ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 193 insertions, 0 deletions

diff --git a/arch/ppc/cpu/mpc512x/serial.c b/arch/ppc/cpu/mpc512x/serial.c
new file mode 100644
index 0000000000..ec2f41bb36
--- /dev/null
+++ b/arch/ppc/cpu/mpc512x/serial.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2000 - 2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Based ont the MPC5200 PSC driver.
+ * Adapted for MPC512x by Jan Wrobel <wrr@semihalf.com>
+ */
+
+/*
+ * Minimal serial functions needed to use one of the PSC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_PSC_CONSOLE)
+
+static void fifo_init (volatile psc512x_t *psc)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+
+	/* reset Rx & Tx fifo slice */
+	out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE);
+	out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE);
+
+	/* disable Tx & Rx FIFO interrupts */
+	out_be32(&psc->rfintmask, 0);
+	out_be32(&psc->tfintmask, 0);
+
+	out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16));
+	out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16));
+
+	/* enable Tx & Rx FIFO slice */
+	out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE);
+	out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE);
+
+	out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE);
+	__asm__ volatile ("sync");
+}
+
+void serial_setbrg(void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+	unsigned long baseclk, div;
+
+	/* calculate dividor for setting PSC CTUR and CTLR registers */
+	baseclk = (gd->ips_clk + 8) / 16;
+	div = (baseclk + (gd->baudrate / 2)) / gd->baudrate;
+
+	out_8(&psc->ctur, (div >> 8) & 0xff);
+	out_8(&psc->ctlr,  div & 0xff); /* set baudrate */
+}
+
+int serial_init(void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	fifo_init (psc);
+
+	/* set MR register to point to MR1 */
+	out_8(&psc->command, PSC_SEL_MODE_REG_1);
+
+	/* disable Tx/Rx */
+	out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE);
+
+	/* choose the prescaler	by 16 for the Tx/Rx clock generation */
+	out_be16(&psc->psc_clock_select, 0xdd00);
+
+	/* switch to UART mode */
+	out_be32(&psc->sicr, 0);
+
+	/* mode register points to mr1 */
+	/* configure parity, bit length and so on in mode register 1*/
+	out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
+	/* now, mode register points to mr2 */
+	out_8(&psc->mode, PSC_MODE_1_STOPBIT);
+
+	/* set baudrate */
+	serial_setbrg();
+
+	/* disable all interrupts */
+	out_be16(&psc->psc_imr, 0);
+
+	/* reset and enable Rx/Tx */
+	out_8(&psc->command, PSC_RST_RX);
+	out_8(&psc->command, PSC_RST_TX);
+	out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
+
+	return 0;
+}
+
+void serial_putc (const char c)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	if (c == '\n')
+		serial_putc ('\r');
+
+	/* Wait for last character to go. */
+	while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
+		;
+
+	out_8(&psc->tfdata_8, c);
+}
+
+void serial_putc_raw (const char c)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	/* Wait for last character to go. */
+	while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
+		;
+
+	out_8(&psc->tfdata_8, c);
+}
+
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+int serial_getc (void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	/* Wait for a character to arrive. */
+	while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY)
+		;
+
+	return in_8(&psc->rfdata_8);
+}
+
+int serial_tstc (void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY);
+}
+
+void serial_setrts(int s)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	if (s) {
+		/* Assert RTS (become LOW) */
+		out_8(&psc->op1, 0x1);
+	}
+	else {
+		/* Negate RTS (become HIGH) */
+		out_8(&psc->op0, 0x1);
+	}
+}
+
+int serial_getcts(void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
+
+	return (in_8(&psc->ip) & 0x1) ? 0 : 1;
+}
+#endif /* CONFIG_PSC_CONSOLE */