x86: Rename existing FSP code to fsp1

Since there is now a new version of the FSP and it is incompatible with
the existing version, move the code into an fsp1 directory. This will
allow us to put FSP v2 code into an fsp2 directory.

Add a Kconfig which defines which version is in use.

Some of the code in this new fsp1/ directory is generic across both FSPv1
and FSPv2. Future patches will address this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

1 files changed, 165 insertions, 0 deletions

diff --git a/arch/x86/lib/fsp1/fsp_common.c b/arch/x86/lib/fsp1/fsp_common.c
new file mode 100644
index 0000000000..591eef7b81
--- /dev/null
+++ b/arch/x86/lib/fsp1/fsp_common.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <rtc.h>
+#include <asm/acpi_s3.h>
+#include <asm/cmos_layout.h>
+#include <asm/early_cmos.h>
+#include <asm/io.h>
+#include <asm/mrccache.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/fsp1/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkcpu(void)
+{
+	return 0;
+}
+
+int print_cpuinfo(void)
+{
+	post_code(POST_CPU_INFO);
+	return default_print_cpuinfo();
+}
+
+int fsp_init_phase_pci(void)
+{
+	u32 status;
+
+	/* call into FspNotify */
+	debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
+	status = fsp_notify(NULL, INIT_PHASE_PCI);
+	if (status)
+		debug("fail, error code %x\n", status);
+	else
+		debug("OK\n");
+
+	return status ? -EPERM : 0;
+}
+
+void board_final_cleanup(void)
+{
+	u32 status;
+
+	/* call into FspNotify */
+	debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
+	status = fsp_notify(NULL, INIT_PHASE_BOOT);
+	if (status)
+		debug("fail, error code %x\n", status);
+	else
+		debug("OK\n");
+
+	return;
+}
+
+static __maybe_unused void *fsp_prepare_mrc_cache(void)
+{
+	struct mrc_data_container *cache;
+	struct mrc_region entry;
+	int ret;
+
+	ret = mrccache_get_region(NULL, &entry);
+	if (ret)
+		return NULL;
+
+	cache = mrccache_find_current(&entry);
+	if (!cache)
+		return NULL;
+
+	debug("%s: mrc cache at %p, size %x checksum %04x\n", __func__,
+	      cache->data, cache->data_size, cache->checksum);
+
+	return cache->data;
+}
+
+#ifdef CONFIG_HAVE_ACPI_RESUME
+int fsp_save_s3_stack(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (gd->arch.prev_sleep_state == ACPI_S3)
+		return 0;
+
+	ret = uclass_get_device(UCLASS_RTC, 0, &dev);
+	if (ret) {
+		debug("Cannot find RTC: err=%d\n", ret);
+		return -ENODEV;
+	}
+
+	/* Save the stack address to CMOS */
+	ret = rtc_write32(dev, CMOS_FSP_STACK_ADDR, gd->start_addr_sp);
+	if (ret) {
+		debug("Save stack address to CMOS: err=%d\n", ret);
+		return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
+int arch_fsp_init(void)
+{
+	void *nvs;
+	int stack = CONFIG_FSP_TEMP_RAM_ADDR;
+	int boot_mode = BOOT_FULL_CONFIG;
+#ifdef CONFIG_HAVE_ACPI_RESUME
+	int prev_sleep_state = chipset_prev_sleep_state();
+	gd->arch.prev_sleep_state = prev_sleep_state;
+#endif
+
+	if (!gd->arch.hob_list) {
+#ifdef CONFIG_ENABLE_MRC_CACHE
+		nvs = fsp_prepare_mrc_cache();
+#else
+		nvs = NULL;
+#endif
+
+#ifdef CONFIG_HAVE_ACPI_RESUME
+		if (prev_sleep_state == ACPI_S3) {
+			if (nvs == NULL) {
+				/* If waking from S3 and no cache then */
+				debug("No MRC cache found in S3 resume path\n");
+				post_code(POST_RESUME_FAILURE);
+				/* Clear Sleep Type */
+				chipset_clear_sleep_state();
+				/* Reboot */
+				debug("Rebooting..\n");
+				outb(SYS_RST | RST_CPU, IO_PORT_RESET);
+				/* Should not reach here.. */
+				panic("Reboot System");
+			}
+
+			/*
+			 * DM is not available yet at this point, hence call
+			 * CMOS access library which does not depend on DM.
+			 */
+			stack = cmos_read32(CMOS_FSP_STACK_ADDR);
+			boot_mode = BOOT_ON_S3_RESUME;
+		}
+#endif
+		/*
+		 * The first time we enter here, call fsp_init().
+		 * Note the execution does not return to this function,
+		 * instead it jumps to fsp_continue().
+		 */
+		fsp_init(stack, boot_mode, nvs);
+	} else {
+		/*
+		 * The second time we enter here, adjust the size of malloc()
+		 * pool before relocation. Given gd->malloc_base was adjusted
+		 * after the call to board_init_f_init_reserve() in arch/x86/
+		 * cpu/start.S, we should fix up gd->malloc_limit here.
+		 */
+		gd->malloc_limit += CONFIG_FSP_SYS_MALLOC_F_LEN;
+	}
+
+	return 0;
+}