Merge git://git.denx.de/u-boot-fsl-qoriq

18 files changed, 118 insertions, 54 deletions

diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 3a9913a86b..5fac252c0e 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -12,7 +12,7 @@ obj-y	+= cache_v7.o cache_v7_asm.o
 obj-y	+= cpu.o cp15.o
 obj-y	+= syslib.o
 
-ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_LS102XA),)
+ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_MX7)$(CONFIG_TI81XX)$(CONFIG_AT91FAMILY)$(CONFIG_ARCH_SUNXI)$(CONFIG_ARCH_SOCFPGA)$(CONFIG_ARCH_MX7ULP)$(CONFIG_ARCH_LS1021A),)
 ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
 obj-y	+= lowlevel_init.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index b24462bede..12fd80e7db 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -36,6 +36,7 @@ config ARCH_LS1046A
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_ERRATUM_A008336
 	select SYS_FSL_ERRATUM_A008511
+	select SYS_FSL_ERRATUM_A008850
 	select SYS_FSL_ERRATUM_A009801
 	select SYS_FSL_ERRATUM_A009803
 	select SYS_FSL_ERRATUM_A009942
@@ -63,6 +64,8 @@ config ARCH_LS2080A
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
 	select SYS_FSL_SRDS_2
+	select FSL_TZASC_1
+	select FSL_TZASC_2
 	select SYS_FSL_ERRATUM_A008336
 	select SYS_FSL_ERRATUM_A008511
 	select SYS_FSL_ERRATUM_A008514
@@ -171,6 +174,20 @@ config SYS_LS_PPA_FW_ADDR
 	  QSPI flash, this address is a directly memory-mapped.
 	  If it is in a serial accessed flash, such as NAND and SD
 	  card, it is a byte offset.
+
+config SYS_LS_PPA_ESBC_ADDR
+	hex "hdr address of PPA firmware loading from"
+	depends on FSL_LS_PPA && CHAIN_OF_TRUST
+	default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+	default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+	default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+	default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+	help
+	  If the PPA header firmware locate at XIP flash, such as NOR or
+	  QSPI flash, this address is a directly memory-mapped.
+	  If it is in a serial accessed flash, such as NAND and SD
+	  card, it is a byte offset.
+
 endmenu
 
 config SYS_FSL_ERRATUM_A010315
@@ -223,6 +240,12 @@ config SYS_FSL_SRDS_2
 config SYS_HAS_SERDES
 	bool
 
+config FSL_TZASC_1
+	bool
+
+config FSL_TZASC_2
+	bool
+
 endmenu
 
 menu "Layerscape clock tree configuration"
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index c9ab93e3d7..e3ce0184d8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -22,11 +22,11 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
 endif
 endif
 
-ifneq ($(CONFIG_LS2080A),)
+ifneq ($(CONFIG_ARCH_LS2080A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
 endif
 
-ifneq ($(CONFIG_LS1043A),)
+ifneq ($(CONFIG_ARCH_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index d446527616..c24f3f173c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -92,7 +92,7 @@ static inline void early_mmu_setup(void)
 
 static void fix_pcie_mmu_map(void)
 {
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	unsigned int i;
 	u32 svr, ver;
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -523,7 +523,7 @@ int timer_init(void)
 #ifdef CONFIG_FSL_LSCH3
 	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 #endif
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 	u32 svr_dev_id;
 #endif
@@ -541,7 +541,7 @@ int timer_init(void)
 	out_le32(cltbenr, 0xf);
 #endif
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	/*
 	 * In certain Layerscape SoCs, the clock for each core's
 	 * has an enable bit in the PMU Physical Core Time Base Enable
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 762a95b945..05c4577753 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -373,8 +373,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 #endif
 
-	do_fixup_by_compat_u32(blob, "fixed-clock",
-			       "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",
+			     CONFIG_SYS_CLK_FREQ, 1);
 
 #ifdef CONFIG_PCI
 	ft_pci_setup(blob, bd);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index a2185f2def..f427356104 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -76,7 +76,7 @@ ENTRY(lowlevel_init)
 #ifdef CONFIG_FSL_LSCH3
 
 	/* Set Wuo bit for RN-I 20 */
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	ldr	x0, =CCI_AUX_CONTROL_BASE(20)
 	ldr	x1, =0x00000010
 	bl	ccn504_set_aux
@@ -229,38 +229,40 @@ ENTRY(lowlevel_init)
 	 * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
 	 * 	 placeholders.
 	 */
+#ifdef CONFIG_FSL_TZASC_1
 	ldr	x1, =TZASC_GATE_KEEPER(0)
 	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
 	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
 	str	w0, [x1]
 
-	ldr	x1, =TZASC_GATE_KEEPER(1)
-	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
-	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
-	str	w0, [x1]
-
 	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(0)
 	ldr	w0, [x1]		/* Region-0 Attributes Register */
 	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
 	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
 	str	w0, [x1]
 
+	ldr	x1, =TZASC_REGION_ID_ACCESS_0(0)
+	ldr	w0, [x1]		/* Region-0 Access Register */
+	mov	w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
+	str	w0, [x1]
+#endif
+#ifdef CONFIG_FSL_TZASC_2
+	ldr	x1, =TZASC_GATE_KEEPER(1)
+	ldr	w0, [x1]		/* Filter 0 Gate Keeper Register */
+	orr	w0, w0, #1 << 0		/* Set open_request for Filter 0 */
+	str	w0, [x1]
+
 	ldr	x1, =TZASC_REGION_ATTRIBUTES_0(1)
 	ldr	w0, [x1]		/* Region-1 Attributes Register */
 	orr	w0, w0, #1 << 31	/* Set Sec global write en, Bit[31] */
 	orr	w0, w0, #1 << 30	/* Set Sec global read en, Bit[30] */
 	str	w0, [x1]
 
-	ldr	x1, =TZASC_REGION_ID_ACCESS_0(0)
-	ldr	w0, [x1]		/* Region-0 Access Register */
-	mov	w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
-	str	w0, [x1]
-
 	ldr	x1, =TZASC_REGION_ID_ACCESS_0(1)
 	ldr	w0, [x1]		/* Region-1 Attributes Register */
 	mov	w0, #0xFFFFFFFF		/* Set nsaid_wr_en and nsaid_rd_en */
 	str	w0, [x1]
-
+#endif
 	isb
 	dsb	sy
 #endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index ab83e85adc..4db3c76d72 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -70,6 +70,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 		SATA2 } },
 	{0x4A, {SGMII9, SGMII10, SGMII11, SGMII12, PCIE4, PCIE4, SATA1,
 		SATA2 } },
+	{0x51, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
 	{0x57, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII15, SGMII16 } },
 	{}
 };
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index b35ad5fb6f..7f87bb8689 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -178,7 +178,7 @@ int ppa_init(void)
 	ppa_img_addr = (uintptr_t)ppa_fit_addr;
 	if (fsl_check_boot_mode_secure() != 0) {
 		ret = fsl_secboot_validate(ppa_esbc_hdr,
-					   CONFIG_PPA_KEY_HASH,
+					   PPA_KEY_HASH,
 					   &ppa_img_addr);
 		if (ret != 0)
 			printf("PPA validation failed\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 73a8680741..eb730e84a4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -41,13 +41,31 @@ u32 spl_boot_mode(const u32 boot_device)
 }
 
 #ifdef CONFIG_SPL_BUILD
+
+void spl_board_init(void)
+{
+#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2)
+	/*
+	 * In case of Secure Boot, the IBR configures the SMMU
+	 * to allow only Secure transactions.
+	 * SMMU must be reset in bypass mode.
+	 * Set the ClientPD bit and Clear the USFCFG Bit
+	*/
+	u32 val;
+	val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_SCR0, val);
+	val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+	out_le32(SMMU_NSCR0, val);
+#endif
+}
+
 void board_init_f(ulong dummy)
 {
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
 	board_early_init_f();
 	timer_init();
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	env_init();
 #endif
 	get_clocks();
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ce34e3eeff..53fc936f02 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -166,7 +166,7 @@ dtb-$(CONFIG_TARGET_AM57XX_EVM) += am57xx-beagle-x15.dtb \
 	am571x-idk.dtb
 dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
-dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
+dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \
 	ls1021a-qds-lpuart.dtb \
 	ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
 	ls1021a-iot-duart.dtb
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index b5b08aae23..93e6597d9e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -18,7 +18,7 @@
  */
 #define CONFIG_SYS_MEM_RESERVE_SECURE	(2048 * 1024)	/* 2MB */
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
 #define	SRDS_MAX_LANES	8
 #define CONFIG_SYS_PAGE_SIZE		0x10000
@@ -132,7 +132,7 @@
 #define CONFIG_SYS_FSL_PEX_LUT_BE
 
 /* SoC related */
-#ifdef CONFIG_LS1043A
+#ifdef CONFIG_ARCH_LS1043A
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
 #define CONFIG_SYS_NUM_FM1_DTSEC		7
@@ -185,7 +185,12 @@
 #elif defined(CONFIG_ARCH_LS1012A)
 #define GICD_BASE		0x01401000
 #define GICC_BASE		0x01402000
-
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SEC_MON_BE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC           1
 #define CONFIG_SYS_DDR_BLOCK1_SIZE	((phys_size_t)2 << 30)
 #define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_DDR_BLOCK1_SIZE
 
@@ -199,7 +204,7 @@
 
 #define CONFIG_SYS_FSL_IFC_BE
 #define CONFIG_SYS_FSL_SFP_VER_3_2
-#define CONFIG_SYS_FSL_SNVS_LE
+#define CONFIG_SYS_FSL_SEC_MON_BE
 #define CONFIG_SYS_FSL_SFP_BE
 #define CONFIG_SYS_FSL_SRK_LE
 #define CONFIG_KEY_REVOCATION
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index bcf3e3863e..95c3e2fc08 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -249,7 +249,7 @@ static struct mm_region final_map[] = {
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
 	  CONFIG_SYS_PCIE4_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index 70181c5077..a8f9a50501 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 enum srds_prtcl {
 	/*
 	 * Nobody will check whether the device 'NONE' has been configured,
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 2f7233f2fe..5c4da0f0e3 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -108,7 +108,7 @@
 
 #define DCU_LAYER_MAX_NUM			16
 
-#ifdef CONFIG_LS102XA
+#ifdef CONFIG_ARCH_LS1021A
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #else
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 1ad221a987..5674d37c04 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -14,7 +14,7 @@
 #define CONFIG_STATIC_RELA
 #endif
 
-#if defined(CONFIG_LS102XA) || \
+#if defined(CONFIG_ARCH_LS1021A) || \
 	defined(CONFIG_CPU_PXA27X) || \
 	defined(CONFIG_CPU_MONAHANS) || \
 	defined(CONFIG_CPU_PXA25X) || \
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index d98a1e8f89..f5ca5d3b69 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -27,10 +27,11 @@
 #define CONFIG_SPL_UBOOT_KEY_HASH	NULL
 #endif /* ifdef CONFIG_SPL_BUILD */
 
+#define CONFIG_KEY_REVOCATION
+
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_CMD_BLOB
 #define CONFIG_CMD_HASH
-#define CONFIG_KEY_REVOCATION
 #ifndef CONFIG_SYS_RAMBOOT
 /* The key used for verification of next level images
  * is picked up from an Extension Table which has
@@ -46,14 +47,15 @@
 
 #endif
 
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A)
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
- * Similiarly for LS2080
+#if defined(CONFIG_FSL_LAYERSCAPE)
+/*
+ * For fsl layerscape based platforms, ESBC image Address in Header
+ * is 64 bit.
  */
 #define CONFIG_ESBC_ADDR_64BIT
 #endif
 
-#ifdef CONFIG_LS2080A
+#ifdef CONFIG_ARCH_LS2080A
 #define CONFIG_EXTRA_ENV \
 	"setenv fdt_high 0xa0000000;"	\
 	"setenv initrd_high 0xcfffffff;"	\
@@ -68,7 +70,7 @@
 /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
  * Non-XIP Memory (Nand/SD)*/
 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
-	defined(CONFIG_SD_BOOT)
+	defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
 #define CONFIG_BOOTSCRIPT_COPY_RAM
 #endif
 /* The address needs to be modified according to NOR, NAND, SD and
@@ -86,16 +88,37 @@
 /* For SD boot address and size are assigned in terms of sector
  * offset and no. of sectors respectively.
  */
-#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000900
+#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x00000920
+#else
+#define CONFIG_BS_HDR_ADDR_DEVICE       0x00000900
+#endif
 #define CONFIG_BS_ADDR_DEVICE		0x00000940
 #define CONFIG_BS_HDR_SIZE		0x00000010
 #define CONFIG_BS_SIZE			0x00000008
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_BS_HDR_ADDR_DEVICE      0x00800000
+#define CONFIG_BS_ADDR_DEVICE          0x00802000
+#define CONFIG_BS_HDR_SIZE             0x00002000
+#define CONFIG_BS_SIZE                 0x00001000
+#elif defined(CONFIG_QSPI_BOOT)
+#ifdef CONFIG_ARCH_LS1046A
+#define CONFIG_BS_HDR_ADDR_DEVICE	0x40780000
+#define CONFIG_BS_ADDR_DEVICE		0x40800000
+#elif defined(CONFIG_ARCH_LS1012A)
+#define CONFIG_BS_HDR_ADDR_DEVICE      0x400c0000
+#define CONFIG_BS_ADDR_DEVICE          0x40060000
 #else
+#error "Platform not supported"
+#endif
+#define CONFIG_BS_HDR_SIZE		0x00002000
+#define CONFIG_BS_SIZE			0x00001000
+#else /* Default NOR Boot */
 #define CONFIG_BS_HDR_ADDR_DEVICE	0x600a0000
 #define CONFIG_BS_ADDR_DEVICE		0x60060000
 #define CONFIG_BS_HDR_SIZE		0x00002000
 #define CONFIG_BS_SIZE			0x00001000
-#endif /* #ifdef CONFIG_SD_BOOT */
+#endif
 #define CONFIG_BS_HDR_ADDR_RAM		0x81000000
 #define CONFIG_BS_ADDR_RAM		0x81020000
 #endif
@@ -109,23 +132,13 @@
 #endif
 
 #ifdef CONFIG_FSL_LS_PPA
-#ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
-#ifdef CONFIG_LS1043A
-#define CONFIG_SYS_LS_PPA_ESBC_ADDR	0x600c0000
-#elif defined(CONFIG_FSL_LSCH3)
-#define CONFIG_SYS_LS_PPA_ESBC_ADDR     0x580c40000
-#endif
-#else
-#error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
-#endif /* ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP */
-
 /* Define the key hash here if SRK used for signing PPA image is
  * different from SRK hash put in SFP used for U-Boot.
  * Example
- * #define CONFIG_PPA_KEY_HASH \
+ * #define PPA_KEY_HASH \
  *	"41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
  */
-#define CONFIG_PPA_KEY_HASH		NULL
+#define PPA_KEY_HASH		NULL
 #endif /* ifdef CONFIG_FSL_LS_PPA */
 
 #include <config_fsl_chain_trust.h>
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index eb817f1e86..63fdffddb1 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1145,8 +1145,9 @@ switch_as:
 	li	r0,0
 1:
 	dcbz	r0,r3
-#ifdef CONFIG_E6500	/* Lock/unlock L2 cache instead of L1 */
+#ifdef CONFIG_E6500	/* Lock/unlock L2 cache long with L1 */
 	dcbtls	2, r0, r3
+	dcbtls	0, r0, r3
 #else
 	dcbtls	0, r0, r3
 #endif
@@ -1790,8 +1791,9 @@ unlock_ram_in_cache:
 	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r4
 1:	dcbi	r0,r3
-#ifdef CONFIG_E6500	/* lock/unlock L2 cache instead of L1 */
+#ifdef CONFIG_E6500	/* lock/unlock L2 cache long with L1 */
 	dcblc	2, r0, r3
+	dcblc	0, r0, r3
 #else
 	dcblc	r0,r3
 #endif
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 1b7cf0996b..2b5a2913ec 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -100,11 +100,11 @@
 #endif /* ifdef CONFIG_SPL_BUILD */
 
 #define CONFIG_CMD_ESBC_VALIDATE
-#define CONFIG_CMD_BLOB
 #define CONFIG_FSL_SEC_MON
 #define CONFIG_SHA_PROG_HW_ACCEL
 
 #ifndef CONFIG_SPL_BUILD
+#define CONFIG_CMD_BLOB
 /*
  * fsl_setenv_chain_of_trust() must be called from
  * board_late_init()