ls1028a: Configure stream IDs for integrated PCI and fix up Linux DT

Hardware comes out of reset with implicit values, but these are outside
the accepted range for Layerscape gen 3 chassis spec used on LS1028A.
Allocate different IDs and fix up Linux DT to use them.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

4 files changed, 119 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 6c87c1b11a..639f531649 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -1101,6 +1101,12 @@ static void config_core_prefetch(void)
 	}
 }
 
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+__weak void set_ecam_icids(void)
+{
+}
+#endif
+
 int arch_early_init_r(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
@@ -1153,6 +1159,9 @@ int arch_early_init_r(void)
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	setup_qbman_portals();
 #endif
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+	set_ecam_icids();
+#endif
 	return 0;
 }
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index e993209593..1e7e46e88a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -421,6 +421,12 @@ static void fdt_disable_multimedia(void *blob, unsigned int svr)
 }
 #endif
 
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+__weak void fdt_fixup_ecam(void *blob)
+{
+}
+#endif
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -485,4 +491,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_ARCH_LS1028A
 	fdt_disable_multimedia(blob, svr);
 #endif
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+	fdt_fixup_ecam(blob);
+#endif
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
index 9462298fbf..8110412da6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
@@ -33,3 +33,96 @@ struct icid_id_table icid_tbl[] = {
 };
 
 int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+/* integrated PCI is handled separately as it's not part of CCSR/SCFG */
+#ifdef CONFIG_PCIE_ECAM_GENERIC
+
+#define ECAM_IERB_BASE		0x1f0800000ULL
+#define ECAM_IERB_OFFSET_NA	-1
+#define ECAM_IERB_FUNC_CNT	ARRAY_SIZE(ierb_offset)
+/* cache related transaction attributes for PCIe functions */
+#define ECAM_IERB_MSICAR		(ECAM_IERB_BASE + 0xa400)
+#define ECAM_IERB_MSICAR_VALUE		0x30
+
+/* offset of IERB config register per PCI function */
+static int ierb_offset[] = {
+	0x0800,
+	0x1800,
+	0x2800,
+	0x3800,
+	0x4800,
+	0x5800,
+	0x6800,
+	ECAM_IERB_OFFSET_NA,
+	0x0804,
+	0x0808,
+	0x1804,
+	0x1808,
+};
+
+/*
+ * Use a custom function for LS1028A, for now this is the only SoC with IERB
+ * and we're currently considering reorganizing IERB for future SoCs.
+ */
+void set_ecam_icids(void)
+{
+	int i;
+
+	out_le32(ECAM_IERB_MSICAR, ECAM_IERB_MSICAR_VALUE);
+
+	for (i = 0; i < ECAM_IERB_FUNC_CNT; i++) {
+		if (ierb_offset[i] == ECAM_IERB_OFFSET_NA)
+			continue;
+
+		out_le32(ECAM_IERB_BASE + ierb_offset[i],
+			 FSL_ECAM_STREAM_ID_START + i);
+	}
+}
+
+static int fdt_setprop_inplace_idx_u32(void *fdt, int nodeoffset,
+				       const char *name, uint32_t idx, u32 val)
+{
+	val = cpu_to_be32(val);
+	return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name,
+						   strlen(name),
+						   idx * sizeof(val), &val,
+						   sizeof(val));
+}
+
+static int fdt_getprop_len(void *fdt, int nodeoffset, const char *name)
+{
+	int len;
+
+	if (fdt_getprop_namelen(fdt, nodeoffset, name, strlen(name), &len))
+		return len;
+
+	return 0;
+}
+
+void fdt_fixup_ecam(void *blob)
+{
+	int off;
+
+	off = fdt_node_offset_by_compatible(blob, 0, "pci-host-ecam-generic");
+	if (off < 0) {
+		debug("ECAM node not found\n");
+		return;
+	}
+
+	if (fdt_getprop_len(blob, off, "msi-map") != 16 ||
+	    fdt_getprop_len(blob, off, "iommu-map") != 16) {
+		log_err("invalid msi/iommu-map propertly size in ECAM node\n");
+		return;
+	}
+
+	fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 2,
+				    FSL_ECAM_STREAM_ID_START);
+	fdt_setprop_inplace_idx_u32(blob, off, "msi-map", 3,
+				    ECAM_IERB_FUNC_CNT);
+
+	fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 2,
+				    FSL_ECAM_STREAM_ID_START);
+	fdt_setprop_inplace_idx_u32(blob, off, "iommu-map", 3,
+				    ECAM_IERB_FUNC_CNT);
+}
+#endif /* CONFIG_PCIE_ECAM_GENERIC */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index 94ea99a349..01d362d183 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -42,6 +42,10 @@
  *     -the MC is responsible for allocating and setting up 'isolation context
  *      IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices.
  *
+ *  - ECAM (integrated PCI)
+ *     - U-Boot applies the value here to HW and does DT fix-up for both
+ *       'iommu-map' and 'msi-map'
+ *
  * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for
  * each of the different bus masters.  The relationship between
  * the AMQ registers and stream IDs is defined in the table below:
@@ -98,6 +102,10 @@
 #define FSL_DPAA2_STREAM_ID_START	23
 #define FSL_DPAA2_STREAM_ID_END		63
 
+/* PCI IEPs, this overlaps DPAA2 but these two are exclusive at least for now */
+#define FSL_ECAM_STREAM_ID_START	32
+#define FSL_ECAM_STREAM_ID_END		63
+
 #define FSL_SEC_STREAM_ID		64
 #define FSL_SEC_JR1_STREAM_ID		65
 #define FSL_SEC_JR2_STREAM_ID		66