      = 0x0007190B,
+	.temp_alert_config              = 0x00000000,
+	.emif_ddr_phy_ctlr_1_init       = 0x0020400A,
+	.emif_ddr_phy_ctlr_1            = 0x0E24400A,
+	.emif_ddr_ext_phy_ctrl_1        = 0x04040100,
+	.emif_ddr_ext_phy_ctrl_2        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_3        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_4        = 0x009D009D,
+	.emif_ddr_ext_phy_ctrl_5        = 0x009D009D,
+	.emif_rd_wr_lvl_rmp_win         = 0x00000000,
+	.emif_rd_wr_lvl_rmp_ctl         = 0x80000000,
+	.emif_rd_wr_lvl_ctl             = 0x00000000,
+	.emif_rd_wr_exec_thresh         = 0x00000305
+};
+
 const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
@@ -159,11 +209,39 @@ const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
 	.is_ma_present	= 0x1
 };
 
-const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+/*
+ * DRA752 EVM board has 1.5 GB of memory
+ * EMIF1 --> 2Gb * 2 =  512MB
+ * EMIF2 --> 2Gb * 4 =  1GB
+ * so mapping 1GB interleaved and 512MB non-interleaved
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x80640300,
+	.dmm_lisa_map_2 = 0xC0500220,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+/*
+ * DRA752 EVM EMIF1 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
 	.dmm_lisa_map_0 = 0x0,
 	.dmm_lisa_map_1 = 0x0,
-	.dmm_lisa_map_2 = 0x0,
-	.dmm_lisa_map_3 = 0x80500100,
+	.dmm_lisa_map_2 = 0x80500100,
+	.dmm_lisa_map_3 = 0xFF020100,
+	.is_ma_present	= 0x1
+};
+
+/*
+ * DRA752 EVM EMIF2 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+	.dmm_lisa_map_0 = 0x0,
+	.dmm_lisa_map_1 = 0x0,
+	.dmm_lisa_map_2 = 0x80600200,
+	.dmm_lisa_map_3 = 0xFF020100,
 	.is_ma_present	= 0x1
 };
 
@@ -180,9 +258,20 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
 		*regs = &emif_regs_532_mhz_2cs_es2;
 		break;
 	case OMAP5432_ES2_0:
+		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+		break;
 	case DRA752_ES1_0:
+		switch (emif_nr) {
+		case 1:
+			*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
+			break;
+		case 2:
+			*regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1;
+			break;
+		}
+		break;
 	default:
-		*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+		*regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
 	}
 }
 
@@ -201,7 +290,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
 		break;
 	case DRA752_ES1_0:
 	default:
-		*dmm_lisa_regs = &lisa_map_512M_x_1;
+		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
 	}
 
 }
@@ -252,7 +341,8 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000077
+	0x00000077,
+	0x0
 };
 
 const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -274,7 +364,8 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000057
+	0x00000057,
+	0x0
 };
 
 const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -296,7 +387,56 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000057
+	0x00000057,
+	0x0
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x009E009E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x002E002E,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x004D004D,
+	0x0,
+	0x600020,
+	0x40010080,
+	0x8102040
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+	0x009D009D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x002D002D,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x00570057,
+	0x0,
+	0x600020,
+	0x40010080,
+	0x8102040
 };
 
 const struct lpddr2_mr_regs mr_regs = {
@@ -307,7 +447,7 @@ const struct lpddr2_mr_regs mr_regs = {
 	.mr16	= MR16_REF_FULL_ARRAY
 };
 
-static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
 {
 	switch (omap_revision()) {
 	case OMAP5430_ES1_0:
@@ -318,7 +458,14 @@ static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
 		*regs = ddr3_ext_phy_ctrl_const_base_es1;
 		break;
 	case OMAP5432_ES2_0:
+		*regs = ddr3_ext_phy_ctrl_const_base_es2;
+		break;
 	case DRA752_ES1_0:
+		if (emif_nr == 1)
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
+		else
+			*regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+		break;
 	default:
 		*regs = ddr3_ext_phy_ctrl_const_base_es2;
 
@@ -334,9 +481,12 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 {
 	u32 *ext_phy_ctrl_base = 0;
 	u32 *emif_ext_phy_ctrl_base = 0;
+	u32 emif_nr;
 	const u32 *ext_phy_ctrl_const_regs;
 	u32 i = 0;
 
+	emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
 	struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
 
 	ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
@@ -353,7 +503,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs)
 	 * external phy 6-24 registers do not change with
 	 * ddr frequency
 	 */
-	emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
+	emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
 	for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
 		writel(ext_phy_ctrl_const_regs[i],
 		       emif_ext_phy_ctrl_base++);
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
index a851f1f50f..beaf0d601a 100644
--- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
@@ -22,8 +22,14 @@
 #define __ASM_ARCH_PINMUX_DEFS_H
 
 #include <asm/arch/davinci_misc.h>
+#include <config.h>
 
-/* SPI pin muxer settings */
+/* SPI0 pin muxer settings */
+extern const struct pinmux_config spi0_pins_base[3];
+extern const struct pinmux_config spi0_pins_scs0[1];
+extern const struct pinmux_config spi0_pins_ena[1];
+
+/* SPI1 pin muxer settings */
 extern const struct pinmux_config spi1_pins_base[3];
 extern const struct pinmux_config spi1_pins_scs0[1];
 
@@ -35,6 +41,7 @@ extern const struct pinmux_config uart2_pins_rtscts[2];
 
 /* EMAC pin muxer settings*/
 extern const struct pinmux_config emac_pins_rmii[7];
+extern const struct pinmux_config emac_pins_rmii_clk_source[1];
 extern const struct pinmux_config emac_pins_mii[15];
 extern const struct pinmux_config emac_pins_mdio[2];
 
@@ -43,13 +50,19 @@ extern const struct pinmux_config i2c0_pins[2];
 extern const struct pinmux_config i2c1_pins[2];
 
 /* EMIFA pin muxer settings */
+extern const struct pinmux_config emifa_pins[40];
+extern const struct pinmux_config emifa_pins_cs0[1];
 extern const struct pinmux_config emifa_pins_cs2[1];
 extern const struct pinmux_config emifa_pins_cs3[1];
 extern const struct pinmux_config emifa_pins_cs4[1];
 extern const struct pinmux_config emifa_pins_nand[12];
 extern const struct pinmux_config emifa_pins_nor[43];
 
+/* USB pin mux setting */
+extern const struct pinmux_config usb_pins[1];
+
 /* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins_8bit[10];
 extern const struct pinmux_config mmc0_pins[6];
 
 #endif
diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h
deleted file mode 100644
index 8522335bfc..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/bits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software;  you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0  (1<<0)
-#define BIT1  (1<<1)
-#define BIT2  (1<<2)
-#define BIT3  (1<<3)
-#define BIT4  (1<<4)
-#define BIT5  (1<<5)
-#define BIT6  (1<<6)
-#define BIT7  (1<<7)
-#define BIT8  (1<<8)
-#define BIT9  (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h
deleted file mode 100644
index 2e92569a9c..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/clocks.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_CLOCKS_H_
-#define _OMAP24XX_CLOCKS_H_
-
-#define COMMIT_DIVIDERS  0x1
-
-#define MODE_BYPASS_FAST 0x2
-#define APLL_LOCK        0xc
-#ifdef CONFIG_APTIX
-#define DPLL_LOCK        0x1   /* stay in bypass mode */
-#else
-#define DPLL_LOCK        0x3   /* DPLL lock */
-#endif
-
-/****************************************************************************;
-; PRCM Scheme II
-;
-; Enable clocks and DPLL for:
-;  DPLL=300,	DPLLout=600	M=1,N=50   CM_CLKSEL1_PLL[21:8]  12/2*50
-;  Core=600	(core domain)   DPLLx2     CM_CLKSEL2_PLL[1:0]
-;  MPUF=300	(mpu domain)    2          CM_CLKSEL_MPU[4:0]
-;  DSPF=200    (dsp domain)    3          CM_CLKSEL_DSP[4:0]
-;  DSPI=100                    6          CM_CLKSEL_DSP[6:5]
-;  DSP_S          bypass	               CM_CLKSEL_DSP[7]
-;  IVAF=200    (dsp domain)    3          CM_CLKSEL_DSP[12:8]
-;  IVAF=100        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S          bypass                  CM_CLKSEL_DSP[13]
-;  GFXF=50      (gfx domain)	12         CM_CLKSEL_FGX[2:0]
-;  SSI_SSRF=200                 3         CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=100     auto
-;  L3=100Mhz (sdram)            6         CM_CLKSEL1_CORE[4:0]
-;  L4=100Mhz                    6
-;  C_L4_USB=50                 12         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define II_DPLL_OUT_X2   0x2    /* x2 core out */
-#define II_MPU_DIV       0x2    /* mpu = core/2 */
-#define II_DSP_DIV       0x343  /* dsp & iva divider */
-#define II_GFX_DIV       0x2
-#define II_BUS_DIV       0x04601026
-#define II_DPLL_300      0x01832100
-
-/****************************************************************************;
-; PRCM Scheme III
-;
-; Enable clocks and DPLL for:
-;  DPLL=266,	DPLLout=532	M=5+1,N=133 CM_CLKSEL1_PLL[21:8]  12/6*133=266
-;  Core=532	(core domain)   DPLLx2      CM_CLKSEL2_PLL[1:0]
-;  MPUF=266	(mpu domain)    /2          CM_CLKSEL_MPU[4:0]
-;  DSPF=177.3     (dsp domain)  /3          CM_CLKSEL_DSP[4:0]
-;  DSPI=88.67                   /6          CM_CLKSEL_DSP[6:5]
-;  DSP_S         ACTIVATED	            CM_CLKSEL_DSP[7]
-;  IVAF=88.67    (dsp domain)   /3          CM_CLKSEL_DSP[12:8]
-;  IVAF=88.67        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S         ACTIVATED                  CM_CLKSEL_DSP[13]
-;  GFXF=66.5      (gfx domain)	/8          CM_CLKSEL_FGX[2:0]:
-;  SSI_SSRF=177.3               /3          CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=88.67     auto
-;  L3=133Mhz (sdram)            /4          CM_CLKSEL1_CORE[4:0]
-;  L4=66.5Mhz                   /8
-;  C_L4_USB=33.25               /16         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define III_DPLL_OUT_X2   0x2    /* x2 core out */
-#define III_MPU_DIV       0x2    /* mpu = core/2 */
-#define III_DSP_DIV       0x23C3 /* dsp & iva divider sych enabled*/
-#define III_GFX_DIV       0x2
-#define III_BUS_DIV       0x08301044
-#define III_DPLL_266      0x01885500
-
-/* set defaults for boot up */
-#ifdef PRCM_CONFIG_II
-# define DPLL_OUT         II_DPLL_OUT_X2
-# define MPU_DIV          II_MPU_DIV
-# define DSP_DIV          II_DSP_DIV
-# define GFX_DIV          II_GFX_DIV
-# define BUS_DIV          II_BUS_DIV
-# define DPLL_VAL         II_DPLL_300
-#elif PRCM_CONFIG_III
-# define DPLL_OUT         III_DPLL_OUT_X2
-# define MPU_DIV          III_MPU_DIV
-# define DSP_DIV          III_DSP_DIV
-# define GFX_DIV          III_GFX_DIV
-# define BUS_DIV          III_BUS_DIV
-# define DPLL_VAL         III_DPLL_266
-#endif
-
-/* lock delay time out */
-#define LDELAY           12000000
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
deleted file mode 100644
index 6f645192a7..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
-
-#define I2C_BASE1		0x48070000
-#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
-
-#define I2C_DEFAULT_BASE	I2C_BASE1
-
-struct i2c {
-	unsigned short rev;	/* 0x00 */
-	unsigned short res1;
-	unsigned short ie;	/* 0x04 */
-	unsigned short res2;
-	unsigned short stat;	/* 0x08 */
-	unsigned short res3;
-	unsigned short iv;	/* 0x0C */
-	unsigned short res4;
-	unsigned short syss;	/* 0x10 */
-	unsigned short res4p1;
-	unsigned short buf;	/* 0x14 */
-	unsigned short res5;
-	unsigned short cnt;	/* 0x18 */
-	unsigned short res6;
-	unsigned short data;	/* 0x1C */
-	unsigned short res7;
-	unsigned short sysc;	/* 0x20 */
-	unsigned short res8;
-	unsigned short con;	/* 0x24 */
-	unsigned short res9;
-	unsigned short oa;	/* 0x28 */
-	unsigned short res10;
-	unsigned short sa;	/* 0x2C */
-	unsigned short res11;
-	unsigned short psc;	/* 0x30 */
-	unsigned short res12;
-	unsigned short scll;	/* 0x34 */
-	unsigned short res13;
-	unsigned short sclh;	/* 0x38 */
-	unsigned short res14;
-	unsigned short systest;	/* 0x3c */
-	unsigned short res15;
-};
-
-#define I2C_BUS_MAX	2
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h
deleted file mode 100644
index 42e8ab2bce..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/mem.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_MEM_H_
-#define _OMAP24XX_MEM_H_
-
-#define SDRC_CS0_OSET	 0x0
-#define SDRC_CS1_OSET	 0x30  /* mirror CS1 regs appear offset 0x30 from CS0 */
-
-#ifndef __ASSEMBLY__
-/* struct's for holding data tables for current boards, they are getting used
-   early in init when NO global access are there */
-struct sdrc_data_s {
-	u32    sdrc_sharing;
-	u32    sdrc_mdcfg_0_ddr;
-	u32    sdrc_mdcfg_0_sdr;
-	u32    sdrc_actim_ctrla_0;
-	u32    sdrc_actim_ctrlb_0;
-	u32    sdrc_rfr_ctrl;
-	u32    sdrc_mr_0_ddr;
-	u32    sdrc_mr_0_sdr;
-	u32    sdrc_dllab_ctrl;
-} /*__attribute__ ((packed))*/;
-typedef struct sdrc_data_s sdrc_data_t;
-
-typedef enum {
-	STACKED		= 0,
-	IP_DDR		= 1,
-	COMBO_DDR	= 2,
-	IP_SDR		= 3,
-} mem_t;
-
-#endif
-
-/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING		0x00000100
-#define H4_2420_SDRC_MDCFG_0_SDR	0x00D04010 /* discrete sdr module */
-#define H4_2420_SDRC_MR_0_SDR		0x00000031
-#define H4_2420_SDRC_MDCFG_0_DDR	0x01702011 /* descrite ddr module */
-#define H4_2420_COMBO_MDCFG_0_DDR	0x00801011 /* combo module */
-#define H4_2420_SDRC_MR_0_DDR		0x00000032
-
-#define H4_2422_SDRC_SHARING		0x00004b00
-#define H4_2422_SDRC_MDCFG_0_DDR	0x00801011 /* stacked ddr on 2422 */
-#define H4_2422_SDRC_MR_0_DDR		0x00000032
-
-/* ES1 work around timings */
-#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1	0x9bead909  /* 165Mhz for use with 100/133 */
-#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1	0x00000020
-#define H4_242x_SDRC_RFR_CTRL_ES1	    0x00002401	/* use over refresh for ES1 */
-
-/* optimized timings good for current shipping parts */
-#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz  0x5A59B485
-#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz  0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz  0x8BA6E6C8 /* temp warn 0 settings */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz  0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz	   0x0002da01
-#define H4_242X_SDRC_RFR_CTRL_133MHz	   0x0003de01
-#define H4_242x_SDRC_DLLAB_CTRL_100MHz	   0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
-#define H4_242x_SDRC_DLLAB_CTRL_133MHz	   0x0000690E /* 72deg, for ES2 */
-
-#ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_133MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_II	     /* L3 at 100MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* else NOR */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x000f0f01
-#  define H4_24XX_GPMC_CONFIG3_0   0x00050502
-#  define H4_24XX_GPMC_CONFIG4_0   0x0C060C06
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001F1F00
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080802
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x031A1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000003C2
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III	/* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* NOR boot */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x00151501
-#  define H4_24XX_GPMC_CONFIG3_0   0x00060602
-#  define H4_24XX_GPMC_CONFIG4_0   0x10081008
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-#  define H4_24XX_GPMC_CONFIG6_0   0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001f1f01
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080803
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x041f1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000004C4
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h
deleted file mode 100644
index 4fdb9c635f..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/mux.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP2420_MUX_H_
-#define _OMAP2420_MUX_H_
-
-#ifndef __ASSEMBLY__
-typedef  unsigned char uint8;
-typedef  unsigned int uint32;
-
-void muxSetupSDRC(void);
-void muxSetupGPMC(void);
-void muxSetupUsb0(void);
-void muxSetupUsbHost(void);
-void muxSetupUart3(void);
-void muxSetupI2C1(void);
-void muxSetupUART1(void);
-void muxSetupLCD(void);
-void muxSetupCamera(void);
-void muxSetupMMCSD(void) ;
-void muxSetupTouchScreen(void) ;
-void muxSetupHDQ(void);
-#endif
-
-#define USB_OTG_CTRL			        ((volatile uint32 *)0x4805E30C)
-
-/* Pin Muxing registers used for HDQ (Smart battery) */
-#define CONTROL_PADCONF_HDQ_SIO         ((volatile unsigned char *)0x48000115)
-
-/* Pin Muxing registers used for GPMC */
-#define CONTROL_PADCONF_GPMC_D2_BYTE0	((volatile unsigned char *)0x48000088)
-#define CONTROL_PADCONF_GPMC_D2_BYTE1	((volatile unsigned char *)0x48000089)
-#define CONTROL_PADCONF_GPMC_D2_BYTE2	((volatile unsigned char *)0x4800008A)
-#define CONTROL_PADCONF_GPMC_D2_BYTE3	((volatile unsigned char *)0x4800008B)
-
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE0	((volatile unsigned char *)0x4800008C)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE1	((volatile unsigned char *)0x4800008D)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE2	((volatile unsigned char *)0x4800008E)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE3	((volatile unsigned char *)0x4800008F)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE4	(0x48000090)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE5	(0x48000091)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE6	(0x48000092)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE7	(0x48000093)
-
-/* Pin Muxing registers used for SDRC */
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
-
-#define CONTROL_PADCONF_SDRC_A14_BYTE0	((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A14_BYTE1	((volatile unsigned char *)0x48000031)
-#define CONTROL_PADCONF_SDRC_A14_BYTE2	((volatile unsigned char *)0x48000032)
-#define CONTROL_PADCONF_SDRC_A14_BYTE3	((volatile unsigned char *)0x48000033)
-
-/* Pin Muxing registers used for Touch Screen (SPI) */
-#define CONTROL_PADCONF_SPI1_CLK        ((volatile unsigned char *)0x480000FF)
-#define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
-#define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
-#define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
-
-#define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
-
-/* Pin Muxing registers used for MMCSD */
-#define CONTROL_PADCONF_MMC_CLKI        ((volatile unsigned char *)0x480000FE)
-#define CONTROL_PADCONF_MMC_CLKO        ((volatile unsigned char *)0x480000F3)
-#define CONTROL_PADCONF_MMC_CMD         ((volatile unsigned char *)0x480000F4)
-#define CONTROL_PADCONF_MMC_DAT0        ((volatile unsigned char *)0x480000F5)
-#define CONTROL_PADCONF_MMC_DAT1        ((volatile unsigned char *)0x480000F6)
-#define CONTROL_PADCONF_MMC_DAT2        ((volatile unsigned char *)0x480000F7)
-#define CONTROL_PADCONF_MMC_DAT3        ((volatile unsigned char *)0x480000F8)
-#define CONTROL_PADCONF_MMC_DAT_DIR0    ((volatile unsigned char *)0x480000F9)
-#define CONTROL_PADCONF_MMC_DAT_DIR1    ((volatile unsigned char *)0x480000FA)
-#define CONTROL_PADCONF_MMC_DAT_DIR2    ((volatile unsigned char *)0x480000FB)
-#define CONTROL_PADCONF_MMC_DAT_DIR3    ((volatile unsigned char *)0x480000FC)
-#define CONTROL_PADCONF_MMC_CMD_DIR     ((volatile unsigned char *)0x480000FD)
-
-#define CONTROL_PADCONF_SDRC_A14        ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A13        ((volatile unsigned char *)0x48000031)
-
-/* Pin Muxing registers used for CAMERA */
-#define CONTROL_PADCONF_SYS_NRESWARM    ((volatile unsigned char *)0x4800012B)
-
-#define CONTROL_PADCONF_CAM_XCLK        ((volatile unsigned char *)0x480000DC)
-#define CONTROL_PADCONF_CAM_LCLK        ((volatile unsigned char *)0x480000DB)
-#define CONTROL_PADCONF_CAM_VS          ((volatile unsigned char *)0x480000DA)
-#define CONTROL_PADCONF_CAM_HS          ((volatile unsigned char *)0x480000D9)
-#define CONTROL_PADCONF_CAM_D0          ((volatile unsigned char *)0x480000D8)
-#define CONTROL_PADCONF_CAM_D1          ((volatile unsigned char *)0x480000D7)
-#define CONTROL_PADCONF_CAM_D2          ((volatile unsigned char *)0x480000D6)
-#define CONTROL_PADCONF_CAM_D3          ((volatile unsigned char *)0x480000D5)
-#define CONTROL_PADCONF_CAM_D4          ((volatile unsigned char *)0x480000D4)
-#define CONTROL_PADCONF_CAM_D5          ((volatile unsigned char *)0x480000D3)
-#define CONTROL_PADCONF_CAM_D6          ((volatile unsigned char *)0x480000D2)
-#define CONTROL_PADCONF_CAM_D7          ((volatile unsigned char *)0x480000D1)
-#define CONTROL_PADCONF_CAM_D8          ((volatile unsigned char *)0x480000D0)
-#define CONTROL_PADCONF_CAM_D9          ((volatile unsigned char *)0x480000CF)
-
-/* Pin Muxing registers used for LCD */
-#define CONTROL_PADCONF_DSS_D0          ((volatile unsigned char *)0x480000B3)
-#define CONTROL_PADCONF_DSS_D1          ((volatile unsigned char *)0x480000B4)
-#define CONTROL_PADCONF_DSS_D2          ((volatile unsigned char *)0x480000B5)
-#define CONTROL_PADCONF_DSS_D3          ((volatile unsigned char *)0x480000B6)
-#define CONTROL_PADCONF_DSS_D4          ((volatile unsigned char *)0x480000B7)
-#define CONTROL_PADCONF_DSS_D5          ((volatile unsigned char *)0x480000B8)
-#define CONTROL_PADCONF_DSS_D6          ((volatile unsigned char *)0x480000B9)
-#define CONTROL_PADCONF_DSS_D7          ((volatile unsigned char *)0x480000BA)
-#define CONTROL_PADCONF_DSS_D8          ((volatile unsigned char *)0x480000BB)
-#define CONTROL_PADCONF_DSS_D9          ((volatile unsigned char *)0x480000BC)
-#define CONTROL_PADCONF_DSS_D10         ((volatile unsigned char *)0x480000BD)
-#define CONTROL_PADCONF_DSS_D11         ((volatile unsigned char *)0x480000BE)
-#define CONTROL_PADCONF_DSS_D12         ((volatile unsigned char *)0x480000BF)
-#define CONTROL_PADCONF_DSS_D13         ((volatile unsigned char *)0x480000C0)
-#define CONTROL_PADCONF_DSS_D14         ((volatile unsigned char *)0x480000C1)
-#define CONTROL_PADCONF_DSS_D15         ((volatile unsigned char *)0x480000C2)
-#define CONTROL_PADCONF_DSS_D16         ((volatile unsigned char *)0x480000C3)
-#define CONTROL_PADCONF_DSS_D17         ((volatile unsigned char *)0x480000C4)
-#define CONTROL_PADCONF_DSS_PCLK        ((volatile unsigned char *)0x480000CB)
-#define CONTROL_PADCONF_DSS_VSYNC       ((volatile unsigned char *)0x480000CC)
-#define CONTROL_PADCONF_DSS_HSYNC       ((volatile unsigned char *)0x480000CD)
-#define CONTROL_PADCONF_DSS_ACBIAS      ((volatile unsigned char *)0x480000CE)
-
-/* Pin Muxing registers used for UART1 */
-#define CONTROL_PADCONF_UART1_CTS       ((volatile unsigned char *)0x480000C5)
-#define CONTROL_PADCONF_UART1_RTS       ((volatile unsigned char *)0x480000C6)
-#define CONTROL_PADCONF_UART1_TX        ((volatile unsigned char *)0x480000C7)
-#define CONTROL_PADCONF_UART1_RX        ((volatile unsigned char *)0x480000C8)
-
-/* Pin Muxing registers used for I2C1 */
-#define CONTROL_PADCONF_I2C1_SCL        ((volatile unsigned char *)0x48000111)
-#define CONTROL_PADCONF_I2C1_SDA        ((volatile unsigned char *)0x48000112)
-
-/* Pin Muxing registres used for USB0. */
-#define CONTROL_PADCONF_USB0_PUEN		((volatile uint8 *)0x4800011D)
-#define CONTROL_PADCONF_USB0_VP			((volatile uint8 *)0x4800011E)
-#define CONTROL_PADCONF_USB0_VM			((volatile uint8 *)0x4800011F)
-#define CONTROL_PADCONF_USB0_RCV		((volatile uint8 *)0x48000120)
-#define CONTROL_PADCONF_USB0_TXEN		((volatile uint8 *)0x48000121)
-#define CONTROL_PADCONF_USB0_SE0		((volatile uint8 *)0x48000122)
-#define CONTROL_PADCONF_USB0_DAT		((volatile uint8 *)0x48000123)
-
-/* Pin Muxing registres used for USB1. */
-#define CONTROL_PADCONF_USB1_RCV	(0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN	(0x480000EC)
-
-/* Pin Muxing registers used for UART3/IRDA */
-#define CONTROL_PADCONF_UART3_TX_IRTX	((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_UART3_RX_IRRX	((volatile uint8 *)0x48000119)
-
-/* Pin Muxing registers used for GPIO */
-#define CONTROL_PADCONF_GPIO69		(0x480000ED)
-#define CONTROL_PADCONF_GPIO70		(0x480000EE)
-#define CONTROL_PADCONF_GPIO102		(0x48000116)
-#define CONTROL_PADCONF_GPIO103		(0x48000117)
-#define CONTROL_PADCONF_GPIO104		(0x48000118)
-#define CONTROL_PADCONF_GPIO105		(0x48000119)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
deleted file mode 100644
index 5724f5d4ba..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/sizes.h>
-
-/*
- * 2420 specific Section
- */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-/* #define GP_DEVICE	(BIT8|BIT9)  FIXME -- commented out to make compile -- FIXME */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE    (0x48000000)
-#define CONTROL_STATUS        (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* device type */
-#define TST_DEVICE	0x0
-#define EMU_DEVICE	0x1
-#define HS_DEVICE	0x2
-#define GP_DEVICE	0x3
-
-/* TAP information */
-#define OMAP2420_TAP_BASE     (0x48014000)
-#define TAP_IDCODE_REG        (OMAP2420_TAP_BASE+0x204)
-#define PRODUCTION_ID         (OMAP2420_TAP_BASE+0x208)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE    (0x6800A000)
-#define GPMC_SYSCONFIG        (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_IRQENABLE        (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL  (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG           (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0        (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0        (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0        (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0        (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0        (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0        (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0	      (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1        (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1        (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1        (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1        (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1        (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1        (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1	      (OMAP2420_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_2        (OMAP2420_GPMC_BASE+0xC0)
-#define GPMC_CONFIG2_2        (OMAP2420_GPMC_BASE+0xC4)
-#define GPMC_CONFIG3_2        (OMAP2420_GPMC_BASE+0xC8)
-#define GPMC_CONFIG4_2        (OMAP2420_GPMC_BASE+0xCC)
-#define GPMC_CONFIG5_2        (OMAP2420_GPMC_BASE+0xD0)
-#define GPMC_CONFIG6_2        (OMAP2420_GPMC_BASE+0xD4)
-#define GPMC_CONFIG7_2        (OMAP2420_GPMC_BASE+0xD8)
-#define GPMC_CONFIG1_3        (OMAP2420_GPMC_BASE+0xF0)
-#define GPMC_CONFIG2_3        (OMAP2420_GPMC_BASE+0xF4)
-#define GPMC_CONFIG3_3        (OMAP2420_GPMC_BASE+0xF8)
-#define GPMC_CONFIG4_3        (OMAP2420_GPMC_BASE+0xFC)
-#define GPMC_CONFIG5_3        (OMAP2420_GPMC_BASE+0x100)
-#define GPMC_CONFIG6_3        (OMAP2420_GPMC_BASE+0x104)
-#define GPMC_CONFIG7_3	      (OMAP2420_GPMC_BASE+0x108)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG     (OMAP2420_SMS_BASE+0x10)
-#define SMS_CLASS_ARB0    (OMAP2420_SMS_BASE+0xD0)
-# define BURSTCOMPLETE_GROUP7    BIT31
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG     (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS        (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_CS_CFG        (OMAP2420_SDRC_BASE+0x40)
-#define SDRC_SHARING       (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL     (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLB_CTRL     (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER         (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0        (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0          (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL      (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0      (OMAP2420_SDRC_BASE+0xA8)
-#define OMAP2420_SDRC_CS0  0x80000000
-#define OMAP2420_SDRC_CS1  0xA0000000
-#define CMD_NOP            0x0
-#define CMD_PRECHARGE      0x1
-#define CMD_AUTOREFRESH    0x2
-#define CMD_ENTR_PWRDOWN   0x3
-#define CMD_EXIT_PWRDOWN   0x4
-#define CMD_ENTR_SRFRSH    0x5
-#define CMD_CKE_HIGH       0x6
-#define CMD_CKE_LOW        0x7
-#define SOFTRESET          BIT1
-#define SMART_IDLE         (0x2 << 3)
-#define REF_ON_IDLE        (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1	      0x4806A000
-#define OMAP2420_UART2	      0x4806C000
-#define OMAP2420_UART3        0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1         0x48028000
-#define OMAP2420_GPT2         0x4802A000
-#define OMAP2420_GPT3         0x48078000
-#define OMAP2420_GPT4         0x4807A000
-#define OMAP2420_GPT5         0x4807C000
-#define OMAP2420_GPT6         0x4807E000
-#define OMAP2420_GPT7         0x48080000
-#define OMAP2420_GPT8         0x48082000
-#define OMAP2420_GPT9         0x48084000
-#define OMAP2420_GPT10        0x48086000
-#define OMAP2420_GPT11        0x48088000
-#define OMAP2420_GPT12        0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR       0x0      /* r */
-#define TIOCP_CFG  0x10     /* rw */
-#define TISTAT     0x14     /* r */
-#define TISR       0x18     /* rw */
-#define TIER       0x1C     /* rw */
-#define TWER       0x20     /* rw */
-#define TCLR       0x24     /* rw */
-#define TCRR       0x28     /* rw */
-#define TLDR       0x2C     /* rw */
-#define TTGR       0x30     /* rw */
-#define TWPS       0x34     /* r */
-#define TMAR       0x38     /* rw */
-#define TCAR1      0x3c     /* r */
-#define TSICR      0x40     /* rw */
-#define TCAR2      0x44     /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE              0x48020000
-#define WD2_BASE              0x48022000
-#define WD3_BASE              0x48024000
-#define WD4_BASE              0x48026000
-#define WWPS       0x34     /* r */
-#define WSPR       0x48     /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU    (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE  (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE  (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE  (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE  (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE  (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP   (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE  (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX    (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP  (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL     (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN  (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL   (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL   (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP    (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- *  The 2420's chip selects are programmable.  The mask ROM
- *  does configure CS0 to 0x08000000 before dispatch.  So, if
- *  you want your code to live below that address, you have to
- *  be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A        /* Pre version B */
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0A000000  /* wifi board */
-#else
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0C000000  /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0          0x40000000
-#define SRAM_OFFSET1          0x00200000
-#define SRAM_OFFSET2          0x0000F800
-#define SRAM_VECT_CODE       (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG       (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER    (H4_CS1_BASE+0x1c)
-#endif  /* endif CONFIG_2420H4 */
-
-/* Common */
-#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
-
-#define PERIFERAL_PORT_BASE   0x480FE003
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h
deleted file mode 100644
index 53c231a5e4..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_info.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-typedef struct  h4_system_data {
-	/* base board info */
-	u32 base_b_rev;		/* rev from base board i2c */
-	/* cpu board info */
-	u32 cpu_b_rev;		/* rev from cpu board i2c */
-	u32 cpu_b_mux;		/* mux type on daughter board */
-	u32 cpu_b_ddr_type;	/* mem type */
-	u32 cpu_b_ddr_speed;	/* ddr speed rating */
-	u32 cpu_b_switches;	/* boot ctrl switch settings */
-	/* cpu info */
-	u32 cpu_type;		/* type of cpu; 2420, 2422, 2430,...*/
-	u32 cpu_rev;		/* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define XDR_POP           5      /* package on package part */
-#define SDR_DISCRETE      4      /* 128M memory SDR module*/
-#define DDR_STACKED       3      /* stacked part on 2422 */
-#define DDR_COMBO         2      /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE      1      /* 2x16 parts on daughter card */
-
-#define DDR_100           100    /* type found on most mem d-boards */
-#define DDR_111           111    /* some combo parts */
-#define DDR_133           133    /* most combo, some mem d-boards */
-#define DDR_165           165    /* future parts */
-
-#define CPU_2420          0x2420
-#define CPU_2422          0x2422 /* 2420 + 64M stacked */
-#define CPU_2423          0x2423 /* 2420 + 96M stacked */
-
-#define CPU_2422_ES1      1
-#define CPU_2422_ES2      2
-#define CPU_2420_ES1      1
-#define CPU_2420_ES2      2
-#define CPU_2420_2422_ES1 1
-
-#define CPU_2420_CHIPID   0x0B5D9000
-#define CPU_24XX_ID_MASK  0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP      2
-
-#define GPMC_MUXED        1
-#define GPMC_NONMUXED     0
-
-#define TYPE_NAND         0x800   /* bit pos for nand in gpmc reg */
-#define TYPE_NOR          0x000
-
-#define WIDTH_8BIT        0x0000
-#define WIDTH_16BIT       0x1000  /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72	/* i2c id for companion chip */
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h
deleted file mode 100644
index 9d8e5b2622..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_SYS_PROTO_H_
-#define _OMAP24XX_SYS_PROTO_H_
-
-void prcm_init(void);
-void memif_init(void);
-void sdrc_init(void);
-void do_sdrc_init(u32,u32);
-void gpmc_init(void);
-
-void ether_init(void);
-void watchdog_init(void);
-void set_muxconf_regs(void);
-void peripheral_enable(void);
-
-u32 get_cpu_type(void);
-u32 get_cpu_rev(void);
-u32 get_mem_type(void);
-u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
-u32 is_gpmc_muxed(void);
-u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
-u32 get_board_type(void);
-void display_board_info(u32);
-void update_mux(u32,u32);
-u32 get_sdr_cs_size(u32 offset);
-
-u32 running_in_sdram(void);
-u32 running_in_sram(void);
-u32 running_in_flash(void);
-u32 running_from_internal_boot(void);
-u32 get_device_type(void);
-#endif
diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h
index bed0002ec0..bed0002ec0 100644
--- a/arch/arm/include/asm/arch-omap3/clocks.h
+++ b/arch/arm/include/asm/arch-omap3/clock.h
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 2b5e9aeae1..c57599a938 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -253,4 +253,11 @@ struct gpio {
 
 #define OMAP3_EMU_HAL_START_HAL_CRITICAL	4
 
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		30
+#define OMAP_ABB_CLOCK_CYCLES		8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 26)
+
 #endif
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h
index ed7a1c8be7..d14d8fb8af 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clock.h
@@ -34,25 +34,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		0x4A004120
-#define CM_CLKMODE_DPLL_PER		0x4A008140
-#define CM_CLKMODE_DPLL_MPU		0x4A004160
-#define CM_CLKSEL_CORE			0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-#define CM_DIV_M2_DPLL		0x10
-#define CM_DIV_M3_DPLL		0x14
-#define CM_DIV_M4_DPLL		0x18
-#define CM_DIV_M5_DPLL		0x1C
-#define CM_DIV_M6_DPLL		0x20
-#define CM_DIV_M7_DPLL		0x24
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT	0
 #define CM_DLL_CTRL_OVERRIDE_MASK	(1 << 0)
@@ -94,10 +75,8 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
 
 /* CM_CLKSEL_CORE */
 #define CLKSEL_CORE_SHIFT	0
@@ -181,9 +160,7 @@
 #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 25)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -234,14 +211,13 @@
 
 #define ALTCLKSRC_MODE_ACTIVE		1
 
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
-
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
+/* Clock Defines */
+#define V_OSCK			38400000	/* Clock output from T2 */
+#define V_SCLK                   V_OSCK
+
 struct omap4_scrm_regs {
 	u32 revision;           /* 0x0000 */
 	u32 pad00[63];
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 3a0bfbf0c6..311c6ff522 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -115,18 +115,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index e9a6ffeb83..66afd92492 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -47,14 +47,6 @@
 #define DRAM_ADDR_SPACE_START	OMAP44XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP44XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP	(OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
 /* CONTROL_ID_CODE */
 #define CONTROL_ID_CODE		0x4A002204
 
@@ -79,15 +71,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP44XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP44XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP44XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
@@ -143,4 +129,12 @@ struct s32ktimer {
 #define NON_SECURE_SRAM_END	0x4030E000	/* Not inclusive */
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4030D000
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK	(0x1 << 7)
+
 #endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index ef85594bd2..e413466148 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,7 +22,7 @@
 #define _SYS_PROTO_H_
 
 #include <asm/arch/omap.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/io.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mux_omap4.h>
@@ -57,7 +57,8 @@ u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
 void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h
index 68afa76696..4d2765d878 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -35,19 +35,6 @@
  */
 #define LDELAY		1000000
 
-#define CM_CLKMODE_DPLL_CORE		(OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER		(OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU		(OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE			(OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL		0
-#define CM_IDLEST_DPLL		0x4
-#define CM_AUTOIDLE_DPLL	0x8
-#define CM_CLKSEL_DPLL		0xC
-
-#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
-
 /* CM_DLL_CTRL */
 #define CM_DLL_CTRL_OVERRIDE_SHIFT		0
 #define CM_DLL_CTRL_OVERRIDE_MASK		(1 << 0)
@@ -93,10 +80,8 @@
 #define CM_CLKSEL_DCC_EN_SHIFT			22
 #define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
 
-#define OMAP4_DPLL_MAX_N	127
-
 /* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK  7
 
 /* CM_CLKSEL_CORE */
 #define CLKSEL_CORE_SHIFT	0
@@ -113,6 +98,12 @@
 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
 
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT	0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK	1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1		0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2		1
+
 /* CM_BYPCLK_DPLL_IVA */
 #define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
 #define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
@@ -195,9 +186,7 @@
 #define RSTTIME1_MASK				(0x3ff << 0)
 
 /* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ	6
-#define OMAP_32K_CLK_FREQ		32768
 
 /* PRM_VC_VAL_BYPASS */
 #define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
@@ -229,9 +218,54 @@
 #define VDD_MPU_ES2_LOW 880
 #define VDD_MM_ES2_LOW 880
 
+/* TPS659038 Voltage settings in mv for OPP_NOMINAL */
+#define VDD_MPU_DRA752		1090
+#define VDD_EVE_DRA752		1060
+#define VDD_GPU_DRA752		1060
+#define VDD_CORE_DRA752		1030
+#define VDD_IVA_DRA752		1060
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE	0x4A002000
+#define DRA752_EFUSE_REGBITS	16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM	(DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD	(DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH	(DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM	(DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD	(DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH	(DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM	(DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM	(DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD	(DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH	(DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM	(DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD	(DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH	(DRA752_EFUSE_BASE + 0x1B28)
+
 /* Standard offset is 0.5v expressed in uv */
 #define PALMAS_SMPS_BASE_VOLT_UV 500000
 
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR		0x58
+#define TPS659038_REG_ADDR_SMPS12_MPU		0x23
+#define TPS659038_REG_ADDR_SMPS45_EVE		0x2B
+#define TPS659038_REG_ADDR_SMPS6_GPU		0x2F
+#define TPS659038_REG_ADDR_SMPS7_CORE		0x33
+#define TPS659038_REG_ADDR_SMPS8_IVA		0x37
+
 /* TPS */
 #define TPS62361_I2C_SLAVE_ADDR		0x60
 #define TPS62361_REG_ADDR_SET0		0x0
@@ -261,4 +295,25 @@
  * into microsec and passing the value.
  */
 #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC	31219
+
+#ifdef CONFIG_DRA7XX
+#define V_OSCK			20000000	/* Clock output from T2 */
+#else
+#define V_OSCK			19200000	/* Clock output from T2 */
+#endif
+
+#define V_SCLK	V_OSCK
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK		(1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT		1
+#define AUXCLK_SRCSELECT_MASK		(3 << 1)
+#define AUXCLK_CLKDIV_SHIFT		16
+#define AUXCLK_CLKDIV_MASK		(0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK	0
+#define AUXCLK_SRCSELECT_CORE_DPLL	1
+#define AUXCLK_SRCSELECT_PER_DPLL	2
+#define AUXCLK_SRCSELECT_ALTERNATE	3
+
 #endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 044ab5581a..4753f4624e 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -119,18 +119,6 @@ struct watchdog {
 #define WD_UNLOCK1		0xAAAA
 #define WD_UNLOCK2		0x5555
 
-#define SYSCLKDIV_1		(0x1 << 6)
-#define SYSCLKDIV_2		(0x1 << 7)
-
-#define CLKSEL_GPT1		(0x1 << 0)
-
-#define EN_GPT1			(0x1 << 0)
-#define EN_32KSYNC		(0x1 << 2)
-
-#define ST_WDT2			(0x1 << 5)
-
-#define RESETDONE		(0x1 << 0)
-
 #define TCLR_ST			(0x1 << 0)
 #define TCLR_AR			(0x1 << 1)
 #define TCLR_PRE		(0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
index 55e9de6041..5f2b0f9f5d 100644
--- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
+++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -28,11 +28,14 @@
 
 #include <asm/types.h>
 
+#define FSC	(1 << 19)
+#define SSC	(0 << 19)
+
 #define IEN	(1 << 18)
 #define IDIS	(0 << 18)
 
-#define PTU	(3 << 16)
-#define PTD	(1 << 16)
+#define PTU	(1 << 17)
+#define PTD	(0 << 17)
 #define PEN	(1 << 16)
 #define PDIS	(0 << 16)
 
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 4f43a903d8..817c1ff27f 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,16 +44,15 @@
 #define DRAM_ADDR_SPACE_START	OMAP54XX_DRAM_ADDR_SPACE_START
 #define DRAM_ADDR_SPACE_END	OMAP54XX_DRAM_ADDR_SPACE_END
 
-/* CONTROL */
-#define CTRL_BASE		(OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE	(CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP	(OMAP54XX_L4_WKUP_BASE + 0xc800)
-
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE	0x4A100638
-
-/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE		(CTRL_BASE + 0x204)
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE	0x4A002204
+#define CONTROL_WKUP_ID_CODE	0x4AE0C204
+
+#ifdef CONFIG_DRA7XX
+#define CONTROL_ID_CODE		CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE		CONTROL_CORE_ID_CODE
+#endif
 
 /* To be verified */
 #define OMAP5430_CONTROL_ID_CODE_ES1_0		0x0B94202F
@@ -62,11 +61,6 @@
 #define OMAP5432_CONTROL_ID_CODE_ES2_0          0x1B99802F
 #define DRA752_CONTROL_ID_CODE_ES1_0		0x0B99002F
 
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1		(CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT	16
-#define PROD_ID_1_SILICON_TYPE_MASK	(3 << 16)
-
 /* UART */
 #define UART1_BASE		(OMAP54XX_L4_PER_BASE + 0x6a000)
 #define UART2_BASE		(OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +74,9 @@
 /* Watchdog Timer2 - MPU watchdog */
 #define WDT2_BASE		(OMAP54XX_L4_WKUP_BASE + 0x14000)
 
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE	(OMAP54XX_L4_WKUP_BASE + 0x4000)
-
 /* GPMC */
 #define OMAP54XX_GPMC_BASE	0x50000000
 
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE	0x4A002000
-
 /*
  * Hardware Register Details
  */
@@ -118,9 +106,9 @@
 /* CONTROL_EFUSE_2 */
 #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1		0x00ffc000
 
+#define SDCARD_BIAS_PWRDNZ				(1 << 27)
 #define SDCARD_PWRDNZ					(1 << 26)
 #define SDCARD_BIAS_HIZ_MODE				(1 << 25)
-#define SDCARD_BIAS_PWRDNZ				(1 << 22)
 #define SDCARD_PBIASLITE_VMODE				(1 << 21)
 
 #ifndef __ASSEMBLY__
@@ -181,26 +169,17 @@ struct s32ktimer {
 #define EFUSE_4 0x45145100
 #endif /* __ASSEMBLY__ */
 
-/*
- * Non-secure SRAM Addresses
- * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
- * at 0x40304000(EMU base) so that our code works for both EMU and GP
- */
+#ifdef CONFIG_DRA7XX
+#define NON_SECURE_SRAM_START	0x40300000
+#define NON_SECURE_SRAM_END	0x40380000	/* Not inclusive */
+#else
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000	/* Not inclusive */
+#endif
+
 /* base address for indirect vectors (internal boot mode) */
 #define SRAM_ROM_VECT_BASE	0x4031F000
 
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
-#define OMAP4430_ES1_0	0x44300100
-#define OMAP4430_ES2_0	0x44300200
-#define OMAP4430_ES2_1	0x44300210
-#define OMAP4430_ES2_2	0x44300220
-#define OMAP4430_ES2_3	0x44300230
-#define OMAP4460_ES1_0	0x44600100
-#define OMAP4460_ES1_1	0x44600110
-
 /* CONTROL_SRCOMP_XXX_SIDE */
 #define OVERRIDE_XS_SHIFT		30
 #define OVERRIDE_XS_MASK		(1 << 30)
@@ -215,6 +194,19 @@ struct s32ktimer {
 #define SRCODE_OVERRIDE_SEL_XS_SHIFT	0
 #define SRCODE_OVERRIDE_SEL_XS_MASK	(1 << 0)
 
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME		50
+#define OMAP_ABB_CLOCK_CYCLES		16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK		(0x1 << 7)
+
+/* ABB efuse masks */
+#define OMAP5_ABB_FUSE_VSET_MASK		(0x1F << 24)
+#define OMAP5_ABB_FUSE_ENABLE_MASK		(0x1 << 29)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK	(0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK	(0x1f << 0)
+
 #ifndef __ASSEMBLY__
 struct srcomp_params {
 	s8 divide_factor;
@@ -229,6 +221,7 @@ struct ctrl_ioregs {
 	u32 ctrl_ddrio_1;
 	u32 ctrl_ddrio_2;
 	u32 ctrl_emif_sdram_config_ext;
+	u32 ctrl_ddr_ctrl_ext_0;
 };
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 4d99db9b7d..0bb59d869b 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -23,9 +23,9 @@
 
 #include <asm/arch/omap.h>
 #include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 #include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -61,7 +61,8 @@ u32 cortex_rev(void);
 void save_omap_boot_params(void);
 void init_omap_revision(void);
 void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
 u32 warm_reset(void);
 void force_emif_self_refresh(void);
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 5f11d7b72e..1b94a99c54 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -581,7 +581,7 @@
 	(0xFF << EMIF_SYS_ADDR_SHIFT))
 
 #define EMIF_EXT_PHY_CTRL_TIMING_REG	0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG	0x13
+#define EMIF_EXT_PHY_CTRL_CONST_REG	0x14
 
 /* Reg mapping structure */
 struct emif_reg_struct {
@@ -855,13 +855,10 @@ struct dmm_lisa_map_regs {
 #define DPD_ENABLE	1
 
 /* Maximum delay before Low Power Modes */
-#ifndef CONFIG_OMAP54XX
-#define REG_CS_TIM		0xF
-#else
 #define REG_CS_TIM		0x0
-#endif
-#define REG_SR_TIM		0xF
-#define REG_PD_TIM		0xF
+#define REG_SR_TIM		0x0
+#define REG_PD_TIM		0x0
+
 
 /* EMIF_PWR_MGMT_CTRL register */
 #define EMIF_PWR_MGMT_CTRL (\
@@ -1113,6 +1110,7 @@ struct emif_regs {
 	u32 freq;
 	u32 sdram_config_init;
 	u32 sdram_config;
+	u32 sdram_config2;
 	u32 ref_ctrl;
 	u32 sdram_tim1;
 	u32 sdram_tim2;
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index ee7b188d3a..787e614ecb 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -29,7 +29,7 @@
 
 #include <common.h>
 
-#define NUM_SYS_CLKS	8
+#define NUM_SYS_CLKS	7
 
 struct prcm_regs {
 	/* cm1.ckgen */
@@ -242,6 +242,8 @@ struct prcm_regs {
 	u32 cm_l3init_fsusb_clkctrl;
 	u32 cm_l3init_ocp2scp1_clkctrl;
 
+	u32 prm_irqstatus_mpu_2;
+
 	/* cm2.l4per */
 	u32 cm_l4per_clkstctrl;
 	u32 cm_l4per_dynamicdep;
@@ -301,6 +303,7 @@ struct prcm_regs {
 	/* l4 wkup regs */
 	u32 cm_abe_pll_ref_clksel;
 	u32 cm_sys_clksel;
+	u32 cm_abe_pll_sys_clksel;
 	u32 cm_wkup_clkstctrl;
 	u32 cm_wkup_l4wkup_clkctrl;
 	u32 cm_wkup_wdtimer1_clkctrl;
@@ -328,6 +331,8 @@ struct prcm_regs {
 	u32 prm_sldo_mpu_ctrl;
 	u32 prm_sldo_mm_setup;
 	u32 prm_sldo_mm_ctrl;
+	u32 prm_abbldo_mpu_setup;
+	u32 prm_abbldo_mpu_ctrl;
 
 	u32 cm_div_m4_dpll_core;
 	u32 cm_div_m5_dpll_core;
@@ -346,10 +351,15 @@ struct prcm_regs {
 	u32 cm_l3init_usbphy_clkctrl;
 	u32 cm_l4per_mcbsp4_clkctrl;
 	u32 prm_vc_cfg_channel;
+
+	/* SCRM stuff, used by some boards */
+	u32 scrm_auxclk0;
+	u32 scrm_auxclk1;
 };
 
 struct omap_sys_ctrl_regs {
 	u32 control_status;
+	u32 control_std_fuse_opp_vdd_mpu_2;
 	u32 control_core_mmr_lock1;
 	u32 control_core_mmr_lock2;
 	u32 control_core_mmr_lock3;
@@ -362,6 +372,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ldosram_iva_voltage_ctrl;
 	u32 control_ldosram_mpu_voltage_ctrl;
 	u32 control_ldosram_core_voltage_ctrl;
+	u32 control_usbotghs_ctrl;
 	u32 control_padconf_core_base;
 	u32 control_paconf_global;
 	u32 control_paconf_mode;
@@ -394,6 +405,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_ddrio_0;
 	u32 control_ddrio_1;
 	u32 control_ddrio_2;
+	u32 control_ddr_control_ext_0;
 	u32 control_lpddr2io1_0;
 	u32 control_lpddr2io1_1;
 	u32 control_lpddr2io1_2;
@@ -419,6 +431,7 @@ struct omap_sys_ctrl_regs {
 	u32 control_port_emif2_sdram_config;
 	u32 control_emif1_sdram_config_ext;
 	u32 control_emif2_sdram_config_ext;
+	u32 control_wkup_ldovbb_mpu_voltage_ctrl;
 	u32 control_smart1nopmio_padconf_0;
 	u32 control_smart1nopmio_padconf_1;
 	u32 control_padconf_mode;
@@ -494,11 +507,25 @@ struct pmic_data {
 	u32 start_code;
 	unsigned gpio;
 	int gpio_en;
+	u32 i2c_slave_addr;
+	void (*pmic_bus_init)(void);
+	int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
+};
+
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg:	register address for efuse
+ * @reg_bits:	Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+	u32 reg;
+	u8 reg_bits;
 };
 
 struct volts {
 	u32 value;
 	u32 addr;
+	struct volts_efuse_data efuse;
 	struct pmic_data *pmic;
 };
 
@@ -506,6 +533,9 @@ struct vcores_data {
 	struct volts mpu;
 	struct volts core;
 	struct volts mm;
+	struct volts gpu;
+	struct volts eve;
+	struct volts iva;
 };
 
 extern struct prcm_regs const **prcm;
@@ -545,9 +575,9 @@ void enable_non_essential_clocks(void);
 void scale_vcores(struct vcores_data const *);
 u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
-
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N	127
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+	       u32 txdone, u32 txdone_mask, u32 opp);
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
 
 /* HW Init Context */
 #define OMAP_INIT_CONTEXT_SPL			0
@@ -555,11 +585,32 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL	2
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH	3
 
+/* ABB */
+#define OMAP_ABB_NOMINAL_OPP		0
+#define OMAP_ABB_FAST_OPP		1
+#define OMAP_ABB_SLOW_OPP		3
+#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK		(0x1 << 0)
+#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK		(0x1 << 2)
+#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK		(0x1 << 6)
+#define OMAP_ABB_SETUP_SR2EN_MASK			(0x1 << 0)
+#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK		(0x1 << 2)
+#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK		(0x1 << 1)
+#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK		(0xff << 8)
+
 static inline u32 omap_revision(void)
 {
 	extern u32 *const omap_si_rev;
 	return *omap_si_rev;
 }
+
+#define OMAP54xx	0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+	extern u32 *const omap_si_rev;
+	return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
 #endif
 
 /*
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index b545fb79bc..8b1c8ed4bf 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -27,7 +27,7 @@
 
 void  __flush_cache(unsigned long start, unsigned long size)
 {
-#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
+#if defined(CONFIG_ARM1136)
 	void arm1136_cache_flush(void);
 
 	arm1136_cache_flush();