mpc8260: remove MPC8266ADS board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Rune Torgersen <runet@innovsys.com>

2 files changed, 2 insertions, 59 deletions

diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 15742d9b08..d9dba83d5c 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -34,9 +34,6 @@ config TARGET_PM826
 config TARGET_PM828
 	bool "Support PM828"
 
-config TARGET_MPC8266ADS
-	bool "Support MPC8266ADS"
-
 config TARGET_KM82XX
 	bool "Support km82xx"
 
@@ -46,7 +43,6 @@ source "board/atc/Kconfig"
 source "board/cpu86/Kconfig"
 source "board/cpu87/Kconfig"
 source "board/ep82xxm/Kconfig"
-source "board/freescale/mpc8266ads/Kconfig"
 source "board/gw8260/Kconfig"
 source "board/iphase4539/Kconfig"
 source "board/keymile/km82xx/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8260/pci.c b/arch/powerpc/cpu/mpc8260/pci.c
index f7bb05d204..079b6e60d4 100644
--- a/arch/powerpc/cpu/mpc8260/pci.c
+++ b/arch/powerpc/cpu/mpc8260/pci.c
@@ -22,7 +22,7 @@
 #include <fdt_support.h>
 #endif
 
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
+#if defined CONFIG_PM826
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
@@ -236,34 +236,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
 			    CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);
 
 	/*
-	 * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
-	 */
-#ifdef CONFIG_MPC8266ADS
-	immap->im_siu_conf.sc_siumcr =
-		(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
-		| SIUMCR_LBPC01;
-#elif defined CONFIG_MPC8272
-	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
-				  ~SIUMCR_BBD &
-				  ~SIUMCR_ESE &
-				  ~SIUMCR_PBSE &
-				  ~SIUMCR_CDIS &
-				  ~SIUMCR_DPPC11 &
-				  ~SIUMCR_L2CPC11 &
-				  ~SIUMCR_LBPC11 &
-				  ~SIUMCR_APPC11 &
-				  ~SIUMCR_CS10PC11 &
-				  ~SIUMCR_BCTLC11 &
-				  ~SIUMCR_MMR11)
-				  | SIUMCR_DPPC11
-				  | SIUMCR_L2CPC01
-				  | SIUMCR_LBPC00
-				  | SIUMCR_APPC10
-				  | SIUMCR_CS10PC00
-				  | SIUMCR_BCTLC00
-				  | SIUMCR_MMR11;
-#else
-	/*
 	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
 	 * and local bus for PCI (SIUMCR [LBPC]).
 	 */
@@ -274,7 +246,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
 					SIUMCR_LBPC01 |
 					SIUMCR_CS10PC01 |
 					SIUMCR_APPC10;
-#endif
 
 	/* Make PCI lowest priority */
 	/* Each 4 bits is a device bus request	and the MS 4bits
@@ -304,24 +275,11 @@ void pci_mpc8250_init (struct pci_controller *hose)
 	immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
 	immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
 
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
-	immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
-	immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
-#endif
-
 	/* Release PCI RST (by default the PCI RST signal is held low)	*/
 	immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
 
 	/* give it some time */
 	{
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
-		/* Give the PCI cards more time to initialize before query
-		   This might be good for other boards also
-		 */
-		int i;
-
-		for (i = 0; i < 1000; ++i)
-#endif
 			udelay (1000);
 	}
 
@@ -358,11 +316,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
 	immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB);	/* Size & attribute */
 
 	/* See above for description - puts PCI request as highest priority */
-#ifdef CONFIG_MPC8272
-	immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
-#else
 	immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
-#endif
 
 	/* Park the bus on the PCI */
 	immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
@@ -388,7 +342,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
 	hose->last_busno = 0xff;
 
 	/* System memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
+#if defined CONFIG_PM826
 	pci_set_region (hose->regions + 0,
 			PCI_SLV_MEM_BUS,
 			PCI_SLV_MEM_LOCAL,
@@ -401,17 +355,10 @@ void pci_mpc8250_init (struct pci_controller *hose)
 #endif
 
 	/* PCI memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
-	pci_set_region (hose->regions + 1,
-			PCI_MSTR_MEMIO_BUS,
-			PCI_MSTR_MEMIO_LOCAL,
-			PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
-#else
 	pci_set_region (hose->regions + 1,
 			PCI_MSTR_MEM_BUS,
 			PCI_MSTR_MEM_LOCAL,
 			PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
-#endif
 
 	/* PCI I/O space */
 	pci_set_region (hose->regions + 2,