Merge branch 'master' of git://git.denx.de/u-boot-arm into master

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>

6 files changed, 8 insertions, 242 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index fe928db039..f8d03cba2d 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -49,7 +49,6 @@
 		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
 	} while (0)
 
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 static void update_rdcc(void)
 {
 	u32 val;
@@ -72,7 +71,6 @@ static void update_rdcc(void)
 		}
 	}
 }
-#endif
 
 #if defined(CONFIG_440)
 /*
@@ -101,7 +99,6 @@ void dcbz_area(u32 start_address, u32 num_bytes);
 
 #define MULDIV64(m1, m2, d)	(u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
 
-#if !defined(CONFIG_NAND_SPL)
 /*-----------------------------------------------------------------------------+
  * sdram_memsize
  *-----------------------------------------------------------------------------*/
@@ -217,7 +214,6 @@ void board_add_ram_info(int use_default)
 	val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
 	printf(", CL%d)", val);
 }
-#endif /* !CONFIG_NAND_SPL */
 
 #if defined(CONFIG_SPD_EEPROM)
 
@@ -2843,16 +2839,6 @@ static void test(void)
  *---------------------------------------------------------------------------*/
 phys_size_t initdram(int board_type)
 {
-	/*
-	 * Only run this SDRAM init code once. For NAND booting
-	 * targets like Kilauea, we call initdram() early from the
-	 * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
-	 * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
-	 * which calls initdram() again. This time the controller
-	 * mustn't be reconfigured again since we're already running
-	 * from SDRAM.
-	 */
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 	unsigned long val;
 
 #if defined(CONFIG_440)
@@ -2969,12 +2955,10 @@ phys_size_t initdram(int board_type)
 #endif
 
 #if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 	/*------------------------------------------------------------------
 	 | DQS calibration.
 	 +-----------------------------------------------------------------*/
 	DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
 #endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
 
 	/*
@@ -3009,13 +2993,10 @@ phys_size_t initdram(int board_type)
 	set_mcsr(get_mcsr());
 #endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
 
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-
 	return (CONFIG_SYS_MBYTES_SDRAM << 20);
 }
 #endif /* CONFIG_SPD_EEPROM */
 
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #if defined(CONFIG_440)
 u32 mfdcr_any(u32 dcr)
 {
@@ -3062,7 +3043,6 @@ void mtdcr_any(u32 dcr, u32 val)
 	}
 }
 #endif /* defined(CONFIG_440) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) &&  !defined(CONFIG_NAND_SPL) */
 
 inline void ppc4xx_ibm_ddr2_register_dump(void)
 {
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 82823147fe..67f149deef 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -27,12 +27,6 @@
 
 #include "ecc.h"
 
-/*
- * Only compile the DDR auto-calibration code for NOR boot and
- * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
- */
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-
 #define MAXBXCF			4
 #define SDRAM_RXBAS_SHIFT_1M	20
 
@@ -1231,9 +1225,3 @@ u32 DQS_autocalibration(void)
 
 	return 0;
 }
-#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-u32 DQS_autocalibration(void)
-{
-	return 0;
-}
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index 14b520ff9c..4b792ae2d2 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -14,11 +14,7 @@ obj-y	+= kgdb.o
 
 obj-y	+= 40x_spd_sdram.o
 
-ifndef CONFIG_NAND_SPL
-ifndef CONFIG_NAND_U_BOOT
 obj-y	+= 44x_spd_ddr.o
-endif
-endif
 obj-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
 obj-$(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) += 4xx_ibm_ddr2_autocalib.o
 obj-y	+= 4xx_pci.o
diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk
index 71c2a6c729..102f069f9e 100644
--- a/arch/powerpc/cpu/ppc4xx/config.mk
+++ b/arch/powerpc/cpu/ppc4xx/config.mk
@@ -7,8 +7,8 @@
 
 PLATFORM_CPPFLAGS += -DCONFIG_4xx -mstring -msoft-float
 
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
+cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is440:=$(shell grep CONFIG_440 $(srctree)/include/$(cfg))
 
 ifneq (,$(findstring CONFIG_440,$(is440)))
 PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index e72c37c75b..11b55d5a56 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -182,16 +182,13 @@
 
 
 	.extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
-	.extern reconfig_tlb0
-#endif
 
 /*
  * Set up GOT: Global Offset Table
  *
  * Use r12 to access the GOT
  */
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_SPL_BUILD)
 	START_GOT
 	GOT_ENTRY(_GOT2_TABLE_)
 	GOT_ENTRY(_FIXUP_TABLE_)
@@ -205,22 +202,7 @@
 	GOT_ENTRY(__bss_end)
 	GOT_ENTRY(__bss_start)
 	END_GOT
-#endif /* CONFIG_NAND_SPL */
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \
-	!defined(CONFIG_SPL_BUILD)
-	/*
-	 * NAND U-Boot image is started from offset 0
-	 */
-	.text
-#if defined(CONFIG_440)
-	bl	reconfig_tlb0
-#endif
-	GET_GOT
-	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
-	bl	board_init_f
-	/* NOTREACHED - board_init_f() does not return */
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD)
 	/*
@@ -255,9 +237,7 @@
  */
 
 #if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
     .section .bootpg,"ax"
-#endif
     .globl _start_440
 
 /**************************************************************************/
@@ -511,7 +491,7 @@ tlbnx2:	addi	r4,r4,1		/* Next TLB */
  * r3 - 1st arg to board_init(): IMMP pointer
  * r4 - 2nd arg to board_init(): boot flag
  */
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_SPL_BUILD)
 	.text
 	.long	0x27051956		/* U-Boot Magic Number			*/
 	.globl	version_string
@@ -777,9 +757,6 @@ _start:
 	stwu	r1,-8(r1)		/* Save back chain and move SP */
 	stw	r0,+12(r1)		/* Save return addr (underflow vect) */
 
-#ifdef CONFIG_NAND_SPL
-	bl	nand_boot_common	/* will not return */
-#else
 #ifndef CONFIG_SPL_BUILD
 	GET_GOT
 #endif
@@ -787,7 +764,6 @@ _start:
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 	bl	board_init_f
 	/* NOTREACHED - board_init_f() does not return */
-#endif
 
 #endif /* CONFIG_440 */
 
@@ -1050,9 +1026,6 @@ _start:
 	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
 #endif /* CONFIG_SYS_INIT_DCACHE_CS */
 
-#ifdef CONFIG_NAND_SPL
-	bl	nand_boot_common	/* will not return */
-#else
 	GET_GOT			/* initialize GOT access			*/
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
@@ -1060,13 +1033,11 @@ _start:
 	bl	board_init_f	/* run first part of init code (from Flash)	*/
 	/* NOTREACHED - board_init_f() does not return */
 
-#endif /* CONFIG_NAND_SPL */
-
 #endif	/* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */
 	/*----------------------------------------------------------------------- */
 
 
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_SPL_BUILD)
 /*
  * This code finishes saving the registers to the exception frame
  * and jumps to the appropriate handler for the exception.
@@ -1632,7 +1603,7 @@ __440_msr_continue:
 	blr
 	function_epilog(dcbz_area)
 #endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_SPL_BUILD */
 
 /*------------------------------------------------------------------------------- */
 /* Function:	 in8 */
@@ -1981,75 +1952,3 @@ pll_wait:
 	blr
 	function_epilog(mftlb1)
 #endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
-	mr	r6,r3
-	mr	r7,r4
-	mflr	r8
-
-	/*
-	 * Copy SPL from icache into SDRAM
-	 */
-	subi	r3,r3,4
-	subi	r4,r4,4
-	srwi	r5,r5,2
-	mtctr	r5
-..spl_loop:
-	lwzu	r0,4(r4)
-	stwu	r0,4(r3)
-	bdnz	..spl_loop
-
-	/*
-	 * Calculate "corrected" link register, so that we "continue"
-	 * in execution in destination range
-	 */
-	sub	r3,r7,r6	/* r3 = src - dst */
-	sub	r8,r8,r3	/* r8 = link-reg - (src - dst) */
-	mtlr	r8
-	blr
-
-nand_boot_common:
-	/*
-	 * First initialize SDRAM. It has to be available *before* calling
-	 * nand_boot().
-	 */
-	lis	r3,CONFIG_SYS_SDRAM_BASE@h
-	ori	r3,r3,CONFIG_SYS_SDRAM_BASE@l
-	bl	initdram
-
-	/*
-	 * Now copy the 4k SPL code into SDRAM and continue execution
-	 * from there.
-	 */
-	lis	r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
-	ori	r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
-	lis	r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
-	ori	r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
-	lis	r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
-	ori	r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
-	bl	nand_boot_relocate
-
-	/*
-	 * We're running from SDRAM now!!!
-	 *
-	 * It is necessary for 4xx systems to relocate from running at
-	 * the original location (0xfffffxxx) to somewhere else (SDRAM
-	 * preferably). This is because CS0 needs to be reconfigured for
-	 * NAND access. And we can't reconfigure this CS when currently
-	 * "running" from it.
-	 */
-
-	/*
-	 * Finally call nand_boot() to load main NAND U-Boot image from
-	 * NAND and jump to it.
-	 */
-	bl	nand_boot		/* will not return */
-#endif /* CONFIG_NAND_SPL */
diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.c b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
index fafc15e2e1..d1e78f6b0c 100644
--- a/arch/powerpc/cpu/ppc4xx/usb_ohci.c
+++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.c
@@ -847,104 +847,7 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
  * Virtual Root Hub
  *-------------------------------------------------------------------------*/
 
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
-	0x12,	    /*	__u8  bLength; */
-	0x01,	    /*	__u8  bDescriptorType; Device */
-	0x10,	    /*	__u16 bcdUSB; v1.1 */
-	0x01,
-	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  bDeviceSubClass; */
-	0x00,	    /*	__u8  bDeviceProtocol; */
-	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
-	0x00,	    /*	__u16 idVendor; */
-	0x00,
-	0x00,	    /*	__u16 idProduct; */
-	0x00,
-	0x00,	    /*	__u16 bcdDevice; */
-	0x00,
-	0x00,	    /*	__u8  iManufacturer; */
-	0x01,	    /*	__u8  iProduct; */
-	0x00,	    /*	__u8  iSerialNumber; */
-	0x01	    /*	__u8  bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
-	0x09,	    /*	__u8  bLength; */
-	0x02,	    /*	__u8  bDescriptorType; Configuration */
-	0x19,	    /*	__u16 wTotalLength; */
-	0x00,
-	0x01,	    /*	__u8  bNumInterfaces; */
-	0x01,	    /*	__u8  bConfigurationValue; */
-	0x00,	    /*	__u8  iConfiguration; */
-	0x40,	    /*	__u8  bmAttributes;
-		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
-	0x00,	    /*	__u8  MaxPower; */
-
-	/* interface */
-	0x09,	    /*	__u8  if_bLength; */
-	0x04,	    /*	__u8  if_bDescriptorType; Interface */
-	0x00,	    /*	__u8  if_bInterfaceNumber; */
-	0x00,	    /*	__u8  if_bAlternateSetting; */
-	0x01,	    /*	__u8  if_bNumEndpoints; */
-	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  if_bInterfaceSubClass; */
-	0x00,	    /*	__u8  if_bInterfaceProtocol; */
-	0x00,	    /*	__u8  if_iInterface; */
-
-	/* endpoint */
-	0x07,	    /*	__u8  ep_bLength; */
-	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
-	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
-	0x02,	    /*	__u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
-	0x00,
-	0xff	    /*	__u8  ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
-	0x04,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	0x09,			/*  __u8  lang ID */
-	0x04,			/*  __u8  lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
-	28,			/*  __u8  bLength; */
-	0x03,			/*  __u8  bDescriptorType; String-descriptor */
-	'O',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'C',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'I',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'R',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'o',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	't',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	' ',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'H',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'u',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-	'b',			/*  __u8  Unicode */
-	0,				/*  __u8  Unicode */
-};
+#include <usbroothubdes.h>
 
 /* Hub class-specific descriptor is constructed dynamically */