mpc83xx: Introduce ARCH_MPC831*

Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options.

Signed-off-by: Mario Six <mario.six@gdsys.cc>

6 files changed, 42 insertions, 27 deletions

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 142b924786..20780ba68b 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -17,6 +17,7 @@ config TARGET_SBC8349
 
 config TARGET_VE8313
 	bool "Support ve8313"
+	select ARCH_MPC8313
 
 config TARGET_VME8349
 	bool "Support vme8349"
@@ -28,11 +29,13 @@ config TARGET_MPC8308RDB
 
 config TARGET_MPC8313ERDB
 	bool "Support MPC8313ERDB"
+	select ARCH_MPC8313
 	select BOARD_EARLY_INIT_F
 	select SUPPORT_SPL
 
 config TARGET_MPC8315ERDB
 	bool "Support MPC8315ERDB"
+	select ARCH_MPC8315
 	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8323ERDB
@@ -65,6 +68,7 @@ config TARGET_MPC837XERDB
 
 config TARGET_IDS8313
 	bool "Support ids8313"
+	select ARCH_MPC8313
 	select DM
 	imply CMD_DM
 
@@ -113,6 +117,17 @@ config ARCH_MPC8309
 	bool
 	select ARCH_MPC830X
 
+config ARCH_MPC831X
+	bool
+
+config ARCH_MPC8313
+	bool
+	select ARCH_MPC831X
+
+config ARCH_MPC8315
+	bool
+	select ARCH_MPC831X
+
 source "board/esd/vme8349/Kconfig"
 source "board/freescale/mpc8308rdb/Kconfig"
 source "board/freescale/mpc8313erdb/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index b29f271e9b..8a88068fdb 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -18,7 +18,7 @@
 #include <tsec.h>
 #include <netdev.h>
 #include <fsl_esdhc.h>
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_ARCH_MPC831X)
 #include <linux/immap_qe.h>
 #include <asm/io.h>
 #endif
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 1555205e06..7d8d5516b4 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -240,7 +240,7 @@ void cpu_init_f (volatile immap_t * im)
 
 	/* System General Purpose Register */
 #ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
+#if defined(CONFIG_MPC834x) || defined(CONFIG_ARCH_MPC8313)
 	/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
 	__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
 		     &im->sysconf.sicrh);
@@ -312,7 +312,7 @@ void cpu_init_f (volatile immap_t * im)
 	im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
 	im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
 #endif
-#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x)
+#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_ARCH_MPC831X)
 	uint32_t temp;
 	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
 
diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c
index 0ecafd708f..cfd391b78a 100644
--- a/arch/powerpc/cpu/mpc83xx/fdt.c
+++ b/arch/powerpc/cpu/mpc83xx/fdt.c
@@ -16,7 +16,7 @@ extern void ft_qe_setup(void *blob);
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT) && \
-	(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+	(defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
 #include <linux/immap_qe.h>
 
 void fdt_fixup_muram (void *blob)
@@ -52,7 +52,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
     defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
     defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
-#ifdef CONFIG_MPC8313
+#ifdef CONFIG_ARCH_MPC8313
 	/*
 	* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
 	* h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
@@ -123,7 +123,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT) && \
-	(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+	(defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
 	fdt_fixup_muram (blob);
 #endif
 }
diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
index 97ef77121b..3f18aadf19 100644
--- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c
+++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c
@@ -31,7 +31,7 @@ void board_add_ram_info(int use_default)
 	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
 			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
 
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
 	if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_16)
 		puts(", 16-bit");
 	else if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_32)
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index d537af5130..9f09d2955f 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -85,7 +85,7 @@ int get_clocks(void)
 	u32 lcrr;
 
 	u32 csb_clk;
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
@@ -101,7 +101,7 @@ int get_clocks(void)
 #if !defined(CONFIG_MPC832x)
 	u32 i2c2_clk;
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	u32 tdm_clk;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
@@ -122,12 +122,12 @@ int get_clocks(void)
 	u32 qe_clk;
 	u32 brg_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC837x)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
 	u32 sata_clk;
 #endif
 
@@ -155,7 +155,7 @@ int get_clocks(void)
 
 	sccr = im->clk.sccr;
 
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
@@ -176,7 +176,7 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
 	case 0:
@@ -197,7 +197,7 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC8315) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
 	case 0:
@@ -216,7 +216,7 @@ int get_clocks(void)
 		/* unknown SCCR_TSEC2CM value */
 		return -4;
 	}
-#elif defined(CONFIG_MPC8313)
+#elif defined(CONFIG_ARCH_MPC8313)
 	tsec2_clk = tsec1_clk;
 
 	if (!(sccr & SCCR_TSEC1ON))
@@ -291,7 +291,7 @@ int get_clocks(void)
 		return -8;
 	}
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
 	case 0:
 		tdm_clk = 0;
@@ -317,7 +317,7 @@ int get_clocks(void)
 	i2c1_clk = csb_clk;
 #elif defined(CONFIG_MPC832x)
 	i2c1_clk = enc_clk;
-#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x)
+#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
 	i2c1_clk = enc_clk;
 #elif defined(CONFIG_FSL_ESDHC)
 	i2c1_clk = sdhc_clk;
@@ -330,7 +330,7 @@ int get_clocks(void)
 	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
 #endif
 
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC837x)
 	switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
 	case 0:
@@ -369,7 +369,7 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
 	switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
 	case 0:
 		sata_clk = 0;
@@ -448,7 +448,7 @@ int get_clocks(void)
 #endif
 
 	gd->arch.csb_clk = csb_clk;
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	gd->arch.tsec1_clk = tsec1_clk;
 	gd->arch.tsec2_clk = tsec2_clk;
@@ -459,7 +459,7 @@ int get_clocks(void)
 #if defined(CONFIG_MPC834x)
 	gd->arch.usbmph_clk = usbmph_clk;
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	gd->arch.tdm_clk = tdm_clk;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
@@ -483,12 +483,12 @@ int get_clocks(void)
 	gd->arch.qe_clk = qe_clk;
 	gd->arch.brg_clk = brg_clk;
 #endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC837x)
 	gd->arch.pciexp1_clk = pciexp1_clk;
 	gd->arch.pciexp2_clk = pciexp2_clk;
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
 	gd->arch.sata_clk = sata_clk;
 #endif
 	gd->pci_clk = pci_sync_in;
@@ -550,7 +550,7 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  I2C2:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.i2c2_clk));
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	printf("  TDM:                 %-4s MHz\n",
 	       strmhz(buf, gd->arch.tdm_clk));
 #endif
@@ -558,7 +558,7 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  SDHC:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sdhc_clk));
 #endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	printf("  TSEC1:               %-4s MHz\n",
 	       strmhz(buf, gd->arch.tsec1_clk));
@@ -574,14 +574,14 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  USB MPH:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.usbmph_clk));
 #endif
-#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_MPC831x) || \
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
 	defined(CONFIG_MPC837x)
 	printf("  PCIEXP1:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.pciexp1_clk));
 	printf("  PCIEXP2:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.pciexp2_clk));
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_MPC837x) || defined(CONFIG_ARCH_MPC8315)
 	printf("  SATA:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sata_clk));
 #endif