diff options
| author | Mans Rullgard <mans@mansr.com> | 2010-04-14 11:08:00 +0100 |
|---|---|---|
| committer | Sandeep Paulraj <s-paulraj@ti.com> | 2010-09-08 14:51:04 -0400 |
| commit | 29844707469854d9fab181edd6abe2f25fb5d208 (patch) | |
| tree | 15956c1e6c4d6ec6b8af92bd639e4836205df10b /arch | |
| parent | 7c281c985c33318d0795e43909e0d26f870f98ed (diff) | |
ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functions
On OMAP34xx ES1.0, the L2 enable bit can only be set in secure mode,
so an SMC call to the ROM monitor is required. On later versions,
and on newer devices, this bit is banked and we can set it directly.
The code checked only the ES revision of the chip, and hence incorrectly
used the ROM call on ES1.0 versions of other devices.
This patch adds a check for chip family as well as revision, and also
removes some code duplication between the enable and disable functions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/cache.S | 75 |
1 files changed, 21 insertions, 54 deletions
diff --git a/arch/arm/cpu/armv7/omap3/cache.S b/arch/arm/cpu/armv7/omap3/cache.S index 4b65ac58a5..cb7ca11dab 100644 --- a/arch/arm/cpu/armv7/omap3/cache.S +++ b/arch/arm/cpu/armv7/omap3/cache.S @@ -128,64 +128,31 @@ finished_inval: ldmfd r13!, {r0 - r5, r7, r9 - r12, pc} - -l2_cache_enable: - stmfd r13!, {r0, r1, r2, lr} - @ ES2 onwards we can disable/enable L2 ourselves +l2_cache_set: + stmfd r13!, {r4 - r6, lr} + mov r5, r0 bl get_cpu_rev - cmp r0, #CPU_3XX_ES20 - blt l2_cache_disable_EARLIER_THAN_ES2 - mrc 15, 0, r3, cr1, cr0, 1 - orr r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - b l2_cache_enable_END -l2_cache_enable_EARLIER_THAN_ES2: - @ Save r0, r12 and restore them after usage - mov r3, ip - str r3, [sp, #4] - mov r3, r0 - @ + mov r4, r0 + bl get_cpu_family + @ ES2 onwards we can disable/enable L2 ourselves + cmp r0, #CPU_OMAP34XX + cmpeq r4, #CPU_3XX_ES10 + mrc 15, 0, r0, cr1, cr0, 1 + bic r0, r0, #2 + orr r0, r0, r5, lsl #1 + mcreq 15, 0, r0, cr1, cr0, 1 @ GP Device ROM code API usage here @ r12 = AUXCR Write function and r0 value - @ mov ip, #3 - mrc 15, 0, r0, cr1, cr0, 1 - orr r0, r0, #2 - @ SMI instruction to call ROM Code API - .word 0xe1600070 - mov r0, r3 - mov ip, r3 - str r3, [sp, #4] -l2_cache_enable_END: - ldmfd r13!, {r1, r2, r3, pc} + @ SMCNE instruction to call ROM Code API + .word 0x11600070 + ldmfd r13!, {r4 - r6, pc} +l2_cache_enable: + mov r0, #1 + b l2_cache_set l2_cache_disable: - stmfd r13!, {r0, r1, r2, lr} - @ ES2 onwards we can disable/enable L2 ourselves - bl get_cpu_rev - cmp r0, #CPU_3XX_ES20 - blt l2_cache_disable_EARLIER_THAN_ES2 - mrc 15, 0, r3, cr1, cr0, 1 - bic r3, r3, #2 - mcr 15, 0, r3, cr1, cr0, 1 - b l2_cache_disable_END -l2_cache_disable_EARLIER_THAN_ES2: - @ Save r0, r12 and restore them after usage - mov r3, ip - str r3, [sp, #4] - mov r3, r0 - @ - @ GP Device ROM code API usage here - @ r12 = AUXCR Write function and r0 value - @ - mov ip, #3 - mrc 15, 0, r0, cr1, cr0, 1 - bic r0, r0, #2 - @ SMI instruction to call ROM Code API - .word 0xe1600070 - mov r0, r3 - mov ip, r3 - str r3, [sp, #4] -l2_cache_disable_END: - ldmfd r13!, {r1, r2, r3, pc} + mov r0, #0 + b l2_cache_set + |