Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Conflicts:
	boards.cfg

129 files changed, 4438 insertions, 786 deletions

diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 66ecc2ee4d..5fa182536d 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -116,6 +116,10 @@ else
 OBJCOPYFLAGS += -j .text -j .rodata -j .hash -j .data -j .got.plt -j .u_boot_list -j .rel.dyn
 endif
 
+ifdef CONFIG_OF_EMBED
+OBJCOPYFLAGS += -j .dtb.init.rodata
+endif
+
 ifneq ($(CONFIG_IMX_CONFIG),)
 ifdef CONFIG_SPL
 ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
index bf2fa2ac32..cfad206edd 100644
--- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
@@ -2,48 +2,457 @@
  * Low-level initialization for EP93xx
  *
  * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ * Copyright (C) 2013
+ * Sergey Kostanabev <sergey.kostanbaev <at> fairwaves.ru>
  *
  * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ * Copyright (C) 2006 Cirrus Logic Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include <version.h>
-#include <asm/arch/ep93xx.h>
+#include <config.h>
+#include <asm/arch-ep93xx/ep93xx.h>
+
+/*
+/* Configure the SDRAM based on the supplied settings.
+ *
+ * Input:	r0 - SDRAM DEVCFG register
+ *		r2 - configuration for SDRAM chips
+ * Output:	none
+ * Modifies:	r3, r4
+ */
+ep93xx_sdram_config:
+	/* Program the SDRAM device configuration register. */
+	ldr	r3, =SDRAM_BASE
+#ifdef CONFIG_EDB93XX_SDCS0
+	str	r0, [r3, #SDRAM_OFF_DEVCFG0]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	str	r0, [r3, #SDRAM_OFF_DEVCFG1]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	str	r0, [r3, #SDRAM_OFF_DEVCFG2]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	str	r0, [r3, #SDRAM_OFF_DEVCFG3]
+#endif
+
+	/* Set the Initialize and MRS bits (issue continuous NOP commands
+	 * (INIT & MRS set))
+	 */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_MRS | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Delay for 200us. */
+	mov	r4, #0x3000
+delay1:
+	subs	r4, r4, #1
+	bne	delay1
+
+	/* Clear the MRS bit to issue a precharge all. */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_INIT | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_CKE)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Temporarily set the refresh timer to 0x10. Make it really low so
+	 * that refresh cycles are generated.
+	 */
+	ldr	r4, =0x10
+	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]
+
+	/* Delay for at least 80 SDRAM clock cycles. */
+	mov	r4, #80
+delay2:
+	subs	r4, r4, #1
+	bne	delay2
+
+	/* Set the refresh timer to the fastest required for any device
+	 * that might be used. Set 9.6 ms refresh time.
+	 */
+	ldr	r4, =0x01e0
+	str	r4, [r3, #SDRAM_OFF_REFRSHTIMR]
+
+	/* Select mode register update mode. */
+	ldr	r4, =(EP93XX_SDRAMCTRL_GLOBALCFG_CKE | \
+			EP93XX_SDRAMCTRL_GLOBALCFG_MRS)
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Program the mode register on the SDRAM by performing fake read */
+	ldr	r4, [r2]
+
+	/* Select normal operating mode. */
+	ldr	r4, =EP93XX_SDRAMCTRL_GLOBALCFG_CKE
+	str	r4, [r3, #SDRAM_OFF_GLCONFIG]
+
+	/* Return to the caller. */
+	mov	pc, lr
+
+/*
+ * Test to see if the SDRAM has been configured in a usable mode.
+ *
+ * Input:	r0 - Test address of SDRAM
+ * Output:	r0 - 0 -- Test OK, -1 -- Failed
+ * Modifies:	r0-r5
+ */
+ep93xx_sdram_test:
+	/* Load the test patterns to be written to SDRAM. */
+	ldr	r1, =0xf00dface
+	ldr	r2, =0xdeadbeef
+	ldr	r3, =0x08675309
+	ldr	r4, =0xdeafc0ed
+
+	/* Store the test patterns to SDRAM. */
+	stmia	r0, {r1-r4}
+
+	/* Load the test patterns from SDRAM one at a time and compare them
+	 * to the actual pattern.
+	 */
+	ldr	r5, [r0]
+	cmp	r5, r1
+	ldreq	r5, [r0, #0x0004]
+	cmpeq	r5, r2
+	ldreq	r5, [r0, #0x0008]
+	cmpeq	r5, r3
+	ldreq	r5, [r0, #0x000c]
+	cmpeq	r5, r4
+
+	/* Return -1 if a mismatch was encountered, 0 otherwise. */
+	mvnne	r0, #0xffffffff
+	moveq	r0, #0x00000000
+
+	/* Return to the caller. */
+	mov	pc, lr
+
+/*
+ * Determine the size of the SDRAM. Use data=address for the scan.
+ *
+ * Input:	r0 - Start SDRAM address
+ * Return:	r0 - Single block size
+ *		r1 - Valid block mask
+ *		r2 - Total block count
+ * Modifies:	r0-r5
+ */
+ep93xx_sdram_size:
+	/* Store zero at offset zero. */
+	str	r0, [r0]
+
+	/* Start checking for an alias at 1MB into SDRAM. */
+	ldr	r1, =0x00100000
+
+	/* Store the offset at the current offset. */
+check_block_size:
+	str	r1, [r0, r1]
+
+	/* Read back from zero. */
+	ldr	r2, [r0]
+
+	/* Stop searching of an alias was found. */
+	cmp	r1, r2
+	beq	found_block_size
+
+	/* Advance to the next power of two boundary. */
+	mov	r1, r1, lsl #1
+
+	/* Loop back if the size has not reached 256MB. */
+	cmp	r1, #0x10000000
+	bne	check_block_size
+
+	/* A full 256MB of memory was found, so return it now. */
+	ldr	r0, =0x10000000
+	ldr	r1, =0x00000000
+	ldr	r2, =0x00000001
+	mov	pc, lr
+
+	/* An alias was found. See if the first block is 128MB in size. */
+found_block_size:
+	cmp	r1, #0x08000000
+
+	/* The first block is 128MB, so there is no further memory. Return it
+	 * now.
+	 */
+	ldreq	r0, =0x08000000
+	ldreq	r1, =0x00000000
+	ldreq	r2, =0x00000001
+	moveq	pc, lr
+
+	/* Save the block size, set the block address bits to zero, and
+	 * initialize the block count to one.
+	 */
+	mov	r3, r1
+	ldr	r4, =0x00000000
+	ldr	r5, =0x00000001
+
+	/* Look for additional blocks of memory by searching for non-aliases. */
+find_blocks:
+	/* Store zero back to address zero. It may be overwritten. */
+	str	r0, [r0]
+
+	/* Advance to the next power of two boundary. */
+	mov	r1, r1, lsl #1
+
+	/* Store the offset at the current offset. */
+	str	r1, [r0, r1]
+
+	/* Read back from zero. */
+	ldr	r2, [r0]
+
+	/* See if a non-alias was found. */
+	cmp	r1, r2
+
+	/* If a non-alias was found, then or in the block address bit and
+	 * multiply the block count by two (since there are two unique
+	 * blocks, one with this bit zero and one with it one).
+	 */
+	orrne	r4, r4, r1
+	movne	r5, r5, lsl #1
+
+	/* Continue searching if there are more address bits to check. */
+	cmp	r1, #0x08000000
+	bne	find_blocks
+
+	/* Return the block size, address mask, and count. */
+	mov	r0, r3
+	mov	r1, r4
+	mov	r2, r5
+
+	/* Return to the caller. */
+	mov	pc, lr
+
 
 .globl lowlevel_init
 lowlevel_init:
-	/* backup return address */
-	ldr r1, =SYSCON_SCRATCH0
-	str lr, [r1]
 
-	/* Turn on both LEDs */
-	bl red_led_on
-	bl green_led_on
+	mov	r6, lr
+
+	/* Make sure caches are off and invalidated. */
+	ldr	r0, =0x00000000
+	mcr	p15, 0, r0, c1, c0, 0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* Turn off the green LED and turn on the red LED. If the red LED
+	 * is left on for too long, the external reset circuit described
+	 * by application note AN258 will cause the system to reset.
+	 */
+	ldr	r1, =EP93XX_LED_DATA
+	ldr	r0, [r1]
+	bic	r0, r0, #EP93XX_LED_GREEN_ON
+	orr	r0, r0, #EP93XX_LED_RED_ON
+	str	r0, [r1]
+
+	/* Undo the silly static memory controller programming performed
+	 * by the boot rom.
+	 */
+	ldr	r0, =SMC_BASE
+
+	/* Set WST1 and WST2 to 31 HCLK cycles (slowest access) */
+	ldr	r1, =0x0000fbe0
+
+	/* Reset EP93XX_OFF_SMCBCR0 */
+	ldr	r2, [r0]
+	orr	r2, r2, r1
+	str	r2, [r0]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR1]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR1]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR2]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR2]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR3]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR3]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR6]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR6]
+
+	ldr	r2, [r0, #EP93XX_OFF_SMCBCR7]
+	orr	r2, r2, r1
+	str	r2, [r0, #EP93XX_OFF_SMCBCR7]
+
+	/* Set the PLL1 and processor clock. */
+	ldr	r0, =SYSCON_BASE
+#ifdef CONFIG_EDB9301
+	/* 332MHz, giving a 166MHz processor clock. */
+	ldr	r1, = 0x02b49907
+#else
+
+#ifdef CONFIG_EDB93XX_INDUSTRIAL
+	/* 384MHz, giving a 196MHz processor clock. */
+	ldr	r1, =0x02a4bb38
+#else
+	/* 400MHz, giving a 200MHz processor clock. */
+	ldr	r1, =0x02a4e39e
+#endif
+#endif
+	str	r1, [r0, #SYSCON_OFF_CLKSET1]
+
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* Need to make sure that SDRAM is configured correctly before
+	 * coping the code into it.
+	 */
+
+#ifdef CONFIG_EDB93XX_SDCS0
+	mov	r11, #SDRAM_DEVCFG0_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	mov	r11, #SDRAM_DEVCFG1_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	mov	r11, #SDRAM_DEVCFG2_BASE
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	ldr	r0, =SYSCON_BASE
+	ldr	r0, [r0, #SYSCON_OFF_SYSCFG]
+	ands	r0, r0, #SYSCON_SYSCFG_LASDO
+	moveq	r11, #SDRAM_DEVCFG3_ASD0_BASE
+	movne	r11, #SDRAM_DEVCFG3_ASD1_BASE
+#endif
+	/* See Table 13-5 in EP93xx datasheet for more info about DRAM
+	 * register mapping */
+
+	/* Try a 32-bit wide configuration of SDRAM. */
+	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
+			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
+			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2)
+
+	/* Set burst count: 4 and CAS: 2
+	 * Burst mode [A11:A10]; CAS [A16:A14]
+	 */
+	orr	r2, r11, #0x00008800
+	bl	ep93xx_sdram_config
+
+	/* Test the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_test
+	cmp	r0, #0x00000000
+	beq	ep93xx_sdram_done
+
+	/* Try a 16-bit wide configuration of SDRAM. */
+	ldr	r0, =(EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT | \
+			EP93XX_SDRAMCTRL_DEVCFG_SROMLL | \
+			EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2 | \
+			EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH)
+
+	/* Set burst count: 8, CAS: 2, sequential burst
+	 * Accoring to Table 13-3 for 16bit operations mapping must be shifted.
+	 * Burst mode [A10:A9]; CAS [A15:A13]
+	 */
+	orr	r2, r11, #0x00004600
+	bl	ep93xx_sdram_config
+
+	/* Test the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_test
+	cmp	r0, #0x00000000
+	beq	ep93xx_sdram_done
+
+	/* Turn off the red LED. */
+	ldr	r0, =EP93XX_LED_DATA
+	ldr	r1, [r0]
+	bic	r1, r1, #EP93XX_LED_RED_ON
+	str	r1, [r0]
+
+	/* There is no SDRAM so flash the green LED. */
+flash_green:
+	orr	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_1:
+	subs	r2, r2, #1
+	bne	flash_green_delay_1
+	bic	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_2:
+	subs	r2, r2, #1
+	bne	flash_green_delay_2
+	orr	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00010000
+flash_green_delay_3:
+	subs	r2, r2, #1
+	bne	flash_green_delay_3
+	bic	r1, r1, #EP93XX_LED_GREEN_ON
+	str	r1, [r0]
+	ldr	r2, =0x00050000
+flash_green_delay_4:
+	subs	r2, r2, #1
+	bne	flash_green_delay_4
+	b	flash_green
+
 
-	/* Configure flash wait states before we switch to the PLL */
-	bl flash_cfg
+ep93xx_sdram_done:
+	ldr	r1, =EP93XX_LED_DATA
+	ldr	r0, [r1]
+	bic	r0, r0, #EP93XX_LED_RED_ON
+	str	r0, [r1]
 
-	/* Set up PLL */
-	bl pll_cfg
+	/* Determine the size of the SDRAM. */
+	mov	r0, r11
+	bl	ep93xx_sdram_size
 
-	/* Turn off the Green LED and leave the Red LED on */
-	bl green_led_off
+	/* Save the SDRAM characteristics. */
+	mov	r8, r0
+	mov	r9, r1
+	mov	r10, r2
 
-	/* Setup SDRAM */
-	bl sdram_cfg
+	/* Compute total memory size into r1 */
+	mul	r1, r8, r10
+#ifdef CONFIG_EDB93XX_SDCS0
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG0]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS1
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG1]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS2
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG2]
+#endif
+#ifdef CONFIG_EDB93XX_SDCS3
+	ldr	r2, [r0, #SDRAM_OFF_DEVCFG3]
+#endif
 
-	/* Turn on Green LED, Turn off the Red LED */
-	bl green_led_on
-	bl red_led_off
+	/* Consider small DRAM size as:
+	 * < 32Mb for 32bit bus
+	 * < 64Mb for 16bit bus
+	 */
+	tst	r2, #EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH
+	moveq	r1, r1, lsr #1
+	cmp	r1, #0x02000000
 
-	/* FIXME: we use async mode for now */
-	mrc p15, 0, r0, c1, c0, 0
-	orr r0, r0, #0xc0000000
-	mcr p15, 0, r0, c1, c0, 0
+#if defined(CONFIG_EDB9301)
+	/* Set refresh counter to 20ms for small DRAM size, otherwise 9.6ms */
+	movlt	r1, #0x03f0
+	movge	r1, #0x01e0
+#else
+	/* Set refresh counter to 30.7ms for small DRAM size, otherwise 15ms */
+	movlt	r1, #0x0600
+	movge	r1, #0x2f0
+#endif
+	str	r1, [r0, #SDRAM_OFF_REFRSHTIMR]
 
-	/* restore return address */
-	ldr r1, =SYSCON_SCRATCH0
-	ldr lr, [r1]
+	/* Save the memory configuration information. */
+	orr	r0, r11, #UBOOT_MEMORYCNF_BANK_SIZE
+	stmia	r0, {r8-r11}
 
-	mov pc, lr
+	mov	lr, r6
+	mov	pc, lr
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
index 7d7725c4b8..0e6c0da1bd 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -165,3 +165,20 @@ void at91_macb_hw_init(void)
 #endif
 }
 #endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* MCI0 CLK */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* MCI0 CDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* MCI0 DA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 3, 0);	/* MCI0 DA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 4, 0);	/* MCI0 DA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 5, 0);	/* MCI0 DA3 */
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_MCI0, &pmc->pcer);
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index b91e948ce3..19730cef8c 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -14,7 +14,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/davinci_misc.h>
 #include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
+#include <asm/ti-common/davinci_nand.h>
 #include <asm/arch/pll_defs.h>
 
 void davinci_enable_uart0(void)
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
index ee096fe721..c8b44988d3 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
@@ -11,6 +11,7 @@
 #include <nand.h>
 #include <ns16550.h>
 #include <post.h>
+#include <asm/ti-common/davinci_nand.h>
 #include <asm/arch/dm365_lowlevel.h>
 #include <asm/arch/hardware.h>
 
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index d4711c070c..da80240052 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -13,7 +13,6 @@
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/kirkwood.h>
-#include <hush.h>
 
 #define BUFLEN	16
 
@@ -211,7 +210,7 @@ static void kw_sysrst_action(void)
 
 	debug("Starting %s process...\n", __FUNCTION__);
 	ret = run_command(s, 0);
-	if (ret < 0)
+	if (ret != 0)
 		debug("Error.. %s failed\n", __FUNCTION__);
 	else
 		debug("%s process finished\n", __FUNCTION__);
diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
index b55c5f0943..f88db3b1f9 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
@@ -15,7 +15,6 @@
 #include <asm/io.h>
 #include <u-boot/md5.h>
 #include <asm/arch/cpu.h>
-#include <hush.h>
 
 #define BUFLEN	16
 
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 28c16f8d02..828d10bb5a 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -144,6 +144,19 @@ int arch_misc_init(void)
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
+{
+	prcm_init();
+	set_mux_conf_regs();
+
+	return 0;
+}
+
+/*
  * This function is the place to do per-board things such as ramp up the
  * MPU clock frequency.
  */
@@ -224,7 +237,7 @@ void s_init(void)
 	set_uart_mux_conf();
 	setup_clocks_for_console();
 	uart_soft_reset();
-#ifdef CONFIG_NOR_BOOT
+#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT)
 	gd->baudrate = CONFIG_BAUDRATE;
 	serial_init();
 	gd->have_console = 1;
@@ -232,20 +245,13 @@ void s_init(void)
 	gd = &gdata;
 	preloader_console_init();
 #endif
-	prcm_init();
-	set_mux_conf_regs();
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
 #endif
+#ifdef CONFIG_SPL_BUILD
+	board_early_init_f();
 	sdram_init();
-}
 #endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
 }
-#endif /* !CONFIG_SYS_DCACHE_OFF */
+#endif
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 0672798fe0..ec7d46838b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -170,8 +170,19 @@ void do_enable_clocks(u32 *const *clk_domains,
 	};
 }
 
+/*
+ * Before scaling up the clocks we need to have the PMIC scale up the
+ * voltages first.  This will be dependent on which PMIC is in use
+ * and in some cases we may not be scaling things up at all and thus not
+ * need to do anything here.
+ */
+__weak void scale_vcores(void)
+{
+}
+
 void prcm_init()
 {
 	enable_basic_clocks();
+	scale_vcores();
 	setup_dplls();
 }
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index d0bc2340c8..31188c85bc 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -53,6 +53,8 @@ const struct dpll_regs dpll_ddr_regs = {
 
 void setup_clocks_for_console(void)
 {
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+
 	/* Do not add any spl_debug prints in this function */
 	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
 			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
@@ -63,6 +65,13 @@ void setup_clocks_for_console(void)
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+		clkctrl = readl(&cmwkup->wkup_uart0ctrl);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+	}
 }
 
 void enable_basic_clocks(void)
diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 9a625c4661..fc66872a31 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -94,7 +94,20 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 	writel(regs->emif_rd_wr_exec_thresh,
 	       &emif_reg[nr]->emif_rd_wr_exec_thresh);
 
+	/*
+	 * for most SOCs these registers won't need to be changed so only
+	 * write to these registers if someone explicitly has set the
+	 * register's value.
+	 */
+	if(regs->emif_cos_config) {
+		writel(regs->emif_prio_class_serv_map, &emif_reg[nr]->emif_prio_class_serv_map);
+		writel(regs->emif_connect_id_serv_1_map, &emif_reg[nr]->emif_connect_id_serv_1_map);
+		writel(regs->emif_connect_id_serv_2_map, &emif_reg[nr]->emif_connect_id_serv_2_map);
+		writel(regs->emif_cos_config, &emif_reg[nr]->emif_cos_config);
+	}
+
 	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
+	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw);
 	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 	writel(regs->sdram_config, &cstat->secure_emif_sdram_config);
 
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 2c67c322ca..8b7527c5b4 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -21,6 +21,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	sdram_init();
+#endif
+
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size(
 			(void *)CONFIG_SYS_SDRAM_BASE,
@@ -111,7 +115,7 @@ void config_ddr(unsigned int pll, const struct ctrl_ioregs *ioregs,
 #endif
 #ifdef CONFIG_AM43XX
 	writel(readl(&cm_device->cm_dll_ctrl) & ~0x1, &cm_device->cm_dll_ctrl);
-	while ((readl(&cm_device->cm_dll_ctrl) && CM_DLL_READYST) == 0)
+	while ((readl(&cm_device->cm_dll_ctrl) & CM_DLL_READYST) == 0)
 		;
 	writel(0x80000000, &ddrctrl->ddrioctrl);
 
diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
new file mode 100644
index 0000000000..09eab70955
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/config.mk
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2014, Andreas Bießmann <andreas.devel@googlemail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y	+= boot.bin
+else
+ALL-y	+= u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
index 2fbf60d542..8d86f97e3d 100644
--- a/arch/arm/cpu/armv7/at91/cpu.c
+++ b/arch/arm/cpu/armv7/at91/cpu.c
@@ -61,6 +61,8 @@ int print_cpuinfo(void)
 
 void enable_caches(void)
 {
+	icache_enable();
+	dcache_enable();
 }
 
 unsigned int get_chip_id(void)
diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
index bc5fc423d6..a2c4032fed 100644
--- a/arch/arm/cpu/armv7/cache_v7.c
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -354,41 +354,10 @@ void invalidate_icache_all(void)
 }
 #endif
 
-/*
- * Stub implementations for outer cache operations
- */
-void __v7_outer_cache_enable(void)
-{
-}
-void v7_outer_cache_enable(void)
-	__attribute__((weak, alias("__v7_outer_cache_enable")));
-
-void __v7_outer_cache_disable(void)
-{
-}
-void v7_outer_cache_disable(void)
-	__attribute__((weak, alias("__v7_outer_cache_disable")));
-
-void __v7_outer_cache_flush_all(void)
-{
-}
-void v7_outer_cache_flush_all(void)
-	__attribute__((weak, alias("__v7_outer_cache_flush_all")));
-
-void __v7_outer_cache_inval_all(void)
-{
-}
-void v7_outer_cache_inval_all(void)
-	__attribute__((weak, alias("__v7_outer_cache_inval_all")));
-
-void __v7_outer_cache_flush_range(u32 start, u32 end)
-{
-}
-void v7_outer_cache_flush_range(u32 start, u32 end)
-	__attribute__((weak, alias("__v7_outer_cache_flush_range")));
-
-void __v7_outer_cache_inval_range(u32 start, u32 end)
-{
-}
-void v7_outer_cache_inval_range(u32 start, u32 end)
-	__attribute__((weak, alias("__v7_outer_cache_inval_range")));
+/*  Stub implementations for outer cache operations */
+__weak void v7_outer_cache_enable(void) {}
+__weak void v7_outer_cache_disable(void) {}
+__weak void v7_outer_cache_flush_all(void) {}
+__weak void v7_outer_cache_inval_all(void) {}
+__weak void v7_outer_cache_flush_range(u32 start, u32 end) {}
+__weak void v7_outer_cache_inval_range(u32 start, u32 end) {}
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 1fea4d6663..400d134d54 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -869,7 +869,7 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 {
 	struct exynos4_clock *clk =
 		(struct exynos4_clock *)samsung_get_base_clock();
-	unsigned int addr;
+	unsigned int addr, clear_bit, set_bit;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -877,44 +877,26 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 	 * CLK_DIV_FSYS2
 	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
 	 * CLK_DIV_FSYS3
-	 * MMC4_PRE_RATIO [15:8]
+	 * MMC4_RATIO [3:0]
 	 */
 	if (dev_index < 2) {
 		addr = (unsigned int)&clk->div_fsys1;
-	}  else if (dev_index == 4) {
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
+	} else if (dev_index == 4) {
 		addr = (unsigned int)&clk->div_fsys3;
 		dev_index -= 4;
+		/* MMC4 is controlled with the MMC4_RATIO value */
+		clear_bit = MASK_RATIO(dev_index);
+		set_bit = SET_RATIO(dev_index, div);
 	} else {
 		addr = (unsigned int)&clk->div_fsys2;
 		dev_index -= 2;
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
 	}
 
-	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
-			(div & 0xff) << ((dev_index << 4) + 8));
-}
-
-/* exynos4x12: set the mmc clock */
-static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
-{
-	struct exynos4x12_clock *clk =
-		(struct exynos4x12_clock *)samsung_get_base_clock();
-	unsigned int addr;
-
-	/*
-	 * CLK_DIV_FSYS1
-	 * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
-	 * CLK_DIV_FSYS2
-	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
-	 */
-	if (dev_index < 2) {
-		addr = (unsigned int)&clk->div_fsys1;
-	} else {
-		addr = (unsigned int)&clk->div_fsys2;
-		dev_index -= 2;
-	}
-
-	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
-			(div & 0xff) << ((dev_index << 4) + 8));
+	clrsetbits_le32(addr, clear_bit, set_bit);
 }
 
 /* exynos5: set the mmc clock */
@@ -1612,10 +1594,7 @@ void set_mmc_clk(int dev_index, unsigned int div)
 		else
 			exynos5_set_mmc_clk(dev_index, div);
 	} else {
-		if (proid_is_exynos4412())
-			exynos4x12_set_mmc_clk(dev_index, div);
-		else
-			exynos4_set_mmc_clk(dev_index, div);
+		exynos4_set_mmc_clk(dev_index, div);
 	}
 }
 
diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c
index cca925e42c..9b6ee69f46 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_common.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_common.c
@@ -162,7 +162,7 @@ void mem_ctrl_init(int reset)
 
 	/* If there are any other memory variant, add their init call below */
 	if (param->mem_type == DDR_MODE_DDR3) {
-		ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
+		ret = ddr3_mem_ctrl_init(mem, reset);
 		if (ret) {
 			/* will hang if failed to init memory control */
 			while (1)
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index 487e6f423f..b86dd2d650 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -6,6 +6,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <common.h>
 #include <config.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -16,7 +17,11 @@
 #include "exynos5_setup.h"
 #include "clock_init.h"
 
-#define TIMEOUT	10000
+#define TIMEOUT_US		10000
+#define NUM_BYTE_LANES		4
+#define DEFAULT_DQS		8
+#define DEFAULT_DQS_X4		(DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \
+				|| (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0)
 
 #ifdef CONFIG_EXYNOS5250
 static void reset_phy_ctrl(void)
@@ -28,8 +33,7 @@ static void reset_phy_ctrl(void)
 	writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
 }
 
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-		       int reset)
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 {
 	unsigned int val;
 	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
@@ -177,7 +181,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy1_ctrl->phy_con1);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while ((readl(&dmc->phystatus) &
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
 			(RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
@@ -221,8 +225,220 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 #endif
 
 #ifdef CONFIG_EXYNOS5420
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-		       int reset)
+/**
+ * RAM address to use in the test.
+ *
+ * We'll use 4 words at this address and 4 at this address + 0x80 (Ares
+ * interleaves channels every 128 bytes).  This will allow us to evaluate all of
+ * the chips in a 1 chip per channel (2GB) system and half the chips in a 2
+ * chip per channel (4GB) system.  We can't test the 2nd chip since we need to
+ * do tests before the 2nd chip is enabled.  Looking at the 2nd chip isn't
+ * critical because the 1st and 2nd chip have very similar timings (they'd
+ * better have similar timings, since there's only a single adjustment that is
+ * shared by both chips).
+ */
+const unsigned int test_addr = CONFIG_SYS_SDRAM_BASE;
+
+/* Test pattern with which RAM will be tested */
+static const unsigned int test_pattern[] = {
+	0x5a5a5a5a,
+	0xa5a5a5a5,
+	0xf0f0f0f0,
+	0x0f0f0f0f,
+};
+
+/**
+ * This function is a test vector for sw read leveling,
+ * it compares the read data with the written data.
+ *
+ * @param ch			DMC channel number
+ * @param byte_lane		which DQS byte offset,
+ *				possible values are 0,1,2,3
+ * @return			TRUE if memory was good, FALSE if not.
+ */
+static bool dmc_valid_window_test_vector(int ch, int byte_lane)
+{
+	unsigned int read_data;
+	unsigned int mask;
+	int i;
+
+	mask = 0xFF << (8 * byte_lane);
+
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++) {
+		read_data = readl(test_addr + i * 4 + ch * 0x80);
+		if ((read_data & mask) != (test_pattern[i] & mask))
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * This function returns current read offset value.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static unsigned int dmc_get_read_offset_value(struct exynos5420_phy_control
+					       *phy_ctrl)
+{
+	return readl(&phy_ctrl->phy_con4);
+}
+
+/**
+ * This function performs resync, so that slave DLL is updated.
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ */
+static void ddr_phy_set_do_resync(struct exynos5420_phy_control *phy_ctrl)
+{
+	setbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+	clrbits_le32(&phy_ctrl->phy_con10, PHY_CON10_CTRL_OFFSETR3);
+}
+
+/**
+ * This function sets read offset value register with 'offset'.
+ *
+ * ...we also call call ddr_phy_set_do_resync().
+ *
+ * @param phy_ctrl	pointer to the current phy controller
+ * @param offset	offset to read DQS
+ */
+static void dmc_set_read_offset_value(struct exynos5420_phy_control *phy_ctrl,
+				      unsigned int offset)
+{
+	writel(offset, &phy_ctrl->phy_con4);
+	ddr_phy_set_do_resync(phy_ctrl);
+}
+
+/**
+ * Convert a 2s complement byte to a byte with a sign bit.
+ *
+ * NOTE: you shouldn't use normal math on the number returned by this function.
+ *   As an example, -10 = 0xf6.  After this function -10 = 0x8a.  If you wanted
+ *   to do math and get the average of 10 and -10 (should be 0):
+ *     0x8a + 0xa = 0x94 (-108)
+ *     0x94 / 2   = 0xca (-54)
+ *   ...and 0xca = sign bit plus 0x4a, or -74
+ *
+ * Also note that you lose the ability to represent -128 since there are two
+ * representations of 0.
+ *
+ * @param b	The byte to convert in two's complement.
+ * @return	The 7-bit value + sign bit.
+ */
+
+unsigned char make_signed_byte(signed char b)
+{
+	if (b < 0)
+		return 0x80 | -b;
+	else
+		return b;
+}
+
+/**
+ * Test various shifts starting at 'start' and going to 'end'.
+ *
+ * For each byte lane, we'll walk through shift starting at 'start' and going
+ * to 'end' (inclusive).  When we are finally able to read the test pattern
+ * we'll store the value in the results array.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param start			the start shift.  -127 to 127
+ * @param end			the end shift.  -127 to 127
+ * @param results		we'll store results for each byte lane.
+ */
+
+void test_shifts(struct exynos5420_phy_control *phy_ctrl, int ch,
+		 int start, int end, int results[NUM_BYTE_LANES])
+{
+	int incr = (start < end) ? 1 : -1;
+	int byte_lane;
+
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int shift;
+
+		dmc_set_read_offset_value(phy_ctrl, DEFAULT_DQS_X4);
+		results[byte_lane] = DEFAULT_DQS;
+
+		for (shift = start; shift != (end + incr); shift += incr) {
+			unsigned int byte_offsetr;
+			unsigned int offsetr;
+
+			byte_offsetr = make_signed_byte(shift);
+
+			offsetr = dmc_get_read_offset_value(phy_ctrl);
+			offsetr &= ~(0xFF << (8 * byte_lane));
+			offsetr |= (byte_offsetr << (8 * byte_lane));
+			dmc_set_read_offset_value(phy_ctrl, offsetr);
+
+			if (dmc_valid_window_test_vector(ch, byte_lane)) {
+				results[byte_lane] = shift;
+				break;
+			}
+		}
+	}
+}
+
+/**
+ * This function performs SW read leveling to compensate DQ-DQS skew at
+ * receiver it first finds the optimal read offset value on each DQS
+ * then applies the value to PHY.
+ *
+ * Read offset value has its min margin and max margin. If read offset
+ * value exceeds its min or max margin, read data will have corruption.
+ * To avoid this we are doing sw read leveling.
+ *
+ * SW read leveling is:
+ * 1> Finding offset value's left_limit and right_limit
+ * 2> and calculate its center value
+ * 3> finally programs that center value to PHY
+ * 4> then PHY gets its optimal offset value.
+ *
+ * @param phy_ctrl		pointer to the current phy controller
+ * @param ch			channel number
+ * @param coarse_lock_val	The coarse lock value read from PHY_CON13.
+ *				(0 - 0x7f)
+ */
+static void software_find_read_offset(struct exynos5420_phy_control *phy_ctrl,
+				      int ch, unsigned int coarse_lock_val)
+{
+	unsigned int offsetr_cent;
+	int byte_lane;
+	int left_limit;
+	int right_limit;
+	int left[NUM_BYTE_LANES];
+	int right[NUM_BYTE_LANES];
+	int i;
+
+	/* Fill the memory with test patterns */
+	for (i = 0; i < ARRAY_SIZE(test_pattern); i++)
+		writel(test_pattern[i], test_addr + i * 4 + ch * 0x80);
+
+	/* Figure out the limits we'll test with; keep -127 < limit < 127 */
+	left_limit = DEFAULT_DQS - coarse_lock_val;
+	right_limit = DEFAULT_DQS + coarse_lock_val;
+	if (right_limit > 127)
+		right_limit = 127;
+
+	/* Fill in the location where reads were OK from left and right */
+	test_shifts(phy_ctrl, ch, left_limit, right_limit, left);
+	test_shifts(phy_ctrl, ch, right_limit, left_limit, right);
+
+	/* Make a final value by taking the center between the left and right */
+	offsetr_cent = 0;
+	for (byte_lane = 0; byte_lane < NUM_BYTE_LANES; byte_lane++) {
+		int temp_center;
+		unsigned int vmwc;
+
+		temp_center = (left[byte_lane] + right[byte_lane]) / 2;
+		vmwc = make_signed_byte(temp_center);
+		offsetr_cent |= vmwc << (8 * byte_lane);
+	}
+	dmc_set_read_offset_value(phy_ctrl, offsetr_cent);
+}
+
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 {
 	struct exynos5420_clock *clk =
 		(struct exynos5420_clock *)samsung_get_base_clock();
@@ -231,7 +447,9 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	struct exynos5420_phy_control *phy0_ctrl, *phy1_ctrl;
 	struct exynos5420_dmc *drex0, *drex1;
 	struct exynos5420_tzasc *tzasc0, *tzasc1;
+	struct exynos5_power *pmu;
 	uint32_t val, n_lock_r, n_lock_w_phy0, n_lock_w_phy1;
+	uint32_t lock0_info, lock1_info;
 	int chip;
 	int i;
 
@@ -244,6 +462,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 	tzasc0 = (struct exynos5420_tzasc *)samsung_get_base_dmc_tzasc();
 	tzasc1 = (struct exynos5420_tzasc *)(samsung_get_base_dmc_tzasc()
 							+ DMC_OFFSET);
+	pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
 
 	/* Enable PAUSE for DREX */
 	setbits_le32(&clk->pause, ENABLE_BIT);
@@ -394,7 +613,41 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		 */
 		dmc_config_mrs(mem, &drex0->directcmd);
 		dmc_config_mrs(mem, &drex1->directcmd);
-	} else {
+	}
+
+	/*
+	 * Get PHY_CON13 from both phys.  Gate CLKM around reading since
+	 * PHY_CON13 is glitchy when CLKM is running.  We're paranoid and
+	 * wait until we get a "fine lock", though a coarse lock is probably
+	 * OK (we only use the coarse numbers below).  We try to gate the
+	 * clock for as short a time as possible in case SDRAM is somehow
+	 * sensitive.  sdelay(10) in the loop is arbitrary to make sure
+	 * there is some time for PHY_CON13 to get updated.  In practice
+	 * no delay appears to be needed.
+	 */
+	val = readl(&clk->gate_bus_cdrex);
+	while (true) {
+		writel(val & ~0x1, &clk->gate_bus_cdrex);
+		lock0_info = readl(&phy0_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock0_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+	while (true) {
+		writel(val & ~0x2, &clk->gate_bus_cdrex);
+		lock1_info = readl(&phy1_ctrl->phy_con13);
+		writel(val, &clk->gate_bus_cdrex);
+
+		if ((lock1_info & CTRL_FINE_LOCKED) == CTRL_FINE_LOCKED)
+			break;
+
+		sdelay(10);
+	}
+
+	if (!reset) {
 		/*
 		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases
 		 * pad retention, CKE goes high. This causes memory contents
@@ -445,15 +698,13 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
 		writel(val, &phy1_ctrl->phy_con1);
 
-		n_lock_r = readl(&phy0_ctrl->phy_con13);
-		n_lock_w_phy0 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_w_phy0 = (lock0_info & CTRL_LOCK_COARSE_MASK) >> 2;
 		n_lock_r = readl(&phy0_ctrl->phy_con12);
 		n_lock_r &= ~CTRL_DLL_ON;
 		n_lock_r |= n_lock_w_phy0;
 		writel(n_lock_r, &phy0_ctrl->phy_con12);
 
-		n_lock_r = readl(&phy1_ctrl->phy_con13);
-		n_lock_w_phy1 = (n_lock_r & CTRL_LOCK_COARSE_MASK) >> 2;
+		n_lock_w_phy1 = (lock1_info & CTRL_LOCK_COARSE_MASK) >> 2;
 		n_lock_r = readl(&phy1_ctrl->phy_con12);
 		n_lock_r &= ~CTRL_DLL_ON;
 		n_lock_r |= n_lock_w_phy1;
@@ -482,7 +733,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(val, &phy1_ctrl->phy_con1);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
@@ -497,7 +748,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);
 
 		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
-		i = TIMEOUT;
+		i = TIMEOUT_US;
 		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
@@ -522,77 +773,6 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 			       &drex1->directcmd);
 		}
 
-		if (mem->read_leveling_enable) {
-			/* Set Read DQ Calibration */
-			val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
-			for (chip = 0; chip < mem->chips_to_configure; chip++) {
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex0->directcmd);
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex1->directcmd);
-			}
-
-			val = readl(&phy0_ctrl->phy_con1);
-			val |= READ_LEVELLING_DDR3;
-			writel(val, &phy0_ctrl->phy_con1);
-			val = readl(&phy1_ctrl->phy_con1);
-			val |= READ_LEVELLING_DDR3;
-			writel(val, &phy1_ctrl->phy_con1);
-
-			val = readl(&phy0_ctrl->phy_con2);
-			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
-			writel(val, &phy0_ctrl->phy_con2);
-			val = readl(&phy1_ctrl->phy_con2);
-			val |= (RDLVL_EN | RDLVL_INCR_ADJ);
-			writel(val, &phy1_ctrl->phy_con2);
-
-			setbits_le32(&drex0->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			i = TIMEOUT;
-			while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO)
-				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
-				/*
-				 * TODO(waihong): Comment on how long this take
-				 * to timeout
-				 */
-				sdelay(100);
-				i--;
-			}
-			if (!i)
-				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
-
-			clrbits_le32(&drex0->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			setbits_le32(&drex1->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-			i = TIMEOUT;
-			while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO)
-				 != RDLVL_COMPLETE_CHO) && (i > 0)) {
-				/*
-				 * TODO(waihong): Comment on how long this take
-				 * to timeout
-				 */
-				sdelay(100);
-				i--;
-			}
-			if (!i)
-				return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
-
-			clrbits_le32(&drex1->rdlvl_config,
-				     CTRL_RDLVL_DATA_ENABLE);
-
-			val = (0x3 << DIRECT_CMD_BANK_SHIFT);
-			for (chip = 0; chip < mem->chips_to_configure; chip++) {
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex0->directcmd);
-				writel(val | (chip << DIRECT_CMD_CHIP_SHIFT),
-				       &drex1->directcmd);
-			}
-
-			update_reset_dll(&drex0->phycontrol0, DDR_MODE_DDR3);
-			update_reset_dll(&drex1->phycontrol0, DDR_MODE_DDR3);
-		}
-
 		/* Common Settings for Leveling */
 		val = PHY_CON12_RESET_VAL;
 		writel((val + n_lock_w_phy0), &phy0_ctrl->phy_con12);
@@ -602,6 +782,27 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
 		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
 	}
 
+	/*
+	 * Do software read leveling
+	 *
+	 * Do this before we turn on auto refresh since the auto refresh can
+	 * be in conflict with the resync operation that's part of setting
+	 * read leveling.
+	 */
+	if (!reset) {
+		/* restore calibrated value after resume */
+		dmc_set_read_offset_value(phy0_ctrl, readl(&pmu->pmu_spare1));
+		dmc_set_read_offset_value(phy1_ctrl, readl(&pmu->pmu_spare2));
+	} else {
+		software_find_read_offset(phy0_ctrl, 0,
+					  CTRL_LOCK_COARSE(lock0_info));
+		software_find_read_offset(phy1_ctrl, 1,
+					  CTRL_LOCK_COARSE(lock1_info));
+		/* save calibrated value to restore after resume */
+		writel(dmc_get_read_offset_value(phy0_ctrl), &pmu->pmu_spare1);
+		writel(dmc_get_read_offset_value(phy1_ctrl), &pmu->pmu_spare2);
+	}
+
 	/* Send PALL command */
 	dmc_config_prech(mem, &drex0->directcmd);
 	dmc_config_prech(mem, &drex1->directcmd);
diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
index 53b0ace6e3..3242093855 100644
--- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h
+++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
@@ -282,8 +282,12 @@
 #define PHY_CON12_VAL		0x10107F50
 #define CTRL_START		(1 << 6)
 #define CTRL_DLL_ON		(1 << 5)
+#define CTRL_LOCK_COARSE_OFFSET	10
+#define CTRL_LOCK_COARSE_MASK	(0x7F << CTRL_LOCK_COARSE_OFFSET)
+#define CTRL_LOCK_COARSE(x)	(((x) & CTRL_LOCK_COARSE_MASK) >> \
+				 CTRL_LOCK_COARSE_OFFSET)
 #define CTRL_FORCE_MASK		(0x7F << 8)
-#define CTRL_LOCK_COARSE_MASK	(0x7F << 10)
+#define CTRL_FINE_LOCKED	0x7
 
 #define CTRL_OFFSETD_RESET_VAL	0x8
 #define CTRL_OFFSETD_VAL	0x7F
@@ -431,10 +435,10 @@
 
 /*
  * Definitions that differ with SoC's.
- * Below is the part defining macros for smdk5250.
- * Else part introduces macros for smdk5420.
+ * Below is the part defining macros for Exynos5250.
+ * Else part introduces macros for Exynos5420.
  */
-#ifndef CONFIG_SMDK5420
+#ifndef CONFIG_EXYNOS5420
 
 /* APLL_CON1 */
 #define APLL_CON1_VAL	(0x00203800)
@@ -890,16 +894,11 @@ enum {
 /*
  * Memory variant specific initialization code for DDR3
  *
- * @param mem		Memory timings for this memory type.
- * @param mem_iv_size	Memory interleaving size is a configurable parameter
- *			which the DMC uses to decide how to split a memory
- *			chunk into smaller chunks to support concurrent
- *			accesses; may vary across boards.
+ * @param mem          Memory timings for this memory type.
  * @param reset         Reset DDR PHY during initialization.
  * @return 0 if ok, SETUP_ERR_... if there is a problem
  */
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
-			int reset);
+int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset);
 
 /* Memory variant specific initialization code for LPDDR3 */
 void lpddr3_mem_ctrl_init(void);
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 11fe5b8d04..83e1dcfc1e 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -39,6 +39,7 @@ enum {
 	DO_CLOCKS	= 1 << 1,
 	DO_MEM_RESET	= 1 << 2,
 	DO_UART		= 1 << 3,
+	DO_POWER	= 1 << 4,
 };
 
 int do_lowlevel_init(void)
@@ -60,9 +61,12 @@ int do_lowlevel_init(void)
 		break;
 	default:
 		/* This is a normal boot (not a wake from sleep) */
-		actions = DO_CLOCKS | DO_MEM_RESET;
+		actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
 	}
 
+	if (actions & DO_POWER)
+		set_ps_hold_ctrl();
+
 	if (actions & DO_CLOCKS) {
 		system_clock_init();
 		mem_ctrl_init(actions & DO_MEM_RESET);
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index ee7c2e5a4b..86a0c75326 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -573,15 +573,26 @@ static void exynos4_i2c_config(int peripheral, int flags)
 static int exynos4_mmc_config(int peripheral, int flags)
 {
 	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
 
 	switch (peripheral) {
 	case PERIPH_ID_SDMMC0:
 		start = EXYNOS4_GPIO_K00;
 		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC2:
 		start = EXYNOS4_GPIO_K20;
 		start_ext = EXYNOS4_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
 		break;
 	default:
 		return -1;
@@ -589,13 +600,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
 	for (i = start; i < (start + 7); i++) {
 		if (i == (start + 2))
 			continue;
-		gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(i,  func);
 		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 		gpio_set_drv(i, S5P_GPIO_DRV_4X);
 	}
+	/* SDMMC2 do not use 8bit mode at exynos4 */
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = start_ext; i < (start_ext + 4); i++) {
-			gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x3));
+			gpio_cfg_pin(i,  ext_func);
 			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
@@ -676,15 +688,26 @@ static void exynos4x12_i2c_config(int peripheral, int flags)
 static int exynos4x12_mmc_config(int peripheral, int flags)
 {
 	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
 
 	switch (peripheral) {
 	case PERIPH_ID_SDMMC0:
 		start = EXYNOS4X12_GPIO_K00;
 		start_ext = EXYNOS4X12_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC2:
 		start = EXYNOS4X12_GPIO_K20;
 		start_ext = EXYNOS4X12_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
 		break;
 	default:
 		return -1;
@@ -692,13 +715,13 @@ static int exynos4x12_mmc_config(int peripheral, int flags)
 	for (i = start; i < (start + 7); i++) {
 		if (i == (start + 2))
 			continue;
-		gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(i,  func);
 		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 		gpio_set_drv(i, S5P_GPIO_DRV_4X);
 	}
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = start_ext; i < (start_ext + 4); i++) {
-			gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x3));
+			gpio_cfg_pin(i,  ext_func);
 			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
@@ -759,10 +782,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
 		break;
 	case PERIPH_ID_SDMMC0:
 	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
 		return exynos4_mmc_config(peripheral, flags);
 	case PERIPH_ID_SDMMC1:
 	case PERIPH_ID_SDMMC3:
-	case PERIPH_ID_SDMMC4:
 		debug("SDMMC device %d not implemented\n", peripheral);
 		return -1;
 	default:
@@ -794,10 +817,10 @@ static int exynos4x12_pinmux_config(int peripheral, int flags)
 		break;
 	case PERIPH_ID_SDMMC0:
 	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
 		return exynos4x12_mmc_config(peripheral, flags);
 	case PERIPH_ID_SDMMC1:
 	case PERIPH_ID_SDMMC3:
-	case PERIPH_ID_SDMMC4:
 		debug("SDMMC device %d not implemented\n", peripheral);
 		return -1;
 	default:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 563abd750f..638ee0b30b 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void)
 			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
 }
 
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
 void set_ps_hold_ctrl(void)
 {
 	if (cpu_is_exynos5())
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
index ade45fd5d3..79166303d1 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -4,8 +4,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#include<common.h>
-#include<config.h>
+#include <common.h>
+#include <config.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/clk.h>
diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile
index b1bd0224ea..c4af252110 100644
--- a/arch/arm/cpu/armv7/keystone/Makefile
+++ b/arch/arm/cpu/armv7/keystone/Makefile
@@ -5,7 +5,6 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
-obj-y	+= aemif.o
 obj-y	+= init.o
 obj-y	+= psc.o
 obj-y	+= clock.o
diff --git a/arch/arm/cpu/armv7/keystone/aemif.c b/arch/arm/cpu/armv7/keystone/aemif.c
deleted file mode 100644
index 9b26886dba..0000000000
--- a/arch/arm/cpu/armv7/keystone/aemif.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Keystone2: Asynchronous EMIF Configuration
- *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/emif_defs.h>
-
-#define AEMIF_CFG_SELECT_STROBE(v)	((v) ? 1 << 31 : 0)
-#define AEMIF_CFG_EXTEND_WAIT(v)	((v) ? 1 << 30 : 0)
-#define AEMIF_CFG_WR_SETUP(v)		(((v) & 0x0f) << 26)
-#define AEMIF_CFG_WR_STROBE(v)		(((v) & 0x3f) << 20)
-#define AEMIF_CFG_WR_HOLD(v)		(((v) & 0x07) << 17)
-#define AEMIF_CFG_RD_SETUP(v)		(((v) & 0x0f) << 13)
-#define AEMIF_CFG_RD_STROBE(v)		(((v) & 0x3f) << 7)
-#define AEMIF_CFG_RD_HOLD(v)		(((v) & 0x07) << 4)
-#define AEMIF_CFG_TURN_AROUND(v)	(((v) & 0x03) << 2)
-#define AEMIF_CFG_WIDTH(v)		(((v) & 0x03) << 0)
-
-#define set_config_field(reg, field, val)			\
-	do {							\
-		if (val != -1) {				\
-			reg &= ~AEMIF_CFG_##field(0xffffffff);	\
-			reg |=	AEMIF_CFG_##field(val);		\
-		}						\
-	} while (0)
-
-void configure_async_emif(int cs, struct async_emif_config *cfg)
-{
-	unsigned long tmp;
-
-	if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
-		tmp = __raw_readl(&davinci_emif_regs->nandfcr);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, &davinci_emif_regs->nandfcr);
-
-	} else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
-		tmp = __raw_readl(&davinci_emif_regs->one_nand_cr);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, &davinci_emif_regs->one_nand_cr);
-	}
-
-	tmp = __raw_readl(&davinci_emif_regs->abncr[cs]);
-
-	set_config_field(tmp, SELECT_STROBE,	cfg->select_strobe);
-	set_config_field(tmp, EXTEND_WAIT,	cfg->extend_wait);
-	set_config_field(tmp, WR_SETUP,		cfg->wr_setup);
-	set_config_field(tmp, WR_STROBE,	cfg->wr_strobe);
-	set_config_field(tmp, WR_HOLD,		cfg->wr_hold);
-	set_config_field(tmp, RD_SETUP,		cfg->rd_setup);
-	set_config_field(tmp, RD_STROBE,	cfg->rd_strobe);
-	set_config_field(tmp, RD_HOLD,		cfg->rd_hold);
-	set_config_field(tmp, TURN_AROUND,	cfg->turn_around);
-	set_config_field(tmp, WIDTH,		cfg->width);
-
-	__raw_writel(tmp, &davinci_emif_regs->abncr[cs]);
-}
-
-void init_async_emif(int num_cs, struct async_emif_config *config)
-{
-	int cs;
-
-	for (cs = 0; cs < num_cs; cs++)
-		configure_async_emif(cs, config + cs);
-}
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015aed6..4df5ae1cae 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <ns16550.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@ int arch_cpu_init(void)
 	share_all_segments(11); /* PCIE */
 #endif
 
+	/*
+	 * just initialise the COM2 port so that TI specific
+	 * UART register PWREMU_MGMT is initialized. Linux UART
+	 * driver doesn't handle this.
+	 */
+	NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
 	return 0;
 }
 
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 5f5132f661..7695e16d36 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -22,6 +22,10 @@ obj-y	+= pipe3-phy.o
 obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
 endif
 
+ifeq ($(CONFIG_SYS_DCACHE_OFF),)
+obj-y	+= omap-cache.o
+endif
+
 ifeq ($(CONFIG_OMAP34XX),)
 obj-y	+= boot-common.o
 obj-y	+= lowlevel_init.o
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index ba97d9ec56..5f50a19801 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -18,13 +18,8 @@
 #include <asm/emif.h>
 #include <asm/omap_common.h>
 #include <linux/compiler.h>
-#include <asm/cache.h>
 #include <asm/system.h>
 
-#define ARMV7_DCACHE_WRITEBACK  0xe
-#define	ARMV7_DOMAIN_CLIENT	1
-#define ARMV7_DOMAIN_MASK	(0x3 << 0)
-
 DECLARE_GLOBAL_DATA_PTR;
 
 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
@@ -263,40 +258,3 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-}
-
-void dram_bank_mmu_setup(int bank)
-{
-	bd_t *bd = gd->bd;
-	int	i;
-
-	u32 start = bd->bi_dram[bank].start >> 20;
-	u32 size = bd->bi_dram[bank].size >> 20;
-	u32 end = start + size;
-
-	debug("%s: bank: %d\n", __func__, bank);
-	for (i = start; i < end; i++)
-		set_section_dcache(i, ARMV7_DCACHE_WRITEBACK);
-
-}
-
-void arm_init_domains(void)
-{
-	u32 reg;
-
-	reg = get_dacr();
-	/*
-	* Set DOMAIN to client access so that all permissions
-	* set in pagetables are validated by the mmu.
-	*/
-	reg &= ~ARMV7_DOMAIN_MASK;
-	reg |= ARMV7_DOMAIN_CLIENT;
-	set_dacr(reg);
-}
-#endif
diff --git a/arch/arm/cpu/armv7/omap-common/mem-common.c b/arch/arm/cpu/armv7/omap-common/mem-common.c
index 944ef840a1..5bc7e1f19b 100644
--- a/arch/arm/cpu/armv7/omap-common/mem-common.c
+++ b/arch/arm/cpu/armv7/omap-common/mem-common.c
@@ -121,7 +121,8 @@ void gpmc_init(void)
 	writel(0x00000008, &gpmc_cfg->sysconfig);
 	writel(0x00000000, &gpmc_cfg->irqstatus);
 	writel(0x00000000, &gpmc_cfg->irqenable);
-	writel(0x00000000, &gpmc_cfg->timeout_control);
+	/* disable timeout, set a safe reset value */
+	writel(0x00001ff0, &gpmc_cfg->timeout_control);
 #ifdef CONFIG_NOR
 	writel(0x00000200, &gpmc_cfg->config);
 #else
@@ -133,5 +134,6 @@ void gpmc_init(void)
 	writel(0, &gpmc_cfg->cs[0].config7);
 	sdelay(1000);
 	/* enable chip-select specific configurations */
-	enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
+	if (base != 0)
+		enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size);
 }
diff --git a/arch/arm/cpu/armv7/omap-common/omap-cache.c b/arch/arm/cpu/armv7/omap-common/omap-cache.c
new file mode 100644
index 0000000000..579bebf93f
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/omap-cache.c
@@ -0,0 +1,56 @@
+/*
+ *
+ * Common functions for OMAP4/5 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Aneesh V	<aneesh@ti.com>
+ *	Steve Sakoman	<steve@sakoman.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/cache.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ARMV7_DCACHE_WRITEBACK  0xe
+#define ARMV7_DOMAIN_CLIENT	1
+#define ARMV7_DOMAIN_MASK	(0x3 << 0)
+
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+
+void dram_bank_mmu_setup(int bank)
+{
+	bd_t *bd = gd->bd;
+	int	i;
+
+	u32 start = bd->bi_dram[bank].start >> 20;
+	u32 size = bd->bi_dram[bank].size >> 20;
+	u32 end = start + size;
+
+	debug("%s: bank: %d\n", __func__, bank);
+	for (i = start; i < end; i++)
+		set_section_dcache(i, ARMV7_DCACHE_WRITEBACK);
+}
+
+void arm_init_domains(void)
+{
+	u32 reg;
+
+	reg = get_dacr();
+	/*
+	* Set DOMAIN to client access so that all permissions
+	* set in pagetables are validated by the mmu.
+	*/
+	reg &= ~ARMV7_DOMAIN_MASK;
+	reg |= ARMV7_DOMAIN_CLIENT;
+	set_dacr(reg);
+}
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 9bb1a1c8f9..667e77ff05 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -147,7 +147,7 @@ void secure_unlock_mem(void)
  *		configure secure registers and exit secure world
  *              general use.
  *****************************************************************************/
-void secureworld_exit()
+void secureworld_exit(void)
 {
 	unsigned long i;
 
@@ -178,7 +178,7 @@ void secureworld_exit()
  * Description: If chip is GP/EMU(special) type, unlock the SRAM for
  *              general use.
  *****************************************************************************/
-void try_unlock_memory()
+void try_unlock_memory(void)
 {
 	int mode;
 	int in_sdram = is_running_in_sdram();
@@ -478,11 +478,3 @@ void omap3_outer_cache_disable(void)
 	omap3_update_aux_cr(0, 0x2);
 }
 #endif /* !CONFIG_SYS_L2CACHE_OFF */
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-}
-#endif /* !CONFIG_SYS_DCACHE_OFF */
diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
index e649409654..1832affa5b 100644
--- a/arch/arm/cpu/armv7/omap3/mem.c
+++ b/arch/arm/cpu/armv7/omap3/mem.c
@@ -21,17 +21,6 @@
 struct gpmc *gpmc_cfg;
 
 #if defined(CONFIG_CMD_NAND)
-#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
-	SMNAND_GPMC_CONFIG1,
-	SMNAND_GPMC_CONFIG2,
-	SMNAND_GPMC_CONFIG3,
-	SMNAND_GPMC_CONFIG4,
-	SMNAND_GPMC_CONFIG5,
-	SMNAND_GPMC_CONFIG6,
-	0,
-};
-#else
 static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG1,
 	M_NAND_GPMC_CONFIG2,
@@ -40,7 +29,6 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG5,
 	M_NAND_GPMC_CONFIG6, 0
 };
-#endif
 #endif /* CONFIG_CMD_NAND */
 
 #if defined(CONFIG_CMD_ONENAND)
diff --git a/arch/arm/cpu/armv7/socfpga/Makefile b/arch/arm/cpu/armv7/socfpga/Makefile
index cbe1d406df..eb33f2c5fb 100644
--- a/arch/arm/cpu/armv7/socfpga/Makefile
+++ b/arch/arm/cpu/armv7/socfpga/Makefile
@@ -9,4 +9,4 @@
 
 obj-y	:= lowlevel_init.o
 obj-y	+= misc.o timer.o reset_manager.o system_manager.o clock_manager.o
-obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
+obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o scan_manager.o
diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c
index 2f1c7160f1..5268f2c708 100644
--- a/arch/arm/cpu/armv7/socfpga/misc.c
+++ b/arch/arm/cpu/armv7/socfpga/misc.c
@@ -14,3 +14,27 @@ int dram_init(void)
 	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
 	return 0;
 }
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+	puts("CPU   : Altera SOCFPGA Platform\n");
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
+defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/socfpga/scan_manager.c b/arch/arm/cpu/armv7/socfpga/scan_manager.c
new file mode 100644
index 0000000000..a820b1b1bf
--- /dev/null
+++ b/arch/arm/cpu/armv7/socfpga/scan_manager.c
@@ -0,0 +1,209 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/scan_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_scan_manager *scan_manager_base =
+		(void *)(SOCFPGA_SCANMGR_ADDRESS);
+static const struct socfpga_freeze_controller *freeze_controller_base =
+		(void *)(SOCFPGA_SYSMGR_ADDRESS + SYSMGR_FRZCTRL_ADDRESS);
+
+/*
+ * Function to check IO scan chain engine status and wait if the engine is
+ * is active. Poll the IO scan chain engine till maximum iteration reached.
+ */
+static inline uint32_t scan_chain_engine_is_idle(uint32_t max_iter)
+{
+	uint32_t scanmgr_status;
+
+	scanmgr_status = readl(&scan_manager_base->stat);
+
+	/* Poll the engine until the scan engine is inactive */
+	while (SCANMGR_STAT_ACTIVE_GET(scanmgr_status) ||
+	      (SCANMGR_STAT_WFIFOCNT_GET(scanmgr_status) > 0)) {
+		max_iter--;
+		if (max_iter > 0)
+			scanmgr_status = readl(&scan_manager_base->stat);
+		else
+			return 0;
+	}
+	return 1;
+}
+
+/* Program HPS IO Scan Chain */
+uint32_t scan_mgr_io_scan_chain_prg(
+	uint32_t io_scan_chain_id,
+	uint32_t io_scan_chain_len_in_bits,
+	const uint32_t *iocsr_scan_chain)
+{
+	uint16_t tdi_tdo_header;
+	uint32_t io_program_iter;
+	uint32_t io_scan_chain_data_residual;
+	uint32_t residual;
+	uint32_t i;
+	uint32_t index = 0;
+
+	/*
+	 * De-assert reinit if the IO scan chain is intended for HIO. In
+	 * this, its the chain 3.
+	 */
+	if (io_scan_chain_id == 3)
+		clrbits_le32(&freeze_controller_base->hioctrl,
+			     SYSMGR_FRZCTRL_HIOCTRL_DLLRST_MASK);
+
+	/*
+	 * Check if the scan chain engine is inactive and the
+	 * WFIFO is empty before enabling the IO scan chain
+	 */
+	if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+		return 1;
+
+	/*
+	 * Enable IO Scan chain based on scan chain id
+	 * Note: only one chain can be enabled at a time
+	 */
+	setbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+
+	/*
+	 * Calculate number of iteration needed for full 128-bit (4 x32-bits)
+	 * bits shifting. Each TDI_TDO packet can shift in maximum 128-bits
+	 */
+	io_program_iter	= io_scan_chain_len_in_bits >>
+		IO_SCAN_CHAIN_128BIT_SHIFT;
+	io_scan_chain_data_residual = io_scan_chain_len_in_bits &
+		IO_SCAN_CHAIN_128BIT_MASK;
+
+	/* Construct TDI_TDO packet for 128-bit IO scan chain (2 bytes) */
+	tdi_tdo_header = TDI_TDO_HEADER_FIRST_BYTE |
+		(TDI_TDO_MAX_PAYLOAD <<	TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+	/* Program IO scan chain in 128-bit iteration */
+	for (i = 0; i < io_program_iter; i++) {
+		/* write TDI_TDO packet header to scan manager */
+		writel(tdi_tdo_header,	&scan_manager_base->fifo_double_byte);
+
+		/* calculate array index. Multiply by 4 as write 4 x 32bits */
+		index = i * 4;
+
+		/* write 4 successive 32-bit IO scan chain data into WFIFO */
+		writel(iocsr_scan_chain[index],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 1],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 2],
+		       &scan_manager_base->fifo_quad_byte);
+		writel(iocsr_scan_chain[index + 3],
+		       &scan_manager_base->fifo_quad_byte);
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+			goto error;
+	}
+
+	/* Calculate array index for final TDI_TDO packet */
+	index = io_program_iter * 4;
+
+	/* Final TDI_TDO packet if any */
+	if (io_scan_chain_data_residual) {
+		/*
+		 * Calculate number of quad bytes FIFO write
+		 * needed for the final TDI_TDO packet
+		 */
+		io_program_iter	= io_scan_chain_data_residual >>
+			IO_SCAN_CHAIN_32BIT_SHIFT;
+
+		/*
+		 * Construct TDI_TDO packet for remaining IO
+		 * scan chain (2 bytes)
+		 */
+		tdi_tdo_header	= TDI_TDO_HEADER_FIRST_BYTE |
+			((io_scan_chain_data_residual - 1) <<
+			TDI_TDO_HEADER_SECOND_BYTE_SHIFT);
+
+		/*
+		 * Program the last part of IO scan chain write TDI_TDO packet
+		 * header (2 bytes) to scan manager
+		 */
+		writel(tdi_tdo_header, &scan_manager_base->fifo_double_byte);
+
+		for (i = 0; i < io_program_iter; i++) {
+			/*
+			 * write remaining scan chain data into scan
+			 * manager WFIFO with 4 bytes write
+			*/
+			writel(iocsr_scan_chain[index + i],
+			       &scan_manager_base->fifo_quad_byte);
+		}
+
+		index += io_program_iter;
+		residual = io_scan_chain_data_residual &
+			IO_SCAN_CHAIN_32BIT_MASK;
+
+		if (IO_SCAN_CHAIN_PAYLOAD_24BIT < residual) {
+			/*
+			 * write the last 4B scan chain data
+			 * into scan manager WFIFO
+			 */
+			writel(iocsr_scan_chain[index],
+			       &scan_manager_base->fifo_quad_byte);
+		} else {
+			/*
+			 * write the remaining 1 - 3 bytes scan chain
+			 * data into scan manager WFIFO byte by byte
+			 * to prevent JTAG engine shifting unused data
+			 * from the FIFO and mistaken the data as a
+			 * valid command (even though unused bits are
+			 * set to 0, but just to prevent hardware
+			 * glitch)
+			 */
+			for (i = 0; i < residual; i += 8) {
+				writel(((iocsr_scan_chain[index] >> i)
+					& IO_SCAN_CHAIN_BYTE_MASK),
+					&scan_manager_base->fifo_single_byte);
+			}
+		}
+
+		/*
+		 * Check if the scan chain engine has completed the
+		 * IO scan chain data shifting
+		 */
+		if (!scan_chain_engine_is_idle(SCAN_MAX_DELAY))
+			goto error;
+	}
+
+	/* Disable IO Scan chain when configuration done*/
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return 0;
+
+error:
+	/* Disable IO Scan chain when error detected */
+	clrbits_le32(&scan_manager_base->en, 1 << io_scan_chain_id);
+	return 1;
+}
+
+int scan_mgr_configure_iocsr(void)
+{
+	int status = 0;
+
+	/* configure the IOCSR through scan chain */
+	status |= scan_mgr_io_scan_chain_prg(0,
+		CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH, iocsr_scan_chain0_table);
+	status |= scan_mgr_io_scan_chain_prg(1,
+		CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH, iocsr_scan_chain1_table);
+	status |= scan_mgr_io_scan_chain_prg(2,
+		CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH, iocsr_scan_chain2_table);
+	status |= scan_mgr_io_scan_chain_prg(3,
+		CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH, iocsr_scan_chain3_table);
+	return status;
+}
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 2ae88bbd04..4bed19d0a7 100644
--- a/arch/arm/cpu/armv7/socfpga/spl.c
+++ b/arch/arm/cpu/armv7/socfpga/spl.c
@@ -121,6 +121,10 @@ void spl_board_init(void)
 	/* reconfigure the PLLs */
 	cm_basic_init(&cm_default_cfg);
 
+	/* configure the IOCSR / IO buffer settings */
+	if (scan_mgr_configure_iocsr())
+		hang();
+
 	/* configure the pin muxing through system manager */
 	sysmgr_pinmux_init();
 #endif /* CONFIG_SOCFPGA_VIRTUAL_TARGET */
diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c
index 488f0c639d..fd77f3f0ef 100644
--- a/arch/arm/cpu/armv7/tegra20/display.c
+++ b/arch/arm/cpu/armv7/tegra20/display.c
@@ -328,7 +328,7 @@ static int tegra_display_decode_config(const void *blob,
 	rgb = fdt_subnode_offset(blob, node, "rgb");
 
 	config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel");
-	if (!config->panel_node < 0) {
+	if (config->panel_node < 0) {
 		debug("%s: Cannot find panel information\n", __func__);
 		return -1;
 	}
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index 69500a64e2..4dc9bb0102 100644
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
 	.text :
 	{
 		*(.__image_copy_start)
+		*(.vectors)
 		CPUDIR/start.o (.text*)
 		*(.text*)
 	}
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index a96ecda7e3..9dbcdf22af 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -12,15 +12,14 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifndef CONFIG_SYS_DCACHE_OFF
-
-static void set_pgtable_section(u64 section, u64 memory_type)
+void set_pgtable_section(u64 *page_table, u64 index, u64 section,
+			 u64 memory_type)
 {
-	u64 *page_table = (u64 *)gd->arch.tlb_addr;
 	u64 value;
 
-	value = (section << SECTION_SHIFT) | PMD_TYPE_SECT | PMD_SECT_AF;
+	value = section | PMD_TYPE_SECT | PMD_SECT_AF;
 	value |= PMD_ATTRINDX(memory_type);
-	page_table[section] = value;
+	page_table[index] = value;
 }
 
 /* to activate the MMU we need to set up virtual memory */
@@ -28,10 +27,13 @@ static void mmu_setup(void)
 {
 	int i, j, el;
 	bd_t *bd = gd->bd;
+	u64 *page_table = (u64 *)gd->arch.tlb_addr;
 
 	/* Setup an identity-mapping for all spaces */
-	for (i = 0; i < (PGTABLE_SIZE >> 3); i++)
-		set_pgtable_section(i, MT_DEVICE_NGNRNE);
+	for (i = 0; i < (PGTABLE_SIZE >> 3); i++) {
+		set_pgtable_section(page_table, i, i << SECTION_SHIFT,
+				    MT_DEVICE_NGNRNE);
+	}
 
 	/* Setup an identity-mapping for all RAM space */
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
@@ -39,38 +41,26 @@ static void mmu_setup(void)
 		ulong end = bd->bi_dram[i].start + bd->bi_dram[i].size;
 		for (j = start >> SECTION_SHIFT;
 		     j < end >> SECTION_SHIFT; j++) {
-			set_pgtable_section(j, MT_NORMAL);
+			set_pgtable_section(page_table, j, j << SECTION_SHIFT,
+					    MT_NORMAL);
 		}
 	}
 
 	/* load TTBR0 */
 	el = current_el();
 	if (el == 1) {
-		asm volatile("msr ttbr0_el1, %0"
-			     : : "r" (gd->arch.tlb_addr) : "memory");
-		asm volatile("msr tcr_el1, %0"
-			     : : "r" (TCR_FLAGS | TCR_EL1_IPS_BITS)
-			     : "memory");
-		asm volatile("msr mair_el1, %0"
-			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+		set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+				  TCR_FLAGS | TCR_EL1_IPS_BITS,
+				  MEMORY_ATTRIBUTES);
 	} else if (el == 2) {
-		asm volatile("msr ttbr0_el2, %0"
-			     : : "r" (gd->arch.tlb_addr) : "memory");
-		asm volatile("msr tcr_el2, %0"
-			     : : "r" (TCR_FLAGS | TCR_EL2_IPS_BITS)
-			     : "memory");
-		asm volatile("msr mair_el2, %0"
-			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+		set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+				  TCR_FLAGS | TCR_EL2_IPS_BITS,
+				  MEMORY_ATTRIBUTES);
 	} else {
-		asm volatile("msr ttbr0_el3, %0"
-			     : : "r" (gd->arch.tlb_addr) : "memory");
-		asm volatile("msr tcr_el3, %0"
-			     : : "r" (TCR_FLAGS | TCR_EL2_IPS_BITS)
-			     : "memory");
-		asm volatile("msr mair_el3, %0"
-			     : : "r" (MEMORY_ATTRIBUTES) : "memory");
+		set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
+				  TCR_FLAGS | TCR_EL3_IPS_BITS,
+				  MEMORY_ATTRIBUTES);
 	}
-
 	/* enable the mmu */
 	set_sctlr(get_sctlr() | CR_M);
 }
@@ -83,12 +73,17 @@ void invalidate_dcache_all(void)
 	__asm_invalidate_dcache_all();
 }
 
+void __weak flush_l3_cache(void)
+{
+}
+
 /*
  * Performs a clean & invalidation of the entire data cache at all levels
  */
 void flush_dcache_all(void)
 {
 	__asm_flush_dcache_all();
+	flush_l3_cache();
 }
 
 /*
@@ -221,7 +216,7 @@ void invalidate_icache_all(void)
  * Enable dCache & iCache, whether cache is actually enabled
  * depend on CONFIG_SYS_DCACHE_OFF and CONFIG_SYS_ICACHE_OFF
  */
-void enable_caches(void)
+void __weak enable_caches(void)
 {
 	icache_enable();
 	dcache_enable();
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/Makefile b/arch/arm/cpu/armv8/fsl-lsch3/Makefile
new file mode 100644
index 0000000000..9249537c65
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright 2014, Freescale Semiconductor
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += lowlevel.o
+obj-y += speed.o
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README
new file mode 100644
index 0000000000..cc47466112
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -0,0 +1,10 @@
+#
+# Copyright 2014 Freescale Semiconductor
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+Freescale LayerScape with Chassis Generation 3
+
+This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
+for example LS2085A.
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
new file mode 100644
index 0000000000..c129d032f4
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
@@ -0,0 +1,436 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include "cpu.h"
+#include "speed.h"
+#include <fsl_mc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+/*
+ * To start MMU before DDR is available, we create MMU table in SRAM.
+ * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
+ * levels of translation tables here to cover 40-bit address space.
+ * We use 4KB granule size, with 40 bits physical address, T0SZ=24
+ * Level 0 IA[39], table address @0
+ * Level 1 IA[31:30], table address @01000, 0x2000
+ * Level 2 IA[29:21], table address @0x3000
+ */
+
+#define SECTION_SHIFT_L0	39UL
+#define SECTION_SHIFT_L1	30UL
+#define SECTION_SHIFT_L2	21UL
+#define BLOCK_SIZE_L0		0x8000000000UL
+#define BLOCK_SIZE_L1		(1 << SECTION_SHIFT_L1)
+#define BLOCK_SIZE_L2		(1 << SECTION_SHIFT_L2)
+#define CONFIG_SYS_IFC_BASE	0x30000000
+#define CONFIG_SYS_IFC_SIZE	0x10000000
+#define CONFIG_SYS_IFC_BASE2	0x500000000
+#define CONFIG_SYS_IFC_SIZE2	0x100000000
+#define TCR_EL2_PS_40BIT	(2 << 16)
+#define LSCH3_VA_BITS		(40)
+#define LSCH3_TCR	(TCR_TG0_4K		| \
+			TCR_EL2_PS_40BIT	| \
+			TCR_SHARED_NON		| \
+			TCR_ORGN_NC		| \
+			TCR_IRGN_NC		| \
+			TCR_T0SZ(LSCH3_VA_BITS))
+
+/*
+ * Final MMU
+ * Let's start from the same layout as early MMU and modify as needed.
+ * IFC regions will be cache-inhibit.
+ */
+#define FINAL_QBMAN_CACHED_MEM	0x818000000UL
+#define FINAL_QBMAN_CACHED_SIZE	0x4000000
+
+
+static inline void early_mmu_setup(void)
+{
+	int el;
+	u64 i;
+	u64 section_l1t0, section_l1t1, section_l2;
+	u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
+	u64 *level1_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
+	u64 *level1_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
+	u64 *level2_table = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
+
+
+	level0_table[0] =
+		(u64)level1_table_0 | PMD_TYPE_TABLE;
+	level0_table[1] =
+		(u64)level1_table_1 | PMD_TYPE_TABLE;
+
+	/*
+	 * set level 1 table 0 to cache_inhibit, covering 0 to 512GB
+	 * set level 1 table 1 to cache enabled, covering 512GB to 1TB
+	 * set level 2 table to cache-inhibit, covering 0 to 1GB
+	 */
+	section_l1t0 = 0;
+	section_l1t1 = BLOCK_SIZE_L0;
+	section_l2 = 0;
+	for (i = 0; i < 512; i++) {
+		set_pgtable_section(level1_table_0, i, section_l1t0,
+				    MT_DEVICE_NGNRNE);
+		set_pgtable_section(level1_table_1, i, section_l1t1,
+				    MT_NORMAL);
+		set_pgtable_section(level2_table, i, section_l2,
+				    MT_DEVICE_NGNRNE);
+		section_l1t0 += BLOCK_SIZE_L1;
+		section_l1t1 += BLOCK_SIZE_L1;
+		section_l2 += BLOCK_SIZE_L2;
+	}
+
+	level1_table_0[0] =
+		(u64)level2_table | PMD_TYPE_TABLE;
+	level1_table_0[1] =
+		0x40000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+		PMD_ATTRINDX(MT_DEVICE_NGNRNE);
+	level1_table_0[2] =
+		0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+		PMD_ATTRINDX(MT_NORMAL);
+	level1_table_0[3] =
+		0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+		PMD_ATTRINDX(MT_NORMAL);
+
+	/* Rewrite table to enable cache */
+	set_pgtable_section(level2_table,
+			    CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
+			    CONFIG_SYS_FSL_OCRAM_BASE,
+			    MT_NORMAL);
+	for (i = CONFIG_SYS_IFC_BASE >> SECTION_SHIFT_L2;
+	     i < (CONFIG_SYS_IFC_BASE + CONFIG_SYS_IFC_SIZE)
+	     >> SECTION_SHIFT_L2; i++) {
+		section_l2 = i << SECTION_SHIFT_L2;
+		set_pgtable_section(level2_table, i,
+				    section_l2, MT_NORMAL);
+	}
+
+	el = current_el();
+	set_ttbr_tcr_mair(el, (u64)level0_table, LSCH3_TCR, MEMORY_ATTRIBUTES);
+	set_sctlr(get_sctlr() | CR_M);
+}
+
+/*
+ * This final tale looks similar to early table, but different in detail.
+ * These tables are in regular memory. Cache on IFC is disabled. One sub table
+ * is added to enable cache for QBMan.
+ */
+static inline void final_mmu_setup(void)
+{
+	int el;
+	u64 i, tbl_base, tbl_limit, section_base;
+	u64 section_l1t0, section_l1t1, section_l2;
+	u64 *level0_table = (u64 *)gd->arch.tlb_addr;
+	u64 *level1_table_0 = (u64 *)(gd->arch.tlb_addr + 0x1000);
+	u64 *level1_table_1 = (u64 *)(gd->arch.tlb_addr + 0x2000);
+	u64 *level2_table_0 = (u64 *)(gd->arch.tlb_addr + 0x3000);
+	u64 *level2_table_1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
+
+
+	level0_table[0] =
+		(u64)level1_table_0 | PMD_TYPE_TABLE;
+	level0_table[1] =
+		(u64)level1_table_1 | PMD_TYPE_TABLE;
+
+	/*
+	 * set level 1 table 0 to cache_inhibit, covering 0 to 512GB
+	 * set level 1 table 1 to cache enabled, covering 512GB to 1TB
+	 * set level 2 table 0 to cache-inhibit, covering 0 to 1GB
+	 */
+	section_l1t0 = 0;
+	section_l1t1 = BLOCK_SIZE_L0;
+	section_l2 = 0;
+	for (i = 0; i < 512; i++) {
+		set_pgtable_section(level1_table_0, i, section_l1t0,
+				    MT_DEVICE_NGNRNE);
+		set_pgtable_section(level1_table_1, i, section_l1t1,
+				    MT_NORMAL);
+		set_pgtable_section(level2_table_0, i, section_l2,
+				    MT_DEVICE_NGNRNE);
+		section_l1t0 += BLOCK_SIZE_L1;
+		section_l1t1 += BLOCK_SIZE_L1;
+		section_l2 += BLOCK_SIZE_L2;
+	}
+
+	level1_table_0[0] =
+		(u64)level2_table_0 | PMD_TYPE_TABLE;
+	level1_table_0[2] =
+		0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+		PMD_ATTRINDX(MT_NORMAL);
+	level1_table_0[3] =
+		0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+		PMD_ATTRINDX(MT_NORMAL);
+
+	/* Rewrite table to enable cache */
+	set_pgtable_section(level2_table_0,
+			    CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
+			    CONFIG_SYS_FSL_OCRAM_BASE,
+			    MT_NORMAL);
+
+	/*
+	 * Fill in other part of tables if cache is needed
+	 * If finer granularity than 1GB is needed, sub table
+	 * should be created.
+	 */
+	section_base = FINAL_QBMAN_CACHED_MEM & ~(BLOCK_SIZE_L1 - 1);
+	i = section_base >> SECTION_SHIFT_L1;
+	level1_table_0[i] = (u64)level2_table_1 | PMD_TYPE_TABLE;
+	section_l2 = section_base;
+	for (i = 0; i < 512; i++) {
+		set_pgtable_section(level2_table_1, i, section_l2,
+				    MT_DEVICE_NGNRNE);
+		section_l2 += BLOCK_SIZE_L2;
+	}
+	tbl_base = FINAL_QBMAN_CACHED_MEM & (BLOCK_SIZE_L1 - 1);
+	tbl_limit = (FINAL_QBMAN_CACHED_MEM + FINAL_QBMAN_CACHED_SIZE) &
+		    (BLOCK_SIZE_L1 - 1);
+	for (i = tbl_base >> SECTION_SHIFT_L2;
+	     i < tbl_limit >> SECTION_SHIFT_L2; i++) {
+		section_l2 = section_base + (i << SECTION_SHIFT_L2);
+		set_pgtable_section(level2_table_1, i,
+				    section_l2, MT_NORMAL);
+	}
+
+	/* flush new MMU table */
+	flush_dcache_range(gd->arch.tlb_addr,
+			   gd->arch.tlb_addr +  gd->arch.tlb_size);
+
+	/* point TTBR to the new table */
+	el = current_el();
+	asm volatile("dsb sy");
+	if (el == 1) {
+		asm volatile("msr ttbr0_el1, %0"
+			     : : "r" ((u64)level0_table) : "memory");
+	} else if (el == 2) {
+		asm volatile("msr ttbr0_el2, %0"
+			     : : "r" ((u64)level0_table) : "memory");
+	} else if (el == 3) {
+		asm volatile("msr ttbr0_el3, %0"
+			     : : "r" ((u64)level0_table) : "memory");
+	} else {
+		hang();
+	}
+	asm volatile("isb");
+
+	/*
+	 * MMU is already enabled, just need to invalidate TLB to load the
+	 * new table. The new table is compatible with the current table, if
+	 * MMU somehow walks through the new table before invalidation TLB,
+	 * it still works. So we don't need to turn off MMU here.
+	 */
+}
+
+int arch_cpu_init(void)
+{
+	icache_enable();
+	__asm_invalidate_dcache_all();
+	__asm_invalidate_tlb_all();
+	early_mmu_setup();
+	set_sctlr(get_sctlr() | CR_C);
+	return 0;
+}
+
+/*
+ * flush_l3_cache
+ * Dickens L3 cache can be flushed by transitioning from FAM to SFONLY power
+ * state, by writing to HP-F P-state request register.
+ * Fixme: This function should moved to a common file if other SoCs also use
+ * the same Dickens.
+ */
+#define HNF0_PSTATE_REQ 0x04200010
+#define HNF1_PSTATE_REQ 0x04210010
+#define HNF2_PSTATE_REQ 0x04220010
+#define HNF3_PSTATE_REQ 0x04230010
+#define HNF4_PSTATE_REQ 0x04240010
+#define HNF5_PSTATE_REQ 0x04250010
+#define HNF6_PSTATE_REQ 0x04260010
+#define HNF7_PSTATE_REQ 0x04270010
+#define HNFPSTAT_MASK (0xFFFFFFFFFFFFFFFC)
+#define HNFPSTAT_FAM	0x3
+#define HNFPSTAT_SFONLY 0x01
+
+static void hnf_pstate_req(u64 *ptr, u64 state)
+{
+	int timeout = 1000;
+	out_le64(ptr, (in_le64(ptr) & HNFPSTAT_MASK) | (state & 0x3));
+	ptr++;
+	/* checking if the transition is completed */
+	while (timeout > 0) {
+		if (((in_le64(ptr) & 0x0c) >> 2) == (state & 0x3))
+			break;
+		udelay(100);
+		timeout--;
+	}
+}
+
+void flush_l3_cache(void)
+{
+	hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_SFONLY);
+	hnf_pstate_req((u64 *)HNF0_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF1_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF2_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF3_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF4_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF5_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF6_PSTATE_REQ, HNFPSTAT_FAM);
+	hnf_pstate_req((u64 *)HNF7_PSTATE_REQ, HNFPSTAT_FAM);
+}
+
+/*
+ * This function is called from lib/board.c.
+ * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
+ * There is no need to disable d-cache for this operation.
+ */
+void enable_caches(void)
+{
+	final_mmu_setup();
+	__asm_invalidate_tlb_all();
+}
+#endif
+
+static inline u32 initiator_type(u32 cluster, int init_id)
+{
+	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+	u32 type = in_le32(&gur->tp_ityp[idx]);
+
+	if (type & TP_ITYP_AV)
+		return type;
+
+	return 0;
+}
+
+u32 cpu_mask(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster, type, mask = 0;
+
+	do {
+		int j;
+		cluster = in_le32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type) {
+				if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+					mask |= 1 << count;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return mask;
+}
+
+/*
+ * Return the number of cores on this SOC.
+ */
+int cpu_numcores(void)
+{
+	return hweight32(cpu_mask());
+}
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+	struct ccsr_gur __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster;
+
+	do {
+		int j;
+		cluster = in_le32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			if (initiator_type(cluster, j)) {
+				if (count == core)
+					return i;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return -1;      /* cannot identify the cluster */
+}
+
+u32 fsl_qoriq_core_to_type(unsigned int core)
+{
+	struct ccsr_gur __iomem *gur =
+		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster, type;
+
+	do {
+		int j;
+		cluster = in_le32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = initiator_type(cluster, j);
+			if (type) {
+				if (count == core)
+					return type;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return -1;      /* cannot identify the cluster */
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+	struct sys_info sysinfo;
+	char buf[32];
+	unsigned int i, core;
+	u32 type;
+
+	get_sys_info(&sysinfo);
+	puts("Clock Configuration:");
+	for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
+		if (!(i % 3))
+			puts("\n       ");
+		type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
+		printf("CPU%d(%s):%-4s MHz  ", core,
+		       type == TY_ITYP_VER_A7 ? "A7 " :
+		       (type == TY_ITYP_VER_A53 ? "A53" :
+			(type == TY_ITYP_VER_A57 ? "A57" : "   ")),
+		       strmhz(buf, sysinfo.freq_processor[core]));
+	}
+	printf("\n       Bus:      %-4s MHz  ",
+	       strmhz(buf, sysinfo.freq_systembus));
+	printf("DDR:      %-4s MHz", strmhz(buf, sysinfo.freq_ddrbus));
+	puts("\n");
+
+	return 0;
+}
+#endif
+
+int cpu_eth_init(bd_t *bis)
+{
+	int error = 0;
+
+#ifdef CONFIG_FSL_MC_ENET
+	error = mc_init(bis);
+#endif
+	return error;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.h b/arch/arm/cpu/armv8/fsl-lsch3/cpu.h
new file mode 100644
index 0000000000..28544d7c14
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+int fsl_qoriq_core_to_cluster(unsigned int core);
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
new file mode 100644
index 0000000000..ad32b6cd52
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Extracted from armv8/start.S
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+ENTRY(lowlevel_init)
+	mov	x29, lr			/* Save LR */
+
+	/* Set the SMMU page size in the sACR register */
+	ldr	x1, =SMMU_BASE
+	ldr	w0, [x1, #0x10]
+	orr	w0, w0, #1 << 16  /* set sACR.pagesize to indicate 64K page */
+	str	w0, [x1, #0x10]
+
+	/* Initialize GIC Secure Bank Status */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+1:
+#ifdef CONFIG_GICV3
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+	branch_if_master x0, x1, 1f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent salves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All processors will enter EL2 and optionally EL1.
+	 */
+	bl	armv8_switch_to_el2
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	bl	armv8_switch_to_el1
+#endif
+	b	2f
+
+1:
+2:
+	mov	lr, x29			/* Restore LR */
+	ret
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.c b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
new file mode 100644
index 0000000000..dc4a34bce5
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2014, Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Derived from arch/power/cpu/mpc85xx/speed.c
+ */
+
+#include <common.h>
+#include <linux/compiler.h>
+#include <fsl_ifc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/arch-fsl-lsch3/immap_lsch3.h>
+#include <asm/arch/clock.h>
+#include "cpu.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	6
+#endif
+
+
+void get_sys_info(struct sys_info *sys_info)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	u32 ccr;
+#endif
+	struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR),
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR)
+	};
+	struct ccsr_clk_ctrl __iomem *clk_ctrl =
+		(void *)(CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR);
+	unsigned int cpu;
+	const u8 core_cplx_pll[16] = {
+		[0] = 0,	/* CC1 PPL / 1 */
+		[1] = 0,	/* CC1 PPL / 2 */
+		[2] = 0,	/* CC1 PPL / 4 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 1,	/* CC2 PPL / 2 */
+		[6] = 1,	/* CC2 PPL / 4 */
+		[8] = 2,	/* CC3 PPL / 1 */
+		[9] = 2,	/* CC3 PPL / 2 */
+		[10] = 2,	/* CC3 PPL / 4 */
+		[12] = 3,	/* CC4 PPL / 1 */
+		[13] = 3,	/* CC4 PPL / 2 */
+		[14] = 3,	/* CC4 PPL / 4 */
+	};
+
+	const u8 core_cplx_pll_div[16] = {
+		[0] = 1,	/* CC1 PPL / 1 */
+		[1] = 2,	/* CC1 PPL / 2 */
+		[2] = 4,	/* CC1 PPL / 4 */
+		[4] = 1,	/* CC2 PPL / 1 */
+		[5] = 2,	/* CC2 PPL / 2 */
+		[6] = 4,	/* CC2 PPL / 4 */
+		[8] = 1,	/* CC3 PPL / 1 */
+		[9] = 2,	/* CC3 PPL / 2 */
+		[10] = 4,	/* CC3 PPL / 4 */
+		[12] = 1,	/* CC4 PPL / 1 */
+		[13] = 2,	/* CC4 PPL / 2 */
+		[14] = 4,	/* CC4 PPL / 4 */
+	};
+
+	uint i, cluster;
+	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
+	u32 c_pll_sel, cplx_pll;
+	void *offset;
+
+	sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+	sys_info->freq_ddrbus = sysclk;
+#endif
+
+	sys_info->freq_systembus *= (in_le32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
+			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK;
+	sys_info->freq_ddrbus *= (in_le32(&gur->rcwsr[0]) >>
+			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
+			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+
+	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+		/*
+		 * fixme: prefer to combine the following into one line, but
+		 * cannot pass compiling without warning about in_le32.
+		 */
+		offset = (void *)((size_t)clk_grp[i/3] +
+			 offsetof(struct ccsr_clk_cluster_group,
+				  pllngsr[i%3].gsr));
+		ratio[i] = (in_le32(offset) >> 1) & 0x3f;
+		if (ratio[i] > 4)
+			freq_c_pll[i] = sysclk * ratio[i];
+		else
+			freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+	}
+
+	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+		cluster = fsl_qoriq_core_to_cluster(cpu);
+		c_pll_sel = (in_le32(&clk_ctrl->clkcncsr[cluster].csr) >> 27)
+			    & 0xf;
+		cplx_pll = core_cplx_pll[c_pll_sel];
+		cplx_pll += cc_group[cluster] - 1;
+		sys_info->freq_processor[cpu] =
+			freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+	}
+
+#if defined(CONFIG_FSL_IFC)
+	ccr = in_le32(&ifc_regs->ifc_ccr);
+	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+	sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+#endif
+}
+
+
+int get_clocks(void)
+{
+	struct sys_info sys_info;
+	get_sys_info(&sys_info);
+	gd->cpu_clk = sys_info.freq_processor[0];
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->mem_clk = sys_info.freq_ddrbus;
+
+#if defined(CONFIG_FSL_ESDHC)
+	gd->arch.sdhc_clk = gd->bus_clk / 2;
+#endif /* defined(CONFIG_FSL_ESDHC) */
+
+	if (gd->cpu_clk != 0)
+		return 0;
+	else
+		return 1;
+}
+
+/********************************************
+ * get_bus_freq
+ * return system bus freq in Hz
+ *********************************************/
+ulong get_bus_freq(ulong dummy)
+{
+	if (!gd->bus_clk)
+		get_clocks();
+
+	return gd->bus_clk;
+}
+
+/********************************************
+ * get_ddr_freq
+ * return ddr bus freq in Hz
+ *********************************************/
+ulong get_ddr_freq(ulong dummy)
+{
+	if (!gd->mem_clk)
+		get_clocks();
+
+	return gd->mem_clk;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_I2C_CLK:
+		return get_bus_freq(0) / 2;
+	default:
+		printf("Unsupported clock\n");
+	}
+	return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/speed.h b/arch/arm/cpu/armv8/fsl-lsch3/speed.h
new file mode 100644
index 0000000000..15af5b9f91
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch3/speed.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright 2014, Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+void get_sys_info(struct sys_info *sys_info);
diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S
index e0a5946009..38dea5c518 100644
--- a/arch/arm/cpu/armv8/transition.S
+++ b/arch/arm/cpu/armv8/transition.S
@@ -43,7 +43,7 @@ ENTRY(armv8_switch_to_el1)
 	mrs	x0, cnthctl_el2
 	orr	x0, x0, #0x3		/* Enable EL1 access to timers */
 	msr	cnthctl_el2, x0
-	msr	cntvoff_el2, x0
+	msr	cntvoff_el2, xzr
 	mrs	x0, cntkctl_el1
 	orr	x0, x0, #0x3		/* Enable EL0 access to timers */
 	msr	cntkctl_el1, x0
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
index 7f4debb912..cbb5a529da 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -20,6 +20,43 @@ static void at91_disable_wdt(void)
 	writel(AT91_WDT_MR_WDDIS, &wdt->mr);
 }
 
+static void switch_to_main_crystal_osc(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 tmp;
+
+	tmp = readl(&pmc->mor);
+	tmp &= ~AT91_PMC_MOR_OSCOUNT(0xff);
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_MOSCEN;
+	tmp |= AT91_PMC_MOR_OSCOUNT(8);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCS))
+		;
+
+	tmp = readl(&pmc->mor);
+	tmp &= ~AT91_PMC_MOR_OSCBYPASS;
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+
+	tmp = readl(&pmc->mor);
+	tmp |= AT91_PMC_MOR_MOSCSEL;
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_IXR_MOSCSELS))
+		;
+
+	tmp = readl(&pmc->mor);
+	tmp &= ~AT91_PMC_MOR_MOSCRCEN;
+	tmp &= ~AT91_PMC_MOR_KEY(0xff);
+	tmp |= AT91_PMC_MOR_KEY(0x37);
+	writel(tmp, &pmc->mor);
+}
+
 void at91_plla_init(u32 pllar)
 {
 	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -76,6 +113,8 @@ u32 spl_boot_mode(void)
 
 void s_init(void)
 {
+	switch_to_main_crystal_osc();
+
 	/* disable watchdog */
 	at91_disable_wdt();
 
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 55546152b9..6e2e313829 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -6,7 +6,8 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
 dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-snow.dtb \
 	exynos5250-smdk5250.dtb \
-	exynos5420-smdk5420.dtb
+	exynos5420-smdk5420.dtb \
+	exynos5420-peach-pit.dtb
 dtb-$(CONFIG_MX6) += imx6q-sabreauto.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
@@ -31,6 +32,7 @@ dtb-$(CONFIG_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm012.dtb \
 	zynq-zc770-xm013.dtb
+dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
new file mode 100644
index 0000000000..2f66deda9f
--- /dev/null
+++ b/arch/arm/dts/am335x-bone-common.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout2_pin>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+	};
+
+	ocp {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
+			status = "okay";
+		};
+
+		musb: usb@47400000 {
+			status = "okay";
+
+			control@44e10000 {
+				status = "okay";
+			};
+
+			usb-phy@47401300 {
+				status = "okay";
+			};
+
+			usb-phy@47401b00 {
+				status = "okay";
+			};
+
+			usb@47401000 {
+				status = "okay";
+			};
+
+			usb@47401800 {
+				status = "okay";
+				dr_mode = "host";
+			};
+
+			dma-controller@07402000  {
+				status = "okay";
+			};
+		};
+
+		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
diff --git a/arch/arm/dts/am335x-boneblack.dts b/arch/arm/dts/am335x-boneblack.dts
new file mode 100644
index 0000000000..197cadf72d
--- /dev/null
+++ b/arch/arm/dts/am335x-boneblack.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi
new file mode 100644
index 0000000000..f9c5da9c7f
--- /dev/null
+++ b/arch/arm/dts/am33xx.dtsi
@@ -0,0 +1,649 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		d_can0 = &dcan0;
+		d_can1 = &dcan1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
+	/*
+	 * XXX: Use a flat representation of the AM33XX interconnect.
+	 * The real AM33XX interconnect network is quite complex.Since
+	 * that will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,omap2-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <128>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x44e07000 0x1000>;
+			interrupts = <96>;
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x4804c000 0x1000>;
+			interrupts = <98>;
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x481ac000 0x1000>;
+			interrupts = <32>;
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x481ae000 0x1000>;
+			interrupts = <62>;
+		};
+
+		uart0: serial@44e09000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+			interrupts = <73>;
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+			interrupts = <74>;
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+			interrupts = <44>;
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+			interrupts = <45>;
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+			interrupts = <46>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <91>;
+		};
+
+		dcan0: d_can@481cc000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000
+				0x44e10644 0x4>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: d_can@481d0000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000
+				0x44e10644 0x4>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupts = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupts = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+			status = "disabled";
+
+			ctrl_mod: control@44e10000 {
+				compatible = "ti,am335x-usb-ctrl-module";
+				reg = <0x44e10620 0x10
+					0x44e10648 0x4>;
+				reg-names = "phy_ctrl", "wakeup";
+				status = "disabled";
+			};
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&ctrl_mod>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401400 0x400
+					0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1_phy: usb-phy@47401b00 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401b00 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&ctrl_mod>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@07402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+				status = "disabled";
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+				  0x48300180 0x48300180 0x80   /* EQEP */
+				  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
+				  0x48302180 0x48302180 0x80   /* EQEP */
+				  0x48302200 0x48302200 0x80>; /* EHRPWM */
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
+				  0x48304180 0x48304180 0x80   /* EQEP */
+				  0x48304200 0x48304200 0x80>; /* EHRPWM */
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/*
+			 * c0_rx_thresh_pend
+			 * c0_rx_pend
+			 * c0_tx_pend
+			 * c0_misc_pend
+			 */
+			interrupts = <40 41 42 43>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "ti,am3352-ocmcram";
+			reg = <0x40300000 0x10000>;
+			ti,hwmods = "ocmcram";
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,am3353-wkup-m3";
+			reg = <0x44d00000 0x4000	/* M3 UMEM */
+			       0x44d80000 0x2000>;	/* M3 DMEM */
+			ti,hwmods = "wkup_m3";
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		tscadc: tscadc@44e0d000 {
+			compatible = "ti,am3359-tscadc";
+			reg = <0x44e0d000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+			ti,hwmods = "adc_tsc";
+			status = "disabled";
+
+			tsc {
+				compatible = "ti,am3359-tsc";
+			};
+			am335x_adc: adc {
+				#io-channel-cells = <1>;
+				compatible = "ti,am3359-adc";
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/dts/dt-bindings/gpio/gpio.h b/arch/arm/dts/dt-bindings/gpio/gpio.h
new file mode 100644
index 0000000000..e6b1e0a808
--- /dev/null
+++ b/arch/arm/dts/dt-bindings/gpio/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for most GPIO bindings.
+ *
+ * Most GPIO bindings include a flags cell as part of the GPIO specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_GPIO_H
+#define _DT_BINDINGS_GPIO_GPIO_H
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+#endif
diff --git a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h
new file mode 100644
index 0000000000..2fbc804e1a
--- /dev/null
+++ b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h
@@ -0,0 +1,42 @@
+/*
+ * This header provides constants specific to AM33XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
+#define _DT_BINDINGS_PINCTRL_AM33XX_H
+
+#include <dt-bindings/pinctrl/omap.h>
+
+/* am33xx specific mux bit defines */
+#undef PULL_ENA
+#undef INPUT_EN
+
+#define PULL_DISABLE		(1 << 3)
+#define INPUT_EN		(1 << 5)
+#define SLEWCTRL_FAST		(1 << 6)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+
diff --git a/arch/arm/dts/dt-bindings/pinctrl/omap.h b/arch/arm/dts/dt-bindings/pinctrl/omap.h
new file mode 100644
index 0000000000..edbd250809
--- /dev/null
+++ b/arch/arm/dts/dt-bindings/pinctrl/omap.h
@@ -0,0 +1,55 @@
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
+#define _DT_BINDINGS_PINCTRL_OMAP_H
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define MUX_MODE0	0
+#define MUX_MODE1	1
+#define MUX_MODE2	2
+#define MUX_MODE3	3
+#define MUX_MODE4	4
+#define MUX_MODE5	5
+#define MUX_MODE6	6
+#define MUX_MODE7	7
+
+/* 24xx/34xx mux bit defines */
+#define PULL_ENA		(1 << 3)
+#define PULL_UP			(1 << 4)
+#define ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define INPUT_EN		(1 << 8)
+#define OFF_EN			(1 << 9)
+#define OFFOUT_EN		(1 << 10)
+#define OFFOUT_VAL		(1 << 11)
+#define OFF_PULL_EN		(1 << 12)
+#define OFF_PULL_UP		(1 << 13)
+#define WAKEUP_EN		(1 << 14)
+
+/* 44xx specific mux bit defines */
+#define WAKEUP_EVENT		(1 << 15)
+
+/* Active pin states */
+#define PIN_OUTPUT		0
+#define PIN_OUTPUT_PULLUP	(PIN_OUTPUT | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(PIN_OUTPUT | PULL_ENA)
+#define PIN_INPUT		INPUT_EN
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+/* Off mode states */
+#define PIN_OFF_NONE		0
+#define PIN_OFF_OUTPUT_HIGH	(OFF_EN | OFFOUT_EN | OFFOUT_VAL)
+#define PIN_OFF_OUTPUT_LOW	(OFF_EN | OFFOUT_EN)
+#define PIN_OFF_INPUT_PULLUP	(OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN	(OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_WAKEUPENABLE	WAKEUP_EN
+
+#endif
+
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 71dc7ebf4a..110eb43a2f 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -128,6 +128,14 @@
 		interrupts = <0 78 0>;
 	};
 
+	dwmmc@12550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos-dwmmc";
+		reg = <0x12550000 0x1000>;
+		interrupts = <0 131 0>;
+	};
+
 	gpio: gpio {
 		gpio-controller;
 		#gpio-cells = <2>;
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 1596f8328a..cc58c878b8 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -31,6 +31,7 @@
 		console = "/serial@13820000";
 		mmc0 = "sdhci@12510000";
 		mmc2 = "sdhci@12530000";
+		mmc4 = "dwmmc@12550000";
 	};
 
 	i2c@138d0000 {
@@ -416,6 +417,7 @@
 		samsung,bus-width = <8>;
 		samsung,timing = <1 3 3>;
 		pwr-gpios = <&gpio 0xB2 0>;
+		status = "disabled";
 	};
 
 	sdhci@12520000 {
@@ -431,4 +433,14 @@
 	sdhci@12540000 {
 		status = "disabled";
 	};
+
+	dwmmc@12550000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <2 1 0>;
+		pwr-gpios = <&gpio 0xB2 0>;
+		fifoth_val = <0x203f0040>;
+		bus_hz = <400000000>;
+		div = <0x3>;
+		index = <4>;
+	};
 };
diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
index f8c87411b6..a2b533a136 100644
--- a/arch/arm/dts/exynos5.dtsi
+++ b/arch/arm/dts/exynos5.dtsi
@@ -136,7 +136,7 @@
 	mmc@12200000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "samsung,exynos5250-dwmmc";
+		compatible = "samsung,exynos-dwmmc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
 	};
@@ -144,7 +144,7 @@
 	mmc@12210000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "samsung,exynos5250-dwmmc";
+		compatible = "samsung,exynos-dwmmc";
 		reg = <0x12210000 0x1000>;
 		interrupts = <0 76 0>;
 	};
@@ -152,7 +152,7 @@
 	mmc@12220000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "samsung,exynos5250-dwmmc";
+		compatible = "samsung,exynos-dwmmc";
 		reg = <0x12220000 0x1000>;
 		interrupts = <0 77 0>;
 	};
@@ -160,7 +160,7 @@
 	mmc@12230000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "samsung,exynos5250-dwmmc";
+		compatible = "samsung,exynos-dwmmc";
 		reg = <0x12230000 0x1000>;
 		interrupts = <0 78 0>;
 	};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 9b48a0ccd8..ab4f2f8581 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -44,7 +44,7 @@
 			reg = <0x1e>;
 			compatible = "google,cros-ec";
 			i2c-max-frequency = <100000>;
-			ec-interrupt = <&gpio 782 1>;
+			ec-interrupt = <&gpio 182 1>;
 		};
 
 		power-regulator@48 {
@@ -60,7 +60,7 @@
 			reg = <0>;
 			compatible = "google,cros-ec";
 			spi-max-frequency = <5000000>;
-			ec-interrupt = <&gpio 782 1>;
+			ec-interrupt = <&gpio 182 1>;
 			optimise-flash-write;
 			status = "disabled";
 		};
@@ -80,6 +80,19 @@
 			reg = <0x22>;
 			compatible = "maxim,max98095-codec";
 		};
+
+		ptn3460-bridge@20 {
+			compatible = "nxp,ptn3460";
+			reg = <0x20>;
+			/*
+			 * TODO(sjg@chromium.org): Use GPIOs here
+			 * powerdown-gpio = <&gpy2 5 0>;
+			 * reset-gpio = <&gpx1 5 0>;
+			 * edid-emulation = <5>;
+			 * pinctrl-names = "default";
+			 * pinctrl-0 = <&ptn3460_gpios>;
+			 */
+		};
 	};
 
 	i2c@12c60000 {
@@ -184,4 +197,48 @@
 			/* UP      LEFT    */
 			0x070b0067 0x070c0069>;
 	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <1366>;
+		samsung,vl-row = <768>;
+		samsung,vl-width = <1366>;
+		samsung,vl-height = <768>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-hsp;
+		samsung,vl-vsp;
+
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <5>;
+		samsung,vl-vbpd = <14>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <0>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
 };
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
new file mode 100644
index 0000000000..8d148afb44
--- /dev/null
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -0,0 +1,127 @@
+/*
+ * SAMSUNG/GOOGLE Peach-Pit board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos54xx.dtsi"
+
+/ {
+	model = "Samsung/Google Peach Pit board based on Exynos5420";
+
+	compatible = "google,pit-rev#", "google,pit",
+		"google,peach", "samsung,exynos5420", "samsung,exynos5";
+
+	config {
+		google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+		hwid = "PIT TEST A-A 7848";
+		lazy-init = <1>;
+	};
+
+	aliases {
+		serial0 = "/serial@12C30000";
+		console = "/serial@12C30000";
+		pmic = "/i2c@12ca0000";
+	};
+
+	dmc {
+		mem-manuf = "samsung";
+		mem-type = "ddr3";
+		clock-frequency = <800000000>;
+		arm-frequency = <1700000000>;
+	};
+
+	tmu@10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
+
+	/* MAX77802 is on i2c bus 4 */
+	i2c@12ca0000 {
+		clock-frequency = <400000>;
+		power-regulator@9 {
+			compatible = "maxim,max77802-pmic";
+			reg = <0x9>;
+		};
+	};
+
+	i2c@12cd0000 { /* i2c7 */
+		clock-frequency = <100000>;
+	       soundcodec@20 {
+	              reg = <0x20>;
+	              compatible = "maxim,max98090-codec";
+	       };
+	};
+
+        sound@3830000 {
+                samsung,codec-type = "max98090";
+        };
+
+	i2c@12e10000 { /* i2c9 */
+		clock-frequency = <400000>;
+                tpm@20 {
+                        compatible = "infineon,slb9645-tpm";
+                        reg = <0x20>;
+		};
+	};
+
+	spi@12d30000 { /* spi1 */
+		spi-max-frequency = <50000000>;
+		firmware_storage_spi: flash@0 {
+			reg = <0>;
+
+			/*
+			 * A region for the kernel to store a panic event
+			 * which the firmware will add to the log.
+			*/
+			elog-panic-event-offset = <0x01e00000 0x100000>;
+
+			elog-shrink-size = <0x400>;
+			elog-full-threshold = <0xc00>;
+		};
+	};
+
+	spi@12d40000 { /* spi2 */
+		spi-max-frequency = <4000000>;
+		spi-deactivate-delay = <200>;
+		cros-ec@0 {
+			reg = <0>;
+			compatible = "google,cros-ec";
+			spi-half-duplex;
+			spi-max-timeout-ms = <1100>;
+			spi-frame-header = <0xec>;
+			ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+
+			/*
+			 * This describes the flash memory within the EC. Note
+			 * that the STM32L flash erases to 0, not 0xff.
+			 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			flash@8000000 {
+				reg = <0x08000000 0x20000>;
+				erase-value = <0>;
+			};
+		};
+	};
+
+	xhci@12000000 {
+		samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+	};
+
+	xhci@12400000 {
+		samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+	};
+};
diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
index d73976356d..1bc6256283 100644
--- a/arch/arm/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/dts/exynos5420-smdk5420.dts
@@ -8,7 +8,7 @@
  */
 
 /dts-v1/;
-/include/ "exynos5420.dtsi"
+/include/ "exynos54xx.dtsi"
 
 / {
 	model = "SAMSUNG SMDK5420 board based on EXYNOS5420";
@@ -19,27 +19,6 @@
 	};
 
 	aliases {
-		i2c0 = "/i2c@12c60000";
-		i2c1 = "/i2c@12c70000";
-		i2c2 = "/i2c@12c80000";
-		i2c3 = "/i2c@12c90000";
-		i2c4 = "/i2c@12ca0000";
-		i2c5 = "/i2c@12cb0000";
-		i2c6 = "/i2c@12cc0000";
-		i2c7 = "/i2c@12cd0000";
-		i2c8 = "/i2c@12e00000";
-		i2c9 = "/i2c@12e10000";
-		i2c10 = "/i2c@12e20000";
-		spi0 = "/spi@12d20000";
-		spi1 = "/spi@12d30000";
-		spi2 = "/spi@12d40000";
-		spi3 = "/spi@131a0000";
-		spi4 = "/spi@131b0000";
-		mmc0 = "/mmc@12200000";
-		mmc1 = "/mmc@12210000";
-		mmc2 = "/mmc@12220000";
-		xhci0 = "/xhci@12000000";
-		xhci1 = "/xhci@12400000";
 		serial0 = "/serial@12C30000";
 		console = "/serial@12C30000";
 	};
diff --git a/arch/arm/dts/exynos5420.dtsi b/arch/arm/dts/exynos5420.dtsi
deleted file mode 100644
index 02ead61a49..0000000000
--- a/arch/arm/dts/exynos5420.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2013 SAMSUNG Electronics
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/include/ "exynos5.dtsi"
-
-/ {
-	config {
-		machine-arch-id = <4151>;
-	};
-
-	i2c@12ca0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@12cb0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@12cc0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@12cd0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@12e00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x100>;
-		interrupts = <0 87 0>;
-	};
-
-	i2c@12e10000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x100>;
-		interrupts = <0 88 0>;
-	};
-
-	i2c@12e20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x100>;
-		interrupts = <0 203 0>;
-	};
-};
diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi
new file mode 100644
index 0000000000..b9f8e0bd3d
--- /dev/null
+++ b/arch/arm/dts/exynos54xx.dtsi
@@ -0,0 +1,151 @@
+/*
+ * (C) Copyright 2013 SAMSUNG Electronics
+ * SAMSUNG EXYNOS5420 SoC device tree source
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/include/ "exynos5.dtsi"
+
+/ {
+	config {
+		machine-arch-id = <4151>;
+	};
+
+	aliases {
+		i2c0 = "/i2c@12c60000";
+		i2c1 = "/i2c@12c70000";
+		i2c2 = "/i2c@12c80000";
+		i2c3 = "/i2c@12c90000";
+		i2c4 = "/i2c@12ca0000";
+		i2c5 = "/i2c@12cb0000";
+		i2c6 = "/i2c@12cc0000";
+		i2c7 = "/i2c@12cd0000";
+		i2c8 = "/i2c@12e00000";
+		i2c9 = "/i2c@12e10000";
+		i2c10 = "/i2c@12e20000";
+		spi0 = "/spi@12d20000";
+		spi1 = "/spi@12d30000";
+		spi2 = "/spi@12d40000";
+		spi3 = "/spi@131a0000";
+		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		xhci0 = "/xhci@12000000";
+		xhci1 = "/xhci@12400000";
+	};
+
+	i2c@12ca0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CA0000 0x100>;
+		interrupts = <0 60 0>;
+	};
+
+	i2c@12cb0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CB0000 0x100>;
+		interrupts = <0 61 0>;
+	};
+
+	i2c@12cc0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CC0000 0x100>;
+		interrupts = <0 62 0>;
+	};
+
+	i2c@12cd0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CD0000 0x100>;
+		interrupts = <0 63 0>;
+	};
+
+	i2c@12e00000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E00000 0x100>;
+		interrupts = <0 87 0>;
+	};
+
+	i2c@12e10000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E10000 0x100>;
+		interrupts = <0 88 0>;
+	};
+
+	i2c@12e20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E20000 0x100>;
+		interrupts = <0 203 0>;
+	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		/* sysmmu is not used in U-Boot */
+		samsung,disable-sysmmu;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
+
+	dmc {
+		mem-type = "ddr3";
+	};
+
+	xhci1: xhci@12400000 {
+		compatible = "samsung,exynos5250-xhci";
+		reg = <0x12400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		phy {
+			compatible = "samsung,exynos5250-usb3-phy";
+			reg = <0x12500000 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/dts/include/dt-bindings b/arch/arm/dts/include/dt-bindings
new file mode 120000
index 0000000000..0cecb3d080
--- /dev/null
+++ b/arch/arm/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index f52fcf14dd..59434e0a8f 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -1,3 +1,6 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -46,17 +49,17 @@
 			      0 143 0x04>;
 	};
 
-	gpio: gpio {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
 		reg = <0x6000d000 0x1000>;
-		interrupts = <0 32 0x04
-			      0 33 0x04
-			      0 34 0x04
-			      0 35 0x04
-			      0 55 0x04
-			      0 87 0x04
-			      0 89 0x04
-			      0 125 0x04>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		#interrupt-cells = <2>;
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index 52e8c0e59c..464287e03e 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -17,7 +17,8 @@
 		sdhci1 = "/sdhci@700b0400";
 		spi0 = "/spi@7000d400";
 		spi1 = "/spi@7000da00";
-		usb0 = "/usb@7d008000";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
 	};
 
 	memory {
@@ -77,6 +78,12 @@
 		bus-width = <8>;
 	};
 
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+	};
+
 	usb@7d008000 {
 		status = "okay";
 		nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts
index 2f8d1dcc37..f003413bd7 100644
--- a/arch/arm/dts/tegra124-venice2.dts
+++ b/arch/arm/dts/tegra124-venice2.dts
@@ -17,7 +17,8 @@
 		sdhci1 = "/sdhci@700b0400";
 		spi0 = "/spi@7000d400";
 		spi1 = "/spi@7000da00";
-		usb0 = "/usb@7d008000";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
 	};
 
 	memory {
@@ -77,6 +78,12 @@
 		bus-width = <8>;
 	};
 
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+	};
+
 	usb@7d008000 {
 		status = "okay";
 		nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
index 18a8b24b71..4561c5f839 100644
--- a/arch/arm/dts/tegra124.dtsi
+++ b/arch/arm/dts/tegra124.dtsi
@@ -1,3 +1,6 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -49,14 +52,14 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
 		reg = <0x6000d000 0x1000>;
-		interrupts = <0 32 0x04
-			      0 33 0x04
-			      0 34 0x04
-			      0 35 0x04
-			      0 55 0x04
-			      0 87 0x04
-			      0 89 0x04
-			      0 125 0x04>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		#interrupt-cells = <2>;
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 3805750581..a524f6eed4 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -1,3 +1,6 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -139,10 +142,18 @@
 
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra20-gpio";
-		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 64 65 66 67 87 119 121 >;
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 	};
 
 	pinmux: pinmux@70000000 {
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
index a7cc93e93f..85e62e9db3 100644
--- a/arch/arm/dts/tegra30-beaver.dts
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -14,7 +14,8 @@
 		i2c4 = "/i2c@7000c700";
 		sdhci0 = "/sdhci@78000600";
 		sdhci1 = "/sdhci@78000000";
-		usb0 = "/usb@7d008000";
+		usb0 = "/usb@7d000000";
+		usb1 = "/usb@7d008000";
 	};
 
 	memory {
@@ -70,6 +71,12 @@
 		bus-width = <8>;
 	};
 
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,vbus-gpio = <&gpio 238 0>; /* gpio DD6, PEX_L1_CLKREQ */
+	};
+
 	usb@7d008000 {
 		nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
 		status = "okay";
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index fee1c36efb..7be3791fc9 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -1,3 +1,6 @@
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -47,17 +50,17 @@
 		clocks = <&tegra_car 34>;
 	};
 
-	gpio: gpio {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra30-gpio";
 		reg = <0x6000d000 0x1000>;
-		interrupts = <0 32 0x04
-			      0 33 0x04
-			      0 34 0x04
-			      0 35 0x04
-			      0 55 0x04
-			      0 87 0x04
-			      0 89 0x04
-			      0 125 0x04>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		#interrupt-cells = <2>;
diff --git a/arch/arm/dts/tps65217.dtsi b/arch/arm/dts/tps65217.dtsi
new file mode 100644
index 0000000000..a63272422d
--- /dev/null
+++ b/arch/arm/dts/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index d4799e7d7b..25a9d4ce12 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -34,10 +34,6 @@ $(IMX_CONFIG): %.cfgtmp: % FORCE
 	$(Q)mkdir -p $(dir $@)
 	$(call if_changed_dep,cpp_cfg)
 
-quiet_cmd_mkimage = MKIMAGE $@
-cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
-
 MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $< $(PHONY),$^) -T imximage \
 	-e $(CONFIG_SYS_TEXT_BASE)
 
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index f00fad38fe..4af6b57e42 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -107,6 +107,7 @@ const struct dpll_params *get_dpll_mpu_params(void);
 const struct dpll_params *get_dpll_core_params(void);
 const struct dpll_params *get_dpll_per_params(void);
 const struct dpll_params *get_dpll_ddr_params(void);
+void scale_vcores(void);
 void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *);
 void prcm_init(void);
 void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index d9f0306b0a..8dd69b3c80 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -26,7 +26,17 @@
 #define TCLR_PRE			BIT(5)	/* Pre-scaler enable */
 #define TCLR_PTV_SHIFT			(2)	/* Pre-scaler shift value */
 #define TCLR_PRE_DISABLE		CL_BIT(5) /* Pre-scalar disable */
-
+#define TCLR_CE				BIT(6)	/* compare mode enable */
+#define TCLR_SCPWM			BIT(7)	/* pwm outpin behaviour */
+#define TCLR_TCM			BIT(8)	/* edge detection of input pin*/
+#define TCLR_TRG_SHIFT			(10)	/* trigmode on pwm outpin */
+#define TCLR_PT				BIT(12)	/* pulse/toggle mode of outpin*/
+#define TCLR_CAPTMODE			BIT(13) /* capture mode */
+#define TCLR_GPOCFG			BIT(14)	/* 0=output,1=input */
+
+#define TCFG_RESET			BIT(0)	/* software reset */
+#define TCFG_EMUFREE			BIT(1)	/* behaviour of tmr on debug */
+#define TCFG_IDLEMOD_SHIFT		(2)	/* power management */
 /* device type */
 #define DEVICE_MASK			(BIT(8) | BIT(9) | BIT(10))
 #define TST_DEVICE			0x0
@@ -87,7 +97,8 @@ struct cm_wkuppll {
 	unsigned int wkctrlclkctrl;	/* offset 0x04 */
 	unsigned int wkgpio0clkctrl;	/* offset 0x08 */
 	unsigned int wkl4wkclkctrl;	/* offset 0x0c */
-	unsigned int resv2[4];
+	unsigned int timer0clkctrl;	/* offset 0x10 */
+	unsigned int resv2[3];
 	unsigned int idlestdpllmpu;	/* offset 0x20 */
 	unsigned int resv3[2];
 	unsigned int clkseldpllmpu;	/* offset 0x2c */
@@ -121,7 +132,9 @@ struct cm_wkuppll {
 	unsigned int wkup_uart0ctrl;	/* offset 0xB4 */
 	unsigned int wkup_i2c0ctrl;	/* offset 0xB8 */
 	unsigned int wkup_adctscctrl;	/* offset 0xBC */
-	unsigned int resv12[6];
+	unsigned int resv12;
+	unsigned int timer1clkctrl;	/* offset 0xC4 */
+	unsigned int resv13[4];
 	unsigned int divm6dpllcore;	/* offset 0xD8 */
 };
 
@@ -178,7 +191,9 @@ struct cm_perpll {
 	unsigned int epwmss2clkctrl;	/* offset 0xD8 */
 	unsigned int l3instrclkctrl;	/* offset 0xDC */
 	unsigned int l3clkctrl;		/* Offset 0xE0 */
-	unsigned int resv8[4];
+	unsigned int resv8[2];
+	unsigned int timer5clkctrl;	/* offset 0xEC */
+	unsigned int timer6clkctrl;	/* offset 0xF0 */
 	unsigned int mmc1clkctrl;	/* offset 0xF4 */
 	unsigned int mmc2clkctrl;	/* offset 0xF8 */
 	unsigned int resv9[8];
@@ -191,9 +206,17 @@ struct cm_perpll {
 
 /* Encapsulating Display pll registers */
 struct cm_dpll {
-	unsigned int resv1[2];
+	unsigned int resv1;
+	unsigned int clktimer7clk;	/* offset 0x04 */
 	unsigned int clktimer2clk;	/* offset 0x08 */
-	unsigned int resv2[10];
+	unsigned int clktimer3clk;	/* offset 0x0C */
+	unsigned int clktimer4clk;	/* offset 0x10 */
+	unsigned int resv2;
+	unsigned int clktimer5clk;	/* offset 0x18 */
+	unsigned int clktimer6clk;	/* offset 0x1C */
+	unsigned int resv3[2];
+	unsigned int clktimer1clk;	/* offset 0x28 */
+	unsigned int resv4[2];
 	unsigned int clklcdcpixelclk;	/* offset 0x34 */
 };
 #else
@@ -466,6 +489,12 @@ struct ctrl_stat {
 #define OMAP_GPIO_SETDATAOUT		0x0194
 
 /* Control Device Register */
+
+ /* Control Device Register */
+#define MREQPRIO_0_SAB_INIT1_MASK	0xFFFFFF8F
+#define MREQPRIO_0_SAB_INIT0_MASK	0xFFFFFFF8
+#define MREQPRIO_1_DSS_MASK		0xFFFFFF8F
+
 struct ctrl_dev {
 	unsigned int deviceid;		/* offset 0x00 */
 	unsigned int resv1[7];
@@ -479,10 +508,25 @@ struct ctrl_dev {
 	unsigned int macid1h;		/* offset 0x3c */
 	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
-	unsigned int resv5[106];
+	unsigned int resv5[7];
+	unsigned int mreqprio_0;	/* offset 0x70 */
+	unsigned int mreqprio_1;	/* offset 0x74 */
+	unsigned int resv6[97];
 	unsigned int efuse_sma;		/* offset 0x1FC */
 };
 
+/* Bandwidth Limiter Portion of the L3Fast Configuration Register */
+#define BW_LIMITER_BW_FRAC_MASK         0xFFFFFFE0
+#define BW_LIMITER_BW_INT_MASK          0xFFFFFFF0
+#define BW_LIMITER_BW_WATERMARK_MASK    0xFFFFF800
+
+struct l3f_cfg_bwlimiter {
+	u32 padding0[2];
+	u32 modena_init0_bw_fractional;
+	u32 modena_init0_bw_integer;
+	u32 modena_init0_watermark_0;
+};
+
 /* gmii_sel register defines */
 #define GMII1_SEL_MII		0x0
 #define GMII1_SEL_RMII		0x1
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
index 15399dcc74..efdecf4613 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h
@@ -13,6 +13,9 @@
 
 /* Module base addresses */
 
+/* L3 Fast Configuration Bandwidth Limiter Base Address */
+#define L3F_CFG_BWLIMITER		0x44005200
+
 /* UART Base Address */
 #define UART0_BASE			0x44E09000
 
@@ -40,6 +43,11 @@
 #define VTP0_CTRL_ADDR			0x44E10E0C
 #define VTP1_CTRL_ADDR			0x48140E10
 
+/* USB CTRL Base Address */
+#define USB1_CTRL			0x44e10628
+#define USB1_CTRL_CM_PWRDN		BIT(0)
+#define USB1_CTRL_OTG_PWRDN		BIT(1)
+
 /* DDR Base address */
 #define DDR_PHY_CMD_ADDR		0x44E12000
 #define DDR_PHY_DATA_ADDR		0x44E120C8
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 0855d16ce5..e5c0b0d08f 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -29,6 +29,8 @@
 #define SRAM_SCRATCH_SPACE_ADDR	0x40337C00
 #define AM4372_BOARD_NAME_START	SRAM_SCRATCH_SPACE_ADDR
 #define AM4372_BOARD_NAME_END	SRAM_SCRATCH_SPACE_ADDR + 0xC
+#define AM4372_BOARD_VERSION_START	SRAM_SCRATCH_SPACE_ADDR + 0xD
+#define AM4372_BOARD_VERSION_END	SRAM_SCRATCH_SPACE_ADDR + 0x14
 #define QSPI_BASE              0x47900000
 #endif
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 4535608434..04f6239fd0 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -70,7 +70,10 @@ typedef struct at91_pmc {
 
 #define AT91_PMC_MOR_MOSCEN		0x01
 #define AT91_PMC_MOR_OSCBYPASS		0x02
+#define AT91_PMC_MOR_MOSCRCEN		0x08
 #define AT91_PMC_MOR_OSCOUNT(x)		((x & 0xff) << 8)
+#define AT91_PMC_MOR_KEY(x)		((x & 0xff) << 16)
+#define AT91_PMC_MOR_MOSCSEL		(1 << 24)
 
 #define AT91_PMC_PLLXR_DIV(x)		(x & 0xFF)
 #define AT91_PMC_PLLXR_PLLCOUNT(x)	((x & 0x3F) << 8)
@@ -142,6 +145,7 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_PCKRDY1		0x00000200
 #define AT91_PMC_IXR_PCKRDY2		0x00000400
 #define AT91_PMC_IXR_PCKRDY3		0x00000800
+#define AT91_PMC_IXR_MOSCSELS		0x00010000
 
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index a47103851e..d49c18480d 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -12,6 +12,9 @@
 #ifndef __AT91SAM9X5_H__
 #define __AT91SAM9X5_H__
 
+#define CONFIG_ARM926EJS	/* ARM926EJS Core */
+#define CONFIG_AT91FAMILY	/* it's a member of AT91 family */
+
 /*
  * Peripheral identifiers/interrupts.
  */
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index a63f974060..d712a0dc91 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -25,8 +25,6 @@
 # include <asm/arch/at91sam9x5.h>
 #elif defined(CONFIG_AT91CAP9)
 # include <asm/arch/at91cap9.h>
-#elif defined(CONFIG_AT91X40)
-# include <asm/arch/at91x40.h>
 #elif defined(CONFIG_SAMA5D3)
 # include <asm/arch/sama5d3.h>
 #else
diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h
deleted file mode 100644
index 7e19cfeed4..0000000000
--- a/arch/arm/include/asm/arch-davinci/emif_defs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _EMIF_DEFS_H_
-#define _EMIF_DEFS_H_
-
-#include <asm/arch/hardware.h>
-
-struct davinci_emif_regs {
-	u_int32_t	ercsr;
-	u_int32_t	awccr;
-	u_int32_t	sdbcr;
-	u_int32_t	sdrcr;
-	u_int32_t	ab1cr;
-	u_int32_t	ab2cr;
-	u_int32_t	ab3cr;
-	u_int32_t	ab4cr;
-	u_int32_t	sdtimr;
-	u_int32_t	ddrsr;
-	u_int32_t	ddrphycr;
-	u_int32_t	ddrphysr;
-	u_int32_t	totar;
-	u_int32_t	totactr;
-	u_int32_t	ddrphyid_rev;
-	u_int32_t	sdsretr;
-	u_int32_t	eirr;
-	u_int32_t	eimr;
-	u_int32_t	eimsr;
-	u_int32_t	eimcr;
-	u_int32_t	ioctrlr;
-	u_int32_t	iostatr;
-	u_int8_t	rsvd0[8];
-	u_int32_t	nandfcr;
-	u_int32_t	nandfsr;
-	u_int8_t	rsvd1[8];
-	u_int32_t	nandfecc[4];
-	u_int8_t	rsvd2[60];
-	u_int32_t	nand4biteccload;
-	u_int32_t	nand4bitecc[4];
-	u_int32_t	nanderradd1;
-	u_int32_t	nanderradd2;
-	u_int32_t	nanderrval1;
-	u_int32_t	nanderrval2;
-};
-
-#define davinci_emif_regs \
-	((struct davinci_emif_regs *)DAVINCI_ASYNC_EMIF_CNTRL_BASE)
-
-#define DAVINCI_NANDFCR_NAND_ENABLE(n)			(1 << (n-2))
-#define DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK		(3 << 4)
-#define DAVINCI_NANDFCR_4BIT_ECC_SEL(n)			((n-2) << 4)
-#define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + (n-2)))
-#define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
-#define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
-#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
-
-/* Chip Select setup */
-#define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
-#define DAVINCI_ABCR_EXT_WAIT				(1 << 30)
-#define DAVINCI_ABCR_WSETUP(n)				(n << 26)
-#define DAVINCI_ABCR_WSTROBE(n)				(n << 20)
-#define DAVINCI_ABCR_WHOLD(n)				(n << 17)
-#define DAVINCI_ABCR_RSETUP(n)				(n << 13)
-#define DAVINCI_ABCR_RSTROBE(n)				(n << 7)
-#define DAVINCI_ABCR_RHOLD(n)				(n << 4)
-#define DAVINCI_ABCR_TA(n)				(n << 2)
-#define DAVINCI_ABCR_ASIZE_16BIT			1
-#define DAVINCI_ABCR_ASIZE_8BIT				0
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 98fe56e686..a4eb0bd89b 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -597,7 +597,6 @@ static inline enum davinci_clk_ids get_async3_src(void)
 #if defined(CONFIG_SOC_DM365)
 #include <asm/arch/aintc_defs.h>
 #include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pll_defs.h>
 #include <asm/arch/psc_defs.h>
diff --git a/arch/arm/include/asm/arch-davinci/nand_defs.h b/arch/arm/include/asm/arch-davinci/nand_defs.h
deleted file mode 100644
index dee1c6f814..0000000000
--- a/arch/arm/include/asm/arch-davinci/nand_defs.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts shamelesly stolen from Linux Kernel source tree.
- *
- * ------------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-
-#ifdef CONFIG_SOC_DM646X
-#define	MASK_CLE	0x80000
-#define	MASK_ALE	0x40000
-#else
-#define	MASK_CLE	0x10
-#define	MASK_ALE	0x08
-#endif
-
-#ifdef CONFIG_SYS_NAND_MASK_CLE
-#undef MASK_CLE
-#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
-#endif
-#ifdef CONFIG_SYS_NAND_MASK_ALE
-#undef MASK_ALE
-#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
-#endif
-
-#define NAND_READ_START		0x00
-#define NAND_READ_END		0x30
-#define NAND_STATUS		0x70
-
-extern void davinci_nand_init(struct nand_chip *nand);
-
-#endif
diff --git a/arch/arm/include/asm/arch-ep93xx/ep93xx.h b/arch/arm/include/asm/arch-ep93xx/ep93xx.h
index 9e7f2f3480..330493b606 100644
--- a/arch/arm/include/asm/arch-ep93xx/ep93xx.h
+++ b/arch/arm/include/asm/arch-ep93xx/ep93xx.h
@@ -1,6 +1,9 @@
 /*
  * Cirrus Logic EP93xx register definitions.
  *
+ * Copyright (C) 2013
+ * Sergey Kostanbaev <sergey.kostanbaev <at> fairwaves.ru>
+ *
  * Copyright (C) 2009
  * Matthias Kaehlcke <matthias@kaehlcke.net>
  *
@@ -287,6 +290,20 @@ struct sdram_regs {
 #define SDRAM_DEVCFG_CASLAT_2		0x00010000
 #define SDRAM_DEVCFG_RASTOCAS_2		0x00200000
 
+#define SDRAM_OFF_GLCONFIG		0x0004
+#define SDRAM_OFF_REFRSHTIMR		0x0008
+
+#define SDRAM_OFF_DEVCFG0		0x0010
+#define SDRAM_OFF_DEVCFG1		0x0014
+#define SDRAM_OFF_DEVCFG2		0x0018
+#define SDRAM_OFF_DEVCFG3		0x001C
+
+#define SDRAM_DEVCFG0_BASE		0xC0000000
+#define SDRAM_DEVCFG1_BASE		0xD0000000
+#define SDRAM_DEVCFG2_BASE		0xE0000000
+#define SDRAM_DEVCFG3_ASD0_BASE		0xF0000000
+#define SDRAM_DEVCFG3_ASD1_BASE		0x00000000
+
 #define GLCONFIG_INIT			(1 << 0)
 #define GLCONFIG_MRS			(1 << 1)
 #define GLCONFIG_SMEMBUSY		(1 << 5)
@@ -295,6 +312,43 @@ struct sdram_regs {
 #define GLCONFIG_CLKSHUTDOWN		(1 << 30)
 #define GLCONFIG_CKE			(1 << 31)
 
+#define EP93XX_SDRAMCTRL			0x80060000
+#define EP93XX_SDRAMCTRL_GLOBALCFG_INIT		0x00000001
+#define EP93XX_SDRAMCTRL_GLOBALCFG_MRS		0x00000002
+#define EP93XX_SDRAMCTRL_GLOBALCFG_SMEMBUSY	0x00000020
+#define EP93XX_SDRAMCTRL_GLOBALCFG_LCR		0x00000040
+#define EP93XX_SDRAMCTRL_GLOBALCFG_REARBEN	0x00000080
+#define EP93XX_SDRAMCTRL_GLOBALCFG_CLKSHUTDOWN	0x40000000
+#define EP93XX_SDRAMCTRL_GLOBALCFG_CKE		0x80000000
+
+#define EP93XX_SDRAMCTRL_REFRESH_MASK		0x0000FFFF
+
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_32	0x00000002
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_16	0x00000001
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_8	0x00000000
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_WIDTH_MASK	0x00000003
+#define EP93XX_SDRAMCTRL_BOOTSTATUS_MEDIA	0x00000004
+
+#define EP93XX_SDRAMCTRL_DEVCFG_EXTBUSWIDTH	0x00000004
+#define EP93XX_SDRAMCTRL_DEVCFG_BANKCOUNT	0x00000008
+#define EP93XX_SDRAMCTRL_DEVCFG_SROM512		0x00000010
+#define EP93XX_SDRAMCTRL_DEVCFG_SROMLL		0x00000020
+#define EP93XX_SDRAMCTRL_DEVCFG_2KPAGE		0x00000040
+#define EP93XX_SDRAMCTRL_DEVCFG_SFCONFIGADDR	0x00000080
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_MASK	0x00070000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_2	0x00010000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_3	0x00020000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_4	0x00030000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_5	0x00040000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_6	0x00050000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_7	0x00060000
+#define EP93XX_SDRAMCTRL_DEVCFG_CASLAT_8	0x00070000
+#define EP93XX_SDRAMCTRL_DEVCFG_WBL		0x00080000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_MASK	0x00300000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_2	0x00200000
+#define EP93XX_SDRAMCTRL_DEVCFG_RASTOCAS_3	0x00300000
+#define EP93XX_SDRAMCTRL_DEVCFG_AUTOPRECHARGE	0x01000000
+
 /*
  * 0x80070000 - 0x8007FFFF: Reserved
  */
@@ -324,6 +378,13 @@ struct smc_regs {
 };
 #endif
 
+#define EP93XX_OFF_SMCBCR0		0x00
+#define EP93XX_OFF_SMCBCR1		0x04
+#define EP93XX_OFF_SMCBCR2		0x08
+#define EP93XX_OFF_SMCBCR3		0x0C
+#define EP93XX_OFF_SMCBCR6		0x18
+#define EP93XX_OFF_SMCBCR7		0x1C
+
 #define SMC_BCR_IDCY_SHIFT	0
 #define SMC_BCR_WST1_SHIFT	5
 #define SMC_BCR_BLE		(1 << 10)
@@ -445,6 +506,14 @@ struct gpio_regs {
 };
 #endif
 
+#define EP93XX_LED_DATA		0x80840020
+#define EP93XX_LED_GREEN_ON	0x0001
+#define EP93XX_LED_RED_ON	0x0002
+
+#define EP93XX_LED_DDR		0x80840024
+#define EP93XX_LED_GREEN_ENABLE	0x0001
+#define EP93XX_LED_RED_ENABLE	0x00020000
+
 /*
  * 0x80850000 - 0x8087FFFF: Reserved
  */
@@ -519,6 +588,9 @@ struct gpio_regs {
 #define SYSCON_OFFSET		0x930000
 #define SYSCON_BASE		(EP93XX_APB_BASE | SYSCON_OFFSET)
 
+/* Security */
+#define SECURITY_EXTENSIONID	0x80832714
+
 #ifndef __ASSEMBLY__
 struct syscon_regs {
 	uint32_t pwrsts;
@@ -553,7 +625,11 @@ struct syscon_regs {
 #define SYSCON_SCRATCH0		(SYSCON_BASE + 0x0040)
 #endif
 
+#define SYSCON_OFF_CLKSET1			0x0020
+#define SYSCON_OFF_SYSCFG			0x009c
+
 #define SYSCON_PWRCNT_UART_BAUD			(1 << 29)
+#define SYSCON_PWRCNT_USH_EN			(1 << 28)
 
 #define SYSCON_CLKSET_PLL_X2IPD_SHIFT		0
 #define SYSCON_CLKSET_PLL_X2FBD2_SHIFT		5
@@ -571,6 +647,8 @@ struct syscon_regs {
 #define SYSCON_CHIPID_REV_MASK			0xF0000000
 #define SYSCON_DEVICECFG_SWRST			(1 << 31)
 
+#define SYSCON_SYSCFG_LASDO			0x00000020
+
 /*
  * 0x80930000 - 0x8093FFFF: Watchdog Timer
  */
@@ -580,3 +658,10 @@ struct syscon_regs {
 /*
  * 0x80950000 - 0x9000FFFF: Reserved
  */
+
+/*
+ * During low_level init we store memory layout in memory at specific location
+ */
+#define UBOOT_MEMORYCNF_BANK_SIZE		0x2000
+#define UBOOT_MEMORYCNF_BANK_MASK		0x2004
+#define UBOOT_MEMORYCNF_BANK_COUNT		0x2008
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index cdeef324cc..ffbc07e228 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -16,6 +16,11 @@
 #define BPLL	5
 #define RPLL	6
 
+#define MASK_PRE_RATIO(x)	(0xff << ((x << 4) + 8))
+#define MASK_RATIO(x)		(0xf << (x << 4))
+#define SET_PRE_RATIO(x, y)	((y & 0xff) << ((x << 4) + 8))
+#define SET_RATIO(x, y)		((y & 0xf) << (x << 4))
+
 enum pll_src_bit {
 	EXYNOS_SRC_MPLL = 6,
 	EXYNOS_SRC_EPLL,
diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h
index d78536d2df..ec3f9b6ee1 100644
--- a/arch/arm/include/asm/arch-exynos/dmc.h
+++ b/arch/arm/include/asm/arch-exynos/dmc.h
@@ -467,6 +467,9 @@ enum mem_manuf {
 /* PHY_CON1 register fields */
 #define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT	0
 
+/* PHY_CON4 rgister fields */
+#define PHY_CON10_CTRL_OFFSETR3		(1 << 24)
+
 /* PHY_CON12 register fields */
 #define PHY_CON12_CTRL_START_POINT_SHIFT	24
 #define PHY_CON12_CTRL_INC_SHIFT	16
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index c9609a23f5..4f2447b3f8 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -906,8 +906,8 @@ struct exynos5420_power {
 	unsigned int	sysip_dat3;
 	unsigned char	res11[0xe0];
 	unsigned int	pmu_spare0;
-	unsigned int	pmu_spare1;
-	unsigned int	pmu_spare2;
+	unsigned int	pmu_spare1; /* Store PHY0_CON4 for read leveling */
+	unsigned int	pmu_spare2; /* Store PHY1_CON4 for read leveling */
 	unsigned int	pmu_spare3;
 	unsigned char	res12[0x4];
 	unsigned int	cg_status0;
@@ -1726,4 +1726,5 @@ uint32_t get_reset_status(void);
 
 /* Read the resume function and call it */
 void power_exit_wakeup(void);
+
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/clock.h b/arch/arm/include/asm/arch-fsl-lsch3/clock.h
new file mode 100644
index 0000000000..831af0bda3
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/clock.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LSCH3_CLOCK_H_
+#define __ASM_ARCH_FSL_LSCH3_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_BUS_CLK,
+	MXC_UART_CLK,
+	MXC_ESDHC_CLK,
+	MXC_I2C_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_FSL_LSCH3_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h
new file mode 100644
index 0000000000..c1c718ecd4
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LSCH3_CONFIG_
+#define _ASM_ARMV8_FSL_LSCH3_CONFIG_
+
+#include <fsl_ddrc_version.h>
+
+#define CONFIG_SYS_FSL_OCRAM_BASE	0x18000000	/* initial RAM */
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+
+#define CONFIG_SYS_IMMR				0x01000000
+#define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_FSL_DDR2_ADDR		(CONFIG_SYS_IMMR + 0x00090000)
+#define CONFIG_SYS_FSL_GUTS_ADDR		(CONFIG_SYS_IMMR + 0x00E00000)
+#define CONFIG_SYS_FSL_PMU_ADDR			(CONFIG_SYS_IMMR + 0x00E30000)
+#define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR	(CONFIG_SYS_IMMR + 0x00300000)
+#define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR	(CONFIG_SYS_IMMR + 0x00310000)
+#define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
+#define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
+#define CONFIG_SYS_NS16550_COM1			(CONFIG_SYS_IMMR + 0x011C0500)
+#define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011C0600)
+#define CONFIG_SYS_FSL_TIMER_ADDR		0x023d0000
+#define CONFIG_SYS_FSL_PMU_CLTBENR		(CONFIG_SYS_FSL_PMU_ADDR + \
+						 0x18A0)
+
+#define I2C1_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01000000)
+#define I2C2_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01010000)
+#define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01020000)
+#define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01030000)
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE		0x06000000
+#define GICR_BASE		0x06100000
+
+/* SMMU Defintions */
+#define SMMU_BASE		0x05000000 /* GR0 Base */
+
+/* DDR */
+#define CONFIG_SYS_FSL_DDR_LE
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3	/* Enable Freescale ARM DDR3 driver */
+#define CONFIG_SYS_FSL_DDR		/* Freescale DDR driver */
+#define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_LS2_DDR_BLOCK1_SIZE
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_5_0
+
+
+/* IFC */
+#define CONFIG_SYS_FSL_IFC_LE
+
+#ifdef CONFIG_LS2085A
+#define CONFIG_MAX_CPUS				16
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
+#define CONFIG_NUM_DDR_CONTROLLERS		2
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
+#else
+#error SoC not defined
+#endif
+
+#endif /* _ASM_ARMV8_FSL_LSCH3_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/gpio.h b/arch/arm/include/asm/arch-fsl-lsch3/gpio.h
new file mode 100644
index 0000000000..f23a78c62d
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/gpio.h
@@ -0,0 +1,9 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LSCH3_GPIO_H_
+#define _ASM_ARMV8_FSL_LSCH3_GPIO_H_
+#endif	/* _ASM_ARMV8_FSL_LSCH3_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
new file mode 100644
index 0000000000..18e66bdf41
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h
@@ -0,0 +1,116 @@
+/*
+ * LayerScape Internal Memory Map
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ARCH_FSL_LSCH3_IMMAP_H
+#define __ARCH_FSL_LSCH3_IMMAP_H_
+
+/* This is chassis generation 3 */
+
+struct sys_info {
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+	unsigned long freq_qe;
+#ifdef CONFIG_SYS_DPAA_FMAN
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
+#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	unsigned long freq_qman;
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+	unsigned long freq_pme;
+#endif
+};
+
+/* Global Utilities Block */
+struct ccsr_gur {
+	u32	porsr1;		/* POR status 1 */
+	u32	porsr2;		/* POR status 2 */
+	u8	res_008[0x20-0x8];
+	u32	gpporcr1;	/* General-purpose POR configuration */
+	u32	gpporcr2;	/* General-purpose POR configuration 2 */
+	u32	dcfg_fusesr;	/* Fuse status register */
+	u32	gpporcr3;
+	u32	gpporcr4;
+	u8	res_034[0x70-0x34];
+	u32	devdisr;	/* Device disable control */
+	u32	devdisr2;	/* Device disable control 2 */
+	u32	devdisr3;	/* Device disable control 3 */
+	u32	devdisr4;	/* Device disable control 4 */
+	u32	devdisr5;	/* Device disable control 5 */
+	u32	devdisr6;	/* Device disable control 6 */
+	u32	devdisr7;	/* Device disable control 7 */
+	u8	res_08c[0x90-0x8c];
+	u32	coredisru;	/* uppper portion for support of 64 cores */
+	u32	coredisrl;	/* lower portion for support of 64 cores */
+	u8	res_098[0xa0-0x98];
+	u32	pvr;		/* Processor version */
+	u32	svr;		/* System version */
+	u32	mvr;		/* Manufacturing version */
+	u8	res_0ac[0x100-0xac];
+	u32	rcwsr[32];	/* Reset control word status */
+
+#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT	2
+#define FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_MASK	0x1f
+#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT	10
+#define FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK	0x3f
+	u8	res_180[0x200-0x180];
+	u32	scratchrw[32];	/* Scratch Read/Write */
+	u8	res_280[0x300-0x280];
+	u32	scratchw1r[4];	/* Scratch Read (Write once) */
+	u8	res_310[0x400-0x310];
+	u32	bootlocptrl;	/* Boot location pointer low-order addr */
+	u32	bootlocptrh;	/* Boot location pointer high-order addr */
+	u8	res_408[0x500-0x408];
+	u8	res_500[0x740-0x500];	/* add more registers when needed */
+	u32	tp_ityp[64];	/* Topology Initiator Type Register */
+	struct {
+		u32	upper;
+		u32	lower;
+	} tp_cluster[3];	/* Core Cluster n Topology Register */
+	u8	res_858[0x1000-0x858];
+};
+
+#define TP_ITYP_AV		0x00000001	/* Initiator available */
+#define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
+#define TP_ITYP_TYPE_ARM	0x0
+#define TP_ITYP_TYPE_PPC	0x1		/* PowerPC */
+#define TP_ITYP_TYPE_OTHER	0x2		/* StarCore DSP */
+#define TP_ITYP_TYPE_HA		0x3		/* HW Accelerator */
+#define TP_ITYP_THDS(x)	(((x) & 0x18) >> 3)	/* # threads */
+#define TP_ITYP_VER(x)	(((x) & 0xe0) >> 5)	/* Initiator Version */
+#define TY_ITYP_VER_A7		0x1
+#define TY_ITYP_VER_A53		0x2
+#define TY_ITYP_VER_A57		0x3
+
+#define TP_CLUSTER_EOC		0x80000000	/* end of clusters */
+#define TP_CLUSTER_INIT_MASK	0x0000003f	/* initiator mask */
+#define TP_INIT_PER_CLUSTER     4
+
+struct ccsr_clk_cluster_group {
+	struct {
+		u8	res_00[0x10];
+		u32	csr;
+		u8	res_14[0x20-0x14];
+	} hwncsr[3];
+	u8	res_60[0x80-0x60];
+	struct {
+		u32	gsr;
+		u8	res_84[0xa0-0x84];
+	} pllngsr[3];
+	u8	res_e0[0x100-0xe0];
+};
+
+struct ccsr_clk_ctrl {
+	struct {
+		u32 csr;	/* core cluster n clock control status */
+		u8  res_04[0x20-0x04];
+	} clkcncsr[8];
+};
+#endif /* __ARCH_FSL_LSCH3_IMMAP_H */
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h b/arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h
new file mode 100644
index 0000000000..8f005353b4
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LSCH3_IMX_REGS_H_
+#define __ASM_ARCH_FSL_LSCH3_IMX_REGS_H_
+
+#define I2C_QUIRK_REG	/* enable 8-bit driver */
+
+#endif /* __ASM_ARCH_FSL_LSCH3_IMX_REGS_H_ */
diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
index 50ff13a3b2..50ce649d4c 100644
--- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
+++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h
@@ -9,13 +9,6 @@
 #ifndef __ASM_ARCH_HARDWARE_K2HK_H
 #define __ASM_ARCH_HARDWARE_K2HK_H
 
-#define K2HK_ASYNC_EMIF_CNTRL_BASE      0x21000a00
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE   K2HK_ASYNC_EMIF_CNTRL_BASE
-#define K2HK_ASYNC_EMIF_DATA_CE0_BASE   0x30000000
-#define K2HK_ASYNC_EMIF_DATA_CE1_BASE   0x34000000
-#define K2HK_ASYNC_EMIF_DATA_CE2_BASE   0x38000000
-#define K2HK_ASYNC_EMIF_DATA_CE3_BASE   0x3c000000
-
 #define K2HK_PLL_CNTRL_BASE             0x02310000
 #define CLOCK_BASE                      K2HK_PLL_CNTRL_BASE
 #define KS2_RSTCTRL                     (K2HK_PLL_CNTRL_BASE + 0xe8)
@@ -115,8 +108,6 @@
 #define K2HK_LPSC_ARM_SREFLEX          51
 #define K2HK_LPSC_TETRIS               52
 
-#define K2HK_UART0_BASE                0x02530c00
-
 /* DDR3A definitions */
 #define K2HK_DDR3A_EMIF_CTRL_BASE      0x21010000
 #define K2HK_DDR3A_EMIF_DATA_BASE      0x80000000
diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h
index a305a0cc09..ffdecbfcd6 100644
--- a/arch/arm/include/asm/arch-keystone/hardware.h
+++ b/arch/arm/include/asm/arch-keystone/hardware.h
@@ -22,32 +22,6 @@
 typedef volatile unsigned int   dv_reg;
 typedef volatile unsigned int   *dv_reg_p;
 
-#define ASYNC_EMIF_NUM_CS               4
-#define ASYNC_EMIF_MODE_NOR             0
-#define ASYNC_EMIF_MODE_NAND            1
-#define ASYNC_EMIF_MODE_ONENAND         2
-#define ASYNC_EMIF_PRESERVE             -1
-
-struct async_emif_config {
-	unsigned mode;
-	unsigned select_strobe;
-	unsigned extend_wait;
-	unsigned wr_setup;
-	unsigned wr_strobe;
-	unsigned wr_hold;
-	unsigned rd_setup;
-	unsigned rd_strobe;
-	unsigned rd_hold;
-	unsigned turn_around;
-	enum {
-		ASYNC_EMIF_8	= 0,
-		ASYNC_EMIF_16	= 1,
-		ASYNC_EMIF_32	= 2,
-	} width;
-};
-
-void init_async_emif(int num_cs, struct async_emif_config *config);
-
 struct ddr3_phy_config {
 	unsigned int pllcr;
 	unsigned int pgcr1_mask;
@@ -142,6 +116,13 @@ struct ddr3_emif_config {
 #define KS2_DDR3_PMCTL_OFFSET           0x38
 #define KS2_DDR3_ZQCFG_OFFSET           0xC8
 
+#define KS2_UART0_BASE                	0x02530c00
+#define KS2_UART1_BASE                	0x02531000
+
+/* AEMIF */
+#define KS2_AEMIF_CNTRL_BASE       	0x21000a00
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE   KS2_AEMIF_CNTRL_BASE
+
 #ifdef CONFIG_SOC_K2HK
 #include <asm/arch/hardware-k2hk.h>
 #endif
diff --git a/arch/arm/include/asm/arch-keystone/nand_defs.h b/arch/arm/include/asm/arch-keystone/nand_defs.h
deleted file mode 100644
index 58417dbc0b..0000000000
--- a/arch/arm/include/asm/arch-keystone/nand_defs.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * nand driver definitions to re-use davinci nand driver on Keystone2
- *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-#include <linux/mtd/nand.h>
-
-#define MASK_CLE         0x4000
-#define	MASK_ALE         0x2000
-
-#define NAND_READ_START  0x00
-#define NAND_READ_END    0x30
-#define NAND_STATUS      0x70
-
-#endif
diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h
index 7012ea7ff0..a7102d5640 100644
--- a/arch/arm/include/asm/arch-keystone/spl.h
+++ b/arch/arm/include/asm/arch-keystone/spl.h
@@ -5,7 +5,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef _ASM_ARCH_SPL_H_
-#define _ASM_SPL_H_
+#define _ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_SPI        2
 
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index bdb1435291..d2dfb1e19a 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -354,14 +354,6 @@ enum {
 
 #define GPMC_CS_ENABLE		0x1
 
-#define SMNAND_GPMC_CONFIG1	0x00000800
-#define SMNAND_GPMC_CONFIG2	0x00141400
-#define SMNAND_GPMC_CONFIG3	0x00141400
-#define SMNAND_GPMC_CONFIG4	0x0F010F01
-#define SMNAND_GPMC_CONFIG5	0x010C1414
-#define SMNAND_GPMC_CONFIG6	0x1F0F0A80
-#define SMNAND_GPMC_CONFIG7	0x00000C44
-
 #define M_NAND_GPMC_CONFIG1	0x00001800
 #define M_NAND_GPMC_CONFIG2	0x00141400
 #define M_NAND_GPMC_CONFIG3	0x00141400
diff --git a/arch/arm/include/asm/arch-socfpga/scan_manager.h b/arch/arm/include/asm/arch-socfpga/scan_manager.h
new file mode 100644
index 0000000000..f9be6211b3
--- /dev/null
+++ b/arch/arm/include/asm/arch-socfpga/scan_manager.h
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef	_SCAN_MANAGER_H_
+#define	_SCAN_MANAGER_H_
+
+struct socfpga_scan_manager {
+	u32	stat;
+	u32	en;
+	u32	padding[2];
+	u32	fifo_single_byte;
+	u32	fifo_double_byte;
+	u32	fifo_quad_byte;
+};
+
+/*
+ * Shift count to get number of IO scan chain data in granularity
+ * of 128-bit ( N / 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_SHIFT		7
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 128-bit ( N mod 128 )
+ */
+#define IO_SCAN_CHAIN_128BIT_MASK		0x7F
+
+/*
+ * Shift count to get number of IO scan chain
+ * data in granularity of 32-bit ( N / 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_SHIFT		5
+
+/*
+ * Mask to get residual IO scan chain data in
+ * granularity of 32-bit ( N mod 32 )
+ */
+#define IO_SCAN_CHAIN_32BIT_MASK		0x1F
+
+/* Byte mask */
+#define IO_SCAN_CHAIN_BYTE_MASK			0xFF
+
+/* 24-bits (3 bytes) IO scan chain payload definition */
+#define IO_SCAN_CHAIN_PAYLOAD_24BIT		24
+
+/*
+ * Maximum length of TDI_TDO packet payload is 128 bits,
+ * represented by (length - 1) in TDI_TDO header
+ */
+#define TDI_TDO_MAX_PAYLOAD			127
+
+/* TDI_TDO packet header for IO scan chain program */
+#define TDI_TDO_HEADER_FIRST_BYTE		0x80
+
+/* Position of second command byte for TDI_TDO packet */
+#define TDI_TDO_HEADER_SECOND_BYTE_SHIFT	8
+
+/*
+ * Maximum polling loop to wait for IO scan chain engine
+ * becomes idle to prevent infinite loop
+ */
+#define SCAN_MAX_DELAY				100
+
+#define SCANMGR_STAT_ACTIVE_GET(x) (((x) & 0x80000000) >> 31)
+#define SCANMGR_STAT_WFIFOCNT_GET(x) (((x) & 0x70000000) >> 28)
+
+/*
+ * Program HPS IO Scan Chain
+ * io_scan_chain_id - IO scan chain ID
+ * io_scan_chain_len_in_bits - IO scan chain length in bits
+ * iocsr_scan_chain - IO scan chain table
+ */
+uint32_t scan_mgr_io_scan_chain_prg(
+	uint32_t io_scan_chain_id,
+	uint32_t io_scan_chain_len_in_bits,
+	const uint32_t *iocsr_scan_chain);
+
+extern const uint32_t iocsr_scan_chain0_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain1_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain2_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)];
+extern const uint32_t iocsr_scan_chain3_table[
+	((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH / 32) + 1)];
+
+#endif /* _SCAN_MANAGER_H_ */
diff --git a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
index f564046bc0..5f738240f1 100644
--- a/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
+++ b/arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
@@ -11,8 +11,10 @@
 #define SOCFPGA_UART0_ADDRESS 0xffc02000
 #define SOCFPGA_UART1_ADDRESS 0xffc03000
 #define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
+#define SOCFPGA_L4WD0_ADDRESS 0xffd02000
 #define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
 #define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
 #define SOCFPGA_SYSMGR_ADDRESS 0xffd08000
+#define SOCFPGA_SCANMGR_ADDRESS 0xfff02000
 
 #endif /* _SOCFPGA_BASE_ADDRS_H_ */
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index ff871bcaee..acbec46cb8 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -7,7 +7,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
 #define BOOT_DEVICE_NONE	0
 #define BOOT_DEVICE_XIP		1
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 853e59bb6e..7ca690700c 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -124,6 +124,8 @@ struct i2c_ctlr {
 /* bit fields definitions for IO Packet Header 3 format */
 #define PKT_HDR3_READ_MODE_SHIFT	19
 #define PKT_HDR3_READ_MODE_MASK		(1 << PKT_HDR3_READ_MODE_SHIFT)
+#define PKT_HDR3_REPEAT_START_SHIFT	16
+#define PKT_HDR3_REPEAT_START_MASK	(1 << PKT_HDR3_REPEAT_START_SHIFT)
 #define PKT_HDR3_SLAVE_ADDR_SHIFT	0
 #define PKT_HDR3_SLAVE_ADDR_MASK	(0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT)
 
diff --git a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h b/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
deleted file mode 100644
index 9969a018e7..0000000000
--- a/arch/arm/include/asm/arch-tnetv107x/emif_defs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/arch-davinci/emif_defs.h>
diff --git a/arch/arm/include/asm/arch-tnetv107x/hardware.h b/arch/arm/include/asm/arch-tnetv107x/hardware.h
index 2a7ca4e00c..d458e0bdf0 100644
--- a/arch/arm/include/asm/arch-tnetv107x/hardware.h
+++ b/arch/arm/include/asm/arch-tnetv107x/hardware.h
@@ -155,4 +155,6 @@ int wdt_kick(void);
 #define INTC_HINT_EN			(TNETV107X_INTC_BASE + 0x1500)
 #define INTC_EN_CLR0			(TNETV107X_INTC_BASE + 0x380)
 
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE	TNETV107X_ASYNC_EMIF_CNTRL_BASE
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h b/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
deleted file mode 100644
index b298fba905..0000000000
--- a/arch/arm/include/asm/arch-tnetv107x/nand_defs.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * TNETV107X: NAND definitions
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _NAND_DEFS_H_
-#define _NAND_DEFS_H_
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/emif_defs.h>
-
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE	TNETV107X_ASYNC_EMIF_CNTRL_BASE
-
-#define	MASK_CLE		0x4000
-#define	MASK_ALE		0x2000
-
-#define NAND_READ_START		0x00
-#define NAND_READ_END		0x30
-#define NAND_STATUS		0x70
-
-extern void davinci_nand_init(struct nand_chip *nand);
-
-#endif
diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index e17c7d1f70..5256624adf 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -150,6 +150,9 @@ struct anadig_reg {
 #define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
 #define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
 
+#define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
+#define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
+#define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET	18
 #define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK		(0x3 << 18)
 #define CCM_CSCMR1_ESDHC1_CLK_SEL(v)		(((v) & 0x3) << 18)
@@ -161,6 +164,11 @@ struct anadig_reg {
 #define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
 #define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
 
+#define CCM_CSCDR3_QSPI0_EN			(1 << 4)
+#define CCM_CSCDR3_QSPI0_DIV(v)			((v) << 3)
+#define CCM_CSCDR3_QSPI0_X2_DIV(v)		((v) << 2)
+#define CCM_CSCDR3_QSPI0_X4_DIV(v)		((v) & 0x3)
+
 #define CCM_CSCMR2_RMII_CLK_SEL_OFFSET		4
 #define CCM_CSCMR2_RMII_CLK_SEL_MASK		(0x3 << 4)
 #define CCM_CSCMR2_RMII_CLK_SEL(v)		(((v) & 0x3) << 4)
@@ -170,6 +178,7 @@ struct anadig_reg {
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
+#define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
 #define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR2_PORTA_CTRL_MASK		(0x3 << 18)
 #define CCM_CCGR2_PORTB_CTRL_MASK		(0x3 << 20)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 0c28e1b840..bd6f680b63 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -87,6 +87,8 @@
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 
+#define QSPI0_AMBA_BASE		0x20000000
+
 /* MUX mode and PAD ctrl are in one register */
 #define CONFIG_IOMUX_SHARE_CONF_REG
 
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 88807d8db4..a965641681 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -20,6 +20,9 @@
 #define VF610_I2C_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \
 				PAD_CTL_SPEED_HIGH | PAD_CTL_OBE_IBE_ENABLE)
 
+#define VF610_QSPI_PAD_CTRL	(PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_150ohm | \
+				PAD_CTL_PUS_22K_UP | PAD_CTL_OBE_IBE_ENABLE)
+
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
 	VF610_PAD_PTA6__RMII0_CLKOUT		= IOMUX_PAD(0x0000, 0x0000, 1, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -53,6 +56,18 @@ enum {
 	VF610_PAD_PTA29__ESDHC1_DAT3		= IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL),
 	VF610_PAD_PTB14__I2C0_SCL		= IOMUX_PAD(0x0090, 0x0090, 2, 0x033c, 1, VF610_I2C_PAD_CTRL),
 	VF610_PAD_PTB15__I2C0_SDA		= IOMUX_PAD(0x0094, 0x0094, 2, 0x0340, 1, VF610_I2C_PAD_CTRL),
+	VF610_PAD_PTD0__QSPI0_A_QSCK		= IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD1__QSPI0_A_CS0		= IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD2__QSPI0_A_DATA3		= IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD3__QSPI0_A_DATA2		= IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD4__QSPI0_A_DATA1		= IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD5__QSPI0_A_DATA0		= IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD7__QSPI0_B_QSCK		= IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD8__QSPI0_B_CS0		= IOMUX_PAD(0x015c, 0x015c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD9__QSPI0_B_DATA3		= IOMUX_PAD(0x0160, 0x0160, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD10__QSPI0_B_DATA2		= IOMUX_PAD(0x0164, 0x0164, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD11__QSPI0_B_DATA1		= IOMUX_PAD(0x0168, 0x0168, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD12__QSPI0_B_DATA0		= IOMUX_PAD(0x016c, 0x016c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A13__DDR_A_13		= IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index 1193e76a82..4b7b67b643 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -108,4 +108,28 @@
 				TCR_IRGN_WBWA |		\
 				TCR_T0SZ(VA_BITS))
 
+#ifndef __ASSEMBLY__
+void set_pgtable_section(u64 *page_table, u64 index,
+			 u64 section, u64 memory_type);
+static inline void set_ttbr_tcr_mair(int el, u64 table, u64 tcr, u64 attr)
+{
+	asm volatile("dsb sy");
+	if (el == 1) {
+		asm volatile("msr ttbr0_el1, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el1, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el1, %0" : : "r" (attr) : "memory");
+	} else if (el == 2) {
+		asm volatile("msr ttbr0_el2, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el2, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el2, %0" : : "r" (attr) : "memory");
+	} else if (el == 3) {
+		asm volatile("msr ttbr0_el3, %0" : : "r" (table) : "memory");
+		asm volatile("msr tcr_el3, %0" : : "r" (tcr) : "memory");
+		asm volatile("msr mair_el3, %0" : : "r" (attr) : "memory");
+	} else {
+		hang();
+	}
+	asm volatile("isb");
+}
+#endif
 #endif /* _ASM_ARMV8_MMU_H_ */
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 1b22eeb5fc..34c07fe500 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -25,7 +25,7 @@ typedef struct { volatile int counter; } atomic_t;
 #define ATOMIC_INIT(i)	{ (i) }
 
 #ifdef __KERNEL__
-#include <asm/proc/system.h>
+#include <asm/proc-armv/system.h>
 
 #define atomic_read(v)	((v)->counter)
 #define atomic_set(v,i)	(((v)->counter) = (i))
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index 879e20e024..597dafbf9d 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -17,7 +17,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/proc/system.h>
+#include <asm/proc-armv/system.h>
 
 #define smp_mb__before_clear_bit()	do { } while (0)
 #define smp_mb__after_clear_bit()	do { } while (0)
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index ddebbc8fcd..a836e9f2ab 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -29,6 +29,9 @@ void l2_cache_enable(void);
 void l2_cache_disable(void);
 void set_section_dcache(int section, enum dcache_option option);
 
+void arm_init_before_mmu(void);
+void arm_init_domains(void);
+void cpu_cache_initialization(void);
 void dram_bank_mmu_setup(int bank);
 
 #endif
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 2a20a770bc..d3433dafd9 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -17,4 +17,8 @@
 #define CONFIG_STATIC_RELA
 #endif
 
+#ifdef CONFIG_FSL_LSCH3
+#include <asm/arch-fsl-lsch3/config.h>
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 45668ca4dd..b8d6bdca9b 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -642,11 +642,16 @@ struct emif_reg_struct {
 	u32 emif_ddr_phy_ctrl_1;
 	u32 emif_ddr_phy_ctrl_1_shdw;
 	u32 emif_ddr_phy_ctrl_2;
-	u32 padding7[12];
+	u32 padding7[4];
+	u32 emif_prio_class_serv_map;
+	u32 emif_connect_id_serv_1_map;
+	u32 emif_connect_id_serv_2_map;
+	u32 padding8[5];
 	u32 emif_rd_wr_exec_thresh;
-	u32 padding8[7];
+	u32 emif_cos_config;
+	u32 padding9[6];
 	u32 emif_ddr_phy_status[21];
-	u32 padding9[27];
+	u32 padding10[27];
 	u32 emif_ddr_ext_phy_ctrl_1;
 	u32 emif_ddr_ext_phy_ctrl_1_shdw;
 	u32 emif_ddr_ext_phy_ctrl_2;
@@ -1137,6 +1142,10 @@ struct emif_regs {
 	u32 emif_rd_wr_lvl_rmp_ctl;
 	u32 emif_rd_wr_lvl_ctl;
 	u32 emif_rd_wr_exec_thresh;
+	u32 emif_prio_class_serv_map;
+	u32 emif_connect_id_serv_1_map;
+	u32 emif_connect_id_serv_2_map;
+	u32 emif_cos_config;
 };
 
 struct lpddr2_mr_regs {
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index dfe1ebfa92..e91d4acb18 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -123,12 +123,14 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_SPEED_MED	(1 << 12)
 #define PAD_CTL_SPEED_HIGH	(3 << 12)
 
+#define PAD_CTL_DSE_150ohm	(1 << 6)
 #define PAD_CTL_DSE_50ohm	(3 << 6)
 #define PAD_CTL_DSE_25ohm	(6 << 6)
 #define PAD_CTL_DSE_20ohm	(7 << 6)
 
 #define PAD_CTL_PUS_47K_UP	(1 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PUS_100K_UP	(2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP	(3 << 4 | PAD_CTL_PUE)
 #define PAD_CTL_PKE		(1 << 3)
 #define PAD_CTL_PUE		(1 << 2 | PAD_CTL_PKE)
 
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 6a1f05ac3e..214f3ea51f 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -70,10 +70,12 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
 #define __arch_getb(a)			(*(volatile unsigned char *)(a))
 #define __arch_getw(a)			(*(volatile unsigned short *)(a))
 #define __arch_getl(a)			(*(volatile unsigned int *)(a))
+#define __arch_getq(a)			(*(volatile unsigned long long *)(a))
 
 #define __arch_putb(v,a)		(*(volatile unsigned char *)(a) = (v))
 #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
 #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+#define __arch_putq(v,a)		(*(volatile unsigned long long *)(a) = (v))
 
 extern inline void __raw_writesb(unsigned long addr, const void *data,
 				 int bytelen)
@@ -123,10 +125,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
 #define __raw_writeb(v,a)	__arch_putb(v,a)
 #define __raw_writew(v,a)	__arch_putw(v,a)
 #define __raw_writel(v,a)	__arch_putl(v,a)
+#define __raw_writeq(v,a)	__arch_putq(v,a)
 
 #define __raw_readb(a)		__arch_getb(a)
 #define __raw_readw(a)		__arch_getw(a)
 #define __raw_readl(a)		__arch_getl(a)
+#define __raw_readq(a)		__arch_getq(a)
 
 /*
  * TODO: The kernel offers some more advanced versions of barriers, it might
@@ -139,10 +143,12 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
 #define writeb(v,c)	({ u8  __v = v; __iowmb(); __arch_putb(__v,c); __v; })
 #define writew(v,c)	({ u16 __v = v; __iowmb(); __arch_putw(__v,c); __v; })
 #define writel(v,c)	({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; })
+#define writeq(v,c)	({ u64 __v = v; __iowmb(); __arch_putq(__v,c); __v; })
 
 #define readb(c)	({ u8  __v = __arch_getb(c); __iormb(); __v; })
 #define readw(c)	({ u16 __v = __arch_getw(c); __iormb(); __v; })
 #define readl(c)	({ u32 __v = __arch_getl(c); __iormb(); __v; })
+#define readq(c)	({ u64 __v = __arch_getq(c); __iormb(); __v; })
 
 /*
  * The compiler seems to be incapable of optimising constants
@@ -168,9 +174,11 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
 #define out_arch(type,endian,a,v)	__raw_write##type(cpu_to_##endian(v),a)
 #define in_arch(type,endian,a)		endian##_to_cpu(__raw_read##type(a))
 
+#define out_le64(a,v)	out_arch(q,le64,a,v)
 #define out_le32(a,v)	out_arch(l,le32,a,v)
 #define out_le16(a,v)	out_arch(w,le16,a,v)
 
+#define in_le64(a)	in_arch(q,le64,a)
 #define in_le32(a)	in_arch(l,le32,a)
 #define in_le16(a)	in_arch(w,le16,a)
 
@@ -437,4 +445,7 @@ out:
 
 #endif	/* __mem_isa */
 #endif	/* __KERNEL__ */
+
+#include <iotrace.h>
+
 #endif	/* __ASM_ARM_IO_H */
diff --git a/arch/arm/include/asm/proc-armv/processor.h b/arch/arm/include/asm/proc-armv/processor.h
index 5bfab7fb90..532f2079e6 100644
--- a/arch/arm/include/asm/proc-armv/processor.h
+++ b/arch/arm/include/asm/proc-armv/processor.h
@@ -18,7 +18,7 @@
 #ifndef __ASM_PROC_PROCESSOR_H
 #define __ASM_PROC_PROCESSOR_H
 
-#include <asm/proc/domain.h>
+#include <asm/proc-armv/domain.h>
 
 #define KERNEL_STACK_SIZE	PAGE_SIZE
 
diff --git a/arch/arm/include/asm/proc-armv/system.h b/arch/arm/include/asm/proc-armv/system.h
index 693d1f4921..c61374e9f2 100644
--- a/arch/arm/include/asm/proc-armv/system.h
+++ b/arch/arm/include/asm/proc-armv/system.h
@@ -22,7 +22,7 @@
 #define local_irq_save(flags)					\
 	({							\
 	asm volatile(						\
-	"mrs	%0, daif"					\
+	"mrs	%0, daif\n"					\
 	"msr	daifset, #3"					\
 	: "=r" (flags)						\
 	:							\
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 445d4495be..83481c6cda 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -45,7 +45,7 @@ typedef unsigned long mm_segment_t;		/* domain register	*/
 #if 0	/* XXX###XXX */
 #include <asm/arch/memory.h>
 #endif	/* XXX###XXX */
-#include <asm/proc/processor.h>
+#include <asm/proc-armv/processor.h>
 #include <asm/types.h>
 
 union debug_insn {
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 73c9087b50..a836f6cc60 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -11,7 +11,7 @@
 /* options set using PTRACE_SETOPTIONS */
 #define PTRACE_O_TRACESYSGOOD	0x00000001
 
-#include <asm/proc/ptrace.h>
+#include <asm/proc-armv/ptrace.h>
 
 #ifndef __ASSEMBLY__
 #define pc_pointer(v) \
diff --git a/arch/arm/include/asm/semihosting.h b/arch/arm/include/asm/semihosting.h
new file mode 100644
index 0000000000..74111dc359
--- /dev/null
+++ b/arch/arm/include/asm/semihosting.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Broadcom Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SEMIHOSTING_H__
+#define __SEMIHOSTING_H__
+
+/*
+ * ARM semihosting functions for loading images to memory. See the source
+ * code for more information.
+ */
+int smh_load(const char *fname, void *memp, int avail, int verbose);
+int smh_read(int fd, void *memp, int len);
+int smh_open(const char *fname, char *modestr);
+int smh_close(int fd);
+int smh_len_fd(int fd);
+int smh_len(const char *fname);
+
+#endif /* __SEMIHOSTING_H__ */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 74ee9a4df9..d51ba668f3 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -78,6 +78,8 @@ void gic_send_sgi(unsigned long sgino);
 void wait_for_wakeup(void);
 void smp_kick_all_cpus(void);
 
+void flush_l3_cache(void);
+
 #endif	/* __ASSEMBLY__ */
 
 #else /* CONFIG_ARM64 */
diff --git a/arch/arm/include/asm/arch-keystone/emif_defs.h b/arch/arm/include/asm/ti-common/davinci_nand.h
index a3378aa30e..11407be144 100644
--- a/arch/arm/include/asm/arch-keystone/emif_defs.h
+++ b/arch/arm/include/asm/ti-common/davinci_nand.h
@@ -1,23 +1,45 @@
 /*
- * emif definitions to re-use davinci emif driver on Keystone2
+ * NAND Flash Driver
  *
- * (C) Copyright 2012-2014
- *     Texas Instruments Incorporated, <www.ti.com>
- * (C) Copyright 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2006-2014 Texas Instruments.
  *
- * SPDX-License-Identifier:     GPL-2.0+
+ * Based on Linux DaVinci NAND driver by TI.
  */
-#ifndef _EMIF_DEFS_H_
-#define _EMIF_DEFS_H_
 
+#ifndef _DAVINCI_NAND_H_
+#define _DAVINCI_NAND_H_
+
+#include <linux/mtd/nand.h>
 #include <asm/arch/hardware.h>
 
+#define NAND_READ_START  	0x00
+#define NAND_READ_END    	0x30
+#define NAND_STATUS      	0x70
+
+#define MASK_CLE		0x10
+#define MASK_ALE		0x08
+
+#ifdef CONFIG_SYS_NAND_MASK_CLE
+#undef MASK_CLE
+#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE
+#endif
+#ifdef CONFIG_SYS_NAND_MASK_ALE
+#undef MASK_ALE
+#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE
+#endif
+
 struct davinci_emif_regs {
 	uint32_t	ercsr;
 	uint32_t	awccr;
 	uint32_t	sdbcr;
 	uint32_t	sdrcr;
-	uint32_t	abncr[4];
+	union {
+		uint32_t abncr[4];
+		uint32_t ab1cr;
+		uint32_t ab2cr;
+		uint32_t ab3cr;
+		uint32_t ab4cr;
+	};
 	uint32_t	sdtimr;
 	uint32_t	ddrsr;
 	uint32_t	ddrphycr;
@@ -56,18 +78,21 @@ struct davinci_emif_regs {
 #define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + ((n) - 2)))
 #define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
 #define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
 
 /* Chip Select setup */
 #define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
 #define DAVINCI_ABCR_EXT_WAIT				(1 << 30)
-#define DAVINCI_ABCR_WSETUP(n)				((n) << 26)
-#define DAVINCI_ABCR_WSTROBE(n)				((n) << 20)
-#define DAVINCI_ABCR_WHOLD(n)				((n) << 17)
-#define DAVINCI_ABCR_RSETUP(n)				((n) << 13)
-#define DAVINCI_ABCR_RSTROBE(n)				((n) << 7)
-#define DAVINCI_ABCR_RHOLD(n)				((n) << 4)
-#define DAVINCI_ABCR_TA(n)				((n) << 2)
+#define DAVINCI_ABCR_WSETUP(n)				(n << 26)
+#define DAVINCI_ABCR_WSTROBE(n)				(n << 20)
+#define DAVINCI_ABCR_WHOLD(n)				(n << 17)
+#define DAVINCI_ABCR_RSETUP(n)				(n << 13)
+#define DAVINCI_ABCR_RSTROBE(n)				(n << 7)
+#define DAVINCI_ABCR_RHOLD(n)				(n << 4)
+#define DAVINCI_ABCR_TA(n)				(n << 2)
 #define DAVINCI_ABCR_ASIZE_16BIT			1
 #define DAVINCI_ABCR_ASIZE_8BIT				0
 
+void davinci_nand_init(struct nand_chip *nand);
+
 #endif
diff --git a/arch/arm/include/asm/ti-common/ti-aemif.h b/arch/arm/include/asm/ti-common/ti-aemif.h
new file mode 100644
index 0000000000..4a311d4a2f
--- /dev/null
+++ b/arch/arm/include/asm/ti-common/ti-aemif.h
@@ -0,0 +1,39 @@
+/*
+ * AEMIF definitions
+ *
+ * (C) Copyright 2012-2014
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _AEMIF_H_
+#define _AEMIF_H_
+
+#define AEMIF_NUM_CS               4
+#define AEMIF_MODE_NOR             0
+#define AEMIF_MODE_NAND            1
+#define AEMIF_MODE_ONENAND         2
+#define AEMIF_PRESERVE             -1
+
+struct aemif_config {
+	unsigned mode;
+	unsigned select_strobe;
+	unsigned extend_wait;
+	unsigned wr_setup;
+	unsigned wr_strobe;
+	unsigned wr_hold;
+	unsigned rd_setup;
+	unsigned rd_strobe;
+	unsigned rd_hold;
+	unsigned turn_around;
+	enum {
+		AEMIF_WIDTH_8	= 0,
+		AEMIF_WIDTH_16	= 1,
+		AEMIF_WIDTH_32	= 2,
+	} width;
+};
+
+void aemif_init(int num_cs, struct aemif_config *config);
+
+#endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 585f1f781b..1ef240047f 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
 else
 obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
 endif
+obj-$(CONFIG_SEMIHOSTING) += semihosting.o
 
 obj-y	+= sections.o
 ifdef CONFIG_ARM64
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 9b473b5eab..76adaf3aa4 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -277,7 +277,7 @@ void board_init_f(ulong bootflag)
 	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #ifdef CONFIG_OF_EMBED
 	/* Get a pointer to the FDT */
-	gd->fdt_blob = __dtb_db_begin;
+	gd->fdt_blob = __dtb_dt_begin;
 #elif defined CONFIG_OF_SEPARATE
 	/* FDT is at end of image */
 	gd->fdt_blob = &_end;
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index 8642010a17..5fdfdbfca5 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -14,11 +14,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void __arm_init_before_mmu(void)
+__weak void arm_init_before_mmu(void)
 {
 }
-void arm_init_before_mmu(void)
-	__attribute__((weak, alias("__arm_init_before_mmu")));
 
 __weak void arm_init_domains(void)
 {
@@ -44,14 +42,11 @@ void set_section_dcache(int section, enum dcache_option option)
 	page_table[section] = value;
 }
 
-void __mmu_page_table_flush(unsigned long start, unsigned long stop)
+__weak void mmu_page_table_flush(unsigned long start, unsigned long stop)
 {
 	debug("%s: Warning: not implemented\n", __func__);
 }
 
-void mmu_page_table_flush(unsigned long start, unsigned long stop)
-	__attribute__((weak, alias("__mmu_page_table_flush")));
-
 void mmu_set_region_dcache_behaviour(u32 start, int size,
 				     enum dcache_option option)
 {
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 4f6b9f01cb..4e597a4c1d 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -9,7 +9,7 @@
 
 #include <common.h>
 
-void  __flush_cache(unsigned long start, unsigned long size)
+__weak void flush_cache(unsigned long start, unsigned long size)
 {
 #if defined(CONFIG_ARM1136)
 
@@ -31,28 +31,21 @@ void  __flush_cache(unsigned long start, unsigned long size)
 #endif /* CONFIG_ARM926EJS */
 	return;
 }
-void  flush_cache(unsigned long start, unsigned long size)
-	__attribute__((weak, alias("__flush_cache")));
 
 /*
  * Default implementation:
  * do a range flush for the entire range
  */
-void	__flush_dcache_all(void)
+__weak void flush_dcache_all(void)
 {
 	flush_cache(0, ~0);
 }
-void	flush_dcache_all(void)
-	__attribute__((weak, alias("__flush_dcache_all")));
-
 
 /*
  * Default implementation of enable_caches()
  * Real implementation should be in platform code
  */
-void __enable_caches(void)
+__weak void enable_caches(void)
 {
 	puts("WARNING: Caches not enabled\n");
 }
-void enable_caches(void)
-	__attribute__((weak, alias("__enable_caches")));
diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c
new file mode 100644
index 0000000000..cb5dc26ac3
--- /dev/null
+++ b/arch/arm/lib/semihosting.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2014 Broadcom Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Minimal semihosting implementation for reading files into memory. If more
+ * features like writing files or console output are required they can be
+ * added later. This code has been tested on arm64/aarch64 fastmodel only.
+ * An untested placeholder exists for armv7 architectures, but since they
+ * are commonly available in silicon now, fastmodel usage makes less sense
+ * for them.
+ */
+#include <common.h>
+#include <asm/semihosting.h>
+
+#define SYSOPEN		0x01
+#define SYSCLOSE	0x02
+#define SYSREAD		0x06
+#define SYSFLEN		0x0C
+
+#define MODE_READ	0x0
+#define MODE_READBIN	0x1
+
+/*
+ * Call the handler
+ */
+static int smh_trap(unsigned int sysnum, void *addr)
+{
+	register int result asm("r0");
+#if defined(CONFIG_ARM64)
+	asm volatile ("hlt #0xf000" : "=r" (result) : "0"(sysnum), "r"(addr));
+#else
+	/* Note - untested placeholder */
+	asm volatile ("svc #0x123456" : "=r" (result) : "0"(sysnum), "r"(addr));
+#endif
+	return result;
+}
+
+/*
+ * Open, load a file into memory, and close it. Check that the available space
+ * is sufficient to store the entire file. Return the bytes actually read from
+ * the file as seen by the read function. The verbose flag enables some extra
+ * printing of successful read status.
+ */
+int smh_load(const char *fname, void *memp, int avail, int verbose)
+{
+	int ret, fd, len;
+
+	ret = -1;
+
+	debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname,
+	      avail, memp);
+
+	/* Open the file */
+	fd = smh_open(fname, "rb");
+	if (fd == -1)
+		return ret;
+
+	/* Get the file length */
+	ret = smh_len_fd(fd);
+	if (ret == -1) {
+		smh_close(fd);
+		return ret;
+	}
+
+	/* Check that the file will fit in the supplied buffer */
+	if (ret > avail) {
+		printf("%s: ERROR ret %d, avail %u\n", __func__, ret,
+		       avail);
+		smh_close(fd);
+		return ret;
+	}
+
+	len = ret;
+
+	/* Read the file into the buffer */
+	ret = smh_read(fd, memp, len);
+	if (ret == 0) {
+		/* Print successful load information if requested */
+		if (verbose) {
+			printf("\n%s\n", fname);
+			printf("    0x%8p dest\n", memp);
+			printf("    0x%08x size\n", len);
+			printf("    0x%08x avail\n", avail);
+		}
+	}
+
+	/* Close the file */
+	smh_close(fd);
+
+	return ret;
+}
+
+/*
+ * Read 'len' bytes of file into 'memp'. Returns 0 on success, else failure
+ */
+int smh_read(int fd, void *memp, int len)
+{
+	int ret;
+	struct smh_read_s {
+		int fd;
+		void *memp;
+		int len;
+	} read;
+
+	debug("%s: fd %d, memp %p, len %d\n", __func__, fd, memp, len);
+
+	read.fd = fd;
+	read.memp = memp;
+	read.len = len;
+
+	ret = smh_trap(SYSREAD, &read);
+	if (ret == 0) {
+		return 0;
+	} else {
+		/*
+		 * The ARM handler allows for returning partial lengths,
+		 * but in practice this never happens so rather than create
+		 * hard to maintain partial read loops and such, just fail
+		 * with an error message.
+		 */
+		printf("%s: ERROR ret %d, fd %d, len %u memp %p\n",
+		       __func__, ret, fd, len, memp);
+	}
+	return ret;
+}
+
+/*
+ * Open a file on the host. Mode is "r" or "rb" currently. Returns a file
+ * descriptor or -1 on error.
+ */
+int smh_open(const char *fname, char *modestr)
+{
+	int ret, fd, mode;
+	struct smh_open_s {
+		const char *fname;
+		unsigned int mode;
+		unsigned int len;
+	} open;
+
+	debug("%s: file \'%s\', mode \'%s\'\n", __func__, fname, modestr);
+
+	ret = -1;
+
+	/* Check the file mode */
+	if (!(strcmp(modestr, "r"))) {
+		mode = MODE_READ;
+	} else if (!(strcmp(modestr, "rb"))) {
+		mode = MODE_READBIN;
+	} else {
+		printf("%s: ERROR mode \'%s\' not supported\n", __func__,
+		       modestr);
+		return ret;
+	}
+
+	open.fname = fname;
+	open.len = strlen(fname);
+	open.mode = mode;
+
+	/* Open the file on the host */
+	fd = smh_trap(SYSOPEN, &open);
+	if (fd == -1)
+		printf("%s: ERROR fd %d for file \'%s\'\n", __func__, fd,
+		       fname);
+
+	return fd;
+}
+
+/*
+ * Close the file using the file descriptor
+ */
+int smh_close(int fd)
+{
+	int ret;
+	long fdlong;
+
+	debug("%s: fd %d\n", __func__, fd);
+
+	fdlong = (long)fd;
+	ret = smh_trap(SYSCLOSE, &fdlong);
+	if (ret == -1)
+		printf("%s: ERROR fd %d\n", __func__, fd);
+
+	return ret;
+}
+
+/*
+ * Get the file length from the file descriptor
+ */
+int smh_len_fd(int fd)
+{
+	int ret;
+	long fdlong;
+
+	debug("%s: fd %d\n", __func__, fd);
+
+	fdlong = (long)fd;
+	ret = smh_trap(SYSFLEN, &fdlong);
+	if (ret == -1)
+		printf("%s: ERROR ret %d\n", __func__, ret);
+
+	return ret;
+}
+
+/*
+ * Get the file length from the filename
+ */
+int smh_len(const char *fname)
+{
+	int ret, fd, len;
+
+	debug("%s: file \'%s\'\n", __func__, fname);
+
+	/* Open the file */
+	fd = smh_open(fname, "rb");
+	if (fd == -1)
+		return fd;
+
+	/* Get the file length */
+	len = smh_len_fd(fd);
+
+	/* Close the file */
+	ret = smh_close(fd);
+	if (ret == -1)
+		return ret;
+
+	debug("%s: returning len %d\n", __func__, len);
+
+	/* Return the file length (or -1 error indication) */
+	return len;
+}
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S
index d68cc477dc..e6538eff43 100644
--- a/arch/arm/lib/vectors.S
+++ b/arch/arm/lib/vectors.S
@@ -43,8 +43,6 @@
  *************************************************************************
  */
 
-_start:
-
 #ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
 	.word	CONFIG_SYS_DV_NOR_BOOT_CFG
 #endif