diff options
author | Marek Vasut <marek.vasut@gmail.com> | 2010-09-28 15:44:10 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2010-10-19 23:04:35 +0200 |
commit | 2cad92fd674d035a04631b9ab044c030f95e0fec (patch) | |
tree | c5bed46f66945b04516de625c28d9f9efa625481 /arch/arm | |
parent | 6ef6eb91cda895de3366068fc2caf25328786f4d (diff) |
PXA: Fix reloc, Push lowlevel init into C code
Firstly, this fixes relocation issues. I had to use part of Dcache as RAM for a
while. I also moved around the lowlevel init code. It turned out so most of the
lowlevel init code ended in cpu.c (and eventually was rewritten into C).
This will also allow easier operation with FDT, multi-CPU-model support etc. in
later releases.
NOTE: This breaks most of the PXA boards (actually, the reloc stuff did already,
this only finishes the doom).
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/cpu/pxa/cpu.c | 229 | ||||
-rw-r--r-- | arch/arm/cpu/pxa/start.S | 344 |
2 files changed, 359 insertions, 214 deletions
diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 330d013c6d..3ea34582e7 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -30,11 +30,11 @@ * CPU specific code */ -#include <asm/arch/pxa-regs.h> #include <asm/io.h> #include <asm/system.h> #include <command.h> #include <common.h> +#include <asm/arch/pxa-regs.h> static void cache_flush(void); @@ -91,3 +91,230 @@ void set_GPIO_mode(int gpio_mode) writel(val, GAFR(gpio)); } #endif /* CONFIG_CPU_MONAHANS */ + +void pxa_wait_ticks(int ticks) +{ + writel(0, OSCR); + while (readl(OSCR) < ticks) + asm volatile("":::"memory"); +} + +inline void writelrb(uint32_t val, uint32_t addr) +{ + writel(val, addr); + asm volatile("":::"memory"); + readl(addr); + asm volatile("":::"memory"); +} + +void pxa_dram_init(void) +{ + uint32_t tmp; + int i; + /* + * 1) Initialize Asynchronous static memory controller + */ + + writelrb(CONFIG_SYS_MSC0_VAL, MSC0); + writelrb(CONFIG_SYS_MSC1_VAL, MSC1); + writelrb(CONFIG_SYS_MSC2_VAL, MSC2); + /* + * 2) Initialize Card Interface + */ + + /* MECR: Memory Expansion Card Register */ + writelrb(CONFIG_SYS_MECR_VAL, MECR); + /* MCMEM0: Card Interface slot 0 timing */ + writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0); + /* MCMEM1: Card Interface slot 1 timing */ + writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1); + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0); + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1); + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0); + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1); + + /* + * 3) Configure Fly-By DMA register + */ + + writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG); + + /* + * 4) Initialize Timing for Sync Memory (SDCLK0) + */ + + /* + * Before accessing MDREFR we need a valid DRI field, so we set + * this to power on defaults + DRI field. + */ + + /* Read current MDREFR config and zero out DRI */ + tmp = readl(MDREFR) & ~0xfff; + /* Add user-specified DRI */ + tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff; + /* Configure important bits */ + tmp |= MDREFR_K0RUN | MDREFR_SLFRSH; + tmp &= ~(MDREFR_APD | MDREFR_E1PIN); + + /* Write MDREFR back */ + writelrb(tmp, MDREFR); + + /* + * 5) Initialize Synchronous Static Memory (Flash/Peripherals) + */ + + /* Initialize SXCNFG register. Assert the enable bits. + * + * Write SXMRS to cause an MRS command to all enabled banks of + * synchronous static memory. Note that SXLCR need not be written + * at this time. + */ + writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG); + + /* + * 6) Initialize SDRAM + */ + + writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR); + writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR); + + /* + * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure + * but not enable each SDRAM partition pair. + */ + + writelrb(CONFIG_SYS_MDCNFG_VAL & + ~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG); + /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ + pxa_wait_ticks(0x300); + + /* + * 8) Trigger a number (usually 8) refresh cycles by attempting + * non-burst read or write accesses to disabled SDRAM, as commonly + * specified in the power up sequence documented in SDRAM data + * sheets. The address(es) used for this purpose must not be + * cacheable. + */ + for (i = 9; i >= 0; i--) { + writel(i, 0xa0000000); + asm volatile("":::"memory"); + } + /* + * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). + */ + + tmp = CONFIG_SYS_MDCNFG_VAL & + (MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3); + tmp |= readl(MDCNFG); + writelrb(tmp, MDCNFG); + + /* + * 10) Write MDMRS. + */ + + writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS); + + /* + * 11) Enable APD + */ + + if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) { + tmp = readl(MDREFR); + tmp |= MDREFR_APD; + writelrb(tmp, MDREFR); + } +} + +void pxa_gpio_setup(void) +{ + writel(CONFIG_SYS_GPSR0_VAL, GPSR0); + writel(CONFIG_SYS_GPSR1_VAL, GPSR1); + writel(CONFIG_SYS_GPSR2_VAL, GPSR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPSR3_VAL, GPSR3); +#endif + + writel(CONFIG_SYS_GPCR0_VAL, GPCR0); + writel(CONFIG_SYS_GPCR1_VAL, GPCR1); + writel(CONFIG_SYS_GPCR2_VAL, GPCR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPCR3_VAL, GPCR3); +#endif + + writel(CONFIG_SYS_GPDR0_VAL, GPDR0); + writel(CONFIG_SYS_GPDR1_VAL, GPDR1); + writel(CONFIG_SYS_GPDR2_VAL, GPDR2); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GPDR3_VAL, GPDR3); +#endif + + writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L); + writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U); + writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L); + writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U); + writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L); + writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L); + writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U); +#endif + + writel(CONFIG_SYS_PSSR_VAL, PSSR); +} + +void pxa_interrupt_setup(void) +{ + writel(0, ICLR); + writel(0, ICMR); +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) + writel(0, ICLR2); + writel(0, ICMR2); +#endif +} + +void pxa_clock_setup(void) +{ +#ifndef CONFIG_CPU_MONAHANS + writel(CONFIG_SYS_CKEN, CKEN); + writel(CONFIG_SYS_CCCR, CCCR); + asm volatile("mcr p14, 0, %0, c6, c0, 0"::"r"(2)); +#else +/* Set CKENA/CKENB/ACCR for MH */ +#endif + + /* enable the 32Khz oscillator for RTC and PowerManager */ + writel(OSCC_OON, OSCC); + while(!(readl(OSCC) & OSCC_OOK)) + asm volatile("":::"memory"); +} + +void pxa_wakeup(void) +{ + uint32_t rcsr; + + rcsr = readl(RCSR); + writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR); + + /* Wakeup */ + if (rcsr & RCSR_SMR) { + writel(PSSR_PH, PSSR); + pxa_dram_init(); + icache_disable(); + dcache_disable(); + asm volatile("mov pc, %0"::"r"(readl(PSSR))); + } +} + +int arch_cpu_init(void) +{ + pxa_gpio_setup(); +// pxa_wait_ticks(0x8000); + pxa_wakeup(); + pxa_interrupt_setup(); + pxa_clock_setup(); + return 0; +} diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 9c5023bae4..684e44e838 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -31,6 +31,14 @@ #include <config.h> #include <version.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/macro.h> + +/* takes care the CP15 update has taken place */ +.macro CPWAIT reg +mrc p15,0,\reg,c2,c0,0 +mov \reg,\reg +sub pc,pc,#4 +.endm .globl _start _start: b reset @@ -86,11 +94,9 @@ _fiq: .word fiq _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC) .globl _armboot_start _armboot_start: .word _start -#endif /* * These are defined in the board-specific linker script. @@ -115,7 +121,7 @@ FIQ_STACK_START: .word 0x0badc0de #endif /* CONFIG_USE_IRQ */ -#if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) +#ifndef CONFIG_PRELOADER /* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN IRQ_STACK_START_IN: @@ -159,12 +165,84 @@ reset: msr cpsr,r0 /* - * we do sys-critical inits only at reboot, - * not when booting from ram! + * Enable MMU to use DCache as DRAM */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif + /* Domain access -- enable for all CPs */ + ldr r0, =0x0000ffff + mcr p15, 0, r0, c3, c0, 0 + + /* Point TTBR to MMU table */ + ldr r0, =mmu_table + adr r2, _start + orr r0, r2 + mcr p15, 0, r0, c2, c0, 0 + +/* !!! Hereby, check if the code is running from SRAM !!! */ +/* If the code is running from SRAM, alias SRAM to 0x0 to simulate NOR. The code + * is linked to 0x0 too, so this makes things easier. */ + cmp r2, #0x5c000000 + + ldreq r1, [r0] + orreq r1, r2 + streq r1, [r0] + + /* Kick in MMU, ICache, DCache, BTB */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, #0x1b00 + bic r0, #0x0087 + orr r0, #0x1800 + orr r0, #0x0005 + mcr p15, 0, r0, c1, c0, 0 + CPWAIT r0 + + /* Unlock Icache, Dcache */ + mcr p15, 0, r0, c9, c1, 1 + mcr p15, 0, r0, c9, c2, 1 + + /* Flush Icache, Dcache, BTB */ + mcr p15, 0, r0, c7, c7, 0 + + /* Unlock I-TLB, D-TLB */ + mcr p15, 0, r0, c10, c4, 1 + mcr p15, 0, r0, c10, c8, 1 + + /* Flush TLB */ + mcr p15, 0, r0, c8, c7, 0 + /* Allocate 4096 bytes of Dcache as RAM */ + + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + + mov r4, #0x00 + mov r5, #0x00 + mov r2, #0x01 + mcr p15, 0, r0, c9, c2, 0 + CPWAIT r0 + + /* 128 lines reserved (128 x 32bytes = 4096 bytes total) */ + mov r0, #128 + mov r1, #0xa0000000 +alloc: + mcr p15, 0, r1, c7, c2, 5 + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + strd r4, [r1], #8 + strd r4, [r1], #8 + strd r4, [r1], #8 + strd r4, [r1], #8 + subs r0, #0x01 + bne alloc + /* Drain pending loads and stores */ + mcr p15, 0, r0, c7, c10, 4 + mov r2, #0x00 + mcr p15, 0, r2, c9, c2, 0 + CPWAIT r0 + + /* Jump to 0x0 ( + offset) if running from SRAM */ + adr r0, zerojmp + bic r0, #0x5c000000 + mov pc, r0 +zerojmp: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: @@ -201,11 +279,13 @@ stack_setup: beq clear_bss #ifndef CONFIG_SKIP_RELOCATE_UBOOT + stmfd sp!, {r0-r12} copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ + stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop + ldmfd sp!, {r0-r12} #ifndef CONFIG_PRELOADER /* fix got entries */ @@ -274,218 +354,28 @@ _board_init_r: .word board_init_r /****************************************************************************/ /* */ -/* the actual reset code */ +/* the actual reset code for OneNAND IPL */ /* */ /****************************************************************************/ +#ifndef CONFIG_PXA27X +#error OneNAND IPL is not supported on PXA25x and 26x due to lack of SRAM +#endif + reset: - mrs r0,cpsr /* set the CPU to SVC32 mode */ - bic r0,r0,#0x1f /* (superviser mode, M=10011) */ + /* Set CPU to SVC32 mode */ + mrs r0,cpsr + bic r0,r0,#0x1f orr r0,r0,#0x13 msr cpsr,r0 - /* - * we do sys-critical inits only at reboot, - * not when booting from RAM! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit /* we do sys-critical inits */ -#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */ - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT -relocate: /* relocate U-Boot to RAM */ - adr r0, _start /* r0 <- current position of code */ - ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ -#ifndef CONFIG_PRELOADER - cmp r0, r1 /* don't reloc during debug */ - beq stack_setup -#endif - - ldr r2, _armboot_start - ldr r3, _bss_start - sub r2, r3, r2 /* r2 <- size of armboot */ - add r2, r0, r2 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop -#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */ + /* Point stack at the end of SRAM and leave 32 words for abort-stack */ + ldr sp, =0x5c03ff80 - /* Set up the stack */ -stack_setup: - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ -#ifdef CONFIG_PRELOADER - sub sp, r0, #128 /* leave 32 words for abort-stack */ -#else - sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ - sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ -#ifdef CONFIG_USE_IRQ - sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) -#endif /* CONFIG_USE_IRQ */ - sub sp, r0, #12 /* leave 3 words for abort-stack */ - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ -#endif + /* Start OneNAND IPL */ + ldr pc, =start_oneboot -clear_bss: - ldr r0, _bss_start /* find start of bss segment */ - ldr r1, _bss_end /* stop here */ - mov r2, #0x00000000 /* clear */ - -#ifndef CONFIG_PRELOADER -clbss_l:str r2, [r0] /* clear loop... */ - add r0, r0, #4 - cmp r0, r1 - blo clbss_l -#endif - - ldr pc, _start_armboot - -#ifdef CONFIG_ONENAND_IPL -_start_armboot: .word start_oneboot -#else -_start_armboot: .word start_armboot -#endif -#endif /* #if !defined(CONFIG_SYS_ARM_WITHOUT_RELOC) */ - -/****************************************************************************/ -/* */ -/* CPU_init_critical registers */ -/* */ -/* - setup important registers */ -/* - setup memory timing */ -/* */ -/****************************************************************************/ -/* mk@tbd: Fix this! */ -#undef RCSR -#undef ICMR -#undef OSMR3 -#undef OSCR -#undef OWER -#undef OIER -#undef CCCR - -/* Interrupt-Controller base address */ -IC_BASE: .word 0x40d00000 -#define ICMR 0x04 - -/* Reset-Controller */ -RST_BASE: .word 0x40f00030 -#define RCSR 0x00 - -/* Operating System Timer */ -OSTIMER_BASE: .word 0x40a00000 -#define OSMR3 0x0C -#define OSCR 0x10 -#define OWER 0x18 -#define OIER 0x1C - -/* Clock Manager Registers */ -#ifdef CONFIG_CPU_MONAHANS -# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO -# error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!" -# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */ -# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO -# define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1 -# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */ -#else /* !CONFIG_CPU_MONAHANS */ -#ifdef CONFIG_SYS_CPUSPEED -CC_BASE: .word 0x41300000 -#define CCCR 0x00 -cpuspeed: .word CONFIG_SYS_CPUSPEED -#else /* !CONFIG_SYS_CPUSPEED */ -#error "You have to define CONFIG_SYS_CPUSPEED!!" -#endif /* CONFIG_SYS_CPUSPEED */ -#endif /* CONFIG_CPU_MONAHANS */ - - /* takes care the CP15 update has taken place */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - -cpu_init_crit: - - /* mask all IRQs */ -#ifndef CONFIG_CPU_MONAHANS - ldr r0, IC_BASE - mov r1, #0x00 - str r1, [r0, #ICMR] -#else /* CONFIG_CPU_MONAHANS */ - /* Step 1 - Enable CP6 permission */ - mrc p15, 0, r1, c15, c1, 0 @ read CPAR - orr r1, r1, #0x40 - mcr p15, 0, r1, c15, c1, 0 - CPWAIT r1 - - /* Step 2 - Mask ICMR & ICMR2 */ - mov r1, #0 - mcr p6, 0, r1, c1, c0, 0 @ ICMR - mcr p6, 0, r1, c7, c0, 0 @ ICMR2 - - /* turn off all clocks but the ones we will definitly require */ - ldr r1, =CKENA - ldr r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC) - str r2, [r1] - ldr r1, =CKENB - ldr r2, =(CKENB_6_IRQ) - str r2, [r1] -#endif /* !CONFIG_CPU_MONAHANS */ - - /* set clock speed */ -#ifdef CONFIG_CPU_MONAHANS - ldr r0, =ACCR - ldr r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK)) - str r1, [r0] -#else /* !CONFIG_CPU_MONAHANS */ -#ifdef CONFIG_SYS_CPUSPEED - ldr r0, CC_BASE - ldr r1, cpuspeed - str r1, [r0, #CCCR] - mov r0, #2 - mcr p14, 0, r0, c6, c0, 0 - -setspeed_done: - -#endif /* CONFIG_SYS_CPUSPEED */ -#endif /* CONFIG_CPU_MONAHANS */ - - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - mov ip, lr - bl lowlevel_init - mov lr, ip - - /* Memory interfaces are working. Disable MMU and enable I-cache. */ - /* mk: hmm, this is not in the monahans docs, leave it now but - * check here if it doesn't work :-) */ - - ldr r0, =0x2001 /* enable access to all coproc. */ - mcr p15, 0, r0, c15, c1, 0 - CPWAIT r0 - - mcr p15, 0, r0, c7, c10, 4 /* drain the write & fill buffers */ - CPWAIT r0 - - mcr p15, 0, r0, c7, c7, 0 /* flush Icache, Dcache and BTB */ - CPWAIT r0 - - mcr p15, 0, r0, c8, c7, 0 /* flush instuction and data TLBs */ - CPWAIT r0 - - /* Enable the Icache */ -/* - mrc p15, 0, r0, c1, c0, 0 - orr r0, r0, #0x1800 - mcr p15, 0, r0, c1, c0, 0 - CPWAIT -*/ - mov pc, lr +#endif /* #if !defined(CONFIG_ONENAND_IPL) */ #ifndef CONFIG_PRELOADER /****************************************************************************/ @@ -676,6 +566,12 @@ fiq: /* perform a watchdog timeout for a soft reset. */ /* */ /****************************************************************************/ +/* Operating System Timer */ +OSTIMER_BASE: .word 0x40a00000 +#define OSMR3 0x0C +#define OSCR 0x10 +#define OWER 0x18 +#define OIER 0x1C .align 5 .globl reset_cpu @@ -703,3 +599,25 @@ reset_cpu: reset_endless: b reset_endless + +#ifndef CONFIG_PRELOADER +.section .mmudata, "a" + .align 14 + .globl mmu_table +mmu_table: + /* 0x00000000 - 0xa0000000 : 1:1, uncached mapping */ + .set __base, 0 + .rept 0xa00 + .word (__base << 20) | 0xc12 + .set __base, __base + 1 + .endr + + /* 0xa0000000 - 0xa0100000 : 1:1, cached mapping */ + .word (0xa00 << 20) | 0x1c1e + + .set __base, 0xa01 + .rept 0x1000 - 0xa01 + .word (__base << 20) | 0xc12 + .set __base, __base + 1 + .endr +#endif |