powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 180 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/dcr.S b/arch/powerpc/cpu/ppc4xx/dcr.S
deleted file mode 100644
index 6b13528c9a..0000000000
--- a/arch/powerpc/cpu/ppc4xx/dcr.S
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <config.h>
-
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
-#include <asm/ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define _ASMLANGUAGE
-
-/*****************************************************************************
- *
- *  XXX - DANGER
- *        These routines make use of self modifying code.  DO NOT CALL THEM
- *	  UNTIL THEY ARE RELOCATED TO RAM.  Additionally, I do not
- *	  recommend them for use in anything other than an interactive
- *        debugging environment.  This is mainly due to performance reasons.
- *
- ****************************************************************************/
-
-/*
- * static void _create_MFDCR(unsigned short dcrn)
- *
- * Builds a 'mfdcr' instruction for get_dcr
- * function.
- */
-		.section ".text"
-		.align 2
-		.type	 _create_MFDCR,@function
-_create_MFDCR:
-		/*
-		 * Build up a 'mfdcr' instruction formatted as follows:
-		 *
-		 *  OPCD |   RT   |    DCRF      |     XO       | CR |
-		 * ---------------|--------------|--------------|----|
-		 * 0   5 | 6   10 | 11        20 | 21        30 | 31 |
-		 *       |        |    DCRN      |              |    |
-		 *   31  |  %r3   | (5..9|0..4)  |      323     |  0 |
-		 *
-		 * Where:
-		 *	OPCD = opcode - 31
-		 *	RT   = destination register - %r3 return register
-		 *	DCRF = DCRN # with upper and lower halves swapped
-		 *	XO   = extended opcode - 323
-		 *	CR   = CR[CR0] NOT undefined - 0
-		 */
-		rlwinm	r0, r3, 27, 27, 31	/* OPCD = 31 */
-		rlwinm	r3, r3, 5, 22, 26
-		or	r3, r3, r0
-		slwi	r3, r3, 10
-		oris	r3, r3, 0x3e30		/* RT = %r3 */
-		ori	r3, r3, 323		/* XO = 323 */
-		slwi	r3, r3, 1		/* CR = 0 */
-
-		mflr	r4
-		stw	r3, 0(r4)		/* Store instr in get_dcr() */
-		dcbst	r0, r4			/* Make sure val is written out */
-		sync				/* Wait for write to complete */
-		icbi	r0, r4			/* Make sure old instr is dumped */
-		isync				/* Wait for icbi to complete */
-
-		blr
-.Lfe1:		.size	 _create_MFDCR,.Lfe1-_create_MFDCR
-/* end _create_MFDCR() */
-
-/*
- * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
- *
- * Builds a 'mtdcr' instruction for set_dcr
- * function.
- */
-		.section ".text"
-		.align 2
-		.type	 _create_MTDCR,@function
-_create_MTDCR:
-		/*
-		 * Build up a 'mtdcr' instruction formatted as follows:
-		 *
-		 *  OPCD |   RS   |    DCRF      |     XO       | CR |
-		 * ---------------|--------------|--------------|----|
-		 * 0   5 | 6   10 | 11        20 | 21        30 | 31 |
-		 *       |        |    DCRN      |              |    |
-		 *   31  |  %r3   | (5..9|0..4)  |      451     |  0 |
-		 *
-		 * Where:
-		 *	OPCD = opcode - 31
-		 *	RS   = source register - %r4
-		 *	DCRF = dest. DCRN # with upper and lower halves swapped
-		 *	XO   = extended opcode - 451
-		 *	CR   = CR[CR0] NOT undefined - 0
-		 */
-		rlwinm	r0, r3, 27, 27, 31	/* OPCD = 31 */
-		rlwinm	r3, r3, 5, 22, 26
-		or	r3, r3, r0
-		slwi	r3, r3, 10
-		oris	r3, r3, 0x3e40		/* RS = %r4 */
-		ori	r3, r3, 451		/* XO = 451 */
-		slwi	r3, r3, 1		/* CR = 0 */
-
-		mflr	r5
-		stw	r3, 0(r5)		/* Store instr in set_dcr() */
-		dcbst	r0, r5			/* Make sure val is written out */
-		sync				/* Wait for write to complete */
-		icbi	r0, r5			/* Make sure old instr is dumped */
-		isync				/* Wait for icbi to complete */
-
-		blr
-.Lfe2:		.size	 _create_MTDCR,.Lfe2-_create_MTDCR
-/* end _create_MTDCR() */
-
-
-/*
- * unsigned long get_dcr(unsigned short dcrn)
- *
- * Return a given DCR's value.
- */
-		/* */
-		/* XXX - This is self modifying code, hence */
-		/* it is in the data section. */
-		/* */
-		.section ".data"
-		.align	2
-		.globl	get_dcr
-		.type	get_dcr,@function
-get_dcr:
-		mflr	r0			/* Get link register */
-		stwu	r1, -32(r1)		/* Save back chain and move SP */
-		stw	r0, +36(r1)		/* Save link register */
-
-		bl	_create_MFDCR		/* Build following instruction */
-		/* XXX - we build this instuction up on the fly. */
-		.long	0			/* Get DCR's value */
-
-		lwz	r0, +36(r1)		/* Get saved link register */
-		mtlr	r0			/* Restore link register */
-		addi	r1, r1, +32		/* Remove frame from stack */
-		blr				/* Return to calling function */
-.Lfe3:		.size	get_dcr,.Lfe3-get_dcr
-/* end get_dcr() */
-
-
-/*
- * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
- *
- * Return a given DCR's value.
- */
-		/*
-		 * XXX - This is self modifying code, hence
-		 * it is in the data section.
-		 */
-		.section ".data"
-		.align	2
-		.globl	set_dcr
-		.type	set_dcr,@function
-set_dcr:
-		mflr	r0			/* Get link register */
-		stwu	r1, -32(r1)		/* Save back chain and move SP */
-		stw	r0, +36(r1)		/* Save link register */
-
-		bl	_create_MTDCR		/* Build following instruction */
-		/* XXX - we build this instuction up on the fly. */
-		.long	0			/* Set DCR's value */
-
-		lwz	r0, +36(r1)		/* Get saved link register */
-		mtlr	r0			/* Restore link register */
-		addi	r1, r1, +32		/* Remove frame from stack */
-		blr				/* Return to calling function */
-.Lfe4:		.size	set_dcr,.Lfe4-set_dcr
-/* end set_dcr() */
-#endif