summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorPeng Fan <peng.fan@nxp.com>2016-12-11 19:24:37 +0800
committerStefano Babic <sbabic@denx.de>2016-12-16 11:38:24 +0100
commit47f73504d8a826a7a0c54aed974ff5457aa4c8b8 (patch)
tree0954ef8347162fa0f82edbc888d0313ef83a853e /arch/arm
parent3445373691bae4f2000b26df091a406f395df01d (diff)
arm: imx: add i.MX6SLL EVK board support
Add i.MX6SLL EVK board support. 1. Add imx6sll-evk device tree. 2. Enable SDHC/I2C/UART. 3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver. Boot Log: U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800) CPU: Freescale i.MX6SLL rev1.0 at 792MHz CPU: Commercial temperature grade (0C to 95C)Reset cause: POR Model: Freescale i.MX6SLL EVK Board Board: MX6SLL EVK DRAM: 2 GiB i2c bus 0 at 35258368, no gpio pinctrl state. PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/mx6/Kconfig7
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/imx6sll-evk.dts801
3 files changed, 809 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index ba33d4cc56..eefe629187 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -146,6 +146,12 @@ config TARGET_MX6SLEVK
bool "mx6slevk"
select SUPPORT_SPL
+config TARGET_MX6SLLEVK
+ bool "mx6sll evk"
+ select MX6SLL
+ select DM
+ select DM_THERMAL
+
config TARGET_MX6SXSABRESD
bool "mx6sxsabresd"
select MX6SX
@@ -283,6 +289,7 @@ source "board/freescale/mx6qarm2/Kconfig"
source "board/freescale/mx6qsabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
source "board/freescale/mx6sxsabresd/Kconfig"
source "board/freescale/mx6sxsabreauto/Kconfig"
source "board/freescale/mx6ul_14x14_evk/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f43746966c..fde123277c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -294,6 +294,7 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
bk4r1.dtb
dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+ imx6sll-evk.dtb \
imx6dl-icore.dtb \
imx6q-icore.dtb
diff --git a/arch/arm/dts/imx6sll-evk.dts b/arch/arm/dts/imx6sll-evk.dts
new file mode 100644
index 0000000000..b4af007c98
--- /dev/null
+++ b/arch/arm/dts/imx6sll-evk.dts
@@ -0,0 +1,801 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+ model = "Freescale i.MX6SLL EVK Board";
+ compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ battery: max8903@0 {
+ compatible = "fsl,max8903-charger";
+ pinctrl-names = "default";
+ dok_input = <&gpio4 13 1>;
+ uok_input = <&gpio4 13 1>;
+ chg_input = <&gpio4 15 1>;
+ flt_input = <&gpio4 14 1>;
+ fsl,dcm_always_high;
+ fsl,dc_valid;
+ fsl,adc_disable;
+ status = "okay";
+ };
+
+ pxp_v4l2_out {
+ compatible = "fsl,imx6sl-pxp-v4l2";
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_aud3v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "wm8962-supply-3v15";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-boot-on;
+ };
+
+ reg_aud4v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "wm8962-supply-4v2";
+ regulator-min-microvolt = <4325000>;
+ regulator-max-microvolt = <4325000>;
+ regulator-boot-on;
+ };
+
+ reg_lcd: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "lcd-pwr";
+ gpio = <&gpio4 8 0>;
+ enable-active-high;
+ };
+
+ reg_sd1_vmmc: sd1_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_sd2_vmmc: sd2_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "eMMC-VCCQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ reg_sd3_vmmc: sd3_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD3_WIFI";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ };
+
+ sound {
+ compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ cpu-dai = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ codec-master;
+ hp-det-gpios = <&gpio4 24 1>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux3>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+ soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ max17135: max17135@48 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_max17135>;
+ compatible = "maxim,max17135";
+ reg = <0x48>;
+ status = "okay";
+
+ vneg_pwrup = <1>;
+ gvee_pwrup = <2>;
+ vpos_pwrup = <10>;
+ gvdd_pwrup = <12>;
+ gvdd_pwrdn = <1>;
+ vpos_pwrdn = <2>;
+ gvee_pwrdn = <8>;
+ vneg_pwrdn = <10>;
+ gpio_pmic_pwrgood = <&gpio2 13 0>;
+ gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+ gpio_pmic_wakeup = <&gpio2 14 0>;
+ gpio_pmic_v3p3 = <&gpio2 7 0>;
+ gpio_pmic_intr = <&gpio2 12 0>;
+
+ regulators {
+ DISPLAY_reg: DISPLAY {
+ regulator-name = "DISPLAY";
+ };
+
+ GVDD_reg: GVDD {
+ /* 20v */
+ regulator-name = "GVDD";
+ };
+
+ GVEE_reg: GVEE {
+ /* -22v */
+ regulator-name = "GVEE";
+ };
+
+ HVINN_reg: HVINN {
+ /* -22v */
+ regulator-name = "HVINN";
+ };
+
+ HVINP_reg: HVINP {
+ /* 20v */
+ regulator-name = "HVINP";
+ };
+
+ VCOM_reg: VCOM {
+ regulator-name = "VCOM";
+ /* 2's-compliment, -4325000 */
+ regulator-min-microvolt = <0xffbe0178>;
+ /* 2's-compliment, -500000 */
+ regulator-max-microvolt = <0xfff85ee0>;
+ };
+
+ VNEG_reg: VNEG {
+ /* -15v */
+ regulator-name = "VNEG";
+ };
+
+ VPOS_reg: VPOS {
+ /* 15v */
+ regulator-name = "VPOS";
+ };
+
+ V3P3_reg: V3P3 {
+ regulator-name = "V3P3";
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+ DCVDD-supply = <&vgen3_reg>;
+ DBVDD-supply = <&reg_aud3v>;
+ AVDD-supply = <&vgen3_reg>;
+ CPVDD-supply = <&vgen3_reg>;
+ MICVDD-supply = <&reg_aud3v>;
+ PLLVDD-supply = <&vgen3_reg>;
+ SPKVDD1-supply = <&reg_aud4v>;
+ SPKVDD2-supply = <&reg_aud4v>;
+ amic-mono;
+ };
+};
+
+&gpc {
+ fsl,ldo-bypass = <1>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6sll-evk {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+ MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+ /*
+ * Must set the LVE of pad SD2_RESET, otherwise current
+ * leakage through eMMC chip will pull high the VCCQ to
+ * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+ */
+ MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
+ MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+ MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
+ MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+ MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+ /* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
+ MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+ MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+ MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x17000
+ >;
+ };
+
+ pinctrl_audmux3: audmux3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
+ MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
+ MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
+ MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
+ MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x1b088
+ MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x1b088
+ MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x1b088
+ MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x1b088
+ MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x1b088
+ MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x1b088
+ MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x1b088
+ MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x1b088
+ MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x1b088
+ MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x1b088
+ MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x1b088
+ MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x1b088
+ MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x80000000
+ MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x80000000
+ >;
+ };
+
+ pinctrl_epdc0: epdcgrp0 {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x100b1
+ MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x100b1
+ MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x100b1
+ MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x100b1
+ MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x100b1
+ MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x100b1
+ MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x100b1
+ MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x100b1
+ MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x100b1
+ MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x100b1
+ MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x100b1
+ MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x100b1
+ MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x100b1
+ MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x100b1
+ MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x100b1
+ MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x100b1
+ MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x100b1
+ MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x100b1
+ MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x100b1
+ MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x100b1
+ MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x100b1
+ MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x100b1
+ MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x100b1
+ MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x100b1
+ MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x100b1
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79
+ MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79
+ MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79
+ MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79
+ MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79
+ MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79
+ MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79
+ MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79
+ MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79
+ MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79
+ MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79
+ MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79
+ MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x79
+ >;
+ };
+
+ pinctrl_max17135: max17135grp-1 {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x80000000 /* pwrgood */
+ MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x80000000 /* vcom_ctrl */
+ MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x80000000 /* wakeup */
+ MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x80000000 /* v3p3 */
+ MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x80000000 /* pwr int */
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1 /* bt reg on */
+ MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
+ MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5dte: uart5dtegrp {
+ fsl,pins = <
+ MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
+ MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
+ MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9
+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x13059
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x17059
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x17059
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x17059
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x17059
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x17059
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x17059
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x17059
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x17059
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x413059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130b9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170b9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170b9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170b9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170b9
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170b9
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170b9
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170b9
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170b9
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6SLL_PAD_SD2_CLK__SD2_CLK 0x130f9
+ MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x170f9
+ MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x170f9
+ MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x170f9
+ MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x170f9
+ MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x170f9
+ MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x170f9
+ MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x170f9
+ MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x170f9
+ MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x4130f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13059
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17059
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17059
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17059
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130b9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+ fsl,pins = <
+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9
+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x4041b8b1
+ MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x4041b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pmw1grp {
+ fsl,pins = <
+ MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0
+ >;
+ };
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ lcd-supply = <&reg_lcd>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pxp {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ /* for DTE mode, add below change */
+ /* fsl,dte-mode; */
+ /* pinctrl-0 = <&pinctrl_uart5dte>; */
+ status = "disabled";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&reg_sd1_vmmc>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ vqmmc-supply = <&reg_sd2_vmmc>;
+ bus-width = <8>;
+ no-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&reg_sd3_vmmc>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ disable-over-current;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&epdc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdc0>;
+ V3P3-supply = <&V3P3_reg>;
+ VCOM-supply = <&VCOM_reg>;
+ DISPLAY-supply = <&DISPLAY_reg>;
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};