ARM: kirkwood: add db-88f6281-bp board

This is Marvell's Kirkwood development board. It has the following
features

 - 512M DDR2
 - 2 PCI connectors
 - 1 x1 PCI-e interface
 - 1 Gigabit Ethernet Port
 - 2 SATA Ports
 - USB 2.0 Interface
 - SDIO
 - 128M NAND Flash
 - 16M SPI Flash

It can be strapped to boot from SPI or NAND so there are two defconfigs
(one per boot media).

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>

5 files changed, 174 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ec89c307f2..1366ae93e2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -37,6 +37,8 @@ dtb-$(CONFIG_KIRKWOOD) += \
 	kirkwood-atl-sbx81lifxcat.dtb \
 	kirkwood-blackarmor-nas220.dtb \
 	kirkwood-d2net.dtb \
+	kirkwood-db-88f6281.dtb \
+	kirkwood-db-88f6281-spi.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
new file mode 100644
index 0000000000..50b1b0d4a5
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db-88f6281.dts"
+
+/ {
+	aliases {
+		spi0 = &spi0;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		mode = <0>;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00c00000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00c00000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00100000 0x00f00000>;
+			label = "unused";
+		};
+	};
+};
+
+&nand {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts
new file mode 100644
index 0000000000..2adb17c955
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db-88f6281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi
new file mode 100644
index 0000000000..b81d8e8298
--- /dev/null
+++ b/arch/arm/dts/kirkwood-db.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		spi0 = &spi0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 3b860c4f55..7c4170399a 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -65,6 +65,9 @@ config TARGET_SBx81LIFKW
 config TARGET_SBx81LIFXCAT
 	bool "Allied Telesis SBx81GP24/SBx81GT24"
 
+config TARGET_DB_88F6281_BP
+	bool "Marvell DB-88F6281-BP"
+
 endchoice
 
 config SYS_SOC
@@ -89,5 +92,6 @@ source "board/Seagate/nas220/Kconfig"
 source "board/zyxel/nsa310s/Kconfig"
 source "board/alliedtelesis/SBx81LIFKW/Kconfig"
 source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
+source "board/Marvell/db-88f6281-bp/Kconfig"
 
 endif