Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx

5 files changed, 2 insertions, 67 deletions

diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 41e4e5f1ec..2541400e72 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -28,9 +28,6 @@ config TARGET_EP82XXM
 config TARGET_GW8260
 	bool "Support gw8260"
 
-config TARGET_HYMOD
-	bool "Support hymod"
-
 config TARGET_IPHASE4539
 	bool "Support IPHASE4539"
 
@@ -55,18 +52,9 @@ config TARGET_MPC8266ADS
 config TARGET_VOVPN_GW
 	bool "Support VoVPN-GW"
 
-config TARGET_IDS8247
-	bool "Support IDS8247"
-
 config TARGET_KM82XX
 	bool "Support km82xx"
 
-config TARGET_TQM8260
-	bool "Support TQM8260"
-
-config TARGET_TQM8272
-	bool "Support TQM8272"
-
 endchoice
 
 source "board/atc/Kconfig"
@@ -78,8 +66,6 @@ source "board/ep82xxm/Kconfig"
 source "board/freescale/mpc8266ads/Kconfig"
 source "board/funkwerk/vovpn-gw/Kconfig"
 source "board/gw8260/Kconfig"
-source "board/hymod/Kconfig"
-source "board/ids/ids8247/Kconfig"
 source "board/iphase4539/Kconfig"
 source "board/keymile/km82xx/Kconfig"
 source "board/muas3001/Kconfig"
@@ -87,7 +73,5 @@ source "board/pm826/Kconfig"
 source "board/pm828/Kconfig"
 source "board/ppmc8260/Kconfig"
 source "board/sacsng/Kconfig"
-source "board/tqc/tqm8260/Kconfig"
-source "board/tqc/tqm8272/Kconfig"
 
 endmenu
diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c
index d93a99109f..f9f15b59e5 100644
--- a/arch/powerpc/cpu/mpc8260/ether_fcc.c
+++ b/arch/powerpc/cpu/mpc8260/ether_fcc.c
@@ -645,32 +645,7 @@ eth_loopback_test (void)
 
 	/* 28.9 - (1-2): ioports have been set up already */
 
-#if defined(CONFIG_HYMOD)
-	/*
-	 * Attention: this is board-specific
-	 * 0, FCC1
-	 * 1, FCC2
-	 * 2, FCC3
-	 */
-#       define FCC_START_LOOP 0
-#       define FCC_END_LOOP   2
-
-	/*
-	 * Attention: this is board-specific
-	 * - FCC1 Rx-CLK is CLK10
-	 * - FCC1 Tx-CLK is CLK11
-	 * - FCC2 Rx-CLK is CLK13
-	 * - FCC2 Tx-CLK is CLK14
-	 * - FCC3 Rx-CLK is CLK15
-	 * - FCC3 Tx-CLK is CLK16
-	 */
-
-	/* 28.9 - (3): connect FCC's tx and rx clocks */
-	immr->im_cpmux.cmx_uar = 0;
-	immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
-	    CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
-	    CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SACSng)
+#if defined(CONFIG_SACSng)
 	/*
 	 * Attention: this is board-specific
 	 * 1, FCC2
diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c
index 30125a7a73..41d2c04c85 100644
--- a/arch/powerpc/cpu/mpc8260/interrupts.c
+++ b/arch/powerpc/cpu/mpc8260/interrupts.c
@@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	immr->im_intctl.ic_sipnrh = 0xffffffff;
 	immr->im_intctl.ic_sipnrl = 0xffffffff;
 
-#ifdef CONFIG_HYMOD
-	/*
-	 * ensure all external interrupt sources default to trigger on
-	 * high-to-low transition (i.e. edge triggered active low)
-	 */
-	immr->im_intctl.ic_siexr = -1;
-#endif
-
-	return (0);
+	return 0;
 }
 
 /****************************************************************************/
diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c
index 0a47fdc1d3..f7bb05d204 100644
--- a/arch/powerpc/cpu/mpc8260/pci.c
+++ b/arch/powerpc/cpu/mpc8260/pci.c
@@ -262,8 +262,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
 				  | SIUMCR_CS10PC00
 				  | SIUMCR_BCTLC00
 				  | SIUMCR_MMR11;
-#elif defined(CONFIG_TQM8272)
-/* nothing to do for this Board here */
 #else
 	/*
 	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index d7eaf13e0b..5f1e174ec8 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -48,9 +48,6 @@
 	GOT_ENTRY(__init_end)
 	GOT_ENTRY(__bss_end)
 	GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
-	GOT_ENTRY(environment)
-#endif
 	END_GOT
 
 /*
@@ -878,18 +875,7 @@ clear_bss:
 	 * Now clear BSS segment
 	 */
 	lwz	r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
-	/*
-	 * For HYMOD - the environment is the very last item in flash.
-	 * The real .bss stops just before environment starts, so only
-	 * clear up to that point.
-	 *
-	 * taken from mods for FADS board
-	 */
-	lwz	r4,GOT(environment)
-#else
 	lwz	r4,GOT(__bss_end)
-#endif
 
 	cmplw	0, r3, r4
 	beq	6f