mips: xburst: remove remainders of dead board

Commit 54e458de deleted qi_lb60 board support
because of the incompatible license issue.

There is no board with XBurst CPU.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

7 files changed, 0 insertions, 842 deletions

diff --git a/arch/mips/cpu/xburst/Makefile b/arch/mips/cpu/xburst/Makefile
deleted file mode 100644
index 57714d0c95..0000000000
--- a/arch/mips/cpu/xburst/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-extra-y	= start.o
-obj-y	= cpu.o timer.o jz_serial.o
-obj-$(CONFIG_JZ4740) += jz4740.o
diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk
deleted file mode 100644
index b8e53e55c0..0000000000
--- a/arch/mips/cpu/xburst/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -march=mips32
-PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT
-ifdef CONFIG_SYS_BIG_ENDIAN
-PLATFORM_LDFLAGS  += -m elf32btsmip
-else
-PLATFORM_LDFLAGS  += -m elf32ltsmip
-endif
-
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 \
-			       -T $(srctree)/examples/standalone/mips.lds
diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c
deleted file mode 100644
index 1fdaa32bb0..0000000000
--- a/arch/mips/cpu/xburst/cpu.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- * (C) Copyright 2011
- * Xiangfu Liu <xiangfu@openmobilefree.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mipsregs.h>
-#include <asm/cacheops.h>
-#include <asm/reboot.h>
-#include <asm/io.h>
-#include <asm/jz4740.h>
-
-#define cache_op(op, addr)		\
-	__asm__ __volatile__(		\
-		".set	push\n"		\
-		".set	noreorder\n"	\
-		".set	mips3\n"	\
-		"cache	%0, %1\n"	\
-		".set	pop\n"		\
-		:			\
-		: "i" (op), "R" (*(unsigned char *)(addr)))
-
-void __attribute__((weak)) _machine_restart(void)
-{
-	struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE;
-	struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
-	u16 tmp;
-
-	/* wdt_select_extalclk() */
-	tmp = readw(&wdt->tcsr);
-	tmp &= ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN);
-	tmp |= WDT_TCSR_EXT_EN;
-	writew(tmp, &wdt->tcsr);
-
-	/* wdt_select_clk_div64() */
-	tmp = readw(&wdt->tcsr);
-	tmp &= ~WDT_TCSR_PRESCALE_MASK;
-	tmp |= WDT_TCSR_PRESCALE64,
-	writew(tmp, &wdt->tcsr);
-
-	writew(100, &wdt->tdr); /* wdt_set_data(100) */
-	writew(0, &wdt->tcnt); /* wdt_set_count(0); */
-	writel(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */
-	writeb(readb(&wdt->tcer) | WDT_TCER_TCEN, &wdt->tcer); /* wdt start */
-
-	while (1)
-		;
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	_machine_restart();
-
-	fprintf(stderr, "*** reset failed ***\n");
-	return 0;
-}
-
-void flush_cache(ulong start_addr, ulong size)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
-
-	for (; addr <= aend; addr += lsize) {
-		cache_op(HIT_WRITEBACK_INV_D, addr);
-		cache_op(HIT_INVALIDATE_I, addr);
-	}
-}
-
-void flush_dcache_range(ulong start_addr, ulong stop)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (stop - 1) & ~(lsize - 1);
-
-	for (; addr <= aend; addr += lsize)
-		cache_op(HIT_WRITEBACK_INV_D, addr);
-}
-
-void invalidate_dcache_range(ulong start_addr, ulong stop)
-{
-	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
-	unsigned long addr = start_addr & ~(lsize - 1);
-	unsigned long aend = (stop - 1) & ~(lsize - 1);
-
-	for (; addr <= aend; addr += lsize)
-		cache_op(HIT_INVALIDATE_D, addr);
-}
-
-void flush_icache_all(void)
-{
-	u32 addr, t = 0;
-
-	__asm__ __volatile__("mtc0 $0, $28"); /* Clear Taglo */
-	__asm__ __volatile__("mtc0 $0, $29"); /* Clear TagHi */
-
-	for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE;
-	     addr += CONFIG_SYS_CACHELINE_SIZE) {
-		cache_op(INDEX_STORE_TAG_I, addr);
-	}
-
-	/* invalidate btb */
-	__asm__ __volatile__(
-		".set mips32\n\t"
-		"mfc0 %0, $16, 7\n\t"
-		"nop\n\t"
-		"ori %0,2\n\t"
-		"mtc0 %0, $16, 7\n\t"
-		".set mips2\n\t"
-		:
-		: "r" (t));
-}
-
-void flush_dcache_all(void)
-{
-	u32 addr;
-
-	for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE;
-	     addr += CONFIG_SYS_CACHELINE_SIZE) {
-		cache_op(INDEX_WRITEBACK_INV_D, addr);
-	}
-
-	__asm__ __volatile__("sync");
-}
-
-void flush_cache_all(void)
-{
-	flush_dcache_all();
-	flush_icache_all();
-}
diff --git a/arch/mips/cpu/xburst/jz4740.c b/arch/mips/cpu/xburst/jz4740.c
deleted file mode 100644
index 30f35bde7a..0000000000
--- a/arch/mips/cpu/xburst/jz4740.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Jz4740 common routines
- * Copyright (c) 2006 Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/jz4740.h>
-
-void enable_interrupts(void)
-{
-}
-
-int disable_interrupts(void)
-{
-	return 0;
-}
-
-/*
- * PLL output clock = EXTAL * NF / (NR * NO)
- * NF = FD + 2, NR = RD + 2
- * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
- */
-void pll_init(void)
-{
-	struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
-
-	register unsigned int cfcr, plcr1;
-	int n2FR[33] = {
-		0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
-		7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
-		9
-	};
-	int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
-	int nf, pllout2;
-
-	cfcr =	CPM_CPCCR_CLKOEN |
-		CPM_CPCCR_PCS |
-		(n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
-		(n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
-		(n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
-		(n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
-		(n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
-
-	pllout2 = (cfcr & CPM_CPCCR_PCS) ?
-		CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
-
-	/* Init USB Host clock, pllout2 must be n*48MHz */
-	writel(pllout2 / 48000000 - 1, &cpm->uhccdr);
-
-	nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
-	plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
-		(0 << CPM_CPPCR_PLLN_BIT) |	/* RD=0, NR=2 */
-		(0 << CPM_CPPCR_PLLOD_BIT) |	/* OD=0, NO=1 */
-		(0x20 << CPM_CPPCR_PLLST_BIT) |	/* PLL stable time */
-		CPM_CPPCR_PLLEN;		/* enable PLL */
-
-	/* init PLL */
-	writel(cfcr, &cpm->cpccr);
-	writel(plcr1, &cpm->cppcr);
-}
-
-void sdram_init(void)
-{
-	struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
-
-	register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
-
-	unsigned int cas_latency_sdmr[2] = {
-		EMC_SDMR_CAS_2,
-		EMC_SDMR_CAS_3,
-	};
-
-	unsigned int cas_latency_dmcr[2] = {
-		1 << EMC_DMCR_TCL_BIT,	/* CAS latency is 2 */
-		2 << EMC_DMCR_TCL_BIT	/* CAS latency is 3 */
-	};
-
-	int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
-	cpu_clk = CONFIG_SYS_CPU_SPEED;
-	mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
-
-	writel(0, &emc->bcr);	/* Disable bus release */
-	writew(0, &emc->rtcsr);	/* Disable clock for counting */
-
-	/* Fault DMCR value for mode register setting*/
-#define SDRAM_ROW0	11
-#define SDRAM_COL0	8
-#define SDRAM_BANK40	0
-
-	dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) |
-		((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) |
-		(SDRAM_BANK40 << EMC_DMCR_BA_BIT) |
-		(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
-		EMC_DMCR_EPIN |
-		cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
-
-	/* Basic DMCR value */
-	dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) |
-		((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) |
-		(SDRAM_BANK4 << EMC_DMCR_BA_BIT) |
-		(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
-		EMC_DMCR_EPIN |
-		cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
-
-	/* SDRAM timimg */
-	ns = 1000000000 / mem_clk;
-	tmp = SDRAM_TRAS / ns;
-	if (tmp < 4)
-		tmp = 4;
-	if (tmp > 11)
-		tmp = 11;
-	dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT;
-	tmp = SDRAM_RCD / ns;
-
-	if (tmp > 3)
-		tmp = 3;
-	dmcr |= tmp << EMC_DMCR_RCD_BIT;
-	tmp = SDRAM_TPC / ns;
-
-	if (tmp > 7)
-		tmp = 7;
-	dmcr |= tmp << EMC_DMCR_TPC_BIT;
-	tmp = SDRAM_TRWL / ns;
-
-	if (tmp > 3)
-		tmp = 3;
-	dmcr |= tmp << EMC_DMCR_TRWL_BIT;
-	tmp = (SDRAM_TRAS + SDRAM_TPC) / ns;
-
-	if (tmp > 14)
-		tmp = 14;
-	dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT;
-
-	/* SDRAM mode value */
-	sdmode = EMC_SDMR_BT_SEQ |
-		 EMC_SDMR_OM_NORMAL |
-		 EMC_SDMR_BL_4 |
-		 cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
-
-	/* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
-	writel(dmcr, &emc->dmcr);
-	writeb(0, JZ4740_EMC_SDMR0 | sdmode);
-
-	/* Wait for precharge, > 200us */
-	tmp = (cpu_clk / 1000000) * 1000;
-	while (tmp--)
-		;
-
-	/* Stage 2. Enable auto-refresh */
-	writel(dmcr | EMC_DMCR_RFSH, &emc->dmcr);
-
-	tmp = SDRAM_TREF / ns;
-	tmp = tmp / 64 + 1;
-	if (tmp > 0xff)
-		tmp = 0xff;
-	writew(tmp, &emc->rtcor);
-	writew(0, &emc->rtcnt);
-	/* Divisor is 64, CKO/64 */
-	writew(EMC_RTCSR_CKS_64, &emc->rtcsr);
-
-	/* Wait for number of auto-refresh cycles */
-	tmp = (cpu_clk / 1000000) * 1000;
-	while (tmp--)
-		;
-
-	/* Stage 3. Mode Register Set */
-	writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
-	writeb(0, JZ4740_EMC_SDMR0 | sdmode);
-
-	/* Set back to basic DMCR value */
-	writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
-
-	/* everything is ok now */
-}
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void calc_clocks(void)
-{
-	unsigned int pllout;
-	unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-
-	pllout = __cpm_get_pllout();
-
-	gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
-	gd->arch.sys_clk = pllout / div[__cpm_get_hdiv()];
-	gd->arch.per_clk = pllout / div[__cpm_get_pdiv()];
-	gd->mem_clk = pllout / div[__cpm_get_mdiv()];
-	gd->arch.dev_clk = CONFIG_SYS_EXTAL;
-}
-
-void rtc_init(void)
-{
-	struct jz4740_rtc *rtc = (struct jz4740_rtc *)JZ4740_RTC_BASE;
-
-	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
-		;
-	writel(readl(&rtc->rcr) | RTC_RCR_AE, &rtc->rcr); /* enable alarm */
-
-	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
-		;
-	writel(0x00007fff, &rtc->rgr); /* type value */
-
-	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
-		;
-	writel(0x0000ffe0, &rtc->hwfcr); /* Power on delay 2s */
-
-	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
-		;
-	writel(0x00000fe0, &rtc->hrcr); /* reset delay 125ms */
-}
-
-/* U-Boot common routines */
-phys_size_t initdram(int board_type)
-{
-	struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
-	u32 dmcr;
-	u32 rows, cols, dw, banks;
-	ulong size;
-
-	dmcr = readl(&emc->dmcr);
-	rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
-	cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
-	dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
-	banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
-
-	size = (1 << (rows + cols)) * dw * banks;
-
-	return size;
-}
diff --git a/arch/mips/cpu/xburst/jz_serial.c b/arch/mips/cpu/xburst/jz_serial.c
deleted file mode 100644
index 9184223794..0000000000
--- a/arch/mips/cpu/xburst/jz_serial.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Jz4740 UART support
- * Copyright (c) 2011
- * Qi Hardware, Xiangfu Liu <xiangfu@sharism.cc>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/jz4740.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-/*
- * serial_init - initialize a channel
- *
- * This routine initializes the number of data bits, parity
- * and set the selected baud rate. Interrupts are disabled.
- * Set the modem control signals if the option is selected.
- *
- * RETURNS: N/A
- */
-struct jz4740_uart *uart = (struct jz4740_uart *)CONFIG_SYS_UART_BASE;
-
-static int jz_serial_init(void)
-{
-	/* Disable port interrupts while changing hardware */
-	writeb(0, &uart->dlhr_ier);
-
-	/* Disable UART unit function */
-	writeb(~UART_FCR_UUE, &uart->iir_fcr);
-
-	/* Set both receiver and transmitter in UART mode (not SIR) */
-	writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
-
-	/*
-	 * Set databits, stopbits and parity.
-	 * (8-bit data, 1 stopbit, no parity)
-	 */
-	writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
-
-	/* Set baud rate */
-	serial_setbrg();
-
-	/* Enable UART unit, enable and clear FIFO */
-	writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS,
-	       &uart->iir_fcr);
-
-	return 0;
-}
-
-static void jz_serial_setbrg(void)
-{
-	u32 baud_div, tmp;
-
-	baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
-
-	tmp = readb(&uart->lcr);
-	tmp |= UART_LCR_DLAB;
-	writeb(tmp, &uart->lcr);
-
-	writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
-	writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
-
-	tmp &= ~UART_LCR_DLAB;
-	writeb(tmp, &uart->lcr);
-}
-
-static int jz_serial_tstc(void)
-{
-	if (readb(&uart->lsr) & UART_LSR_DR)
-		return 1;
-
-	return 0;
-}
-
-static void jz_serial_putc(const char c)
-{
-	if (c == '\n')
-		serial_putc('\r');
-
-	/* Wait for fifo to shift out some bytes */
-	while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
-		;
-
-	writeb((u8)c, &uart->rbr_thr_dllr);
-}
-
-static int jz_serial_getc(void)
-{
-	while (!serial_tstc())
-		;
-
-	return readb(&uart->rbr_thr_dllr);
-}
-
-static struct serial_device jz_serial_drv = {
-	.name	= "jz_serial",
-	.start	= jz_serial_init,
-	.stop	= NULL,
-	.setbrg	= jz_serial_setbrg,
-	.putc	= jz_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= jz_serial_getc,
-	.tstc	= jz_serial_tstc,
-};
-
-void jz_serial_initialize(void)
-{
-	serial_register(&jz_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &jz_serial_drv;
-}
diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S
deleted file mode 100644
index 10dffb4a5c..0000000000
--- a/arch/mips/cpu/xburst/start.S
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- *  Startup Code for MIPS32 XBURST CPU-core
- *
- *  Copyright (c) 2010 Xiangfu Liu <xiangfu@sharism.cc>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/cacheops.h>
-
-	.set noreorder
-
-	.globl _start
-	.text
-_start:
-	/* Initialize $gp */
-	bal	1f
-	 nop
-	.word	_gp
-1:
-	lw	gp, 0(ra)
-
-	/* Set up temporary stack */
-	li	sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
-
-	la	t9, board_init_f
-	jr	t9
-	 nop
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * a0 = addr_sp
- * a1 = gd
- * a2 = destination address
- */
-	.globl	relocate_code
-	.ent	relocate_code
-relocate_code:
-	move	sp, a0			# set new stack pointer
-
-	move	s0, a1			# save gd in s0
-	move	s2, a2			# save destination address in s2
-
-	li	t0, CONFIG_SYS_MONITOR_BASE
-	sub	s1, s2, t0		# s1 <-- relocation offset
-
-	la	t3, in_ram
-	lw	t2, -12(t3)		# t2 <-- __image_copy_end
-	move	t1, a2
-
-	add	gp, s1			# adjust gp
-
-	/*
-	 * t0 = source address
-	 * t1 = target address
-	 * t2 = source end address
-	 */
-1:
-	lw	t3, 0(t0)
-	sw	t3, 0(t1)
-	addu	t0, 4
-	blt	t0, t2, 1b
-	 addu	t1, 4
-
-	/* If caches were enabled, we would have to flush them here. */
-
-	/* flush d-cache */
-	li	t0, KSEG0
-	addi	t1, t0, CONFIG_SYS_DCACHE_SIZE
-2:
-	cache	INDEX_WRITEBACK_INV_D, 0(t0)
-	bne	t0, t1, 2b
-	 addi	t0, CONFIG_SYS_CACHELINE_SIZE
-
-	sync
-
-	/* flush i-cache */
-	li	t0, KSEG0
-	addi	t1, t0, CONFIG_SYS_ICACHE_SIZE
-3:
-	cache	INDEX_INVALIDATE_I, 0(t0)
-	bne	t0, t1, 3b
-	 addi	t0, CONFIG_SYS_CACHELINE_SIZE
-
-	/* Invalidate BTB */
-	mfc0	t0, CP0_CONFIG, 7
-	nop
-	ori	t0, 2
-	mtc0	t0, CP0_CONFIG, 7
-	nop
-
-	/* Jump to where we've relocated ourselves */
-	addi	t0, s2, in_ram - _start
-	jr	t0
-	 nop
-
-	.word	__rel_dyn_end
-	.word	__rel_dyn_start
-	.word	__image_copy_end
-	.word	_GLOBAL_OFFSET_TABLE_
-	.word	num_got_entries
-
-in_ram:
-	/*
-	 * Now we want to update GOT.
-	 *
-	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
-	 * generated by GNU ld. Skip these reserved entries from relocation.
-	 */
-	lw	t3, -4(t0)		# t3 <-- num_got_entries
-	lw	t8, -8(t0)		# t8 <-- _GLOBAL_OFFSET_TABLE_
-	add	t8, s1			# t8 now holds relocated _G_O_T_
-	addi	t8, t8, 8		# skipping first two entries
-	li	t2, 2
-1:
-	lw	t1, 0(t8)
-	beqz	t1, 2f
-	 add	t1, s1
-	sw	t1, 0(t8)
-2:
-	addi	t2, 1
-	blt	t2, t3, 1b
-	 addi	t8, 4
-
-	/* Update dynamic relocations */
-	lw	t1, -16(t0)		# t1 <-- __rel_dyn_start
-	lw	t2, -20(t0)		# t2 <-- __rel_dyn_end
-
-	b	2f			# skip first reserved entry
-	 addi	t1, 8
-
-1:
-	lw	t8, -4(t1)		# t8 <-- relocation info
-
-	li	t3, 3
-	bne	t8, t3, 2f		# skip non R_MIPS_REL32 entries
-	 nop
-
-	lw	t3, -8(t1)		# t3 <-- location to fix up in FLASH
-
-	lw	t8, 0(t3)		# t8 <-- original pointer
-	add	t8, s1			# t8 <-- adjusted pointer
-
-	add	t3, s1			# t3 <-- location to fix up in RAM
-	sw	t8, 0(t3)
-
-2:
-	blt	t1, t2, 1b
-	 addi	t1, 8			# each rel.dyn entry is 8 bytes
-
-	/*
-	 * Clear BSS
-	 *
-	 * GOT is now relocated. Thus __bss_start and __bss_end can be
-	 * accessed directly via $gp.
-	 */
-	la	t1, __bss_start		# t1 <-- __bss_start
-	la	t2, __bss_end		# t2 <-- __bss_end
-
-1:
-	sw	zero, 0(t1)
-	blt	t1, t2, 1b
-	 addi	t1, 4
-
-	move	a0, s0			# a0 <-- gd
-	la	t9, board_init_r
-	jr	t9
-	 move	a1, s2
-
-	.end	relocate_code
diff --git a/arch/mips/cpu/xburst/timer.c b/arch/mips/cpu/xburst/timer.c
deleted file mode 100644
index 79f34f00c9..0000000000
--- a/arch/mips/cpu/xburst/timer.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (c) 2006
- *  Ingenic Semiconductor, <jlwei@ingenic.cn>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-
-#include <asm/jz4740.h>
-
-#define TIMER_CHAN  0
-#define TIMER_FDATA 0xffff  /* Timer full data value */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	gd->arch.lastinc = readl(&tcu->tcnt0);
-	gd->arch.tbl = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong now = readl(&tcu->tcnt0);
-
-	if (gd->arch.lastinc <= now)
-		gd->arch.tbl += now - gd->arch.lastinc; /* normal mode */
-	else {
-		/* we have an overflow ... */
-		gd->arch.tbl += TIMER_FDATA + now - gd->arch.lastinc;
-	}
-
-	gd->arch.lastinc = now;
-
-	return gd->arch.tbl;
-}
-
-void udelay_masked(unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		if (usec > 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= 1000*1000;
-		} else
-			tmo = 1;
-	}
-
-	endtime = get_timer_masked() + tmo;
-
-	do {
-		ulong now = get_timer_masked();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-int timer_init(void)
-{
-	writel(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0);
-
-	writel(0, &tcu->tcnt0);
-	writel(0, &tcu->tdhr0);
-	writel(TIMER_FDATA, &tcu->tdfr0);
-
-	/* mask irqs */
-	writel((1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)), &tcu->tmsr);
-	writel(1 << TIMER_CHAN, &tcu->tscr); /* enable timer clock */
-	writeb(1 << TIMER_CHAN, &tcu->tesr); /* start counting up */
-
-	gd->arch.lastinc = 0;
-	gd->arch.tbl = 0;
-
-	return 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	gd->arch.tbl = t;
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		if (usec >= 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= 1000 * 1000;
-		} else
-			tmo = 1;
-	}
-
-	/* check for rollover during this delay */
-	tmp = get_timer(0);
-	if ((tmp + tmo) < tmp)
-		reset_timer_masked();  /* timer would roll over */
-	else
-		tmo += tmp;
-
-	while (get_timer_masked() < tmo)
-		;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On MIPS it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On MIPS it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}