x86: Add Intel speedstep and turbo mode code

Intel chips have a turbo mode where they can run faster for a short period
until they reach thermal limits. Add code to adjust and query this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>

2 files changed, 120 insertions, 0 deletions

diff --git a/arch/x86/include/asm/speedstep.h b/arch/x86/include/asm/speedstep.h
new file mode 100644
index 0000000000..b938b86ba8
--- /dev/null
+++ b/arch/x86/include/asm/speedstep.h
@@ -0,0 +1,89 @@
+/*
+ * From Coreboot file of same name
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *               2012 secunet Security Networks AG
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _ASM_SPEEDSTEP_H
+#define _ASM_SPEEDSTEP_H
+
+/* Magic value used to locate speedstep configuration in the device tree */
+#define SPEEDSTEP_APIC_MAGIC 0xACAC
+
+/* MWAIT coordination I/O base address. This must match
+ * the \_PR_.CPU0 PM base address.
+ */
+#define PMB0_BASE 0x510
+
+/* PMB1: I/O port that triggers SMI once cores are in the same state.
+ * See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
+ */
+#define PMB1_BASE 0x800
+
+struct sst_state {
+	uint8_t dynfsb:1; /* whether this is SLFM */
+	uint8_t nonint:1; /* add .5 to ratio */
+	uint8_t ratio:6;
+	uint8_t vid;
+	uint8_t is_turbo;
+	uint8_t is_slfm;
+	uint32_t power;
+};
+#define SPEEDSTEP_RATIO_SHIFT		8
+#define SPEEDSTEP_RATIO_DYNFSB_SHIFT	(7 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_DYNFSB		(1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT_SHIFT	(6 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT		(1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
+#define SPEEDSTEP_RATIO_VALUE_MASK	(0x1f << SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_VID_MASK		0x3f
+#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){	\
+		0, /* dynfsb won't be read. */				\
+		((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0,	\
+		(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK)		\
+					>> SPEEDSTEP_RATIO_SHIFT),	\
+		(val & mask) & SPEEDSTEP_VID_MASK,			\
+		0, /* not turbo by default */				\
+		0, /* not slfm by default */				\
+		0  /* power is hardcoded in software. */		\
+	})
+#define SPEEDSTEP_ENCODE_STATE(state)	(				\
+	((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |	\
+	((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) |	\
+	((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) |		\
+	((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
+#define SPEEDSTEP_DOUBLE_RATIO(state)	(				\
+	((uint8_t)(state).ratio * 2) + (state).nonint)
+
+struct sst_params {
+	struct sst_state slfm;
+	struct sst_state min;
+	struct sst_state max;
+	struct sst_state turbo;
+};
+
+/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
+   processor is 14, the lowest is always 6. This makes 5 states with the
+   minimal step width of 2. With turbo mode and super LFM we have at most 7. */
+#define SPEEDSTEP_MAX_NORMAL_STATES	5
+#define SPEEDSTEP_MAX_STATES		(SPEEDSTEP_MAX_NORMAL_STATES + 2)
+struct sst_table {
+	/* Table of p-states for EMTTM and ACPI by decreasing performance. */
+	struct sst_state states[SPEEDSTEP_MAX_STATES];
+	int num_states;
+};
+
+void speedstep_gen_pstates(struct sst_table *);
+
+#define SPEEDSTEP_MAX_POWER_YONAH	31000
+#define SPEEDSTEP_MIN_POWER_YONAH	13100
+#define SPEEDSTEP_MAX_POWER_MEROM	35000
+#define SPEEDSTEP_MIN_POWER_MEROM	25000
+#define SPEEDSTEP_SLFM_POWER_MEROM	12000
+#define SPEEDSTEP_MAX_POWER_PENRYN	35000
+#define SPEEDSTEP_MIN_POWER_PENRYN	15000
+#define SPEEDSTEP_SLFM_POWER_PENRYN	12000
+
+#endif
diff --git a/arch/x86/include/asm/turbo.h b/arch/x86/include/asm/turbo.h
new file mode 100644
index 0000000000..bb0d4b4354
--- /dev/null
+++ b/arch/x86/include/asm/turbo.h
@@ -0,0 +1,31 @@
+/*
+ * From coreboot file of the same name
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _ASM_TURBO_H
+#define _ASM_TURBO_H
+
+#define CPUID_LEAF_PM		6
+#define PM_CAP_TURBO_MODE	(1 << 1)
+
+#define MSR_IA32_MISC_ENABLES	0x1a0
+#define H_MISC_DISABLE_TURBO	(1 << 6)
+
+enum {
+	TURBO_UNKNOWN,
+	TURBO_UNAVAILABLE,
+	TURBO_DISABLED,
+	TURBO_ENABLED,
+};
+
+/* Return current turbo state */
+int turbo_get_state(void);
+
+/* Enable turbo */
+void turbo_enable(void);
+
+#endif