Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

24 files changed, 484 insertions, 155 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index ef7637a49c..409478539e 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -102,7 +102,9 @@ obj-y	+= cpu.o
 obj-y	+= cpu_init.o
 obj-y	+= cpu_init_early.o
 obj-y	+= interrupts.o
+ifneq ($(CONFIG_QEMU_E500),y)
 obj-y	+= speed.o
+endif
 obj-y	+= tlb.o
 obj-y	+= traps.o
 
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 8b79c05b1f..9d8acd0aa1 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -113,6 +113,21 @@ static void check_erratum_a4580(uint32_t svr)
 }
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
+/*
+ * This workaround can be implemented in PBI, or by u-boot.
+ */
+static void check_erratum_a007212(void)
+{
+	u32 __iomem *plldgdcr = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
+
+	if (in_be32(plldgdcr) & 0x1fe) {
+		/* check if PLL ratio is set by workaround */
+		puts("Work-around for Erratum A007212 enabled\n");
+	}
+}
+#endif
+
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
@@ -268,6 +283,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A005125
 	puts("Work-around for Erratum A005125 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007075
+	if (has_erratum_a007075())
+		puts("Work-around for Erratum A007075 enabled\n");
+#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 	if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
 	    (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
@@ -277,6 +296,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (has_erratum_a006261())
 		puts("Work-around for Erratum A006261 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
+	check_erratum_a007212();
+#endif
+
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 3e99b079c7..12e8e10d48 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -130,6 +130,11 @@ int checkcpu (void)
 
 	get_sys_info(&sysinfo);
 
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	if (sysinfo.diff_sysclk == 1)
+		puts("Single Source Clock Configuration\n");
+#endif
+
 	puts("Clock Configuration:");
 	for_each_cpu(i, core, nr_cores, mask) {
 		if (!(i & 3))
@@ -272,7 +277,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifndef CONFIG_SYS_FSL_TBCLK_DIV
 #define CONFIG_SYS_FSL_TBCLK_DIV 8
 #endif
-unsigned long get_tbclk (void)
+__weak unsigned long get_tbclk (void)
 {
 	unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
 
@@ -338,7 +343,8 @@ void mpc85xx_reginfo(void)
 	!defined(CONFIG_SYS_INIT_L2_ADDR)
 phys_size_t initdram(int board_type)
 {
-#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \
+	defined(CONFIG_QEMU_E500)
 	return fsl_ddr_sdram_size();
 #else
 	return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 81aeadd363..36ef23232e 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -33,9 +33,35 @@
 #endif
 
 #include "../../../../drivers/block/fsl_sata.h"
+#ifdef CONFIG_U_QE
+#include "../../../../drivers/qe/qe.h"
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+/*
+ * For deriving usb clock from 100MHz sysclk, reference divisor is set
+ * to a value of 5, which gives an intermediate value 20(100/5). The
+ * multiplication factor integer is set to 24, which when multiplied to
+ * above intermediate value provides clock for usb ip.
+ */
+void usb_single_source_clk_configure(struct ccsr_usb_phy *usb_phy)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+	if (sysinfo.diff_sysclk == 1) {
+		clrbits_be32(&usb_phy->pllprg[1],
+			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI);
+		setbits_be32(&usb_phy->pllprg[1],
+			     CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV_INTERNAL_CLK |
+			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI_INTERNAL_CLK |
+			     CONFIG_SYS_FSL_USB_INTERNAL_SOC_CLK_EN);
+		}
+}
+#endif
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A006261
 void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
 {
@@ -84,7 +110,7 @@ void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
 #endif
 
 
-#ifdef CONFIG_QE
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
 extern qe_iop_conf_t qe_iop_conf_tab[];
 extern void qe_config_iopin(u8 port, u8 pin, int dir,
 				int open_drain, int assign);
@@ -173,17 +199,14 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm)
 #endif
 
 #ifdef CONFIG_SYS_FSL_CPC
-static void enable_cpc(void)
+#if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F)
+static void disable_cpc_sram(void)
 {
 	int i;
-	u32 size = 0;
 
 	cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
 
 	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
-		u32 cpccfg0 = in_be32(&cpc->cpccfg0);
-		size += CPC_CFG0_SZ_K(cpccfg0);
-#ifdef CONFIG_RAMBOOT_PBL
 		if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) {
 			/* find and disable LAW of SRAM */
 			struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR);
@@ -198,8 +221,21 @@ static void enable_cpc(void)
 			out_be32(&cpc->cpccsr0, 0);
 			out_be32(&cpc->cpcsrcr0, 0);
 		}
+	}
+}
 #endif
 
+static void enable_cpc(void)
+{
+	int i;
+	u32 size = 0;
+
+	cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
+
+	for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
+		u32 cpccfg0 = in_be32(&cpc->cpccfg0);
+		size += CPC_CFG0_SZ_K(cpccfg0);
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
 		setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS);
 #endif
@@ -267,11 +303,77 @@ static void corenet_tb_init(void)
 }
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
+void fsl_erratum_a007212_workaround(void)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 ddr_pll_ratio;
+	u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
+	u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28);
+	u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+	u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40);
+	u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+	u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60);
+	u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68);
+#endif
+#endif
+	/*
+	 * Even this workaround applies to selected version of SoCs, it is
+	 * safe to apply to all versions, with the limitation of odd ratios.
+	 * If RCW has disabled DDR PLL, we have to apply this workaround,
+	 * otherwise DDR will not work.
+	 */
+	ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
+		FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) &
+		FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
+	/* check if RCW sets ratio to 0, required by this workaround */
+	if (ddr_pll_ratio != 0)
+		return;
+	ddr_pll_ratio = (in_be32(&gur->rcwsr[0]) >>
+		FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
+		FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
+	/* check if reserved bits have the desired ratio */
+	if (ddr_pll_ratio == 0) {
+		printf("Error: Unknown DDR PLL ratio!\n");
+		return;
+	}
+	ddr_pll_ratio >>= 1;
+
+	setbits_be32(plldadcr1, 0x02000001);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+	setbits_be32(plldadcr2, 0x02000001);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+	setbits_be32(plldadcr3, 0x02000001);
+#endif
+#endif
+	setbits_be32(dpdovrcr4, 0xe0000000);
+	out_be32(plldgdcr1, 0x08000001 | (ddr_pll_ratio << 1));
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+	out_be32(plldgdcr2, 0x08000001 | (ddr_pll_ratio << 1));
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+	out_be32(plldgdcr3, 0x08000001 | (ddr_pll_ratio << 1));
+#endif
+#endif
+	udelay(100);
+	clrbits_be32(plldadcr1, 0x02000001);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 2)
+	clrbits_be32(plldadcr2, 0x02000001);
+#if (CONFIG_NUM_DDR_CONTROLLERS >= 3)
+	clrbits_be32(plldadcr3, 0x02000001);
+#endif
+#endif
+	clrbits_be32(dpdovrcr4, 0xe0000000);
+}
+#endif
+
 void cpu_init_f (void)
 {
 	extern void m8560_cpm_reset (void);
 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 #endif
 #if defined(CONFIG_SECURE_BOOT)
 	struct law_entry law;
@@ -298,6 +400,10 @@ void cpu_init_f (void)
 	law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
 	if (law.index != -1)
 		disable_law(law.index);
+
+#if defined(CONFIG_SYS_CPC_REINIT_F)
+	disable_cpc_sram();
+#endif
 #endif
 
 #ifdef CONFIG_CPM2
@@ -309,10 +415,12 @@ void cpu_init_f (void)
 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
 #endif
-#ifdef CONFIG_QE
+
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
+
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif
@@ -330,6 +438,17 @@ void cpu_init_f (void)
 	in_be32(&gur->dcsrcr);
 #endif
 
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+#ifdef CONFIG_DEEP_SLEEP
+	/* disable the console if boot from deep sleep */
+	if (in_be32(&gur->scrtsr[0]) & (1 << 3))
+		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+#endif
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
+	fsl_erratum_a007212_workaround();
+#endif
+
 }
 
 /* Implement a dummy function for those platforms w/o SERDES */
@@ -598,6 +717,9 @@ skip_l2:
 	puts("disabled\n");
 #endif
 
+#if defined(CONFIG_RAMBOOT_PBL)
+	disable_cpc_sram();
+#endif
 	enable_cpc();
 
 #ifndef CONFIG_SYS_FSL_NO_SERDES
@@ -716,6 +838,9 @@ skip_l2:
 			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
 			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
 			     CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+		usb_single_source_clk_configure(usb_phy);
+#endif
 		setbits_be32(&usb_phy->port1.ctrl,
 			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
 		setbits_be32(&usb_phy->port1.drvvbuscfg,
@@ -767,8 +892,6 @@ skip_l2:
 	return 0;
 }
 
-extern void setup_ivors(void);
-
 void arch_preboot_os(void)
 {
 	u32 msr;
@@ -781,8 +904,6 @@ void arch_preboot_os(void)
 	msr = mfmsr();
 	msr &= ~(MSR_ME|MSR_CE);
 	mtmsr(msr);
-
-	setup_ivors();
 }
 
 #if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
@@ -797,21 +918,13 @@ int sata_initialize(void)
 
 void cpu_secondary_init_r(void)
 {
-#ifdef CONFIG_QE
+#ifdef CONFIG_U_QE
+	uint qe_base = CONFIG_SYS_IMMR + 0x00140000; /* QE immr base */
+#elif defined CONFIG_QE
 	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
-#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
-	int ret;
-	size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
-
-	/* load QE firmware from NAND flash to DDR first */
-	ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
-			&fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
-
-	if (ret && ret == -EUCLEAN) {
-		printf ("NAND read for QE firmware at offset %x failed %d\n",
-				CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
-	}
 #endif
+
+#ifdef CONFIG_QE
 	qe_init(qe_base);
 	qe_reset();
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 993b8b828b..998781b706 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -79,7 +79,7 @@ void setup_ifc(void)
 #endif
 
 /* We run cpu_init_early_f in AS = 1 */
-void cpu_init_early_f(void)
+void cpu_init_early_f(void *fdt)
 {
 	u32 mas0, mas1, mas2, mas3, mas7;
 	int i;
@@ -102,6 +102,12 @@ void cpu_init_early_f(void)
 	for (i = 0; i < sizeof(gd_t); i++)
 		((char *)gd)[i] = 0;
 
+	/*
+	 * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems,
+	 * so we need to populate it before it accesses it.
+	 */
+	gd->fdt_blob = fdt;
+
 	mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13);
 	mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M);
 	mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 33bc900167..0cc21c7f68 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -275,12 +275,16 @@ static inline void ft_fixup_l2cache(void *blob)
 			u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 			/* Only initialize every eighth thread */
-			if (reg && !((*reg) % 8))
+			if (reg && !((*reg) % 8)) {
+				fdt_setprop_cell(blob, l2_off, "cache-stash-id",
+						 (*reg / 4) + 32 + 1);
+			}
 #else
-			if (reg)
-#endif
+			if (reg) {
 				fdt_setprop_cell(blob, l2_off, "cache-stash-id",
-					 (*reg * 2) + 32 + 1);
+						 (*reg * 2) + 32 + 1);
+			}
+#endif
 #endif
 
 			fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
@@ -582,6 +586,33 @@ static void fdt_fixup_usb(void *fdt)
 #define fdt_fixup_usb(x)
 #endif
 
+#if defined(CONFIG_PPC_T1040)
+static void fdt_fixup_l2_switch(void *blob)
+{
+	uchar l2swaddr[6];
+	int node;
+
+	/* The l2switch node from device-tree has
+	 * compatible string "vitesse-9953" */
+	node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
+	if (node == -FDT_ERR_NOTFOUND)
+		/* no l2switch node has been found */
+		return;
+
+	/* Get MAC address for the l2switch from "l2switchaddr"*/
+	if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) {
+		printf("Warning: MAC address for l2switch not found\n");
+		memset(l2swaddr, 0, sizeof(l2swaddr));
+	}
+
+	/* Add MAC address to l2switch node */
+	fdt_setprop(blob, node, "local-mac-address", l2swaddr,
+		    sizeof(l2swaddr));
+}
+#else
+#define fdt_fixup_l2_switch(x)
+#endif
+
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	int off;
@@ -719,6 +750,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 			"clock-frequency", gd->bus_clk/2, 1);
 
 	fdt_fixup_usb(blob);
+
+	fdt_fixup_l2_switch(blob);
 }
 
 /*
diff --git a/arch/powerpc/cpu/mpc85xx/fixed_ivor.S b/arch/powerpc/cpu/mpc85xx/fixed_ivor.S
deleted file mode 100644
index ebbb8c0744..0000000000
--- a/arch/powerpc/cpu/mpc85xx/fixed_ivor.S
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * Kumar Gala <kumar.gala@freescale.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* This file is intended to be included by other asm code since
- * we will want to execute this on both the primary core when
- * it does a bootm and the secondary core's that get released
- * out of the spin table */
-
-#define SET_IVOR(vector_number, vector_offset)	\
-	li	r3,vector_offset@l; 		\
-	mtspr	SPRN_IVOR##vector_number,r3;
-
-#define SET_GIVOR(vector_number, vector_offset)	\
-	li	r3,vector_offset@l; 		\
-	mtspr	SPRN_GIVOR##vector_number,r3;
-
-	SET_IVOR(0, 0x020) /* Critical Input */
-	SET_IVOR(1, 0x000) /* Machine Check */
-	SET_IVOR(2, 0x060) /* Data Storage */
-	SET_IVOR(3, 0x080) /* Instruction Storage */
-	SET_IVOR(4, 0x0a0) /* External Input */
-	SET_IVOR(5, 0x0c0) /* Alignment */
-	SET_IVOR(6, 0x0e0) /* Program */
-	SET_IVOR(7, 0x100) /* FP Unavailable */
-	SET_IVOR(8, 0x120) /* System Call */
-	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
-	SET_IVOR(10, 0x160) /* Decrementer */
-	SET_IVOR(11, 0x180) /* Fixed Interval Timer */
-	SET_IVOR(12, 0x1a0) /* Watchdog Timer */
-	SET_IVOR(13, 0x1c0) /* Data TLB Error */
-	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
-	SET_IVOR(15, 0x040) /* Debug */
-
-/* e500v1 & e500v2 only */
-#ifndef CONFIG_E500MC
-	SET_IVOR(32, 0x200) /* SPE Unavailable */
-	SET_IVOR(33, 0x220) /* Embedded FP Data */
-	SET_IVOR(34, 0x240) /* Embedded FP Round */
-#endif
-
-	SET_IVOR(35, 0x260) /* Performance monitor */
-
-/* e500mc only */
-#ifdef CONFIG_E500MC
-	SET_IVOR(36, 0x280) /* Processor doorbell */
-	SET_IVOR(37, 0x2a0) /* Processor doorbell critical */
-	SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */
-	SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */
-	SET_IVOR(40, 0x300) /* Hypervisor system call */
-	SET_IVOR(41, 0x320) /* Hypervisor Priviledge */
-
-	SET_GIVOR(2, 0x060) /* Guest Data Storage */
-	SET_GIVOR(3, 0x080) /* Guest Instruction Storage */
-	SET_GIVOR(4, 0x0a0) /* Guest External Input */
-	SET_GIVOR(8, 0x120) /* Guest System Call */
-	SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */
-	SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */
-#endif
diff --git a/arch/powerpc/cpu/mpc85xx/qe_io.c b/arch/powerpc/cpu/mpc85xx/qe_io.c
index 76c60da420..d2825ec36e 100644
--- a/arch/powerpc/cpu/mpc85xx/qe_io.c
+++ b/arch/powerpc/cpu/mpc85xx/qe_io.c
@@ -12,7 +12,7 @@
 #include "asm/io.h"
 #include "asm/immap_85xx.h"
 
-#if defined(CONFIG_QE)
+#if defined(CONFIG_QE) && !defined(CONFIG_U_QE)
 #define	NUM_OF_PINS	32
 void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 {
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index fcfba7ec19..a2c0ad4244 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -405,9 +405,6 @@ __second_half_boot_page:
 	bne	3b
 	isync
 
-	/* setup IVORs to match fixed offsets */
-#include "fixed_ivor.S"
-
 	/* get the upper bits of the addr */
 	lwz	r11,ENTRY_ADDR_UPPER(r10)
 
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index adf09efa27..d516d4e4a6 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -74,28 +74,33 @@ void get_sys_info(sys_info_t *sys_info)
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
-#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
-	uint single_src;
-#endif
 
 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+	uint ddr_refclk_sel;
+	unsigned int porsr1_sys_clk;
+	porsr1_sys_clk = in_be32(&gur->porsr1) >> FSL_DCFG_PORSR1_SYSCLK_SHIFT
+						& FSL_DCFG_PORSR1_SYSCLK_MASK;
+	if (porsr1_sys_clk == FSL_DCFG_PORSR1_SYSCLK_DIFF)
+		sys_info->diff_sysclk = 1;
+	else
+		sys_info->diff_sysclk = 0;
+
 	/*
 	 * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
 	 * are driven by separate DDR Refclock or single source
 	 * differential clock.
 	 */
-	single_src = (in_be32(&gur->rcwsr[5]) >>
+	ddr_refclk_sel = (in_be32(&gur->rcwsr[5]) >>
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
 		      FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
 	/*
-	 * For single source clocking, both ddrclock and syclock
+	 * For single source clocking, both ddrclock and sysclock
 	 * are driven by differential sysclock.
 	 */
-	if (single_src == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) {
-		printf("Single Source Clock Configuration\n");
+	if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
 		sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
-	} else
+	else
 #endif
 #ifdef CONFIG_DDR_CLK_FREQ
 		sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
@@ -107,6 +112,13 @@ void get_sys_info(sys_info_t *sys_info)
 	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
 			FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
 			& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
+	if (mem_pll_rat == 0) {
+		mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+			FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT) &
+			FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
+	}
+#endif
 	/* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
 	 * T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
 	 * it uses 6.
@@ -151,8 +163,8 @@ void get_sys_info(sys_info_t *sys_info)
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
-#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080) || \
-	defined(CONFIG_PPC_T2081)
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420) || \
+	defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #else
@@ -336,6 +348,10 @@ void get_sys_info(sys_info_t *sys_info)
 
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
+#ifdef CONFIG_U_QE
+	sys_info->freq_qe =  sys_info->freq_systembus / 2;
+#endif
+
 #else /* CONFIG_FSL_CORENET */
 	uint plat_ratio, e500_ratio, half_freq_systembus;
 	int i;
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index dbbd8e588c..0e3c86a0f8 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -26,6 +26,8 @@
 #undef	MSR_KERNEL
 #define MSR_KERNEL ( MSR_ME )	/* Machine Check */
 
+#define LAW_EN		0x80000000
+
 #if defined(CONFIG_NAND_SPL) || \
 	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL))
 #define MINIMAL_SPL
@@ -78,6 +80,13 @@ _start_e500:
 	li	r1,MSR_DE
 	mtmsr 	r1
 
+	/*
+	 * If we got an ePAPR device tree pointer passed in as r3, we need that
+	 * later in cpu_init_early_f(). Save it to a safe register before we
+	 * clobber it so that we can fetch it from there later.
+	 */
+	mr	r24, r3
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 	mfspr	r3,SPRN_SVR
 	rlwinm	r3,r3,0,0xff
@@ -115,7 +124,8 @@ _start_e500:
 #endif
 
 
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC)
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) && \
+	!defined(CONFIG_E6500)
 	/* ISBC uses L2 as stack.
 	 * Disable L2 cache here so that u-boot can enable it later
 	 * as part of it's normal flow
@@ -460,7 +470,8 @@ nexti:	mflr	r1		/* R1 = our PC */
 2:	cmpw	r3, r4
 	blt	1b
 
-#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL)
+#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) && \
+	!defined(CONFIG_SECURE_BOOT)
 /*
  * TLB entry for debuggging in AS1
  * Create temporary TLB entry in AS0 to handle debug exception
@@ -481,12 +492,6 @@ nexti:	mflr	r1		/* R1 = our PC */
 		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
 		0, r6
 
-#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
-	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
-		0, BOOKE_PAGESZ_1M, \
-		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
-		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
-		0, r6
 #else
 /*
  * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
@@ -574,7 +579,6 @@ infinite_debug_loop:
 #ifdef CONFIG_FSL_CORENET
 
 #define CCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
-#define LAW_EN		0x80000000
 #define LAW_SIZE_4K	0xb
 #define CCSRBAR_LAWAR	(LAW_EN | (0x1e << 20) | LAW_SIZE_4K)
 #define CCSRAR_C	0x80000000	/* Commit */
@@ -1142,6 +1146,10 @@ _start_cont:
 	mr	r1,r3		/* Transfer to SP(r1) */
 
 	GET_GOT
+
+	/* Pass our potential ePAPR device tree pointer to cpu_init_early_f */
+	mr	r3, r24
+
 	bl	cpu_init_early_f
 
 	/* switch back to AS = 0 */
@@ -1644,6 +1652,7 @@ relocate_code:
 	mr	r10,r5		/* Save copy of Destination Address	*/
 
 	GET_GOT
+#ifndef CONFIG_SPL_SKIP_RELOCATE
 	mr	r3,r5				/* Destination Address	*/
 	lis	r4,CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
 	ori	r4,r4,CONFIG_SYS_MONITOR_BASE@l
@@ -1734,6 +1743,7 @@ relocate_code:
 
 	mtlr	r0
 	blr				/* NEVER RETURNS! */
+#endif
 	.globl	in_ram
 in_ram:
 
@@ -1965,10 +1975,4 @@ flush_dcache:
 	isync
 
 	blr
-
-.globl setup_ivors
-setup_ivors:
-
-#include "fixed_ivor.S"
-	blr
 #endif /* !MINIMAL_SPL */
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
index 68160a9512..1034cd4852 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -46,6 +46,7 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_DMA_LIODN(2, 227),
 
 	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+	SET_QE_LIODN(559),
 };
 int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
 
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 8748ecd144..129ec662fe 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -24,7 +24,7 @@ void invalidate_tlb(u8 tlb)
 		mtspr(MMUCSR0, 0x2);
 }
 
-void init_tlbs(void)
+__weak void init_tlbs(void)
 {
 	int i;
 
@@ -236,20 +236,26 @@ void init_addr_map(void)
 }
 #endif
 
-unsigned int
-setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
+uint64_t tlb_map_range(ulong v_addr, phys_addr_t p_addr, uint64_t size,
+		       enum tlb_map_type map_type)
 {
 	int i;
 	unsigned int tlb_size;
-	unsigned int wimge = MAS2_M;
-	unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
+	unsigned int wimge;
+	unsigned int perm;
 	unsigned int max_cam, tsize_mask;
-	u64 size, memsize = (u64)memsize_in_meg << 20;
 
+	if (map_type == TLB_MAP_RAM) {
+		perm = MAS3_SX|MAS3_SW|MAS3_SR;
+		wimge = MAS2_M;
 #ifdef CONFIG_SYS_PPC_DDR_WIMGE
-	wimge = CONFIG_SYS_PPC_DDR_WIMGE;
+		wimge = CONFIG_SYS_PPC_DDR_WIMGE;
 #endif
-	size = min(memsize, CONFIG_MAX_MEM_MAPPED);
+	} else {
+		perm = MAS3_SW|MAS3_SR;
+		wimge = MAS2_I|MAS2_G;
+	}
+
 	if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
 		/* Convert (4^max) kB to (2^max) bytes */
 		max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
@@ -261,11 +267,11 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
 	}
 
 	for (i = 0; size && i < 8; i++) {
-		int ram_tlb_index = find_free_tlbcam();
+		int tlb_index = find_free_tlbcam();
 		u32 camsize = __ilog2_u64(size) & tsize_mask;
-		u32 align = __ilog2(ram_tlb_address) & tsize_mask;
+		u32 align = __ilog2(v_addr) & tsize_mask;
 
-		if (ram_tlb_index == -1)
+		if (tlb_index == -1)
 			break;
 
 		if (align == -2) align = max_cam;
@@ -277,18 +283,29 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
 
 		tlb_size = camsize - 10;
 
-		set_tlb(1, ram_tlb_address, p_addr,
-			MAS3_SX|MAS3_SW|MAS3_SR, wimge,
-			0, ram_tlb_index, tlb_size, 1);
+		set_tlb(1, v_addr, p_addr, perm, wimge,
+			0, tlb_index, tlb_size, 1);
 
 		size -= 1ULL << camsize;
-		memsize -= 1ULL << camsize;
-		ram_tlb_address += 1UL << camsize;
+		v_addr += 1UL << camsize;
 		p_addr += 1UL << camsize;
 	}
 
+	return size;
+}
+
+unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr,
+				 unsigned int memsize_in_meg)
+{
+	unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
+	u64 memsize = (u64)memsize_in_meg << 20;
+
+	memsize = min(memsize, CONFIG_MAX_MEM_MAPPED);
+	memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM);
+
 	if (memsize)
 		print_size(memsize, " left unmapped\n");
+
 	return memsize_in_meg;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
index df3b0f9168..d77a6dc62d 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
@@ -4,6 +4,12 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include "config.h"	/* CONFIG_BOARDDIR */
+
+#ifndef CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_MONITOR_LEN	0x80000
+#endif
+
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
@@ -76,7 +82,7 @@ SECTIONS
     KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
   } :text = 0xffff
 
-  . = ADDR(.text) + 0x80000;
+  . = ADDR(.text) + CONFIG_SYS_MONITOR_LEN;
 
   __bss_start = .;
   .bss (NOLOAD)       :
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index acaa0939ab..8453f3a3fe 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -57,6 +57,16 @@ SECTIONS
 	. = ALIGN(8);
 	__init_begin = .;
 	__init_end = .;
+#ifdef CONFIG_SPL_SKIP_RELOCATE
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : {
+		*(.sbss*)
+		*(.bss*)
+	}
+	. = ALIGN(4);
+	__bss_end = .;
+#endif
 
 /* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */
 #ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC
@@ -66,11 +76,16 @@ SECTIONS
 	} :text = 0xffff
 #else
 #if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
-	.bootpg ADDR(.text) + 0x1000 :
+#ifndef BOOT_PAGE_OFFSET
+#define BOOT_PAGE_OFFSET 0x1000
+#endif
+	.bootpg ADDR(.text) + BOOT_PAGE_OFFSET :
 	{
 		arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
 	}
+#ifndef RESET_VECTOR_OFFSET
 #define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#endif
 #elif defined(CONFIG_FSL_ELBC)
 #define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
 #else
@@ -81,6 +96,7 @@ SECTIONS
 	} = 0xffff
 #endif
 
+#ifndef CONFIG_SPL_SKIP_RELOCATE
 	/*
 	 * Make sure that the bss segment isn't linked at 0x0, otherwise its
 	 * address won't be updated during relocation fixups.
@@ -95,4 +111,5 @@ SECTIONS
 	}
 	. = ALIGN(4);
 	__bss_end = .;
+#endif
 }
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index 2af4c80f60..0b9086dfd0 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -12,7 +12,12 @@
 #define RESET_VECTOR_ADDRESS	0xfffffffc
 #endif
 
+#ifndef CONFIG_SYS_MONITOR_LEN
+#define CONFIG_SYS_MONITOR_LEN	0x80000
+#endif
+
 OUTPUT_ARCH(powerpc)
+ENTRY(_start_e500)
 
 PHDRS
 {
@@ -84,7 +89,7 @@ SECTIONS
   {
     KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg))
   } :text = 0xffff
-  . = ADDR(.text) + 0x80000;
+  . = ADDR(.text) + CONFIG_SYS_MONITOR_LEN;
 #else
   .bootpg RESET_VECTOR_ADDRESS - 0xffc :
   {
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index a401083107..33d53a8cfe 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -221,6 +221,32 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
 }
 #endif /* not SPL */
 
+void disable_non_ddr_laws(void)
+{
+	int i;
+	int id;
+	for (i = 0; i < FSL_HW_NUM_LAWS; i++) {
+		u32 lawar = in_be32(LAWAR_ADDR(i));
+
+		if (lawar & LAW_EN) {
+			id = (lawar & ~LAW_EN) >> 20;
+			switch (id) {
+			case LAW_TRGT_IF_DDR_1:
+			case LAW_TRGT_IF_DDR_2:
+			case LAW_TRGT_IF_DDR_3:
+			case LAW_TRGT_IF_DDR_4:
+			case LAW_TRGT_IF_DDR_INTRLV:
+			case LAW_TRGT_IF_DDR_INTLV_34:
+			case LAW_TRGT_IF_DDR_INTLV_123:
+			case LAW_TRGT_IF_DDR_INTLV_1234:
+						continue;
+			default:
+						disable_law(i);
+			}
+		}
+	}
+}
+
 void init_laws(void)
 {
 	int i;
@@ -233,6 +259,23 @@ void init_laws(void)
 #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
 #endif
 
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500) && \
+						!defined(CONFIG_E500MC)
+	/* ISBC (Boot ROM) creates a LAW 0 entry for non PBL platforms,
+	 * which is not disabled before transferring the control to uboot.
+	 * Disable the LAW 0 entry here.
+	 */
+	disable_law(0);
+#endif
+
+#if !defined(CONFIG_SECURE_BOOT)
+	/*
+	 * if any non DDR LAWs has been created earlier, remove them before
+	 * LAW table is parsed.
+	*/
+	disable_non_ddr_laws();
+#endif
+
 	/*
 	 * Any LAWs that were set up before we booted assume they are meant to
 	 * be around and mark them used.
@@ -244,15 +287,6 @@ void init_laws(void)
 			gd->arch.used_laws |= (1 << i);
 	}
 
-#if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
-	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
-	/*
-	 * in SPL boot we've already parsed the law_table and setup those LAWs
-	 * so don't do it again.
-	 */
-	return;
-#endif
-
 	for (i = 0; i < num_law_entries; i++) {
 		if (law_table[i].index == -1)
 			set_next_law(law_table[i].addr, law_table[i].size,
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index df44451091..864e74c0c7 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -19,8 +19,8 @@
  */
 #define CONFIG_PPC_SPINTABLE_COMPATIBLE
 
-#define FSL_DDR_VER_4_7	47
-#define FSL_DDR_VER_5_0	50
+#include <fsl_ddrc_version.h>
+#define CONFIG_SYS_FSL_DDR_BE
 
 /* IP endianness */
 #define CONFIG_SYS_FSL_IFC_BE
@@ -154,6 +154,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
+#define CONFIG_SYS_FSL_ERRATUM_A007075
 #define CONFIG_SYS_FSL_ERRATUM_A006261
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x10
 #define CONFIG_ESDHC_HC_BLK_ADDR
@@ -401,6 +402,7 @@
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_5
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV	32
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
@@ -442,6 +444,7 @@
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_NUM_FM2_10GEC	1
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_4
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
@@ -476,6 +479,7 @@
 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
 #define CONFIG_SYS_FSL_ERRATUM_A005812
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
+#define CONFIG_SYS_FSL_ERRATUM_A007075
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x20
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
@@ -490,6 +494,7 @@
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_4
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV	32
@@ -527,6 +532,7 @@
 #define CONFIG_SYS_NUM_FM2_DTSEC	5
 #define CONFIG_SYS_NUM_FM2_10GEC	1
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_4
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 #define CONFIG_SYS_FSL_TBCLK_DIV	16
@@ -553,6 +559,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_4
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
 #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR	0xb0000000
 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT	0xff600000
@@ -571,6 +578,7 @@
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
 #define CONFIG_SYS_FSL_DSP_DDR_ADDR	0x40000000
 #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR	0xb0000000
@@ -668,8 +676,10 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_FSL_ERRATUM_A006379
 #define CONFIG_SYS_FSL_ERRATUM_A006593
+#define CONFIG_SYS_FSL_ERRATUM_A007075
 #define CONFIG_SYS_FSL_ERRATUM_A006475
 #define CONFIG_SYS_FSL_ERRATUM_A006384
+#define CONFIG_SYS_FSL_ERRATUM_A007212
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
 #ifdef CONFIG_PPC_B4860
@@ -704,6 +714,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#ifdef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDRC_GEN4
+#endif
 #if defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042)
 #define CONFIG_MAX_CPUS			4
 #elif defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
@@ -736,6 +749,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
+#define QE_MURAM_SIZE			0x6000UL
+#define MAX_QE_RISC			1
+#define QE_NUM_OF_SNUM			28
 
 #elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
 #define CONFIG_E6500
@@ -777,6 +793,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v3.0"
 #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A007212
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 #define CONFIG_SYS_FSL_SFP_VER_3_0
 #define CONFIG_SYS_FSL_ISBC_VER		2
@@ -793,10 +810,15 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 #define CONFIG_SYS_FSL_SEC_COMPAT	6
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_6
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT	8
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 
+#elif defined(CONFIG_QEMU_E500)
+#define CONFIG_MAX_CPUS			1
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xe0000000
+
 #else
 #error Processor type not defined for this platform
 #endif
@@ -813,7 +835,8 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 
 #if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \
 	!defined(CONFIG_SYS_FSL_DDRC_GEN2) && \
-	!defined(CONFIG_SYS_FSL_DDRC_GEN3)
+	!defined(CONFIG_SYS_FSL_DDRC_GEN3) && \
+	!defined(CONFIG_SYS_FSL_DDRC_GEN4)
 #define CONFIG_SYS_FSL_DDRC_GEN3
 #endif
 
diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h
index c9982cc8ec..4eba85cc34 100644
--- a/arch/powerpc/include/asm/fsl_errata.h
+++ b/arch/powerpc/include/asm/fsl_errata.h
@@ -60,4 +60,20 @@ static inline bool has_erratum_a006261(void)
 }
 #endif
 
+static inline bool has_erratum_a007075(void)
+{
+	u32 svr = get_svr();
+	u32 soc = SVR_SOC_VER(svr);
+
+	switch (soc) {
+	case SVR_B4860:
+	case SVR_B4420:
+		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0);
+	case SVR_P1010:
+		return IS_SVR_REV(svr, 1, 0);
+	case SVR_P4080:
+		return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0);
+	}
+	return false;
+}
 #endif
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index 44bc88dcec..f658bcbc66 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -99,6 +99,10 @@ extern void fdt_fixup_liodn(void *blob);
 	SET_GUTS_LIODN("fsl,esdhc", liodn, sdmmc##sdhcNum##liodnr,\
 		CONFIG_SYS_MPC85xx_ESDHC_OFFSET)
 
+#define SET_QE_LIODN(liodn) \
+	SET_GUTS_LIODN("fsl,qe", liodn, qeliodnr,\
+		CONFIG_SYS_MPC85xx_QE_OFFSET)
+
 #define SET_QMAN_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \
 		CONFIG_SYS_FSL_QMAN_OFFSET, \
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 4c7f0b1cae..29bef910ed 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -10,10 +10,22 @@
 #ifdef CONFIG_SECURE_BOOT
 #if defined(CONFIG_FSL_CORENET)
 #define CONFIG_SYS_PBI_FLASH_BASE		0xc0000000
+#elif defined(CONFIG_BSC9132QDS)
+#define CONFIG_SYS_PBI_FLASH_BASE		0xc8000000
 #else
 #define CONFIG_SYS_PBI_FLASH_BASE		0xce000000
 #endif
 #define CONFIG_SYS_PBI_FLASH_WINDOW		0xcff80000
 
+#if defined(CONFIG_B4860QDS) || \
+	defined(CONFIG_T4240QDS) || \
+	defined(CONFIG_T2080QDS) || \
+	defined(CONFIG_T1040QDS) || \
+	defined(CONFIG_T1040RDB)
+#define CONFIG_SYS_CPC_REINIT_F
+#undef CONFIG_SYS_INIT_L3_ADDR
+#define CONFIG_SYS_INIT_L3_ADDR			0xbff00000
+#endif
+
 #endif
 #endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 4b6f9d018e..741b8618d1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1583,6 +1583,12 @@ typedef struct cpc_corenet {
 typedef struct ccsr_gur {
 	u32	porsr1;		/* POR status 1 */
 	u32	porsr2;		/* POR status 2 */
+#ifdef	CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define	FSL_DCFG_PORSR1_SYSCLK_SHIFT	15
+#define	FSL_DCFG_PORSR1_SYSCLK_MASK	0x1
+#define	FSL_DCFG_PORSR1_SYSCLK_SINGLE_ENDED	0x1
+#define	FSL_DCFG_PORSR1_SYSCLK_DIFF	0x0
+#endif
 	u8	res_008[0x20-0x8];
 	u32	gpporcr1;	/* General-purpose POR configuration */
 	u32	gpporcr2;	/* General-purpose POR configuration 2 */
@@ -1739,6 +1745,8 @@ typedef struct ccsr_gur {
 
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT	16
+/* use reserved bits 18~23 as scratch space to host DDR PLL ratio */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT	8
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK	0x3f
 #if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xfc000000
@@ -1889,7 +1897,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
 	u32	sata2liodnr;	/* SATA 2 LIODN */
 	u32	sata3liodnr;	/* SATA 3 LIODN */
 	u32	sata4liodnr;	/* SATA 4 LIODN */
-	u8	res22[32];
+	u8      res22[24];
+	u32     qeliodnr;       /* QE LIODN */
+	u8      res_57c[4];
 	u32	dma1liodnr;	/* DMA 1 LIODN */
 	u32	dma2liodnr;	/* DMA 2 LIODN */
 	u32	dma3liodnr;	/* DMA 3 LIODN */
@@ -2877,6 +2887,7 @@ struct ccsr_pman {
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_IFC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
+#define CONFIG_SYS_MPC85xx_QE_OFFSET		0x140000
 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET	0x1e0000
 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_PPC_B4860)\
 	&& !defined(CONFIG_PPC_B4420)
@@ -3151,4 +3162,26 @@ struct dcsr_dcfg_regs {
 #define	DCSR_DCFG_ECC_DISABLE_USB2	0x00004000
 	u8  res_524[0x1000 - 0x524]; /* 0x524 - 0x1000 */
 };
+
+#define CONFIG_SYS_MPC85xx_SCFG \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SCFG_OFFSET)
+#define CONFIG_SYS_MPC85xx_SCFG_OFFSET	0xfc000
+/* The supplement configuration unit register */
+struct ccsr_scfg {
+	u32 dpslpcr;	/* 0x000 Deep Sleep Control register */
+	u32 usb1dpslpcsr;/* 0x004 USB1 Deep Sleep Control Status register */
+	u32 usb2dpslpcsr;/* 0x008 USB2 Deep Sleep Control Status register */
+	u32 fmclkdpslpcr;/* 0x00c FM Clock Deep Sleep Control register */
+	u32 res1[4];
+	u32 esgmiiselcr;/* 0x020 Ethernet Switch SGMII Select Control reg */
+	u32 res2;
+	u32 pixclkcr;	/* 0x028 Pixel Clock Control register */
+	u32 res3[245];
+	u32 qeioclkcr;	/* 0x400 QUICC Engine IO Clock Control register */
+	u32 emiiocr;	/* 0x404 EMI MDIO Control Register */
+	u32 sdhciovselcr;/* 0x408 SDHC IO VSEL Control register */
+	u32 qmifrstcr;	/* 0x40c QMAN Interface Reset Control register */
+	u32 res4[60];
+	u32 sparecr[8];	/* 0x500 Spare Control register(0-7) */
+};
 #endif /*__IMMAP_85xx__*/
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cadaeef85a..5aa916f2e2 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -509,6 +509,14 @@ extern void print_tlbcam(void);
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 extern void clear_ddr_tlbs(unsigned int memsize_in_meg);
 
+enum tlb_map_type {
+	TLB_MAP_RAM,
+	TLB_MAP_IO,
+};
+
+extern uint64_t tlb_map_range(ulong v_addr, phys_addr_t p_addr, uint64_t size,
+			      enum tlb_map_type map_type);
+
 extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
 
 #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index f86c6f3e8f..8b03d3aa07 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -343,6 +343,13 @@ void board_init_f(ulong bootflag)
 #ifdef CONFIG_PRAM
 	ulong reg;
 #endif
+#ifdef CONFIG_DEEP_SLEEP
+	const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	struct ccsr_scfg *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+	u32 start_addr;
+	typedef void (*func_t)(void);
+	func_t kernel_resume;
+#endif
 
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -360,6 +367,15 @@ void board_init_f(ulong bootflag)
 		if ((*init_fnc_ptr) () != 0)
 			hang();
 
+#ifdef CONFIG_DEEP_SLEEP
+	/* Jump to kernel in deep sleep case */
+	if (in_be32(&gur->scrtsr[0]) & (1 << 3)) {
+		start_addr = in_be32(&scfg->sparecr[1]);
+		kernel_resume = (func_t)start_addr;
+		kernel_resume();
+	}
+#endif
+
 #ifdef CONFIG_POST
 	post_bootmode_init();
 	post_run(NULL, POST_ROM | post_bootmode_get(NULL));