Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>

16 files changed, 58 insertions, 55 deletions

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 1d4637d506..07d0c859cb 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -28,6 +28,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 .globl _start
@@ -380,7 +381,7 @@ stack_setup:
 	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
 #else
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -510,7 +511,7 @@ cpu_init_crit:
 #else
 	adr	r2, _start
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 #endif
 	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc and cpsr (into parm regs)
 	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
@@ -547,7 +548,7 @@ cpu_init_crit:
 #else
 	adr	r13, _start			@ setup our mode stack (enter in banked mode)
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
 #endif
 
 	str	lr, [r13]			@ save caller lr in position 0 of saved stack
@@ -569,7 +570,7 @@ cpu_init_crit:
 #else
 	ldr	r0, _armboot_start		@ get data regions start
 	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
+	sub	r0, r0, #(GENERATED_GBL_DATA_SIZE+8)	@ move past gbl and a couple spots for abort stack
 #endif
 	str	lr, [r0]			@ save caller lr in position 0 of saved stack
 	mrs	r0, spsr			@ get the spsr
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 24e5bf4fff..c13ccebf89 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -30,6 +30,7 @@
  * Base codes by scsuh (sc.suh)
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #ifdef CONFIG_ENABLE_MMU
@@ -546,7 +547,7 @@ skip_hw_init:
 stack_setup:
 	ldr	r0, =CONFIG_SYS_UBOOT_BASE	/* base of copy in DRAM	    */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 	bic	sp, sp, #7		/* 8-byte alignment for ABI compliance */
 
@@ -663,7 +664,7 @@ phy_last_jump:
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
 	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -687,7 +688,7 @@ phy_last_jump:
 	/* move past malloc pool */
 	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
 	/* move to reserved a couple spots for abort stack */
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE + 8)
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
@@ -721,7 +722,7 @@ phy_last_jump:
 	/* move past malloc pool */
 	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)
 	/* move past gbl and a couple spots for abort stack */
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)
+	sub	r0, r0, #(GENERATED_GBL_DATA_SIZE + 8)
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index d93911f566..06aa3a25d4 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -23,7 +23,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/hardware.h>
@@ -327,7 +327,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -609,7 +609,7 @@ lock_loop:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -646,7 +646,7 @@ lock_loop:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 343a760df4..84f754677f 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -24,6 +24,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <common.h>
 #include <config.h>
 
@@ -414,7 +415,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area              */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                 */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                 */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -529,7 +530,7 @@ cpu_init_crit:
 	sub	r2, r2, #(CONFIG_STACKSIZE)
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
 	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -569,7 +570,7 @@ cpu_init_crit:
 	sub	r13, r13, #(CONFIG_STACKSIZE)
 	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
 	/* reserve a couple spots in abort stack */
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8)
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8)
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index cf18a01664..f45ad891bc 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -385,7 +385,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -492,7 +492,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -529,7 +529,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN
 #endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index e1c1508fb3..69e1a33174 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -31,7 +31,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <common.h>
 #include <version.h>
@@ -349,7 +349,7 @@ stack_setup:
 	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
 #ifndef CONFIG_PRELOADER
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -475,7 +475,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	adr	r2, _start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -513,7 +513,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	adr	r13, _start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 077886f36f..25b573bcdf 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -316,7 +316,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -427,7 +427,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -465,7 +465,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 07356cb5fd..3e9d5e8c93 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -30,7 +30,7 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -312,7 +312,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -403,7 +403,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -441,7 +441,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index ef6c32d137..b9eb0c9b58 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -29,6 +29,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
@@ -357,7 +358,7 @@ copy_loop:				@ copy 32 bytes at a time
 stack_setup:
 	ldr	r0, _TEXT_BASE		@ upper 128 KiB: relocated uboot
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN @ malloc area
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE @ bdinfo
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE @ bdinfo
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ)
 #endif
@@ -464,7 +465,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE + 8)	@ set base 2 words into abort
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE + 8)	@ set base 2 words into abort
 #else
 	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort
 						@ stack
@@ -507,7 +508,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack (enter
 	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE + 8) @ move to reserved a couple
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE + 8) @ move to reserved a couple
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter
 						@ in banked mode)
@@ -535,7 +536,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r0, _armboot_start		@ get data regions start
 	sub	r0, r0, #(CONFIG_SYS_MALLOC_LEN)	@ move past malloc pool
-	sub	r0, r0, #(CONFIG_SYS_GBL_DATA_SIZE + 8)	@ move past gbl and a couple
+	sub	r0, r0, #(GENERATED_GBL_DATA_SIZE + 8)	@ move past gbl and a couple
 #else
 	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
 						@ spots for abort stack
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 836c33ba8b..2931ccd616 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -27,6 +27,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/arch/ixp425.h>
@@ -555,7 +556,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -620,7 +621,7 @@ _start_armboot: .word start_armboot
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -661,7 +662,7 @@ _start_armboot: .word start_armboot
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index d944860fca..703baf89a2 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -24,11 +24,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  *************************************************************************
  *
@@ -349,7 +348,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -464,7 +463,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -501,7 +500,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 3c5bd84e36..b8065b70df 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -29,6 +29,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
@@ -419,7 +420,7 @@ reset:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -460,7 +461,7 @@ reset:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 20091b24c0..77f3735e54 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -27,11 +27,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  * Jump vector table
  */
@@ -331,7 +330,7 @@ vector_copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 8eabb66cab..5635e0a30f 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -25,11 +25,10 @@
  * MA 02111-1307 USA
  */
 
-
+#include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
 
-
 /*
  *************************************************************************
  *
@@ -301,7 +300,7 @@ copy_loop:
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
+	sub	r0, r0, #GENERATED_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -445,7 +444,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r2, _armboot_start
 	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	sub	r2, r2, #(GENERATED_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
 #else
 	ldr	r2, IRQ_STACK_START_IN
 #endif
@@ -482,7 +481,7 @@ cpu_init_crit:
 #if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
 	ldr	r13, _armboot_start		@ setup our mode stack
 	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(GENERATED_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 #else
 	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
 #endif
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 6dae4328e6..5438ebc5fb 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -30,7 +30,7 @@
  * global variables during system initialization (until we have set
  * up the memory controller so that we can use RAM).
  *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
  */
 
 typedef	struct	global_data {
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index 9a21e7b40a..90aa04b87f 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -50,7 +50,7 @@ int interrupt_init (void)
 	IRQ_STACK_START = gd->irq_sp - 4;
 	IRQ_STACK_START_IN = gd->irq_sp + 8;
 #else
-	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - GENERATED_GBL_DATA_SIZE - 4;
 #endif
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;