x86: fsp: Add FSP2 base support

Add support for some important configuration options and FSP memory init.
The memory init uses swizzle tables from the device tree.

Support for the FSP_S binary is also included.

Bootstage timing is used for both FSP_M and FSP_S and memory-mapped SPI
reads.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

10 files changed, 784 insertions, 2 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 17a6fe6d3d..e2e0f20f21 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -326,7 +326,7 @@ config X86_RAMTEST
 
 config FLASH_DESCRIPTOR_FILE
 	string "Flash descriptor binary filename"
-	depends on HAVE_INTEL_ME
+	depends on HAVE_INTEL_ME || FSP_VERSION2
 	default "descriptor.bin"
 	help
 	  The filename of the file to use as flash descriptor in the
@@ -411,6 +411,54 @@ config FSP_ADDR
 	  The default base address of 0xfffc0000 indicates that the binary must
 	  be located at offset 0xc0000 from the beginning of a 1MB flash device.
 
+if FSP_VERSION2
+
+config FSP_FILE_T
+	string "Firmware Support Package binary filename (Temp RAM)"
+	default "fsp_t.bin"
+	help
+	  The filename of the file to use for the temporary-RAM init phase from
+	  the Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up an initial area of RAM which can be used for the
+	  stack and other purposes, while bringing up the main system DRAM.
+
+config FSP_ADDR_T
+	hex "Firmware Support Package binary location (Temp RAM)"
+	default 0xffff8000
+	help
+	  FSP is not Position-Independent Code (PIC) and FSP components have to
+	  be rebased if placed at a location which is different from the
+	  perferred base address specified during the FSP build. Use Intel's
+	  Binary Configuration Tool (BCT) to do the rebase.
+
+config FSP_FILE_M
+	string "Firmware Support Package binary filename (Memory Init)"
+	default "fsp_m.bin"
+	help
+	  The filename of the file to use for the RAM init phase from the
+	  Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up the main system DRAM and runs in SPL, once
+	  temporary RAM (CAR) is working.
+
+config FSP_FILE_S
+	string "Firmware Support Package binary filename (Silicon Init)"
+	default "fsp_s.bin"
+	help
+	  The filename of the file to use for the Silicon init phase from the
+	  Firmware Support Package binary. Put this in the board directory.
+	  It is used to set up the silicon to work correctly and must be
+	  executed after DRAM is running.
+
+config IFWI_INPUT_FILE
+	string "Filename containing FIT (Firmware Interface Table) with IFWI"
+	default "fitimage.bin"
+	help
+	  The IFWI is obtained by running a tool on this file to extract the
+	  IFWI. Put this in the board directory. The IFWI contains U-Boot TPL,
+	  microcode and other internal items.
+
+endif
+
 config FSP_TEMP_RAM_ADDR
 	hex
 	depends on FSP_VERSION1
@@ -595,7 +643,7 @@ config VGA_BIOS_ADDR
 
 config HAVE_VBT
 	bool "Add a Video BIOS Table (VBT) image"
-	depends on FSP_VERSION1
+	depends on HAVE_FSP
 	help
 	  Select this option if you have a Video BIOS Table (VBT) image that
 	  you would like to add to your ROM. This is normally required if you
diff --git a/arch/x86/include/asm/fsp2/fsp_api.h b/arch/x86/include/asm/fsp2/fsp_api.h
new file mode 100644
index 0000000000..af1e8857b9
--- /dev/null
+++ b/arch/x86/include/asm/fsp2/fsp_api.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot fsp2_0/memory_init.c
+ */
+
+#ifndef __ASM_FSP2_API_H
+#define __ASM_FSP2_API_H
+
+#include <asm/fsp/fsp_api.h>
+
+struct fspm_upd;
+struct fsps_upd;
+struct hob_header;
+
+enum fsp_boot_mode {
+	FSP_BOOT_WITH_FULL_CONFIGURATION = 0x00,
+	FSP_BOOT_WITH_MINIMAL_CONFIGURATION = 0x01,
+	FSP_BOOT_ASSUMING_NO_CONFIGURATION_CHANGES = 0x02,
+	FSP_BOOT_ON_S4_RESUME = 0x05,
+	FSP_BOOT_ON_S3_RESUME = 0x11,
+	FSP_BOOT_ON_FLASH_UPDATE = 0x12,
+	FSP_BOOT_IN_RECOVERY_MODE = 0x20
+};
+
+struct __packed fsp_upd_header {
+	u64	signature;
+	u8	revision;
+	u8	reserved[23];
+};
+
+/**
+ * fsp_memory_init() - Init the SDRAM
+ *
+ * @s3wake: true if we are booting from resume, so cannot reinit the mememory
+ *	from scatch since we will lose its contents
+ * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use
+ *	mapped SPI
+ * @return 0 if OK, -ve on error
+ */
+int fsp_memory_init(bool s3wake, bool use_spi_flash);
+
+typedef asmlinkage int (*fsp_memory_init_func)(struct fspm_upd *params,
+					       struct hob_header **hobp);
+
+/**
+ * fsp_silicon_init() - Init the silicon
+ *
+ * This calls the FSP's 'silicon init' entry point
+ *
+ * @s3wake: true if we are booting from resume, so cannot reinit the mememory
+ *	from scatch since we will lose its contents
+ * @use_spi_flash: true to use the fast SPI driver to read FSP, otherwise use
+ *	mapped SPI
+ * @return 0 if OK, -ve on error
+ */
+int fsp_silicon_init(bool s3wake, bool use_spi_flash);
+
+typedef asmlinkage int (*fsp_silicon_init_func)(struct fsps_upd *params);
+
+#endif
diff --git a/arch/x86/include/asm/fsp2/fsp_internal.h b/arch/x86/include/asm/fsp2/fsp_internal.h
new file mode 100644
index 0000000000..f751fbf961
--- /dev/null
+++ b/arch/x86/include/asm/fsp2/fsp_internal.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot
+ */
+
+#ifndef __ASM_FSP_INTERNAL_H
+#define __ASM_FSP_INTERNAL_H
+
+struct binman_entry;
+struct fsp_header;
+struct fspm_upd;
+struct fsps_upd;
+
+enum fsp_type_t {
+	FSP_M,
+	FSP_S,
+};
+
+int fsp_get_header(ulong offset, ulong size, bool use_spi_flash,
+		   struct fsp_header **fspp);
+
+/**
+ * fsp_locate_fsp() - Locate an FSP component
+ *
+ * This finds an FSP component by various methods. It is not as general-purpose
+ * as it looks, since it expects FSP-M to be requested in SPL (only), and FSP-S
+ * to be requested in U-Boot proper.
+ *
+ * @type: Component to locate
+ * @entry: Returns location of component
+ * @use_spi_flash: true to read using the Fast SPI driver, false to use
+ *	memory-mapped SPI flash
+ * @devp: Returns northbridge device
+ * @hdrp: Returns FSP header
+ * @rom_offsetp: If non-NULL, returns the offset to add to any image position to
+ *	find the memory-mapped location of that position. For example, for ROM
+ *	position 0x1000, it will be mapped into 0x1000 + *rom_offsetp.
+ */
+int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry,
+		   bool use_spi_flash, struct udevice **devp,
+		   struct fsp_header **hdrp, ulong *rom_offsetp);
+
+/**
+ * arch_fsps_preinit() - Perform init needed before calling FSP-S
+ *
+ * This allows use of probed drivers and PCI so is a convenient place to do any
+ * init that is needed before FSP-S is called. After this, U-Boot relocates and
+ * calls arch_fsp_init_r() before PCI is probed, and that function is not
+ * allowed to probe PCI before calling FSP-S.
+ */
+int arch_fsps_preinit(void);
+
+/**
+ * fspm_update_config() - Set up the config structure for FSP-M
+ *
+ * @dev: Hostbridge device containing config
+ * @upd: Config data to fill in
+ * @return 0 if OK, -ve on error
+ */
+int fspm_update_config(struct udevice *dev, struct fspm_upd *upd);
+
+/**
+ * fspm_done() - Indicate that memory init is complete
+ *
+ * This allows the board to do whatever post-init it needs before things
+ * continue.
+ *
+ * @dev: Hostbridge device
+ * @return 0 if OK, -ve on error
+ */
+int fspm_done(struct udevice *dev);
+
+/**
+ * fsps_update_config() - Set up the config structure for FSP-S
+ *
+ * @dev: Hostbridge device containing config
+ * @rom_offset: Value to add to convert from ROM offset to memory-mapped address
+ * @upd: Config data to fill in
+ * @return 0 if OK, -ve on error
+ */
+int fsps_update_config(struct udevice *dev, ulong rom_offset,
+		       struct fsps_upd *upd);
+
+/**
+ * prepare_mrc_cache() - Read the MRC cache into the product-data struct
+ *
+ * This looks for cached Memory-reference code (MRC) data and stores it into
+ * @upd for use by the FSP-M binary.
+ *
+ * @return 0 if OK, -ENOENT if no data (whereupon the caller can continue and
+ *	expect a slower boot), other -ve value on other error
+ */
+int prepare_mrc_cache(struct fspm_upd *upd);
+
+#endif
diff --git a/arch/x86/lib/fsp2/Makefile b/arch/x86/lib/fsp2/Makefile
new file mode 100644
index 0000000000..ddbe2d0db2
--- /dev/null
+++ b/arch/x86/lib/fsp2/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright 2019 Google LLC
+
+obj-y += fsp_common.o
+obj-y += fsp_dram.o
+obj-y += fsp_init.o
+obj-y += fsp_meminit.o
+obj-y += fsp_silicon_init.o
+obj-y += fsp_support.o
diff --git a/arch/x86/lib/fsp2/fsp_common.c b/arch/x86/lib/fsp2/fsp_common.c
new file mode 100644
index 0000000000..f69456e43a
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_common.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <init.h>
+
+int arch_fsp_init(void)
+{
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c
new file mode 100644
index 0000000000..90a238a224
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_dram.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <acpi_s3.h>
+#include <handoff.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/fsp2/fsp_api.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int dram_init(void)
+{
+	int ret;
+
+	if (spl_phase() == PHASE_SPL) {
+#ifdef CONFIG_HAVE_ACPI_RESUME
+		bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
+#else
+		bool s3wake = false;
+#endif
+
+		ret = fsp_memory_init(s3wake,
+			      IS_ENABLED(CONFIG_APL_BOOT_FROM_FAST_SPI_FLASH));
+		if (ret) {
+			debug("Memory init failed (err=%x)\n", ret);
+			return ret;
+		}
+
+		/* The FSP has already set up DRAM, so grab the info we need */
+		ret = fsp_scan_for_ram_size();
+		if (ret)
+			return ret;
+
+#ifdef CONFIG_ENABLE_MRC_CACHE
+		gd->arch.mrc[MRC_TYPE_NORMAL].buf =
+			fsp_get_nvs_data(gd->arch.hob_list,
+					 &gd->arch.mrc[MRC_TYPE_NORMAL].len);
+		gd->arch.mrc[MRC_TYPE_VAR].buf =
+			fsp_get_var_nvs_data(gd->arch.hob_list,
+					     &gd->arch.mrc[MRC_TYPE_VAR].len);
+		log_debug("normal %x, var %x\n",
+			  gd->arch.mrc[MRC_TYPE_NORMAL].len,
+			  gd->arch.mrc[MRC_TYPE_VAR].len);
+#endif
+	} else {
+#if CONFIG_IS_ENABLED(HANDOFF)
+		struct spl_handoff *ho = gd->spl_handoff;
+
+		if (!ho) {
+			debug("No SPL handoff found\n");
+			return -ESTRPIPE;
+		}
+		gd->ram_size = ho->ram_size;
+		handoff_load_dram_banks(ho);
+#endif
+		ret = arch_fsps_preinit();
+		if (ret)
+			return log_msg_ret("fsp_s_preinit", ret);
+	}
+
+	return 0;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#if CONFIG_IS_ENABLED(HANDOFF)
+	struct spl_handoff *ho = gd->spl_handoff;
+
+	return ho->arch.usable_ram_top;
+#endif
+
+	return gd->ram_top;
+}
diff --git a/arch/x86/lib/fsp2/fsp_init.c b/arch/x86/lib/fsp2/fsp_init.c
new file mode 100644
index 0000000000..da9bd6b45c
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_init.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <binman.h>
+#include <binman_sym.h>
+#include <cbfs.h>
+#include <dm.h>
+#include <init.h>
+#include <spi.h>
+#include <spl.h>
+#include <spi_flash.h>
+#include <asm/intel_pinctrl.h>
+#include <dm/uclass-internal.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int arch_cpu_init_dm(void)
+{
+	struct udevice *dev;
+	ofnode node;
+	int ret;
+
+	/* Make sure pads are set up early in U-Boot */
+	if (spl_phase() != PHASE_BOARD_F)
+		return 0;
+
+	/* Probe all pinctrl devices to set up the pads */
+	ret = uclass_first_device_err(UCLASS_PINCTRL, &dev);
+	if (ret)
+		return log_msg_ret("no fsp pinctrl", ret);
+	node = ofnode_path("fsp");
+	if (!ofnode_valid(node))
+		return log_msg_ret("no fsp params", -EINVAL);
+	ret = pinctrl_config_pads_for_node(dev, node);
+	if (ret)
+		return log_msg_ret("pad config", ret);
+
+	return ret;
+}
+
+#if !defined(CONFIG_TPL_BUILD)
+binman_sym_declare(ulong, intel_fsp_m, image_pos);
+binman_sym_declare(ulong, intel_fsp_m, size);
+
+/**
+ * get_cbfs_fsp() - Obtain the FSP by looking up in CBFS
+ *
+ * This looks up an FSP in a CBFS. It is used mostly for testing, when booting
+ * U-Boot from a hybrid image containing coreboot as the first-stage bootloader.
+ *
+ * The typical use for this feature is when building a Chrome OS image which
+ * includes coreboot in it. By adding U-Boot into the 'COREBOOT' CBFS as well,
+ * it is possible to make coreboot chain-load U-Boot. Thus the initial stages of
+ * the SoC init can be done by coreboot and the later stages by U-Boot. This is
+ * a convenient way to start the porting work. The jump to U-Boot can then be
+ * moved progressively earlier and earlier, until U-Boot takes over all the init
+ * and you have a native port.
+ *
+ * This function looks up a CBFS at a known location and reads the FSP-M from it
+ * so that U-Boot can init the memory.
+ *
+ * This function is not used in the normal boot but is kept here for future
+ * development.
+ *
+ * @type; Type to look up (only FSP_M supported at present)
+ * @map_base: Base memory address for mapped SPI
+ * @entry: Returns an entry containing the position of the FSP image
+ */
+static int get_cbfs_fsp(enum fsp_type_t type, ulong map_base,
+			struct binman_entry *entry)
+{
+	/*
+	 * Use a hard-coded position of CBFS in the ROM for now. It would be
+	 * possible to read the position using the FMAP in the ROM, but since
+	 * this code is only used for development, it doesn't seem worth it.
+	 * Use the 'cbfstool <image> layout' command to get these values, e.g.:
+	 * 'COREBOOT' (CBFS, size 1814528, offset 2117632).
+	 */
+	ulong cbfs_base = 0x205000;
+	ulong cbfs_size = 0x1bb000;
+	struct cbfs_priv *cbfs;
+	int ret;
+
+	ret = cbfs_init_mem(map_base + cbfs_base, cbfs_size, &cbfs);
+	if (ret)
+		return ret;
+	if (!ret) {
+		const struct cbfs_cachenode *node;
+
+		node = cbfs_find_file(cbfs, "fspm.bin");
+		if (!node)
+			return log_msg_ret("fspm node", -ENOENT);
+
+		entry->image_pos = (ulong)node->data;
+		entry->size = node->data_length;
+	}
+
+	return 0;
+}
+
+int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry,
+		   bool use_spi_flash, struct udevice **devp,
+		   struct fsp_header **hdrp, ulong *rom_offsetp)
+{
+	ulong mask = CONFIG_ROM_SIZE - 1;
+	struct udevice *dev;
+	ulong rom_offset = 0;
+	uint map_size;
+	ulong map_base;
+	uint offset;
+	int ret;
+
+	/*
+	 * Find the devices but don't probe them, since we don't want to
+	 * auto-config PCI before silicon init runs
+	 */
+	ret = uclass_find_first_device(UCLASS_NORTHBRIDGE, &dev);
+	if (ret)
+		return log_msg_ret("Cannot get northbridge", ret);
+	if (!use_spi_flash) {
+		struct udevice *sf;
+
+		/* Just use the SPI driver to get the memory map */
+		ret = uclass_find_first_device(UCLASS_SPI_FLASH, &sf);
+		if (ret)
+			return log_msg_ret("Cannot get SPI flash", ret);
+		ret = dm_spi_get_mmap(sf, &map_base, &map_size, &offset);
+		if (ret)
+			return log_msg_ret("Could not get flash mmap", ret);
+	}
+
+	if (spl_phase() >= PHASE_BOARD_F) {
+		if (type != FSP_S)
+			return -EPROTONOSUPPORT;
+		ret = binman_entry_find("intel-fsp-s", entry);
+		if (ret)
+			return log_msg_ret("binman entry", ret);
+		if (!use_spi_flash)
+			rom_offset = (map_base & mask) - CONFIG_ROM_SIZE;
+	} else {
+		ret = -ENOENT;
+		if (false)
+			/*
+			 * Support using a hybrid image build by coreboot. See
+			 * the function comments for details
+			 */
+			ret = get_cbfs_fsp(type, map_base, entry);
+		if (ret) {
+			ulong mask = CONFIG_ROM_SIZE - 1;
+
+			if (type != FSP_M)
+				return -EPROTONOSUPPORT;
+			entry->image_pos = binman_sym(ulong, intel_fsp_m,
+						      image_pos);
+			entry->size = binman_sym(ulong, intel_fsp_m, size);
+			if (entry->image_pos != BINMAN_SYM_MISSING) {
+				ret = 0;
+				if (use_spi_flash)
+					entry->image_pos &= mask;
+				else
+					entry->image_pos += (map_base & mask);
+			} else {
+				ret = -ENOENT;
+			}
+		}
+	}
+	if (ret)
+		return log_msg_ret("Cannot find FSP", ret);
+	entry->image_pos += rom_offset;
+
+	/*
+	 * Account for the time taken to read memory-mapped SPI flash since in
+	 * this case we don't use the SPI driver and BOOTSTAGE_ID_ACCUM_SPI.
+	 */
+	if (!use_spi_flash)
+		bootstage_start(BOOTSTAGE_ID_ACCUM_MMAP_SPI, "mmap_spi");
+	ret = fsp_get_header(entry->image_pos, entry->size, use_spi_flash,
+			     hdrp);
+	if (!use_spi_flash)
+		bootstage_accum(BOOTSTAGE_ID_ACCUM_MMAP_SPI);
+	if (ret)
+		return log_msg_ret("fsp_get_header", ret);
+	*devp = dev;
+	if (rom_offsetp)
+		*rom_offsetp = rom_offset;
+
+	return 0;
+}
+#endif
diff --git a/arch/x86/lib/fsp2/fsp_meminit.c b/arch/x86/lib/fsp2/fsp_meminit.c
new file mode 100644
index 0000000000..bf30c47989
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_meminit.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
+ * Mostly taken from coreboot fsp2_0/memory_init.c
+ */
+
+#include <common.h>
+#include <binman.h>
+#include <asm/mrccache.h>
+#include <asm/fsp/fsp_infoheader.h>
+#include <asm/fsp2/fsp_api.h>
+#include <asm/fsp2/fsp_internal.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_m_upd.h>
+
+static int prepare_mrc_cache_type(enum mrc_type_t type,
+				  struct mrc_data_container **cachep)
+{
+	struct mrc_data_container *cache;
+	struct mrc_region entry;
+	int ret;
+
+	ret = mrccache_get_region(type, NULL, &entry);
+	if (ret)
+		return ret;
+	cache = mrccache_find_current(&entry);
+	if (!cache)
+		return -ENOENT;
+
+	log_debug("MRC at %x, size %x\n", (uint)cache->data, cache->data_size);
+	*cachep = cache;
+
+	return 0;
+}
+
+int prepare_mrc_cache(struct fspm_upd *upd)
+{
+	struct mrc_data_container *cache;
+	int ret;
+
+	ret = prepare_mrc_cache_type(MRC_TYPE_NORMAL, &cache);
+	if (ret)
+		return log_msg_ret("Cannot get normal cache", ret);
+	upd->arch.nvs_buffer_ptr = cache->data;
+
+	ret = prepare_mrc_cache_type(MRC_TYPE_VAR, &cache);
+	if (ret)
+		return log_msg_ret("Cannot get var cache", ret);
+	upd->config.variable_nvs_buffer_ptr = cache->data;
+
+	return 0;
+}
+
+int fsp_memory_init(bool s3wake, bool use_spi_flash)
+{
+	struct fspm_upd upd, *fsp_upd;
+	fsp_memory_init_func func;
+	struct binman_entry entry;
+	struct fsp_header *hdr;
+	struct hob_header *hob;
+	struct udevice *dev;
+	int ret;
+
+	ret = fsp_locate_fsp(FSP_M, &entry, use_spi_flash, &dev, &hdr, NULL);
+	if (ret)
+		return log_msg_ret("locate FSP", ret);
+	debug("Found FSP_M at %x, size %x\n", hdr->img_base, hdr->img_size);
+
+	/* Copy over the default config */
+	fsp_upd = (struct fspm_upd *)(hdr->img_base + hdr->cfg_region_off);
+	if (fsp_upd->header.signature != FSPM_UPD_SIGNATURE)
+		return log_msg_ret("Bad UPD signature", -EPERM);
+	memcpy(&upd, fsp_upd, sizeof(upd));
+
+	ret = fspm_update_config(dev, &upd);
+	if (ret)
+		return log_msg_ret("Could not setup config", ret);
+
+	debug("SDRAM init...");
+	bootstage_start(BOOTSTATE_ID_ACCUM_FSP_M, "fsp-m");
+	func = (fsp_memory_init_func)(hdr->img_base + hdr->fsp_mem_init);
+	ret = func(&upd, &hob);
+	bootstage_accum(BOOTSTATE_ID_ACCUM_FSP_M);
+	if (ret)
+		return log_msg_ret("SDRAM init fail\n", ret);
+
+	gd->arch.hob_list = hob;
+	debug("done\n");
+
+	ret = fspm_done(dev);
+	if (ret)
+		return log_msg_ret("fsm_done\n", ret);
+
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_silicon_init.c b/arch/x86/lib/fsp2/fsp_silicon_init.c
new file mode 100644
index 0000000000..d7ce43e1eb
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_silicon_init.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright (C) 2015-2016 Intel Corp.
+ * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
+ *
+ * Mostly taken from coreboot fsp2_0/silicon_init.c
+ */
+
+#define LOG_CATEGORY UCLASS_NORTHBRIDGE
+
+#include <common.h>
+#include <binman.h>
+#include <dm.h>
+#include <asm/arch/fsp/fsp_configs.h>
+#include <asm/arch/fsp/fsp_s_upd.h>
+#include <asm/fsp/fsp_infoheader.h>
+#include <asm/fsp2/fsp_internal.h>
+
+int fsp_silicon_init(bool s3wake, bool use_spi_flash)
+{
+	struct fsps_upd upd, *fsp_upd;
+	fsp_silicon_init_func func;
+	struct fsp_header *hdr;
+	struct binman_entry entry;
+	struct udevice *dev;
+	ulong rom_offset = 0;
+	int ret;
+
+	ret = fsp_locate_fsp(FSP_S, &entry, use_spi_flash, &dev, &hdr,
+			     &rom_offset);
+	if (ret)
+		return log_msg_ret("locate FSP", ret);
+	gd->arch.fsp_s_hdr = hdr;
+
+	/* Copy over the default config */
+	fsp_upd = (struct fsps_upd *)(hdr->img_base + hdr->cfg_region_off);
+	if (fsp_upd->header.signature != FSPS_UPD_SIGNATURE)
+		return log_msg_ret("Bad UPD signature", -EPERM);
+	memcpy(&upd, fsp_upd, sizeof(upd));
+
+	ret = fsps_update_config(dev, rom_offset, &upd);
+	if (ret)
+		return log_msg_ret("Could not setup config", ret);
+	log_debug("Silicon init...");
+	bootstage_start(BOOTSTATE_ID_ACCUM_FSP_S, "fsp-s");
+	func = (fsp_silicon_init_func)(hdr->img_base + hdr->fsp_silicon_init);
+	ret = func(&upd);
+	bootstage_accum(BOOTSTATE_ID_ACCUM_FSP_S);
+	if (ret)
+		return log_msg_ret("Silicon init fail\n", ret);
+	log_debug("done\n");
+
+	return 0;
+}
diff --git a/arch/x86/lib/fsp2/fsp_support.c b/arch/x86/lib/fsp2/fsp_support.c
new file mode 100644
index 0000000000..0a04b443f7
--- /dev/null
+++ b/arch/x86/lib/fsp2/fsp_support.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: Intel
+/*
+ * Copyright 2019 Google LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spi_flash.h>
+#include <asm/fsp/fsp_support.h>
+#include <asm/fsp2/fsp_internal.h>
+
+/* The amount of the FSP header to probe to obtain what we need */
+#define PROBE_BUF_SIZE 0x180
+
+int fsp_get_header(ulong offset, ulong size, bool use_spi_flash,
+		   struct fsp_header **fspp)
+{
+	static efi_guid_t guid = FSP_HEADER_GUID;
+	struct fv_ext_header *exhdr;
+	struct fsp_header *fsp;
+	struct ffs_file_header *file_hdr;
+	struct fv_header *fv;
+	struct raw_section *raw;
+	void *ptr, *base;
+	u8 buf[PROBE_BUF_SIZE];
+	struct udevice *dev;
+	int ret;
+
+	/*
+	 * There are quite a very steps to work through all the headers in this
+	 * file and the structs have similar names. Turn on debugging if needed
+	 * to understand what is going wrong.
+	 *
+	 * You are in a maze of twisty little headers all alike.
+	 */
+	debug("offset=%x buf=%x\n", (uint)offset, (uint)buf);
+	if (use_spi_flash) {
+		ret = uclass_first_device_err(UCLASS_SPI_FLASH, &dev);
+		if (ret)
+			return log_msg_ret("Cannot find flash device", ret);
+		ret = spi_flash_read_dm(dev, offset, PROBE_BUF_SIZE, buf);
+		if (ret)
+			return log_msg_ret("Cannot read flash", ret);
+	} else {
+		memcpy(buf, (void *)offset, PROBE_BUF_SIZE);
+	}
+
+	/* Initalise the FSP base */
+	ptr = buf;
+	fv = ptr;
+
+	/* Check the FV signature, _FVH */
+	debug("offset=%x sign=%x\n", (uint)offset, (uint)fv->sign);
+	if (fv->sign != EFI_FVH_SIGNATURE)
+		return log_msg_ret("Base FV signature", -EINVAL);
+
+	/* Go to the end of the FV header and align the address */
+	debug("fv->ext_hdr_off = %x\n", fv->ext_hdr_off);
+	ptr += fv->ext_hdr_off;
+	exhdr = ptr;
+	ptr += ALIGN(exhdr->ext_hdr_size, 8);
+	debug("ptr=%x\n", ptr - (void *)buf);
+
+	/* Check the FFS GUID */
+	file_hdr = ptr;
+	if (memcmp(&file_hdr->name, &guid, sizeof(guid)))
+		return log_msg_ret("Base FFS GUID", -ENXIO);
+	/* Add the FFS header size to find the raw section header */
+	ptr = file_hdr + 1;
+
+	raw = ptr;
+	debug("raw->type = %x\n", raw->type);
+	if (raw->type != EFI_SECTION_RAW)
+		return log_msg_ret("Section type not RAW", -ENOEXEC);
+
+	/* Add the raw section header size to find the FSP header */
+	ptr = raw + 1;
+	fsp = ptr;
+
+	/* Check the FSPH header */
+	debug("fsp %x\n", (uint)fsp);
+	if (fsp->sign != EFI_FSPH_SIGNATURE)
+		return log_msg_ret("Base FSPH signature", -EACCES);
+
+	base = (void *)fsp->img_base;
+	debug("Image base %x\n", (uint)base);
+	debug("Image addr %x\n", (uint)fsp->fsp_mem_init);
+	if (use_spi_flash) {
+		ret = spi_flash_read_dm(dev, offset, size, base);
+		if (ret)
+			return log_msg_ret("Could not read FPS-M", ret);
+	} else {
+		memcpy(base, (void *)offset, size);
+	}
+	ptr = base + (ptr - (void *)buf);
+	*fspp = ptr;
+
+	return 0;
+}
+
+u32 fsp_notify(struct fsp_header *fsp_hdr, u32 phase)
+{
+	fsp_notify_f notify;
+	struct fsp_notify_params params;
+	struct fsp_notify_params *params_ptr;
+	u32 status;
+
+	if (!fsp_hdr)
+		fsp_hdr = gd->arch.fsp_s_hdr;
+
+	if (!fsp_hdr)
+		return log_msg_ret("no FSP", -ENOENT);
+
+	notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify);
+	params.phase = phase;
+	params_ptr = &params;
+
+	/*
+	 * Use ASM code to ensure correct parameter is on the stack for
+	 * FspNotify as U-Boot is using different ABI from FSP
+	 */
+	asm volatile (
+		"pushl	%1;"		/* push notify phase */
+		"call	*%%eax;"	/* call FspNotify */
+		"addl	$4, %%esp;"	/* clean up the stack */
+		: "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr)
+	);
+
+	return status;
+}