arm: copy_loop(): use scratch register

This patch uses r1 as scratch register for copy_loop(). Therefore we do
not longer need r7 for the storage of relocate_code()'s 'addr_moni' (the
destination address of relocation).
Therefore r7 can be used later on for other purposes.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

14 files changed, 70 insertions, 70 deletions

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 7b59619c17..7e3b3104e9 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -187,13 +187,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -202,7 +202,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -211,7 +211,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -252,7 +252,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -281,7 +281,7 @@ jump_2_ram:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index ddfefd441c..5c1899311c 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -241,13 +241,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -256,7 +256,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -265,7 +265,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -344,7 +344,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -373,7 +373,7 @@ _nand_boot: .word nand_boot
 	add     lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index da0e61e6da..e3d81597da 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -156,13 +156,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -171,7 +171,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -180,7 +180,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -221,7 +221,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -245,7 +245,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 69a54cb91f..b8d20d3b76 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -202,13 +202,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -217,7 +217,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -226,7 +226,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -267,7 +267,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -298,7 +298,7 @@ _nand_boot_ofs:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index a9b5e48f8e..6d6d8f8504 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -193,13 +193,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -208,7 +208,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -217,7 +217,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -258,7 +258,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -289,7 +289,7 @@ _nand_boot_ofs:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index bf4988d42a..d3f563036e 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -192,13 +192,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -207,7 +207,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -216,7 +216,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -257,7 +257,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -288,7 +288,7 @@ _nand_boot_ofs:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 80fee31075..e3a84a1367 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -164,13 +164,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -179,7 +179,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -188,7 +188,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -229,7 +229,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -255,7 +255,7 @@ _nand_boot: .word nand_boot
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 0e8a21b3d9..752c2a5d1b 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -160,13 +160,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -175,7 +175,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -184,7 +184,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -225,7 +225,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -256,7 +256,7 @@ _nand_boot_ofs:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index de9d1e2f36..fe982352f5 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -160,7 +160,6 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
@@ -170,6 +169,7 @@ stack_setup:
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	cmp	r0, r6
 #ifndef CONFIG_PRELOADER
 	beq	jump_2_ram
@@ -177,7 +177,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -186,7 +186,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -225,7 +225,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -247,7 +247,7 @@ jump_2_ram:
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 75ee6775e2..61264008d3 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -286,13 +286,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -301,7 +301,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -310,7 +310,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -351,7 +351,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -375,7 +375,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 2fa3614194..e9af2631cd 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -173,13 +173,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -188,7 +188,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -197,7 +197,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -238,7 +238,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -259,7 +259,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 66479cb957..7e1c6e62aa 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -238,13 +238,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -254,7 +254,7 @@ stack_setup:
 	stmfd sp!, {r0-r12}
 copy_loop:
 	ldmia	r0!, {r3-r5, r7-r11}	/* copy from source address [r0]    */
-	stmia	r6!, {r3-r5, r7-r11}	/* copy to   target address [r1]    */
+	stmia	r1!, {r3-r5, r7-r11}	/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 	ldmfd sp!, {r0-r12}
@@ -264,7 +264,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -305,7 +305,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -333,7 +333,7 @@ _start_oneboot_ofs
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 5559431551..89e42b1937 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -145,13 +145,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -160,7 +160,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -169,7 +169,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -210,7 +210,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -234,7 +234,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr
 
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 4fb0b8b415..a769687983 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -149,13 +149,13 @@ relocate_code:
 	mov	r4, r0	/* save addr_sp */
 	mov	r5, r1	/* save addr of gd */
 	mov	r6, r2	/* save addr of destination */
-	mov	r7, r2	/* save addr of destination */
 
 	/* Set up the stack						    */
 stack_setup:
 	mov	sp, r4
 
 	adr	r0, _start
+	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r2, _TEXT_BASE
 	ldr	r3, _bss_start_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
@@ -164,7 +164,7 @@ stack_setup:
 
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
+	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -173,7 +173,7 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r7, r0		/* r9 <- relocation offset */
+	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -214,7 +214,7 @@ clear_bss:
 	ldr	r0, _bss_start_ofs
 	ldr	r1, _bss_end_ofs
 	ldr	r3, _TEXT_BASE		/* Text base */
-	mov	r4, r7			/* reloc addr */
+	mov	r4, r6			/* reloc addr */
 	add	r0, r0, r4
 	add	r1, r1, r4
 	mov	r2, #0x00000000		/* clear			    */
@@ -235,7 +235,7 @@ clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	lr, lr, r9
 	/* setup parameters for board_init_r */
 	mov	r0, r5		/* gd_t */
-	mov	r1, r7		/* dest_addr */
+	mov	r1, r6		/* dest_addr */
 	/* jump to it ... */
 	mov	pc, lr