board_f: Rename initdram() to dram_init()

This allows us to use the same DRAM init function on all archs. Add a
dummy function for arc, which does not use DRAM init here.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Dummy function on nios2]
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 5 insertions, 5 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 87fd5e65e0..ffc62a5849 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -403,20 +403,20 @@ static unsigned char spd_read(uchar chip, uint addr)
 }
 
 /*-----------------------------------------------------------------------------+
- * initdram.  Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * dram_init.  Initializes the 440SP Memory Queue and DDR SDRAM controller.
  * Note: This routine runs from flash with a stack set up in the chip's
  * sram space.  It is important that the routine does not require .sbss, .bss or
  * .data sections.  It also cannot call routines that require these sections.
  *-----------------------------------------------------------------------------*/
 /*-----------------------------------------------------------------------------
- * Function:	 initdram
+ * Function:	 dram_init
  * Description:  Configures SDRAM memory banks for DDR operation.
  *		 Auto Memory Configuration option reads the DDR SDRAM EEPROMs
  *		 via the IIC bus and then configures the DDR SDRAM memory
  *		 banks appropriately. If Auto Memory Configuration is
  *		 not used, it is assumed that no DIMM is plugged
  *-----------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
 {
 	unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
 	unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
@@ -2855,13 +2855,13 @@ static void test(void)
 #else /* CONFIG_SPD_EEPROM */
 
 /*-----------------------------------------------------------------------------
- * Function:	initdram
+ * Function:	dram_init
  * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
  * 		The configuration is performed using static, compile-
  *		time parameters.
  * 		Configures the PPC405EX(r) and PPC460EX/GT
  *---------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
 {
 	unsigned long val;