ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 560 insertions, 0 deletions

diff --git a/arch/ppc/cpu/mpc8xx/spi.c b/arch/ppc/cpu/mpc8xx/spi.c
new file mode 100644
index 0000000000..b2ac23e5ea
--- /dev/null
+++ b/arch/ppc/cpu/mpc8xx/spi.c
@@ -0,0 +1,560 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ *	<nboppuri@trinetcommunication.com>,
+ *	<pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC8xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <serial.h>
+
+#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
+
+/* Warning:
+ * You cannot enable DEBUG for early system initalization, i. e. when
+ * this driver is used to read environment parameters like "baudrate"
+ * from EEPROM which are used to initialize the serial port which is
+ * needed to print the debug messages...
+ */
+#undef	DEBUG
+
+#define SPI_EEPROM_WREN		0x06
+#define SPI_EEPROM_RDSR		0x05
+#define SPI_EEPROM_READ		0x03
+#define SPI_EEPROM_WRITE	0x02
+
+/* ---------------------------------------------------------------
+ * Offset for initial SPI buffers in DPRAM:
+ * We need a 520 byte scratch DPRAM area to use at an early stage.
+ * It is used between the two initialization calls (spi_init_f()
+ * and spi_init_r()).
+ * The value 0xb00 makes it far enough from the start of the data
+ * area (as well as from the stack pointer).
+ * --------------------------------------------------------------- */
+#ifndef	CONFIG_SYS_SPI_INIT_OFFSET
+#define	CONFIG_SYS_SPI_INIT_OFFSET	0xB00
+#endif
+
+#ifdef	DEBUG
+
+#define	DPRINT(a)	printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+	return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+	int i;
+	unsigned char *pc = (unsigned char *) pv;
+
+	for (i = 0; i < num; i++)
+		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+	printf ("\t");
+	for (i = 0; i < num; i++)
+		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+	printf ("\n");
+}
+#else	/* !DEBUG */
+
+#define	DPRINT(a)
+
+#endif	/* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+/* -------------------
+ * Variables
+ * ------------------- */
+
+#define MAX_BUFFER	0x104
+
+/* ----------------------------------------------------------------------
+ * Initially we place the RX and TX buffers at a fixed location in DPRAM!
+ * ---------------------------------------------------------------------- */
+static uchar *rxbuf =
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+			[CONFIG_SYS_SPI_INIT_OFFSET];
+static uchar *txbuf =
+  (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
+			[CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_f
+ *
+ *  Description: Init SPI-Controller (ROM part)
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_f (void)
+{
+	unsigned int dpaddr;
+
+	volatile spi_t *spi;
+	volatile immap_t *immr;
+	volatile cpic8xx_t *cpi;
+	volatile cpm8xx_t *cp;
+	volatile iop8xx_t *iop;
+	volatile cbd_t *tbdf, *rbdf;
+
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	cpi  = (cpic8xx_t *)&immr->im_cpic;
+	iop  = (iop8xx_t *) &immr->im_ioport;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+/* 1 */
+	/* ------------------------------------------------
+	 * Initialize Port B SPI pins -> page 34-8 MPC860UM
+	 * (we are only in Master Mode !)
+	 * ------------------------------------------------ */
+
+	/* --------------------------------------------
+	 * GPIO or per. Function
+	 * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
+	 * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
+	 * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
+	 * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
+	 * -------------------------------------------- */
+	cp->cp_pbpar |=  0x0000000E;	/* set  bits	*/
+	cp->cp_pbpar &= ~0x00000001;	/* reset bit	*/
+
+	/* ----------------------------------------------
+	 * In/Out or per. Function 0/1
+	 * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
+	 * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
+	 * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
+	 * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
+	 * ---------------------------------------------- */
+	cp->cp_pbdir |= 0x0000000F;
+
+	/* ----------------------------------------------
+	 * open drain or active output
+	 * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
+	 * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
+	 * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
+	 * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
+	 * ---------------------------------------------- */
+
+	cp->cp_pbodr |=  0x00000008;
+	cp->cp_pbodr &= ~0x00000007;
+
+	/* Initialize the parameter ram.
+	 * We need to make sure many things are initialized to zero
+	 */
+	spi->spi_rstate	= 0;
+	spi->spi_rdp	= 0;
+	spi->spi_rbptr	= 0;
+	spi->spi_rbc	= 0;
+	spi->spi_rxtmp	= 0;
+	spi->spi_tstate	= 0;
+	spi->spi_tdp	= 0;
+	spi->spi_tbptr	= 0;
+	spi->spi_tbc	= 0;
+	spi->spi_txtmp	= 0;
+
+	/* Allocate space for one transmit and one receive buffer
+	 * descriptor in the DP ram
+	 */
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
+#else
+	dpaddr = CPM_SPI_BASE;
+#endif
+
+/* 3 */
+	/* Set up the SPI parameters in the parameter ram */
+	spi->spi_rbase = dpaddr;
+	spi->spi_tbase = dpaddr + sizeof (cbd_t);
+
+	/***********IMPORTANT******************/
+
+	/*
+	 * Setting transmit and receive buffer descriptor pointers
+	 * initially to rbase and tbase. Only the microcode patches
+	 * documentation talks about initializing this pointer. This
+	 * is missing from the sample I2C driver. If you dont
+	 * initialize these pointers, the kernel hangs.
+	 */
+	spi->spi_rbptr = spi->spi_rbase;
+	spi->spi_tbptr = spi->spi_tbase;
+
+/* 4 */
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+	/*
+	 *  Initialize required parameters if using microcode patch.
+	 */
+	spi->spi_rstate = 0;
+	spi->spi_tstate = 0;
+#else
+	/* Init SPI Tx + Rx Parameters */
+	while (cp->cp_cpcr & CPM_CR_FLG)
+		;
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+	while (cp->cp_cpcr & CPM_CR_FLG)
+		;
+#endif	/* CONFIG_SYS_SPI_UCODE_PATCH */
+
+/* 5 */
+	/* Set SDMA configuration register */
+	immr->im_siu_conf.sc_sdcr = 0x0001;
+
+/* 6 */
+	/* Set to big endian. */
+	spi->spi_tfcr = SMC_EB;
+	spi->spi_rfcr = SMC_EB;
+
+/* 7 */
+	/* Set maximum receive size. */
+	spi->spi_mrblr = MAX_BUFFER;
+
+/* 8 + 9 */
+	/* tx and rx buffer descriptors */
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	tbdf->cbd_sc &= ~BD_SC_READY;
+	rbdf->cbd_sc &= ~BD_SC_EMPTY;
+
+	/* Set the bd's rx and tx buffer address pointers */
+	rbdf->cbd_bufaddr = (ulong) rxbuf;
+	tbdf->cbd_bufaddr = (ulong) txbuf;
+
+/* 10 + 11 */
+	cp->cp_spim = 0;			/* Mask  all SPI events */
+	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
+
+	return;
+}
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_r
+ *
+ *  Description: Init SPI-Controller (RAM part) -
+ *		 The malloc engine is ready and we can move our buffers to
+ *		 normal RAM
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+	volatile cpm8xx_t *cp;
+	volatile spi_t *spi;
+	volatile immap_t *immr;
+	volatile cbd_t *tbdf, *rbdf;
+
+	immr = (immap_t *)  CONFIG_SYS_IMMR;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+	/* tx and rx buffer descriptors */
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	/* Allocate memory for RX and TX buffers */
+	rxbuf = (uchar *) malloc (MAX_BUFFER);
+	txbuf = (uchar *) malloc (MAX_BUFFER);
+
+	rbdf->cbd_bufaddr = (ulong) rxbuf;
+	tbdf->cbd_bufaddr = (ulong) txbuf;
+
+	return;
+}
+
+/****************************************************************************
+ *  Function:    spi_write
+ **************************************************************************** */
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i;
+
+	memset(rxbuf, 0, MAX_BUFFER);
+	memset(txbuf, 0, MAX_BUFFER);
+	*txbuf = SPI_EEPROM_WREN;		/* write enable		*/
+	spi_xfer(1);
+	memcpy(txbuf, addr, alen);
+	*txbuf = SPI_EEPROM_WRITE;		/* WRITE memory array	*/
+	memcpy(alen + txbuf, buffer, len);
+	spi_xfer(alen + len);
+						/* ignore received data	*/
+	for (i = 0; i < 1000; i++) {
+		*txbuf = SPI_EEPROM_RDSR;	/* read status		*/
+		txbuf[1] = 0;
+		spi_xfer(2);
+		if (!(rxbuf[1] & 1)) {
+			break;
+		}
+		udelay(1000);
+	}
+	if (i >= 1000) {
+		printf ("*** spi_write: Time out while writing!\n");
+	}
+
+	return len;
+}
+
+/****************************************************************************
+ *  Function:    spi_read
+ **************************************************************************** */
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	memset(rxbuf, 0, MAX_BUFFER);
+	memset(txbuf, 0, MAX_BUFFER);
+	memcpy(txbuf, addr, alen);
+	*txbuf = SPI_EEPROM_READ;		/* READ memory array	*/
+
+	/*
+	 * There is a bug in 860T (?) that cuts the last byte of input
+	 * if we're reading into DPRAM. The solution we choose here is
+	 * to always read len+1 bytes (we have one extra byte at the
+	 * end of the buffer).
+	 */
+	spi_xfer(alen + len + 1);
+	memcpy(buffer, alen + rxbuf, len);
+
+	return len;
+}
+
+/****************************************************************************
+ *  Function:    spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+	volatile immap_t *immr;
+	volatile cpm8xx_t *cp;
+	volatile spi_t *spi;
+	cbd_t *tbdf, *rbdf;
+	ushort loop;
+	int tm;
+
+	DPRINT (("*** spi_xfer entered ***\n"));
+
+	immr = (immap_t *) CONFIG_SYS_IMMR;
+	cp   = (cpm8xx_t *) &immr->im_cpm;
+
+#ifdef CONFIG_SYS_SPI_UCODE_PATCH
+	spi  = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
+#else
+	spi  = (spi_t *)&cp->cp_dparam[PROFF_SPI];
+	/* Disable relocation */
+	spi->spi_rpbase = 0;
+#endif
+
+	tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
+	rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
+
+	/* Set CS for device */
+	cp->cp_pbdat &= ~0x0001;
+
+	/* Setting tx bd status and data length */
+	tbdf->cbd_sc  = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
+	tbdf->cbd_datlen = count;
+
+	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
+							tbdf->cbd_datlen));
+
+	/* Setting rx bd status and data length */
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+	rbdf->cbd_datlen = 0;	 /* rx length has no significance */
+
+	loop = cp->cp_spmode & SPMODE_LOOP;
+	cp->cp_spmode = /*SPMODE_DIV16	|*/	/* BRG/16 mode not used here */
+			loop		|
+			SPMODE_REV	|
+			SPMODE_MSTR	|
+			SPMODE_EN	|
+			SPMODE_LEN(8)	|	/* 8 Bits per char */
+			SPMODE_PM(0x8) ;	/* medium speed */
+	cp->cp_spim = 0;			/* Mask  all SPI events */
+	cp->cp_spie = SPI_EMASK;		/* Clear all SPI events	*/
+
+	/* start spi transfer */
+	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+	cp->cp_spcom |= SPI_STR;		/* Start transmit */
+
+	/* --------------------------------
+	 * Wait for SPI transmit to get out
+	 * or time out (1 second = 1000 ms)
+	 * -------------------------------- */
+	for (tm=0; tm<1000; ++tm) {
+		if (cp->cp_spie & SPI_TXB) {	/* Tx Buffer Empty */
+			DPRINT (("*** spi_xfer: Tx buffer empty\n"));
+			break;
+		}
+		if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
+			DPRINT (("*** spi_xfer: Tx BD done\n"));
+			break;
+		}
+		udelay (1000);
+	}
+	if (tm >= 1000) {
+		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+	}
+	DPRINT (("*** spi_xfer: ... transfer ended\n"));
+
+#ifdef	DEBUG
+	printf ("\nspi_xfer: txbuf after xfer\n");
+	memdump ((void *) txbuf, 16);	/* dump of txbuf before transmit */
+	printf ("spi_xfer: rxbuf after xfer\n");
+	memdump ((void *) rxbuf, 16);	/* dump of rxbuf after transmit */
+	printf ("\n");
+#endif
+
+	/* Clear CS for device */
+	cp->cp_pbdat |= 0x0001;
+
+	return count;
+}
+#endif	/* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
+
+/*
+ * SPI test
+ *
+ * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
+ * The interface is configured accordingly and several packets
+ * are transfered. The configurable test parameters are:
+ *   TEST_MIN_LENGTH - minimum size of packet to transfer
+ *   TEST_MAX_LENGTH - maximum size of packet to transfer
+ *   TEST_NUM - number of tests
+ */
+
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
+
+#define TEST_MIN_LENGTH		1
+#define TEST_MAX_LENGTH		MAX_BUFFER
+#define TEST_NUM		1
+
+static void packet_fill (char * packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 0; i < length; i++)
+	{
+	    packet[i] = c++;
+	}
+}
+
+static int packet_check (char * packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 0; i < length; i++) {
+	    if (packet[i] != c++) return -1;
+	}
+
+	return 0;
+}
+
+int spi_post_test (int flags)
+{
+	int res = -1;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
+	int i;
+	int l;
+
+	spi_init_f ();
+	spi_init_r ();
+
+	cp->cp_spmode |= SPMODE_LOOP;
+
+	for (i = 0; i < TEST_NUM; i++) {
+		for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
+			packet_fill ((char *)txbuf, l);
+
+			spi_xfer (l);
+
+			if (packet_check ((char *)rxbuf, l) < 0) {
+				goto Done;
+			}
+		}
+	}
+
+	res = 0;
+
+      Done:
+
+	cp->cp_spmode &= ~SPMODE_LOOP;
+
+	/*
+	 * SCC2 parameter RAM space overlaps
+	 * the SPI parameter RAM space. So we need to restore
+	 * the SCC2 configuration if it is used by UART.
+	 */
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	serial_reinit_all ();
+#endif
+
+	if (res != 0) {
+		post_log ("SPI test failed\n");
+	}
+
+	return res;
+}
+#endif	/* CONFIG_POST & CONFIG_SYS_POST_SPI */