x86: apl: Add FSP support

The memory and silicon init parts of the FSP need support code to work.
Add this for Apollo Lake.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

1 files changed, 210 insertions, 0 deletions

diff --git a/arch/x86/cpu/apollolake/fsp_m.c b/arch/x86/cpu/apollolake/fsp_m.c
new file mode 100644
index 0000000000..5308af8ed4
--- /dev/null
+++ b/arch/x86/cpu/apollolake/fsp_m.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/arch/iomap.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_m_upd.h>
+#include <asm/fsp2/fsp_internal.h>
+#include <dm/uclass-internal.h>
+
+/*
+ * ODT settings:
+ * If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A and HIGH for ODT_B,
+ * choose ODT_A_B_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A
+ * and LOW for ODT_B, choose ODT_A_B_HIGH_LOW.
+ *
+ * Note that the enum values correspond to the interpreted UPD fields
+ * within Ch[3:0]_OdtConfig parameters.
+ */
+enum {
+	ODT_A_B_HIGH_LOW	= 0 << 1,
+	ODT_A_B_HIGH_HIGH	= 1 << 1,
+	N_WR_24			= 1 << 5,
+};
+
+/*
+ * LPDDR4 helper routines for configuring the memory UPD for LPDDR4 operation.
+ * There are four physical LPDDR4 channels, each 32-bits wide. There are two
+ * logical channels using two physical channels together to form a 64-bit
+ * interface to memory for each logical channel.
+ */
+
+enum {
+	LP4_PHYS_CH0A,
+	LP4_PHYS_CH0B,
+	LP4_PHYS_CH1A,
+	LP4_PHYS_CH1B,
+
+	LP4_NUM_PHYS_CHANNELS,
+};
+
+/*
+ * The DQs within a physical channel can be bit-swizzled within each byte.
+ * Within a channel the bytes can be swapped, but the DQs need to be routed
+ * with the corresponding DQS (strobe).
+ */
+enum {
+	LP4_DQS0,
+	LP4_DQS1,
+	LP4_DQS2,
+	LP4_DQS3,
+
+	LP4_NUM_BYTE_LANES,
+	DQ_BITS_PER_DQS		= 8,
+};
+
+/* Provide bit swizzling per DQS and byte swapping within a channel */
+struct lpddr4_chan_swizzle_cfg {
+	u8 dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS];
+};
+
+struct lpddr4_swizzle_cfg {
+	struct lpddr4_chan_swizzle_cfg phys[LP4_NUM_PHYS_CHANNELS];
+};
+
+static void setup_sdram(struct fsp_m_config *cfg,
+			const struct lpddr4_swizzle_cfg *swizzle_cfg)
+{
+	const struct lpddr4_chan_swizzle_cfg *sch;
+	/* Number of bytes to copy per DQS */
+	const size_t sz = DQ_BITS_PER_DQS;
+	int chan;
+
+	cfg->memory_down = 1;
+	cfg->scrambler_support = 1;
+	cfg->channel_hash_mask = 0x36;
+	cfg->slice_hash_mask = 9;
+	cfg->interleaved_mode = 2;
+	cfg->channels_slices_enable = 0;
+	cfg->min_ref_rate2x_enable = 0;
+	cfg->dual_rank_support_enable = 1;
+
+	/* LPDDR4 is memory down so no SPD addresses */
+	cfg->dimm0_spd_address = 0;
+	cfg->dimm1_spd_address = 0;
+
+	for (chan = 0; chan < 4; chan++) {
+		struct fsp_ram_channel *ch = &cfg->chan[chan];
+
+		ch->rank_enable = 1;
+		ch->device_width = 1;
+		ch->dram_density = 2;
+		ch->option = 3;
+		ch->odt_config = ODT_A_B_HIGH_HIGH;
+	}
+
+	/*
+	 * CH0_DQB byte lanes in the bit swizzle configuration field are
+	 * not 1:1. The mapping within the swizzling field is:
+	 *   indices [0:7]   - byte lane 1 (DQS1) DQ[8:15]
+	 *   indices [8:15]  - byte lane 0 (DQS0) DQ[0:7]
+	 *   indices [16:23] - byte lane 3 (DQS3) DQ[24:31]
+	 *   indices [24:31] - byte lane 2 (DQS2) DQ[16:23]
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH0B];
+	memcpy(&cfg->ch_bit_swizzling[0][0], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][8], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][16], &sch->dqs[LP4_DQS3], sz);
+	memcpy(&cfg->ch_bit_swizzling[0][24], &sch->dqs[LP4_DQS2], sz);
+
+	/*
+	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH0A];
+	memcpy(&cfg->ch_bit_swizzling[1][0], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][8], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][16], &sch->dqs[LP4_DQS2], sz);
+	memcpy(&cfg->ch_bit_swizzling[1][24], &sch->dqs[LP4_DQS3], sz);
+
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH1B];
+	memcpy(&cfg->ch_bit_swizzling[2][0], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][8], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][16], &sch->dqs[LP4_DQS3], sz);
+	memcpy(&cfg->ch_bit_swizzling[2][24], &sch->dqs[LP4_DQS2], sz);
+
+	/*
+	 * CH0_DQA byte lanes in the bit swizzle configuration field are 1:1.
+	 */
+	sch = &swizzle_cfg->phys[LP4_PHYS_CH1A];
+	memcpy(&cfg->ch_bit_swizzling[3][0], &sch->dqs[LP4_DQS0], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][8], &sch->dqs[LP4_DQS1], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][16], &sch->dqs[LP4_DQS2], sz);
+	memcpy(&cfg->ch_bit_swizzling[3][24], &sch->dqs[LP4_DQS3], sz);
+}
+
+int fspm_update_config(struct udevice *dev, struct fspm_upd *upd)
+{
+	struct fsp_m_config *cfg = &upd->config;
+	struct fspm_arch_upd *arch = &upd->arch;
+
+	arch->nvs_buffer_ptr = NULL;
+	prepare_mrc_cache(upd);
+	arch->stack_base = (void *)0xfef96000;
+	arch->boot_loader_tolum_size = 0;
+
+	arch->boot_mode = FSP_BOOT_WITH_FULL_CONFIGURATION;
+	cfg->serial_debug_port_type = 2;
+	cfg->serial_debug_port_device = 2;
+	cfg->serial_debug_port_stride_size = 2;
+	cfg->serial_debug_port_address = 0;
+
+	cfg->package = 1;
+	/* Don't enforce a memory size limit */
+	cfg->memory_size_limit = 0;
+	cfg->low_memory_max_value = 2048;  /* 2 GB */
+	/* No restrictions on memory above 4GiB */
+	cfg->high_memory_max_value = 0;
+
+	/* Always default to attempt to use saved training data */
+	cfg->disable_fast_boot = 0;
+
+	const u8 *swizzle_data;
+
+	swizzle_data = dev_read_u8_array_ptr(dev, "lpddr4-swizzle",
+					     LP4_NUM_BYTE_LANES *
+					     DQ_BITS_PER_DQS *
+					     LP4_NUM_PHYS_CHANNELS);
+	if (!swizzle_data)
+		return log_msg_ret("Cannot read swizzel data", -EINVAL);
+
+	setup_sdram(cfg, (struct lpddr4_swizzle_cfg *)swizzle_data);
+
+	cfg->pre_mem_gpio_table_ptr = 0;
+
+	cfg->profile = 0xb;
+	cfg->msg_level_mask = 0;
+
+	/* other */
+	cfg->skip_cse_rbp = 1;
+	cfg->periodic_retraining_disable = 0;
+	cfg->enable_s3_heci2 = 0;
+
+	return 0;
+}
+
+/*
+ * The FSP-M binary appears to break the SPI controller. It can be fixed by
+ * writing the BAR again, so do that here
+ */
+int fspm_done(struct udevice *dev)
+{
+	struct udevice *spi;
+	int ret;
+
+	/* Don't probe the device, since that reads the BAR */
+	ret = uclass_find_first_device(UCLASS_SPI, &spi);
+	if (ret)
+		return log_msg_ret("SPI", ret);
+	if (!spi)
+		return log_msg_ret("no SPI", -ENODEV);
+
+	dm_pci_write_config32(spi, PCI_BASE_ADDRESS_0,
+			      IOMAP_SPI_BASE | PCI_BASE_ADDRESS_SPACE_MEMORY);
+
+	return 0;
+}