ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*

I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify
they belong to UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

5 files changed, 14 insertions, 15 deletions

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 28d574fbb8..d7a19c6772 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -8,20 +8,20 @@ config UNIPHIER_SMP
 
 choice
 	prompt "UniPhier SoC select"
-	default MACH_PH1_PRO4
+	default ARCH_UNIPHIER_PH1_PRO4
 
-config MACH_PH1_SLD3
+config ARCH_UNIPHIER_PH1_SLD3
 	bool "PH1-sLD3"
 	select UNIPHIER_SMP
 
-config MACH_PH1_LD4
+config ARCH_UNIPHIER_PH1_LD4
 	bool "PH1-LD4"
 
-config MACH_PH1_PRO4
+config ARCH_UNIPHIER_PH1_PRO4
 	bool "PH1-Pro4"
 	select UNIPHIER_SMP
 
-config MACH_PH1_SLD8
+config ARCH_UNIPHIER_PH1_SLD8
 	bool "PH1-sLD8"
 
 endchoice
@@ -53,11 +53,11 @@ choice
 
 config DDR_FREQ_1600
 	bool "DDR3 1600"
-	depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4
+	depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_PRO4
 
 config DDR_FREQ_1333
 	bool "DDR3 1333"
-	depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8
+	depends on ARCH_UNIPHIER_PH1_SLD3 || ARCH_UNIPHIER_PH1_LD4 || ARCH_UNIPHIER_PH1_SLD8
 
 endchoice
 
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index df6a569b9a..d30cc27009 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -31,7 +31,7 @@ obj-y += timer.o
 
 obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
 
-obj-$(CONFIG_MACH_PH1_SLD3)	+= ph1-sld3/
-obj-$(CONFIG_MACH_PH1_LD4)	+= ph1-ld4/
-obj-$(CONFIG_MACH_PH1_PRO4)	+= ph1-pro4/
-obj-$(CONFIG_MACH_PH1_SLD8)	+= ph1-sld8/
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3)	+= ph1-sld3/
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4)	+= ph1-ld4/
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4)	+= ph1-pro4/
+obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8)	+= ph1-sld8/
diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
index fce0c01246..01f5c52c9c 100644
--- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h
@@ -156,7 +156,8 @@ struct ddrphy {
 /* SoC-specific parameters */
 #define NR_DATX8_PER_DDRPHY	2
 
-#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \
+	defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
 #define NR_DDRPHY_PER_CH		1
 #else
 #define NR_DDRPHY_PER_CH		2
diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h
index df50294077..9d697b16ee 100644
--- a/arch/arm/mach-uniphier/include/mach/sc-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h
@@ -9,7 +9,7 @@
 #ifndef ARCH_SC_REGS_H
 #define ARCH_SC_REGS_H
 
-#if defined(CONFIG_MACH_PH1_SLD3)
+#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
 #define SC_BASE_ADDR			0xf1840000
 #else
 #define SC_BASE_ADDR			0x61840000
diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
index d693368816..8ae8ed65b8 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
+++ b/arch/arm/mach-uniphier/ph1-pro4/pll_init.c
@@ -54,12 +54,10 @@ static void vpll_init(void)
 	tmp = readl(SG_PINMON0);
 	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
 
-#if defined(CONFIG_MACH_PH1_PRO4)
 	/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
 	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
 	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
 		return;
-#endif
 
 	/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
 	tmp = readl(SC_VPLL27ACTRL);