arch/powerpc/lib/board.c: make (mostly) checkpatch-clean

CodingStyle cleanup.

Accepted (in this cleanup) checkpatch messages:

- externs should be avoided
  (to be cleaned up later)
- no spaces at the start of a line
  (accepted in multi-line #if's)
- Macros with complex values
  (false reports)
- do not use assignment in if condition
  (accepted in one place, where avoiding it would have required an
  additional level of nesting, resulting in less readable code)

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 234 insertions, 221 deletions

diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 3a1b3756e1..35992aed90 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2010
+ * (C) Copyright 2000-2011
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -88,7 +88,7 @@
 #endif
 
 #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
-extern int update_flash_size (int flash_size);
+extern int update_flash_size(int flash_size);
 #endif
 
 #if defined(CONFIG_SC3)
@@ -96,7 +96,7 @@ extern void sc3_read_eeprom(void);
 #endif
 
 #if defined(CONFIG_CMD_DOC)
-void doc_init (void);
+void doc_init(void);
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
@@ -130,9 +130,8 @@ ulong monitor_flash_len;
 #include <bedbug/type.h>
 #endif
 
-/************************************************************************
- * Utilities								*
- ************************************************************************
+/*
+ * Utilities
  */
 
 /*
@@ -147,16 +146,16 @@ ulong monitor_flash_len;
  * argument, and returns an integer return code, where 0 means
  * "continue" and != 0 means "fatal error, hang the system".
  */
-typedef int (init_fnc_t) (void);
+typedef int (init_fnc_t)(void);
 
-/************************************************************************
- * Init Utilities							*
- ************************************************************************
+/*
+ * Init Utilities
+ *
  * Some of this code should be moved into the core functions,
  * but let's get it working (again) first...
  */
 
-static int init_baudrate (void)
+static int init_baudrate(void)
 {
 	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
 	return 0;
@@ -168,7 +167,9 @@ void __board_add_ram_info(int use_default)
 {
 	/* please define platform specific board_add_ram_info() */
 }
-void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
+
+void board_add_ram_info(int)
+	__attribute__ ((weak, alias("__board_add_ram_info")));
 
 int __board_flash_wp_on(void)
 {
@@ -179,80 +180,86 @@ int __board_flash_wp_on(void)
 	 */
 	return 0;
 }
-int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on")));
+
+int board_flash_wp_on(void)
+	__attribute__ ((weak, alias("__board_flash_wp_on")));
 
 void __cpu_secondary_init_r(void)
 {
 }
+
 void cpu_secondary_init_r(void)
-__attribute__((weak, alias("__cpu_secondary_init_r")));
+	__attribute__ ((weak, alias("__cpu_secondary_init_r")));
 
-static int init_func_ram (void)
+static int init_func_ram(void)
 {
 #ifdef	CONFIG_BOARD_TYPES
 	int board_type = gd->board_type;
 #else
 	int board_type = 0;	/* use dummy arg */
 #endif
-	puts ("DRAM:  ");
+	puts("DRAM:  ");
 
-	if ((gd->ram_size = initdram (board_type)) > 0) {
-		print_size (gd->ram_size, "");
+	gd->ram_size = initdram(board_type);
+
+	if (gd->ram_size > 0) {
+		print_size(gd->ram_size, "");
 		board_add_ram_info(0);
 		putc('\n');
-		return (0);
+		return 0;
 	}
-	puts (failed);
-	return (1);
+	puts(failed);
+	return 1;
 }
 
 /***********************************************************************/
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
-static int init_func_i2c (void)
+static int init_func_i2c(void)
 {
-	puts ("I2C:   ");
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	puts ("ready\n");
-	return (0);
+	puts("I2C:   ");
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	puts("ready\n");
+	return 0;
 }
 #endif
 
 #if defined(CONFIG_HARD_SPI)
-static int init_func_spi (void)
+static int init_func_spi(void)
 {
-	puts ("SPI:   ");
-	spi_init ();
-	puts ("ready\n");
-	return (0);
+	puts("SPI:   ");
+	spi_init();
+	puts("ready\n");
+	return 0;
 }
 #endif
 
 /***********************************************************************/
 
 #if defined(CONFIG_WATCHDOG)
-static int init_func_watchdog_init (void)
+static int init_func_watchdog_init(void)
 {
-	puts ("       Watchdog enabled\n");
-	WATCHDOG_RESET ();
-	return (0);
+	puts("       Watchdog enabled\n");
+	WATCHDOG_RESET();
+	return 0;
 }
-# define INIT_FUNC_WATCHDOG_INIT	init_func_watchdog_init,
 
-static int init_func_watchdog_reset (void)
+#define INIT_FUNC_WATCHDOG_INIT	init_func_watchdog_init,
+
+static int init_func_watchdog_reset(void)
 {
-	WATCHDOG_RESET ();
-	return (0);
+	WATCHDOG_RESET();
+	return 0;
 }
-# define INIT_FUNC_WATCHDOG_RESET	init_func_watchdog_reset,
+
+#define INIT_FUNC_WATCHDOG_RESET	init_func_watchdog_reset,
 #else
-# define INIT_FUNC_WATCHDOG_INIT	/* undef */
-# define INIT_FUNC_WATCHDOG_RESET	/* undef */
+#define INIT_FUNC_WATCHDOG_INIT		/* undef */
+#define INIT_FUNC_WATCHDOG_RESET	/* undef */
 #endif /* CONFIG_WATCHDOG */
 
-/************************************************************************
- * Initialization sequence						*
- ************************************************************************
+/*
+ * Initialization sequence
  */
 
 init_fnc_t *init_sequence[] = {
@@ -280,8 +287,10 @@ init_fnc_t *init_sequence[] = {
 #endif
 	env_init,
 #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
-	get_clocks_866,		/* get CPU and bus clocks according to the environment variable */
-	sdram_adjust_866,	/* adjust sdram refresh rate according to the new clock */
+	/* get CPU and bus clocks according to the environment variable */
+	get_clocks_866,
+	/* adjust sdram refresh rate according to the new clock */
+	sdram_adjust_866,
 	init_timebase,
 #endif
 	init_baudrate,
@@ -317,14 +326,12 @@ init_fnc_t *init_sequence[] = {
 #ifdef CONFIG_POST
 	post_init_f,
 #endif
-	INIT_FUNC_WATCHDOG_RESET
-	init_func_ram,
+	INIT_FUNC_WATCHDOG_RESET init_func_ram,
 #if defined(CONFIG_SYS_DRAM_TEST)
 	testdram,
 #endif /* CONFIG_SYS_DRAM_TEST */
 	INIT_FUNC_WATCHDOG_RESET
-
-	NULL,			/* Terminate this list */
+	NULL,	/* Terminate this list */
 };
 
 ulong get_effective_memsize(void)
@@ -334,12 +341,11 @@ ulong get_effective_memsize(void)
 #else
 	/* limit stack to what we can reasonable map */
 	return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
-		 CONFIG_MAX_MEM_MAPPED : gd->ram_size);
+		CONFIG_MAX_MEM_MAPPED : gd->ram_size);
 #endif
 }
 
-/************************************************************************
- *
+/*
  * This is the first part of the initialization sequence that is
  * implemented in C, but still running from ROM.
  *
@@ -350,8 +356,6 @@ ulong get_effective_memsize(void)
  *
  * Be aware of the restrictions: global data is read-only, BSS is not
  * initialized, and stack space is limited to a few kB.
- *
- ************************************************************************
  */
 
 #ifdef CONFIG_LOGBUFFER
@@ -361,13 +365,14 @@ unsigned long logbuffer_base(void)
 }
 #endif
 
-void board_init_f (ulong bootflag)
+void board_init_f(ulong bootflag)
 {
 	bd_t *bd;
 	ulong len, addr, addr_sp;
 	ulong *s;
 	gd_t *id;
 	init_fnc_t **init_fnc_ptr;
+
 #ifdef CONFIG_PRAM
 	ulong reg;
 #endif
@@ -375,20 +380,18 @@ void board_init_f (ulong bootflag)
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
+	__asm__ __volatile__("":::"memory");
 
 #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
     !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
     !defined(CONFIG_MPC86xx)
 	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
+	memset((void *) gd, 0, sizeof(gd_t));
 #endif
 
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr) () != 0) {
-			hang ();
-		}
-	}
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr)
+		if ((*init_fnc_ptr) () != 0)
+			hang();
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
@@ -432,7 +435,7 @@ void board_init_f (ulong bootflag)
 	 */
 	if (addr > determine_mp_bootpg()) {
 		addr = determine_mp_bootpg();
-		debug ("Reserving MP boot page to %08lx\n", addr);
+		debug("Reserving MP boot page to %08lx\n", addr);
 	}
 #endif
 
@@ -440,7 +443,8 @@ void board_init_f (ulong bootflag)
 #ifndef CONFIG_ALT_LB_ADDR
 	/* reserve kernel log buffer */
 	addr -= (LOGBUFF_RESERVE);
-	debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
+	debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+	      addr);
 #endif
 #endif
 
@@ -449,27 +453,27 @@ void board_init_f (ulong bootflag)
 	 * reserve protected RAM
 	 */
 	reg = getenv_ulong("pram", 10, CONFIG_PRAM);
-	addr -= (reg << 10);		/* size is in kB */
+	addr -= (reg << 10);	/* size is in kB */
 	debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
 #endif /* CONFIG_PRAM */
 
 	/* round down to next 4 kB limit */
 	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+	debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
 
 #ifdef CONFIG_LCD
 #ifdef CONFIG_FB_ADDR
 	gd->fb_base = CONFIG_FB_ADDR;
 #else
 	/* reserve memory for LCD display (always full pages) */
-	addr = lcd_setmem (addr);
+	addr = lcd_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_FB_ADDR */
 #endif /* CONFIG_LCD */
 
 #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
 	/* reserve memory for video display (always full pages) */
-	addr = video_setmem (addr);
+	addr = video_setmem(addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_VIDEO  */
 
@@ -484,29 +488,29 @@ void board_init_f (ulong bootflag)
 	addr &= ~(65536 - 1);
 #endif
 
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+	debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
 
 	/*
 	 * reserve memory for malloc() arena
 	 */
 	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
-			TOTAL_MALLOC_LEN >> 10, addr_sp);
+	debug("Reserving %dk for malloc() at: %08lx\n",
+	      TOTAL_MALLOC_LEN >> 10, addr_sp);
 
 	/*
 	 * (permanently) allocate a Board Info struct
 	 * and a permanent copy of the "global" data
 	 */
-	addr_sp -= sizeof (bd_t);
+	addr_sp -= sizeof(bd_t);
 	bd = (bd_t *) addr_sp;
 	memset(bd, 0, sizeof(bd_t));
 	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
-			sizeof (bd_t), addr_sp);
-	addr_sp -= sizeof (gd_t);
+	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+	      sizeof(bd_t), addr_sp);
+	addr_sp -= sizeof(gd_t);
 	id = (gd_t *) addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
-			sizeof (gd_t), addr_sp);
+	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
+	      sizeof(gd_t), addr_sp);
 
 	/*
 	 * Finally, we set up a new (bigger) stack.
@@ -516,22 +520,22 @@ void board_init_f (ulong bootflag)
 	 */
 	addr_sp -= 16;
 	addr_sp &= ~0xF;
-	s = (ulong *)addr_sp;
+	s = (ulong *) addr_sp;
 	*s-- = 0;
 	*s-- = 0;
-	addr_sp = (ulong)s;
-	debug ("Stack Pointer at: %08lx\n", addr_sp);
+	addr_sp = (ulong) s;
+	debug("Stack Pointer at: %08lx\n", addr_sp);
 
 	/*
 	 * Save local variables to board info struct
 	 */
 
-	bd->bi_memstart  = CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory	*/
-	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
+	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;	/* start of memory */
+	bd->bi_memsize = gd->ram_size;			/* size in bytes */
 
 #ifdef CONFIG_SYS_SRAM_BASE
-	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;	/* start of  SRAM memory	*/
-	bd->bi_sramsize  = CONFIG_SYS_SRAM_SIZE;	/* size  of  SRAM memory	*/
+	bd->bi_sramstart = CONFIG_SYS_SRAM_BASE;	/* start of SRAM */
+	bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;		/* size  of SRAM */
 #endif
 
 #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
@@ -546,33 +550,34 @@ void board_init_f (ulong bootflag)
 #endif
 #if defined(CONFIG_MPC8220)
 	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-	bd->bi_inpfreq   = gd->inp_clk;
-	bd->bi_pcifreq   = gd->pci_clk;
-	bd->bi_vcofreq   = gd->vco_clk;
-	bd->bi_pevfreq   = gd->pev_clk;
-	bd->bi_flbfreq   = gd->flb_clk;
+	bd->bi_inpfreq = gd->inp_clk;
+	bd->bi_pcifreq = gd->pci_clk;
+	bd->bi_vcofreq = gd->vco_clk;
+	bd->bi_pevfreq = gd->pev_clk;
+	bd->bi_flbfreq = gd->flb_clk;
 
 	/* store bootparam to sram (backward compatible), here? */
 	{
-		u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
+		u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE;
+
 		*sram++ = gd->ram_size;
 		*sram++ = gd->bus_clk;
 		*sram++ = gd->inp_clk;
 		*sram++ = gd->cpu_clk;
 		*sram++ = gd->vco_clk;
 		*sram++ = gd->flb_clk;
-		*sram++ = 0xb8c3ba11;  /* boot signature */
+		*sram++ = 0xb8c3ba11;	/* boot signature */
 	}
 #endif
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
 	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
 #if defined(CONFIG_CPM2)
 	bd->bi_cpmfreq = gd->cpm_clk;
 	bd->bi_brgfreq = gd->brg_clk;
 	bd->bi_sccfreq = gd->scc_clk;
-	bd->bi_vco     = gd->vco_out;
+	bd->bi_vco = gd->vco_out;
 #endif /* CONFIG_CPM2 */
 #if defined(CONFIG_MPC512X)
 	bd->bi_ipsfreq = gd->ips_clk;
@@ -584,47 +589,46 @@ void board_init_f (ulong bootflag)
 	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
 #ifdef CONFIG_SYS_EXTBDINFO
-	strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
-	strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
+	strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
+	strncpy((char *) bd->bi_r_version, U_BOOT_VERSION,
+		sizeof(bd->bi_r_version));
 
 	bd->bi_procfreq = gd->cpu_clk;	/* Processor Speed, In Hz */
 	bd->bi_plb_busfreq = gd->bus_clk;
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-	bd->bi_pci_busfreq = get_PCI_freq ();
-	bd->bi_opbfreq = get_OPB_freq ();
+	bd->bi_pci_busfreq = get_PCI_freq();
+	bd->bi_opbfreq = get_OPB_freq();
 #elif defined(CONFIG_XILINX_405)
-	bd->bi_pci_busfreq = get_PCI_freq ();
+	bd->bi_pci_busfreq = get_PCI_freq();
 #endif
 #endif
 
-	debug ("New Stack Pointer is: %08lx\n", addr_sp);
+	debug("New Stack Pointer is: %08lx\n", addr_sp);
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
-	gd->relocaddr = addr; /* Record relocation address, useful for debug */
+	gd->relocaddr = addr;	/* Store relocation addr, useful for debug */
 
-	memcpy (id, (void *)gd, sizeof (gd_t));
+	memcpy(id, (void *) gd, sizeof(gd_t));
 
-	relocate_code (addr_sp, id, addr);
+	relocate_code(addr_sp, id, addr);
 
 	/* NOTREACHED - relocate_code() does not return */
 }
 
-/************************************************************************
- *
+/*
  * This is the next part if the initialization sequence: we are now
  * running from RAM and have a "normal" C environment, i. e. global
  * data can be written, BSS has been cleared, the stack size in not
  * that critical any more, etc.
- *
- ************************************************************************
  */
-void board_init_r (gd_t *id, ulong dest_addr)
+void board_init_r(gd_t *id, ulong dest_addr)
 {
 	bd_t *bd;
 	ulong malloc_start;
+
 #if defined(CONFIG_SYS_FLASH_CHECKSUM) || defined(CONFIG_CMD_NET)
 	char *s;
 #endif
@@ -663,38 +667,38 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	serial_initialize();
 #endif
 
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 	/*
 	 * Setup trap handlers
 	 */
-	trap_init (dest_addr);
+	trap_init(dest_addr);
 
 #ifdef CONFIG_ADDR_MAP
 	init_addr_map();
 #endif
 
 #if defined(CONFIG_BOARD_EARLY_INIT_R)
-	board_early_init_r ();
+	board_early_init_r();
 #endif
 
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 #ifdef CONFIG_LOGBUFFER
-	logbuff_init_ptrs ();
+	logbuff_init_ptrs();
 #endif
 #ifdef CONFIG_POST
-	post_output_backlog ();
+	post_output_backlog();
 #endif
 
 	WATCHDOG_RESET();
 
 #if defined(CONFIG_SYS_DELAYED_ICACHE)
-	icache_enable ();	/* it's time to enable the instruction cache */
+	icache_enable();	/* it's time to enable the instruction cache */
 #endif
 
 #if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
@@ -706,85 +710,89 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 * Do early PCI configuration _before_ the flash gets initialised,
 	 * because PCU ressources are crucial for flash access on some boards.
 	 */
-	pci_init ();
+	pci_init();
 #endif
 #if defined(CONFIG_WINBOND_83C553)
 	/*
 	 * Initialise the ISA bridge
 	 */
-	initialise_w83c553f ();
+	initialise_w83c553f();
 #endif
 
-	asm ("sync ; isync");
+	asm("sync ; isync");
 
-	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
+	mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN);
 
 #if !defined(CONFIG_SYS_NO_FLASH)
-	puts ("Flash: ");
+	puts("Flash: ");
 
 	if (board_flash_wp_on()) {
 		printf("Uninitialized - Write Protect On\n");
 		/* Since WP is on, we can't find real size.  Set to 0 */
 		flash_size = 0;
-	} else if ((flash_size = flash_init ()) > 0) {
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
+	} else if ((flash_size = flash_init()) > 0) {
+#ifdef CONFIG_SYS_FLASH_CHECKSUM
 		char *s;
 
-		print_size (flash_size, "");
+		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		s = getenv ("flashchecksum");
+		s = getenv("flashchecksum");
 		if (s && (*s == 'y')) {
-			printf ("  CRC: %08X",
-				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
-			);
+			printf("  CRC: %08X",
+			       crc32(0,
+				     (const unsigned char *)
+				     CONFIG_SYS_FLASH_BASE, flash_size)
+				);
 		}
-		putc ('\n');
-# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size (flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
+		putc('\n');
+#else  /* !CONFIG_SYS_FLASH_CHECKSUM */
+		print_size(flash_size, "\n");
+#endif /* CONFIG_SYS_FLASH_CHECKSUM */
 	} else {
-		puts (failed);
-		hang ();
+		puts(failed);
+		hang();
 	}
 
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;	/* update start of FLASH memory    */
-	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
+	/* update start of FLASH memory    */
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+	/* size of FLASH memory (final value) */
+	bd->bi_flashsize = flash_size;
 
 #if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
 	/* Make a update of the Memctrl. */
-	update_flash_size (flash_size);
+	update_flash_size(flash_size);
 #endif
 
 
-# if defined(CONFIG_OXC) || defined(CONFIG_RMU)
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
 	/* flash mapped at end of memory map */
 	bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
-# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
-	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for startup monitor  */
-# endif
+#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for monitor */
+#endif
 #endif /* !CONFIG_SYS_NO_FLASH */
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 	/* initialize higher level parts of CPU like time base and timers */
-	cpu_init_r ();
+	cpu_init_r();
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 #ifdef CONFIG_SPI
-# if !defined(CONFIG_ENV_IS_IN_EEPROM)
-	spi_init_f ();
-# endif
-	spi_init_r ();
+#if !defined(CONFIG_ENV_IS_IN_EEPROM)
+	spi_init_f();
+#endif
+	spi_init_r();
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-	WATCHDOG_RESET ();
-	puts ("NAND:  ");
+	WATCHDOG_RESET();
+	puts("NAND:  ");
 	nand_init();		/* go init the NAND */
 #endif
 
@@ -794,13 +802,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
  * Thus It is required that operations like pin multiplexer
  * be put in board_init.
  */
-	WATCHDOG_RESET ();
-	puts ("MMC:  ");
-	mmc_initialize (bd);
+	WATCHDOG_RESET();
+	puts("MMC:  ");
+	mmc_initialize(bd);
 #endif
 
 	/* relocate environment function pointers etc. */
-	env_relocate ();
+	env_relocate();
 
 	/*
 	 * after non-volatile devices & environment is setup and cpu code have
@@ -826,21 +834,22 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 * "i2cfast" into account
 	 */
 	{
-		char *s = getenv ("i2cfast");
+		char *s = getenv("i2cfast");
+
 		if (s && ((*s == 'y') || (*s == 'Y'))) {
 			bd->bi_iic_fast[0] = 1;
 			bd->bi_iic_fast[1] = 1;
 		}
 	}
-#endif	/* CONFIG_I2CFAST */
-#endif	/* CONFIG_405GP, CONFIG_405EP */
-#endif	/* CONFIG_SYS_EXTBDINFO */
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CONFIG_SYS_EXTBDINFO */
 
 #if defined(CONFIG_SC3)
 	sc3_read_eeprom();
 #endif
 
-#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
+#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
 	mac_read_from_eeprom();
 #endif
 
@@ -872,60 +881,60 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_CMD_NET */
 
 	/* IP Address */
-	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 #if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
 	/*
 	 * Do pci configuration
 	 */
-	pci_init ();
+	pci_init();
 #endif
 
 /** leave this here (after malloc(), environment and PCI are working) **/
 	/* Initialize stdio devices */
-	stdio_init ();
+	stdio_init();
 
 	/* Initialize the jump table for applications */
-	jumptable_init ();
+	jumptable_init();
 
 #if defined(CONFIG_API)
 	/* Initialize API */
-	api_init ();
+	api_init();
 #endif
 
 	/* Initialize the console (after the relocation and devices init) */
-	console_init_r ();
+	console_init_r();
 
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
+	misc_init_r();
 #endif
 
 #ifdef	CONFIG_HERMES
 	if (bd->bi_ethspeed != 0xFFFF)
-		hermes_start_lxt980 ((int) bd->bi_ethspeed);
+		hermes_start_lxt980((int) bd->bi_ethspeed);
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-	WATCHDOG_RESET ();
-	puts ("KGDB:  ");
-	kgdb_init ();
+	WATCHDOG_RESET();
+	puts("KGDB:  ");
+	kgdb_init();
 #endif
 
-	debug ("U-Boot relocated to %08lx\n", dest_addr);
+	debug("U-Boot relocated to %08lx\n", dest_addr);
 
 	/*
 	 * Enable Interrupts
 	 */
-	interrupt_init ();
+	interrupt_init();
 
 #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-	status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 
-	udelay (20);
+	udelay(20);
 
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
@@ -938,74 +947,74 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	}
 #endif
 
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 
 #if defined(CONFIG_CMD_SCSI)
-	WATCHDOG_RESET ();
-	puts ("SCSI:  ");
-	scsi_init ();
+	WATCHDOG_RESET();
+	puts("SCSI:  ");
+	scsi_init();
 #endif
 
 #if defined(CONFIG_CMD_DOC)
-	WATCHDOG_RESET ();
-	puts ("DOC:   ");
-	doc_init ();
+	WATCHDOG_RESET();
+	puts("DOC:   ");
+	doc_init();
 #endif
 
 #ifdef CONFIG_BITBANGMII
 	bb_miiphy_init();
 #endif
 #if defined(CONFIG_CMD_NET)
-	WATCHDOG_RESET ();
-	puts ("Net:   ");
-	eth_initialize (bd);
+	WATCHDOG_RESET();
+	puts("Net:   ");
+	eth_initialize(bd);
 #endif
 
 #if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
-	WATCHDOG_RESET ();
-	debug ("Reset Ethernet PHY\n");
-	reset_phy ();
+	WATCHDOG_RESET();
+	debug("Reset Ethernet PHY\n");
+	reset_phy();
 #endif
 
 #ifdef CONFIG_POST
-	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	post_run(NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
 #if defined(CONFIG_CMD_PCMCIA) \
     && !defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET ();
-	puts ("PCMCIA:");
-	pcmcia_init ();
+	WATCHDOG_RESET();
+	puts("PCMCIA:");
+	pcmcia_init();
 #endif
 
 #if defined(CONFIG_CMD_IDE)
-	WATCHDOG_RESET ();
-# ifdef	CONFIG_IDE_8xx_PCCARD
-	puts ("PCMCIA:");
-# else
-	puts ("IDE:   ");
+	WATCHDOG_RESET();
+#ifdef	CONFIG_IDE_8xx_PCCARD
+	puts("PCMCIA:");
+#else
+	puts("IDE:   ");
 #endif
 #if defined(CONFIG_START_IDE)
 	if (board_start_ide())
-		ide_init ();
+		ide_init();
 #else
-	ide_init ();
+	ide_init();
 #endif
 #endif
 
 #ifdef CONFIG_LAST_STAGE_INIT
-	WATCHDOG_RESET ();
+	WATCHDOG_RESET();
 	/*
 	 * Some parts can be only initialized if all others (like
 	 * Interrupts) are up and running (i.e. the PC-style ISA
 	 * keyboard).
 	 */
-	last_stage_init ();
+	last_stage_init();
 #endif
 
 #if defined(CONFIG_CMD_BEDBUG)
-	WATCHDOG_RESET ();
-	bedbug_init ();
+	WATCHDOG_RESET();
+	bedbug_init();
 #endif
 
 #if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
@@ -1023,46 +1032,49 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #ifdef CONFIG_LOGBUFFER
 #ifndef CONFIG_ALT_LB_ADDR
 		/* Also take the logbuffer into account (pram is in kB) */
-		pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
+		pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
 #endif
 #endif
-		sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
-		setenv ("mem", (char *)memsz);
+		sprintf((char *) memsz, "%ldk",
+			(bd->bi_memsize / 1024) - pram);
+		setenv("mem", (char *) memsz);
 	}
 #endif
 
 #ifdef CONFIG_PS2KBD
-	puts ("PS/2:  ");
+	puts("PS/2:  ");
 	kbd_init();
 #endif
 
 #ifdef CONFIG_MODEM_SUPPORT
- {
-	 extern int do_mdm_init;
-	 do_mdm_init = gd->do_mdm_init;
- }
+	{
+		extern int do_mdm_init;
+
+		do_mdm_init = gd->do_mdm_init;
+	}
 #endif
 
 	/* Initialization complete - start the monitor */
 
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {
-		WATCHDOG_RESET ();
-		main_loop ();
+		WATCHDOG_RESET();
+		main_loop();
 	}
 
 	/* NOTREACHED - no way out of command loop except booting */
 }
 
-void hang (void)
+void hang(void)
 {
-	puts ("### ERROR ### Please RESET the board ###\n");
+	puts("### ERROR ### Please RESET the board ###\n");
 	show_boot_progress(-30);
-	for (;;);
+	for (;;)
+		;
 }
 
 
-#if 0 /* We could use plain global data, but the resulting code is bigger */
+#if 0	/* We could use plain global data, but the resulting code is bigger */
 /*
  * Pointer to initial global data area
  *
@@ -1070,7 +1082,8 @@ void hang (void)
  */
 #undef	XTRN_DECLARE_GLOBAL_DATA_PTR
 #define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-#endif  /* 0 */
+DECLARE_GLOBAL_DATA_PTR =
+	(gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+#endif /* 0 */
 
 /************************************************************************/