diff options
author | Tom Rini <trini@ti.com> | 2013-06-13 15:16:15 -0400 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-06-13 15:16:15 -0400 |
commit | 41341221d12341a2ecfb280142d6478071738fc2 (patch) | |
tree | 850a87b274b572b65a579474a0aad5e590ca6d61 /arch | |
parent | b7ab8b8ff092ab8214eeb86e8a79573154f448b9 (diff) | |
parent | 847e6693ccb529bf8346db62876f38f0c4e04ade (diff) |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Small conflict over DRA7XX updates and adding SRAM_SCRATCH_SPACE_ADDR
Conflicts:
arch/arm/include/asm/arch-omap5/omap.h
Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'arch')
56 files changed, 2327 insertions, 1192 deletions
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index edf249d902..a7e0c28c90 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -142,24 +142,6 @@ reset: orr r0,r0,#0xd3 msr cpsr,r0 -#ifdef CONFIG_OMAP2420H4 - /* Copy vectors to mask ROM indirect addr */ - adr r0, _start /* r0 <- current position of code */ - add r0, r0, #4 /* skip reset vector */ - mov r2, #64 /* r2 <- size to copy */ - add r2, r0, r2 /* r2 <- source end address */ - mov r1, #SRAM_OFFSET0 /* build vect addr */ - mov r3, #SRAM_OFFSET1 - add r1, r1, r3 - mov r3, #SRAM_OFFSET2 - add r1, r1, r3 -next: - ldmia r0!, {r3-r10} /* copy from source address [r0] */ - stmia r1!, {r3-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - bne next /* loop until equal */ - bl cpy_clk_code /* put dpll adjust code behind vectors */ -#endif /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT bl cpu_init_crit diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index dec7bfbfaa..bba4671f78 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_SOC_DM646X) += dm646x.o +COBJS-$(CONFIG_SOC_DA830) += da830_pinmux.o COBJS-$(CONFIG_SOC_DA850) += da850_pinmux.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c new file mode 100644 index 0000000000..d0c964a349 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c @@ -0,0 +1,151 @@ +/* + * Pinmux configurations for the DA830 SoCs + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/davinci_misc.h> +#include <asm/arch/hardware.h> +#include <asm/arch/pinmux_defs.h> + +/* SPI0 pin muxer settings */ +const struct pinmux_config spi0_pins_base[] = { + { pinmux(7), 1, 3 }, /* SPI0_SOMI */ + { pinmux(7), 1, 4 }, /* SPI0_SIMO */ + { pinmux(7), 1, 6 } /* SPI0_CLK */ +}; + +const struct pinmux_config spi0_pins_scs0[] = { + { pinmux(7), 1, 7 } /* SPI0_SCS[0] */ +}; + +const struct pinmux_config spi0_pins_ena[] = { + { pinmux(7), 1, 5 } /* SPI0_ENA */ +}; + +/* NAND pin muxer settings */ +const struct pinmux_config emifa_pins_cs0[] = { + { pinmux(18), 1, 2 } /* EMA_CS[0] */ +}; + +const struct pinmux_config emifa_pins_cs2[] = { + { pinmux(18), 1, 3 } /* EMA_CS[2] */ +}; + +const struct pinmux_config emifa_pins_cs3[] = { + { pinmux(18), 1, 4 } /* EMA_CS[3] */ +}; + +#ifdef CONFIG_USE_NAND +const struct pinmux_config emifa_pins[] = { + { pinmux(13), 1, 6 }, /* EMA_D[0] */ + { pinmux(13), 1, 7 }, /* EMA_D[1] */ + { pinmux(14), 1, 0 }, /* EMA_D[2] */ + { pinmux(14), 1, 1 }, /* EMA_D[3] */ + { pinmux(14), 1, 2 }, /* EMA_D[4] */ + { pinmux(14), 1, 3 }, /* EMA_D[5] */ + { pinmux(14), 1, 4 }, /* EMA_D[6] */ + { pinmux(14), 1, 5 }, /* EMA_D[7] */ + { pinmux(14), 1, 6 }, /* EMA_D[8] */ + { pinmux(14), 1, 7 }, /* EMA_D[9] */ + { pinmux(15), 1, 0 }, /* EMA_D[10] */ + { pinmux(15), 1, 1 }, /* EMA_D[11] */ + { pinmux(15), 1, 2 }, /* EMA_D[12] */ + { pinmux(15), 1, 3 }, /* EMA_D[13] */ + { pinmux(15), 1, 4 }, /* EMA_D[14] */ + { pinmux(15), 1, 5 }, /* EMA_D[15] */ + { pinmux(15), 1, 6 }, /* EMA_A[0] */ + { pinmux(15), 1, 7 }, /* EMA_A[1] */ + { pinmux(16), 1, 0 }, /* EMA_A[2] */ + { pinmux(16), 1, 1 }, /* EMA_A[3] */ + { pinmux(16), 1, 2 }, /* EMA_A[4] */ + { pinmux(16), 1, 3 }, /* EMA_A[5] */ + { pinmux(16), 1, 4 }, /* EMA_A[6] */ + { pinmux(16), 1, 5 }, /* EMA_A[7] */ + { pinmux(16), 1, 6 }, /* EMA_A[8] */ + { pinmux(16), 1, 7 }, /* EMA_A[9] */ + { pinmux(17), 1, 0 }, /* EMA_A[10] */ + { pinmux(17), 1, 1 }, /* EMA_A[11] */ + { pinmux(17), 1, 2 }, /* EMA_A[12] */ + { pinmux(17), 1, 3 }, /* EMA_BA[1] */ + { pinmux(17), 1, 4 }, /* EMA_BA[0] */ + { pinmux(17), 1, 5 }, /* EMA_CLK */ + { pinmux(17), 1, 6 }, /* EMA_SDCKE */ + { pinmux(17), 1, 7 }, /* EMA_CAS */ + { pinmux(18), 1, 0 }, /* EMA_CAS */ + { pinmux(18), 1, 1 }, /* EMA_WE */ + { pinmux(18), 1, 5 }, /* EMA_OE */ + { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */ + { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */ + { pinmux(10), 1, 0 } /* Tristate */ +}; +#endif + +/* EMAC PHY interface pins */ +const struct pinmux_config emac_pins_rmii[] = { + { pinmux(10), 2, 1 }, /* RMII_TXD[0] */ + { pinmux(10), 2, 2 }, /* RMII_TXD[1] */ + { pinmux(10), 2, 3 }, /* RMII_TXEN */ + { pinmux(10), 2, 4 }, /* RMII_CRS_DV */ + { pinmux(10), 2, 5 }, /* RMII_RXD[0] */ + { pinmux(10), 2, 6 }, /* RMII_RXD[1] */ + { pinmux(10), 2, 7 } /* RMII_RXER */ +}; + +const struct pinmux_config emac_pins_mdio[] = { + { pinmux(11), 2, 0 }, /* MDIO_CLK */ + { pinmux(11), 2, 1 } /* MDIO_D */ +}; + +const struct pinmux_config emac_pins_rmii_clk_source[] = { + { pinmux(9), 0, 5 } /* ref.clk from external source */ +}; + +/* UART2 pin muxer settings */ +const struct pinmux_config uart2_pins_txrx[] = { + { pinmux(8), 2, 7 }, /* UART2_RXD */ + { pinmux(9), 2, 0 } /* UART2_TXD */ +}; + +/* I2C0 pin muxer settings */ +const struct pinmux_config i2c0_pins[] = { + { pinmux(8), 2, 3 }, /* I2C0_SDA */ + { pinmux(8), 2, 4 } /* I2C0_SCL */ +}; + +/* USB0_DRVVBUS pin muxer settings */ +const struct pinmux_config usb_pins[] = { + { pinmux(9), 1, 1 } /* USB0_DRVVBUS */ +}; + +#ifdef CONFIG_DAVINCI_MMC +/* MMC0 pin muxer settings */ +const struct pinmux_config mmc0_pins_8bit[] = { + { pinmux(15), 2, 7 }, /* MMCSD0_CLK */ + { pinmux(16), 2, 0 }, /* MMCSD0_CMD */ + { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */ + { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */ + { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */ + { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */ + { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */ + { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */ + { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */ + { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */ + /* DA830 supports 8-bit mode */ +}; +#endif diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index a5e388b5ad..45667bd8fb 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -76,13 +76,32 @@ void enable_caches(void) #endif } +/* + * This function will craft a jumptable at 0x0 which will redirect interrupt + * vectoring to proper location of U-Boot in RAM. + * + * The structure of the jumptable will be as follows: + * ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times + * <destination address> ... for each previous ldr, thus also repeated 8 times + * + * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at + * offset 0x18 from current value of PC register. Note that PC is already + * incremented by 4 when computing the offset, so the effective offset is + * actually 0x20, this the associated <destination address>. Loading the PC + * register with an address performs a jump to that address. + */ void mx28_fixup_vt(uint32_t start_addr) { - uint32_t *vt = (uint32_t *)0x20; + /* ldr pc, [pc, #0x18] */ + const uint32_t ldr_pc = 0xe59ff018; + /* Jumptable location is 0x0 */ + uint32_t *vt = (uint32_t *)0x0; int i; - for (i = 0; i < 8; i++) - vt[i] = start_addr + (4 * i); + for (i = 0; i < 8; i++) { + vt[i] = ldr_pc; + vt[i + 8] = start_addr + (4 * i); + } } #ifdef CONFIG_ARCH_MISC_INIT diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 55e82ba369..c4b9809ad0 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -34,6 +34,7 @@ COBJS += hwinit-common.o COBJS += clocks-common.o COBJS += emif-common.o COBJS += vc.o +COBJS += abb.o endif ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c new file mode 100644 index 0000000000..87d1fb82eb --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/abb.c @@ -0,0 +1,137 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> + +__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + return -1; +} + +static void abb_setup_timings(u32 setup) +{ + u32 sys_rate, sr2_cnt, clk_cycles; + + /* + * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a + * transition and must be programmed with the correct time at boot. + * The value programmed into the register is the number of SYS_CLK + * clock cycles that match a given wall time profiled for the ldo. + * This value depends on: + * settling time of ldo in micro-seconds (varies per OMAP family), + * of clock cycles per SYS_CLK period (varies per OMAP family), + * the SYS_CLK frequency in MHz (varies per board) + * The formula is: + * + * ldo settling time (in micro-seconds) + * SR2_WTCNT_VALUE = ------------------------------------------ + * (# system clock cycles) * (sys_clk period) + * + * Put another way: + * + * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) + * + * To avoid dividing by zero multiply both "# clock cycles" and + * "settling time" by 10 such that the final result is the one we want. + */ + + /* calculate SR2_WTCNT_VALUE */ + sys_rate = DIV_ROUND(V_OSCK, 1000000); + clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); + sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); + + setbits_le32(setup, + sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); +} + +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp) +{ + u32 abb_type_mask, opp_sel_mask; + + /* sanity check */ + if (!setup || !control || !txdone) + return; + + /* setup ABB only in case of Fast or Slow OPP */ + switch (opp) { + case OMAP_ABB_FAST_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; + break; + case OMAP_ABB_SLOW_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; + break; + default: + return; + } + + /* + * For some OMAP silicons additional setup for LDOVBB register is + * required. This is determined by data retrieved from corresponding + * OPP EFUSE register. Data, which is retrieved from EFUSE - is + * ABB enable/disable flag and VSET value, which must be copied + * to LDOVBB register. If function call fails - return quietly, + * it means no ABB is required for such silicon. + * + * For silicons, which don't require LDOVBB setup "fuse" and + * "ldovbb" offsets are not defined. ABB will be initialized in + * the common way for them. + */ + if (fuse && ldovbb) { + if (abb_setup_ldovbb(fuse, ldovbb)) + return; + } + + /* clear ABB registers */ + writel(0, setup); + writel(0, control); + + /* configure timings, based on oscillator value */ + abb_setup_timings(setup); + + /* clear pending interrupts before setup */ + setbits_le32(txdone, txdone_mask); + + /* select ABB type */ + setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); + + /* initiate ABB ldo change */ + setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); + + /* wait until transition complete */ + if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) + puts("Error: ABB txdone is not set\n"); + + /* clear ABB tranxdone */ + setbits_le32(txdone, txdone_mask); +} diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 99910cdcb0..ef23127bb6 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -30,9 +30,10 @@ * MA 02111-1307 USA */ #include <common.h> +#include <i2c.h> #include <asm/omap_common.h> #include <asm/gpio.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> @@ -49,13 +50,12 @@ const u32 sys_clk_array[8] = { 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ + 20000000, /* 20 MHz */ 16800000, /* 16.8 MHz */ 19200000, /* 19.2 MHz */ 26000000, /* 26 MHz */ 27000000, /* 27 MHz */ 38400000, /* 38.4 MHz */ - 20000000, /* 20 MHz */ }; static inline u32 __get_sys_clk_index(void) @@ -74,13 +74,6 @@ static inline u32 __get_sys_clk_index(void) /* SYS_CLKSEL - 1 to match the dpll param array indices */ ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; - /* - * SYS_CLKSEL value for 20MHz is 0. This is introduced newly - * in DRA7XX socs. SYS_CLKSEL -1 will be greater than - * NUM_SYS_CLK. So considering the last 3 bits as the index - * for the dpll param array. - */ - ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -440,6 +433,12 @@ static void setup_non_essential_dplls(void) params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; + + if (omap_revision() == DRA752_ES1_0) + /* Select the sys clk for dpll_abe */ + clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel, + CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK, + CM_ABE_PLL_SYS_CLKSEL_SYSCLK2); #else abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK; /* @@ -487,6 +486,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) u32 offset = volt_mv; int ret = 0; + if (!volt_mv) + return; + + pmic->pmic_bus_init(); /* See if we can first get the GPIO if needed */ if (pmic->gpio_en) ret = gpio_request(pmic->gpio, "PMIC_GPIO"); @@ -509,14 +512,45 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); - if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, - vcore_reg, offset_code)) + if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); if (pmic->gpio_en) gpio_direction_output(pmic->gpio, 1); } +static u32 optimize_vcore_voltage(struct volts const *v) +{ + u32 val; + if (!v->value) + return 0; + if (!v->efuse.reg) + return v->value; + + switch (v->efuse.reg_bits) { + case 16: + val = readw(v->efuse.reg); + break; + case 32: + val = readl(v->efuse.reg); + break; + default: + printf("Error: efuse 0x%08x bits=%d unknown\n", + v->efuse.reg, v->efuse.reg_bits); + return v->value; + } + + if (!val) { + printf("Error: efuse 0x%08x bits=%d val=0, using %d\n", + v->efuse.reg, v->efuse.reg_bits, v->value); + return v->value; + } + + debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n", + __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val); + return val; +} + /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -525,16 +559,34 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) */ void scale_vcores(struct vcores_data const *vcores) { - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + u32 val; + + val = optimize_vcore_voltage(&vcores->core); + do_scale_vcore(vcores->core.addr, val, vcores->core.pmic); + + val = optimize_vcore_voltage(&vcores->mpu); + do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic); + + /* Configure MPU ABB LDO after scale */ + abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2, + (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl, + (*prcm)->prm_abbldo_mpu_setup, + (*prcm)->prm_abbldo_mpu_ctrl, + (*prcm)->prm_irqstatus_mpu_2, + OMAP_ABB_MPU_TXDONE_MASK, + OMAP_ABB_FAST_OPP); - do_scale_vcore(vcores->core.addr, vcores->core.value, - vcores->core.pmic); + val = optimize_vcore_voltage(&vcores->mm); + do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic); - do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, - vcores->mpu.pmic); + val = optimize_vcore_voltage(&vcores->gpu); + do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic); - do_scale_vcore(vcores->mm.addr, vcores->mm.value, - vcores->mm.pmic); + val = optimize_vcore_voltage(&vcores->eve); + do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic); + + val = optimize_vcore_voltage(&vcores->iva); + do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { /* Configure LDO SRAM "magic" bits */ @@ -710,6 +762,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); + timer_init(); scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL @@ -725,3 +778,13 @@ void prcm_init(void) if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context()) enable_basic_uboot_clocks(); } + +void gpi2c_init(void) +{ + static int gpi2c = 1; + + if (gpi2c) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + gpi2c = 0; + } +} diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 11e830a533..652e5a71b3 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -27,7 +27,7 @@ #include <common.h> #include <asm/emif.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> #include <asm/utils.h> @@ -209,7 +209,8 @@ void emif_update_timings(u32 base, const struct emif_regs *regs) writel(regs->temp_alert_config, &emif->emif_temp_alert_config); writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); - if (omap_revision() >= OMAP5430_ES1_0) { + if ((omap_revision() >= OMAP5430_ES1_0) || + (omap_revision() == DRA752_ES1_0)) { writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); } else if (omap_revision() >= OMAP4460_ES1_0) { @@ -263,6 +264,18 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) __udelay(130); } +static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + config_data_eye_leveling_samples(base); + + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + writel(regs->sdram_config, &emif->emif_sdram_config); +} + static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -273,6 +286,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) * defined, contents of mode Registers must be fully initialized. * H/W takes care of this initialization */ + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); writel(regs->sdram_config_init, &emif->emif_sdram_config); writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); @@ -290,7 +304,10 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); - ddr3_leveling(base, regs); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); } #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -1078,7 +1095,10 @@ static void do_sdram_init(u32 base) if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { set_lpmode_selfrefresh(base); emif_reset_phy(base); - ddr3_leveling(base, regs); + if (omap_revision() == DRA752_ES1_0) + ddr3_sw_leveling(base, regs); + else + ddr3_leveling(base, regs); } /* Write to the shadow registers */ diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 0776d5c6e8..5df116edbe 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -166,8 +166,6 @@ void s_init(void) #endif prcm_init(); #ifdef CONFIG_SPL_BUILD - timer_init(); - /* For regular u-boot sdram_init() is called from dram_init() */ sdram_init(); #endif diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 507f6873e9..5926a5a810 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -35,6 +35,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index e6e5f7893c..a68f1d145d 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -17,6 +17,7 @@ #include <common.h> #include <asm/omap_common.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> /* * Define Master code if there are multiple masters on the I2C_SR bus. @@ -57,7 +58,7 @@ * omap_vc_init() - Initialization for Voltage controller * @speed_khz: I2C buspeed in KHz */ -void omap_vc_init(u16 speed_khz) +static void omap_vc_init(u16 speed_khz) { u32 val; u32 sys_clk_khz, cycles_hi, cycles_low; @@ -137,3 +138,14 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) /* All good.. */ return 0; } + +void sri2c_init(void) +{ + static int sri2c = 1; + + if (sri2c) { + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + sri2c = 0; + } + return; +} diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 09c51f62aa..81cc859780 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -27,7 +27,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/arch/clocks_omap3.h> #include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 06a2fc8c2f..b97cad4364 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -29,7 +29,7 @@ #include <asm/arch/omap.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_gpio.h> #include <asm/io.h> @@ -219,6 +219,9 @@ struct pmic_data twl6030_4430es1 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data twl6030 = { @@ -226,6 +229,9 @@ struct pmic_data twl6030 = { .step = 12660, /* 12.66 mV represented in uV */ /* The code starts at 1 not 0 */ .start_code = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct pmic_data tps62361 = { @@ -233,7 +239,10 @@ struct pmic_data tps62361 = { .step = 10000, /* 10 mV represented in uV */ .start_code = 0, .gpio = TPS62361_VSEL0_GPIO, - .gpio_en = 1 + .gpio_en = 1, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, }; struct vcores_data omap4430_volts_es1 = { diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c index 7225a301b1..7e71ca0a26 100644 --- a/arch/arm/cpu/armv7/omap4/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -301,6 +301,8 @@ struct omap_sys_ctrl_regs const omap4_ctrl = { .control_ldosram_iva_voltage_ctrl = 0x4A002320, .control_ldosram_mpu_voltage_ctrl = 0x4A002324, .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_usbotghs_ctrl = 0x4A00233C, + .control_padconf_core_base = 0x4A100000, .control_pbiaslite = 0x4A100600, .control_lpddr2io1_0 = 0x4A100638, .control_lpddr2io1_1 = 0x4A10063C, @@ -312,4 +314,5 @@ struct omap_sys_ctrl_regs const omap4_ctrl = { .control_lpddr2io2_3 = 0x4A100654, .control_efuse_1 = 0x4A100700, .control_efuse_2 = 0x4A100704, + .control_padconf_wkup_base = 0x4A31E000, }; diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index ce00e2c3c5..6ff8dbb4eb 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -30,6 +30,7 @@ COBJS += emif.o COBJS += sdram.o COBJS += prcm-regs.o COBJS += hw_data.o +COBJS += abb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c new file mode 100644 index 0000000000..92470becc0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/abb.c @@ -0,0 +1,67 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP5 family + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/omap_common.h> +#include <asm/io.h> + +/* + * Setup LDOVBB for OMAP5. + * On OMAP5+ some ABB settings are fused. They are handled + * in the following way: + * + * 1. corresponding EFUSE register contains ABB enable bit + * and VSET value + * 2. If ABB enable bit is set to 1, than ABB should be + * enabled, otherwise ABB should be disabled + * 3. If ABB is enabled, than VSET value should be copied + * to corresponding MUX control register + */ +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + u32 vset; + + /* + * ABB parameters must be properly fused + * otherwise ABB should be disabled + */ + vset = readl(fuse); + if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK)) + return -1; + + /* prepare VSET value for LDOVBB mux register */ + vset &= OMAP5_ABB_FUSE_VSET_MASK; + vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1; + vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; + vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; + + /* setup LDOVBB using fused value */ + clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset); + + return 0; +} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 604fa42b1b..56cf1f8c60 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -26,10 +26,11 @@ * MA 02111-1307 USA */ #include <common.h> +#include <palmas.h> #include <asm/arch/omap.h> #include <asm/arch/sys_proto.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_gpio.h> #include <asm/io.h> #include <asm/emif.h> @@ -99,14 +100,13 @@ static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { }; static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { - {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ + {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ }; static const struct dpll_params @@ -132,15 +132,14 @@ static const struct dpll_params }; static const struct dpll_params - core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = { - {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */ - {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */ - {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */ + core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */ + {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */ + {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */ + {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */ + {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */ - {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */ + {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */ }; static const struct dpll_params @@ -186,14 +185,13 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { }; static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { - {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ + {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ - {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */ + {10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ }; static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { @@ -206,6 +204,16 @@ static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ }; +static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = { + {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + /* ABE M & N values with sys_clk as source */ static const struct dpll_params abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { @@ -223,26 +231,36 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = { 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 }; +/* ABE M & N values with sysclk2(22.5792 MHz) as input */ +static const struct dpll_params + abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = { + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ +}; + static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ }; -static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = { - {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ +static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { + {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ + {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ - {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ + {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ }; struct dplls omap5_dplls_es1 = { @@ -275,10 +293,12 @@ struct dplls omap5_dplls_es2 = { struct dplls dra7xx_dplls = { .mpu = mpu_dpll_params_1ghz, - .core = core_dpll_params_2128mhz_ddr532_dra7xx, + .core = core_dpll_params_2128mhz_dra7xx, .per = per_dpll_params_768mhz_dra7xx, + .abe = abe_dpll_params_sysclk2_361267khz, + .iva = iva_dpll_params_2330mhz_dra7xx, .usb = usb_dpll_params_1920mhz, - .ddr = ddr_dpll_params_1066mhz, + .ddr = ddr_dpll_params_2128mhz, }; struct pmic_data palmas = { @@ -289,6 +309,22 @@ struct pmic_data palmas = { * Offset code 0 switches OFF the SMPS */ .start_code = 6, + .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, + .pmic_bus_init = sri2c_init, + .pmic_write = omap_vc_bypass_send_value, +}; + +struct pmic_data tps659038 = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, + .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR, + .pmic_bus_init = gpi2c_init, + .pmic_write = palmas_i2c_write_u8, }; struct vcores_data omap5430_volts = { @@ -319,6 +355,38 @@ struct vcores_data omap5430_volts_es2 = { .mm.pmic = &palmas, }; +struct vcores_data dra752_volts = { + .mpu.value = VDD_MPU_DRA752, + .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU, + .mpu.pmic = &tps659038, + + .eve.value = VDD_EVE_DRA752, + .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE, + .eve.pmic = &tps659038, + + .gpu.value = VDD_GPU_DRA752, + .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU, + .gpu.pmic = &tps659038, + + .core.value = VDD_CORE_DRA752, + .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS659038_REG_ADDR_SMPS7_CORE, + .core.pmic = &tps659038, + + .iva.value = VDD_IVA_DRA752, + .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA, + .iva.pmic = &tps659038, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -383,12 +451,6 @@ void enable_basic_clocks(void) clk_modules_explicit_en_essential, 1); - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - /* Enable SCRM OPT clocks for PER and CORE dpll */ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, OPTFCLKEN_SCRM_PER_MASK); @@ -540,6 +602,17 @@ const struct ctrl_ioregs ioregs_omap5432_es2 = { .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, }; +const struct ctrl_ioregs ioregs_dra7xx_es1 = { + .ctrl_ddrch = 0x40404040, + .ctrl_lpddr2ch = 0x40404040, + .ctrl_ddr3ch = 0x80808080, + .ctrl_ddrio_0 = 0xbae8c631, + .ctrl_ddrio_1 = 0xb46318d8, + .ctrl_ddrio_2 = 0x84210000, + .ctrl_emif_sdram_config_ext = 0xb2c00000, + .ctrl_ddr_ctrl_ext_0 = 0xA2000000, +}; + void hw_data_init(void) { u32 omap_rev = omap_revision(); @@ -565,7 +638,7 @@ void hw_data_init(void) case DRA752_ES1_0: *prcm = &dra7xx_prcm; *dplls_data = &dra7xx_dplls; - *omap_vcores = &omap5430_volts_es2; + *omap_vcores = &dra752_volts; *ctrl = &dra7xx_ctrl; break; @@ -582,14 +655,16 @@ void get_ioregs(const struct ctrl_ioregs **regs) case OMAP5430_ES1_0: case OMAP5430_ES2_0: *regs = &ioregs_omap5430; - break; + break; case OMAP5432_ES1_0: *regs = &ioregs_omap5432_es1; - break; + break; case OMAP5432_ES2_0: - case DRA752_ES1_0: *regs = &ioregs_omap5432_es2; - break; + break; + case DRA752_ES1_0: + *regs = &ioregs_dra7xx_es1; + break; default: printf("\n INVALID OMAP REVISION "); diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index e192fea0eb..daf124e99c 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -32,7 +32,7 @@ #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/sizes.h> #include <asm/utils.h> #include <asm/arch/gpio.h> @@ -100,16 +100,21 @@ static void io_settings_ddr3(void) writel(ioregs->ctrl_emif_sdram_config_ext, (*ctrl)->control_emif2_sdram_config_ext); - /* Disable DLL select */ - io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) + if (is_omap54xx()) { + /* Disable DLL select */ + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif1_sdram_config); + writel(io_settings, + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); - writel(io_settings, - (*ctrl)->control_port_emif2_sdram_config); + writel(io_settings, + (*ctrl)->control_port_emif2_sdram_config); + } else { + writel(ioregs->ctrl_ddr_ctrl_ext_0, + (*ctrl)->control_ddr_control_ext_0); + } } /* @@ -201,6 +206,9 @@ void srcomp_enable(void) u32 sysclk_ind = get_sys_clk_index(); u32 omap_rev = omap_revision(); + if (!is_omap54xx()) + return; + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; div_factor = srcomp_parameters[sysclk_ind].divide_factor; diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index e9f6a32653..e839ff5fe5 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -298,6 +298,7 @@ struct prcm_regs const omap5_es1_prcm = { .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, .prm_rstctrl = 0x4ae07b00, .prm_rstst = 0x4ae07b04, + .prm_rsttime = 0x4ae07b08, .prm_vc_val_bypass = 0x4ae07ba0, .prm_vc_cfg_i2c_mode = 0x4ae07bb4, .prm_vc_cfg_i2c_clk = 0x4ae07bb8, @@ -307,10 +308,16 @@ struct prcm_regs const omap5_es1_prcm = { .prm_sldo_mpu_ctrl = 0x4ae07bd0, .prm_sldo_mm_setup = 0x4ae07bd4, .prm_sldo_mm_ctrl = 0x4ae07bd8, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, }; struct omap_sys_ctrl_regs const omap5_ctrl = { .control_status = 0x4A002134, + .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4, + .control_padconf_core_base = 0x4A002800, .control_paconf_global = 0x4A002DA0, .control_paconf_mode = 0x4A002DA4, .control_smart1io_padconf_0 = 0x4A002DA8, @@ -358,6 +365,8 @@ struct omap_sys_ctrl_regs const omap5_ctrl = { .control_port_emif2_sdram_config = 0x4AE0C118, .control_emif1_sdram_config_ext = 0x4AE0C144, .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318, + .control_padconf_wkup_base = 0x4AE0C800, .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, .control_padconf_mode = 0x4AE0CDA8, @@ -434,6 +443,7 @@ struct omap_sys_ctrl_regs const dra7xx_ctrl = { .control_srcomp_east_side = 0x4A002E7C, .control_srcomp_west_side = 0x4A002E80, .control_srcomp_code_latch = 0x4A002E84, + .control_ddr_control_ext_0 = 0x4A002E88, .control_padconf_core_base = 0x4A003400, .control_port_emif1_sdram_config = 0x4AE0C110, .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, @@ -709,6 +719,9 @@ struct prcm_regs const omap5_es2_prcm = { .cm_l3init_fsusb_clkctrl = 0x4a0096d0, .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + /* prm irqstatus regs */ + .prm_irqstatus_mpu_2 = 0x4ae06014, + /* l4 wkup regs */ .cm_abe_pll_ref_clksel = 0x4ae0610c, .cm_sys_clksel = 0x4ae06110, @@ -740,6 +753,12 @@ struct prcm_regs const omap5_es2_prcm = { .prm_sldo_mpu_ctrl = 0x4ae07cd0, .prm_sldo_mm_setup = 0x4ae07cd4, .prm_sldo_mm_ctrl = 0x4ae07cd8, + .prm_abbldo_mpu_setup = 0x4ae07cdc, + .prm_abbldo_mpu_ctrl = 0x4ae07ce0, + + /* SCRM stuff, used by some boards */ + .scrm_auxclk0 = 0x4ae0a310, + .scrm_auxclk1 = 0x4ae0a314, }; struct prcm_regs const dra7xx_prcm = { @@ -941,6 +960,7 @@ struct prcm_regs const dra7xx_prcm = { /* l4 wkup regs */ .cm_abe_pll_ref_clksel = 0x4ae0610c, .cm_sys_clksel = 0x4ae06110, + .cm_abe_pll_sys_clksel = 0x4ae06118, .cm_wkup_clkstctrl = 0x4ae07800, .cm_wkup_l4wkup_clkctrl = 0x4ae07820, .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 6b461e4846..1b445a61eb 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -108,6 +108,7 @@ const struct emif_regs emif_regs_266_mhz_2cs = { const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, .ref_ctrl = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, @@ -131,6 +132,7 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { .sdram_config_init = 0x61851B32, .sdram_config = 0x61851B32, + .sdram_config2 = 0x0, .ref_ctrl = 0x00001035, .sdram_tim1 = 0xCCCF36B3, .sdram_tim2 = 0x308F7FDA, @@ -151,6 +153,54 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { .emif_rd_wr_exec_thresh = 0x40000305 }; +const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851ab2, + .sdram_config = 0x61851ab2, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0E20400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_3 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_4 = 0x009E009E, + .emif_ddr_ext_phy_ctrl_5 = 0x009E009E, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .sdram_config2 = 0x08000000, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x0007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0020400A, + .emif_ddr_phy_ctlr_1 = 0x0E24400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_3 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_4 = 0x009D009D, + .emif_ddr_ext_phy_ctrl_5 = 0x009D009D, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, @@ -159,11 +209,39 @@ const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .is_ma_present = 0x1 }; -const struct dmm_lisa_map_regs lisa_map_512M_x_1 = { +/* + * DRA752 EVM board has 1.5 GB of memory + * EMIF1 --> 2Gb * 2 = 512MB + * EMIF2 --> 2Gb * 4 = 1GB + * so mapping 1GB interleaved and 512MB non-interleaved + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x80640300, + .dmm_lisa_map_2 = 0xC0500220, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF1 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, - .dmm_lisa_map_2 = 0x0, - .dmm_lisa_map_3 = 0x80500100, + .dmm_lisa_map_2 = 0x80500100, + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +/* + * DRA752 EVM EMIF2 ONLY CONFIGURATION + */ +const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x80600200, + .dmm_lisa_map_3 = 0xFF020100, .is_ma_present = 0x1 }; @@ -180,9 +258,20 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_532_mhz_2cs_es2; break; case OMAP5432_ES2_0: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + break; case DRA752_ES1_0: + switch (emif_nr) { + case 1: + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; + break; + case 2: + *regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1; + break; + } + break; default: - *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1; } } @@ -201,7 +290,7 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs break; case DRA752_ES1_0: default: - *dmm_lisa_regs = &lisa_map_512M_x_1; + *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2; } } @@ -252,7 +341,8 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000077 + 0x00000077, + 0x0 }; const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { @@ -274,7 +364,8 @@ const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000057 + 0x00000057, + 0x0 }; const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { @@ -296,7 +387,56 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000000, 0x00000000, 0x00000000, - 0x00000057 + 0x00000057, + 0x0 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009E009E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x002E002E, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x004D004D, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 +}; + +const u32 +dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x009D009D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x002D002D, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x00570057, + 0x0, + 0x600020, + 0x40010080, + 0x8102040 }; const struct lpddr2_mr_regs mr_regs = { @@ -307,7 +447,7 @@ const struct lpddr2_mr_regs mr_regs = { .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) +static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs) { switch (omap_revision()) { case OMAP5430_ES1_0: @@ -318,7 +458,14 @@ static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) *regs = ddr3_ext_phy_ctrl_const_base_es1; break; case OMAP5432_ES2_0: + *regs = ddr3_ext_phy_ctrl_const_base_es2; + break; case DRA752_ES1_0: + if (emif_nr == 1) + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1; + else + *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2; + break; default: *regs = ddr3_ext_phy_ctrl_const_base_es2; @@ -334,9 +481,12 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; + u32 emif_nr; const u32 *ext_phy_ctrl_const_regs; u32 i = 0; + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); @@ -353,7 +503,7 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) * external phy 6-24 registers do not change with * ddr frequency */ - emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs); + emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs); for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { writel(ext_phy_ctrl_const_regs[i], emif_ext_phy_ctrl_base++); diff --git a/arch/arm/cpu/armv7/vf610/Makefile b/arch/arm/cpu/armv7/vf610/Makefile new file mode 100644 index 0000000000..9232cd4276 --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/Makefile @@ -0,0 +1,42 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += generic.o +COBJS += timer.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c new file mode 100644 index 0000000000..87f2a8642d --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/generic.c @@ -0,0 +1,324 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <netdev.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif + +#ifdef CONFIG_FSL_ESDHC +DECLARE_GLOBAL_DATA_PTR; +#endif + +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 reg; + + reg = readl(&ccm->ccgr6); + if (enable) + reg |= CCM_CCGR6_OCOTP_CTRL_MASK; + else + reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK; + writel(reg, &ccm->ccgr6); +} +#endif + +static u32 get_mcu_main_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_ccsr, ccm_cacrr, armclk_div; + u32 sysclk_sel, pll_pfd_sel = 0; + u32 freq = 0; + + ccm_ccsr = readl(&ccm->ccsr); + sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK; + sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET; + + ccm_cacrr = readl(&ccm->cacrr); + armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK; + armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET; + armclk_div += 1; + + switch (sysclk_sel) { + case 0: + freq = FASE_CLK_FREQ; + break; + case 1: + freq = SLOW_CLK_FREQ; + break; + case 2: + pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK; + pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET; + if (pll_pfd_sel == 0) + freq = PLL2_MAIN_FREQ; + else if (pll_pfd_sel == 1) + freq = PLL2_PFD1_FREQ; + else if (pll_pfd_sel == 2) + freq = PLL2_PFD2_FREQ; + else if (pll_pfd_sel == 3) + freq = PLL2_PFD3_FREQ; + else if (pll_pfd_sel == 4) + freq = PLL2_PFD4_FREQ; + break; + case 3: + freq = PLL2_MAIN_FREQ; + break; + case 4: + pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK; + pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET; + if (pll_pfd_sel == 0) + freq = PLL1_MAIN_FREQ; + else if (pll_pfd_sel == 1) + freq = PLL1_PFD1_FREQ; + else if (pll_pfd_sel == 2) + freq = PLL1_PFD2_FREQ; + else if (pll_pfd_sel == 3) + freq = PLL1_PFD3_FREQ; + else if (pll_pfd_sel == 4) + freq = PLL1_PFD4_FREQ; + break; + case 5: + freq = PLL3_MAIN_FREQ; + break; + default: + printf("unsupported system clock select\n"); + } + + return freq / armclk_div; +} + +static u32 get_bus_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cacrr, busclk_div; + + ccm_cacrr = readl(&ccm->cacrr); + + busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK; + busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET; + busclk_div += 1; + + return get_mcu_main_clk() / busclk_div; +} + +static u32 get_ipg_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cacrr, ipgclk_div; + + ccm_cacrr = readl(&ccm->cacrr); + + ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK; + ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET; + ipgclk_div += 1; + + return get_bus_clk() / ipgclk_div; +} + +static u32 get_uart_clk(void) +{ + return get_ipg_clk(); +} + +static u32 get_sdhc_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div; + u32 freq = 0; + + ccm_cscmr1 = readl(&ccm->cscmr1); + sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK; + sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET; + + ccm_cscdr2 = readl(&ccm->cscdr2); + sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK; + sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET; + sdhc_clk_div += 1; + + switch (sdhc_clk_sel) { + case 0: + freq = PLL3_MAIN_FREQ; + break; + case 1: + freq = PLL3_PFD3_FREQ; + break; + case 2: + freq = PLL1_PFD3_FREQ; + break; + case 3: + freq = get_bus_clk(); + break; + } + + return freq / sdhc_clk_div; +} + +u32 get_fec_clk(void) +{ + struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR; + u32 ccm_cscmr2, rmii_clk_sel; + u32 freq = 0; + + ccm_cscmr2 = readl(&ccm->cscmr2); + rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK; + rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET; + + switch (rmii_clk_sel) { + case 0: + freq = ENET_EXTERNAL_CLK; + break; + case 1: + freq = AUDIO_EXTERNAL_CLK; + break; + case 2: + freq = PLL5_MAIN_FREQ; + break; + case 3: + freq = PLL5_MAIN_FREQ / 2; + break; + } + + return freq; +} + +unsigned int mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return get_mcu_main_clk(); + case MXC_BUS_CLK: + return get_bus_clk(); + case MXC_IPG_CLK: + return get_ipg_clk(); + case MXC_UART_CLK: + return get_uart_clk(); + case MXC_ESDHC_CLK: + return get_sdhc_clk(); + case MXC_FEC_CLK: + return get_fec_clk(); + default: + break; + } + return -1; +} + +/* Dump some core clocks */ +int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + printf("\n"); + printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000); + printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000); + + return 0; +} + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks, + "display clocks", + "" +); + +#ifdef CONFIG_FEC_MXC +void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) +{ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[4]; + struct fuse_bank4_regs *fuse = + (struct fuse_bank4_regs *)bank->fuse_regs; + + u32 value = readl(&fuse->mac_addr0); + mac[0] = (value >> 8); + mac[1] = value; + + value = readl(&fuse->mac_addr1); + mac[2] = value >> 24; + mac[3] = value >> 16; + mac[4] = value >> 8; + mac[5] = value; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +static char *get_reset_cause(void) +{ + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + cause = readl(&src_regs->srsr); + writel(cause, &src_regs->srsr); + cause &= 0xff; + + switch (cause) { + case 0x08: + return "WDOG"; + case 0x20: + return "JTAG HIGH-Z"; + case 0x80: + return "EXTERNAL RESET"; + case 0xfd: + return "POR"; + default: + return "unknown reset"; + } +} + +int print_cpuinfo(void) +{ + printf("CPU: Freescale Vybrid VF610 at %d MHz\n", + mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("Reset cause: %s\n", get_reset_cause()); + + return 0; +} +#endif + +int cpu_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + +#if defined(CONFIG_FEC_MXC) + rc = fecmxc_initialize(bis); +#endif + + return rc; +} + +#ifdef CONFIG_FSL_ESDHC +int cpu_mmc_init(bd_t *bis) +{ + return fsl_esdhc_mmc_init(bis); +} +#endif + +int get_clocks(void) +{ +#ifdef CONFIG_FSL_ESDHC + gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); +#endif + return 0; +} diff --git a/arch/arm/cpu/armv7/vf610/timer.c b/arch/arm/cpu/armv7/vf610/timer.c new file mode 100644 index 0000000000..f8fbed7864 --- /dev/null +++ b/arch/arm/cpu/armv7/vf610/timer.c @@ -0,0 +1,103 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <div64.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> + +static struct pit_reg *cur_pit = (struct pit_reg *)PIT_BASE_ADDR; + +DECLARE_GLOBAL_DATA_PTR; + +#define TIMER_LOAD_VAL 0xffffffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, mxc_get_clock(MXC_IPG_CLK)); + + return tick; +} + +static inline unsigned long long us_to_tick(unsigned long long usec) +{ + usec = usec * mxc_get_clock(MXC_IPG_CLK) + 999999; + do_div(usec, 1000000); + + return usec; +} + +int timer_init(void) +{ + __raw_writel(0, &cur_pit->mcr); + + __raw_writel(TIMER_LOAD_VAL, &cur_pit->ldval1); + __raw_writel(0, &cur_pit->tctrl1); + __raw_writel(1, &cur_pit->tctrl1); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + + return 0; +} + +unsigned long long get_ticks(void) +{ + ulong now = TIMER_LOAD_VAL - __raw_readl(&cur_pit->cval1); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +ulong get_timer_masked(void) +{ + return tick_to_time(get_ticks()); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +/* delay x useconds AND preserve advance timstamp value */ +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = us_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return mxc_get_clock(MXC_IPG_CLK); +} diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c index 0c186101ec..f07dc67823 100644 --- a/arch/arm/cpu/pxa/pxa2xx.c +++ b/arch/arm/cpu/pxa/pxa2xx.c @@ -244,7 +244,7 @@ void pxa_clock_setup(void) { writel(CONFIG_SYS_CKEN, CKEN); writel(CONFIG_SYS_CCCR, CCCR); - asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(2)); + asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b)); /* enable the 32Khz oscillator for RTC and PowerManager */ writel(OSCC_OON, OSCC); diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c index e099683890..9e6d51dd12 100644 --- a/arch/arm/cpu/tegra-common/ap.c +++ b/arch/arm/cpu/tegra-common/ap.c @@ -109,6 +109,10 @@ static void enable_scu(void) struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; u32 reg; + /* Only enable the SCU on T20/T25 */ + if (tegra_get_chip() != CHIPID_TEGRA20) + return; + /* If SCU already setup/enabled, return */ if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) return; diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 8bba8a57bf..9492326615 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libimx-common.o -ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6)) +ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6 vf610)) COBJS-y = iomux-v3.o endif ifeq ($(SOC),$(filter $(SOC),mx5 mx6)) diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 7fe5ce7ce5..35880c7a7c 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -48,8 +48,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) if (sel_input_ofs) __raw_writel(sel_input, base + sel_input_ofs); +#ifdef CONFIG_IOMUX_SHARE_CONF_REG + if (!(pad_ctrl & NO_PAD_CTRL)) + __raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl, + base + pad_ctrl_ofs); +#else if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) __raw_writel(pad_ctrl, base + pad_ctrl_ofs); +#endif } void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index a851f1f50f..beaf0d601a 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -22,8 +22,14 @@ #define __ASM_ARCH_PINMUX_DEFS_H #include <asm/arch/davinci_misc.h> +#include <config.h> -/* SPI pin muxer settings */ +/* SPI0 pin muxer settings */ +extern const struct pinmux_config spi0_pins_base[3]; +extern const struct pinmux_config spi0_pins_scs0[1]; +extern const struct pinmux_config spi0_pins_ena[1]; + +/* SPI1 pin muxer settings */ extern const struct pinmux_config spi1_pins_base[3]; extern const struct pinmux_config spi1_pins_scs0[1]; @@ -35,6 +41,7 @@ extern const struct pinmux_config uart2_pins_rtscts[2]; /* EMAC pin muxer settings*/ extern const struct pinmux_config emac_pins_rmii[7]; +extern const struct pinmux_config emac_pins_rmii_clk_source[1]; extern const struct pinmux_config emac_pins_mii[15]; extern const struct pinmux_config emac_pins_mdio[2]; @@ -43,13 +50,19 @@ extern const struct pinmux_config i2c0_pins[2]; extern const struct pinmux_config i2c1_pins[2]; /* EMIFA pin muxer settings */ +extern const struct pinmux_config emifa_pins[40]; +extern const struct pinmux_config emifa_pins_cs0[1]; extern const struct pinmux_config emifa_pins_cs2[1]; extern const struct pinmux_config emifa_pins_cs3[1]; extern const struct pinmux_config emifa_pins_cs4[1]; extern const struct pinmux_config emifa_pins_nand[12]; extern const struct pinmux_config emifa_pins_nor[43]; +/* USB pin mux setting */ +extern const struct pinmux_config usb_pins[1]; + /* MMC pin muxer settings */ +extern const struct pinmux_config mmc0_pins_8bit[10]; extern const struct pinmux_config mmc0_pins[6]; #endif diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h deleted file mode 100644 index 8522335bfc..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/bits.h +++ /dev/null @@ -1,48 +0,0 @@ -/* bits.h - * Copyright (c) 2004 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 (1<<0) -#define BIT1 (1<<1) -#define BIT2 (1<<2) -#define BIT3 (1<<3) -#define BIT4 (1<<4) -#define BIT5 (1<<5) -#define BIT6 (1<<6) -#define BIT7 (1<<7) -#define BIT8 (1<<8) -#define BIT9 (1<<9) -#define BIT10 (1<<10) -#define BIT11 (1<<11) -#define BIT12 (1<<12) -#define BIT13 (1<<13) -#define BIT14 (1<<14) -#define BIT15 (1<<15) -#define BIT16 (1<<16) -#define BIT17 (1<<17) -#define BIT18 (1<<18) -#define BIT19 (1<<19) -#define BIT20 (1<<20) -#define BIT21 (1<<21) -#define BIT22 (1<<22) -#define BIT23 (1<<23) -#define BIT24 (1<<24) -#define BIT25 (1<<25) -#define BIT26 (1<<26) -#define BIT27 (1<<27) -#define BIT28 (1<<28) -#define BIT29 (1<<29) -#define BIT30 (1<<30) -#define BIT31 (1<<31) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h deleted file mode 100644 index 2e92569a9c..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/clocks.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_CLOCKS_H_ -#define _OMAP24XX_CLOCKS_H_ - -#define COMMIT_DIVIDERS 0x1 - -#define MODE_BYPASS_FAST 0x2 -#define APLL_LOCK 0xc -#ifdef CONFIG_APTIX -#define DPLL_LOCK 0x1 /* stay in bypass mode */ -#else -#define DPLL_LOCK 0x3 /* DPLL lock */ -#endif - -/****************************************************************************; -; PRCM Scheme II -; -; Enable clocks and DPLL for: -; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 -; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] -; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] -; DSPI=100 6 CM_CLKSEL_DSP[6:5] -; DSP_S bypass CM_CLKSEL_DSP[7] -; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] -; IVAF=100 auto -; IVAI auto -; IVA_MPU auto -; IVA_S bypass CM_CLKSEL_DSP[13] -; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] -; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=100 auto -; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] -; L4=100Mhz 6 -; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define II_DPLL_OUT_X2 0x2 /* x2 core out */ -#define II_MPU_DIV 0x2 /* mpu = core/2 */ -#define II_DSP_DIV 0x343 /* dsp & iva divider */ -#define II_GFX_DIV 0x2 -#define II_BUS_DIV 0x04601026 -#define II_DPLL_300 0x01832100 - -/****************************************************************************; -; PRCM Scheme III -; -; Enable clocks and DPLL for: -; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 -; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] -; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] -; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] -; DSP_S ACTIVATED CM_CLKSEL_DSP[7] -; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] -; IVAF=88.67 auto -; IVAI auto -; IVA_MPU auto -; IVA_S ACTIVATED CM_CLKSEL_DSP[13] -; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: -; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=88.67 auto -; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] -; L4=66.5Mhz /8 -; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define III_DPLL_OUT_X2 0x2 /* x2 core out */ -#define III_MPU_DIV 0x2 /* mpu = core/2 */ -#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ -#define III_GFX_DIV 0x2 -#define III_BUS_DIV 0x08301044 -#define III_DPLL_266 0x01885500 - -/* set defaults for boot up */ -#ifdef PRCM_CONFIG_II -# define DPLL_OUT II_DPLL_OUT_X2 -# define MPU_DIV II_MPU_DIV -# define DSP_DIV II_DSP_DIV -# define GFX_DIV II_GFX_DIV -# define BUS_DIV II_BUS_DIV -# define DPLL_VAL II_DPLL_300 -#elif PRCM_CONFIG_III -# define DPLL_OUT III_DPLL_OUT_X2 -# define MPU_DIV III_MPU_DIV -# define DSP_DIV III_DSP_DIV -# define GFX_DIV III_GFX_DIV -# define BUS_DIV III_BUS_DIV -# define DPLL_VAL III_DPLL_266 -#endif - -/* lock delay time out */ -#define LDELAY 12000000 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h deleted file mode 100644 index 6f645192a7..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/i2c.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_I2C_H_ -#define _OMAP24XX_I2C_H_ - -#define I2C_BASE1 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ - -#define I2C_DEFAULT_BASE I2C_BASE1 - -struct i2c { - unsigned short rev; /* 0x00 */ - unsigned short res1; - unsigned short ie; /* 0x04 */ - unsigned short res2; - unsigned short stat; /* 0x08 */ - unsigned short res3; - unsigned short iv; /* 0x0C */ - unsigned short res4; - unsigned short syss; /* 0x10 */ - unsigned short res4p1; - unsigned short buf; /* 0x14 */ - unsigned short res5; - unsigned short cnt; /* 0x18 */ - unsigned short res6; - unsigned short data; /* 0x1C */ - unsigned short res7; - unsigned short sysc; /* 0x20 */ - unsigned short res8; - unsigned short con; /* 0x24 */ - unsigned short res9; - unsigned short oa; /* 0x28 */ - unsigned short res10; - unsigned short sa; /* 0x2C */ - unsigned short res11; - unsigned short psc; /* 0x30 */ - unsigned short res12; - unsigned short scll; /* 0x34 */ - unsigned short res13; - unsigned short sclh; /* 0x38 */ - unsigned short res14; - unsigned short systest; /* 0x3c */ - unsigned short res15; -}; - -#define I2C_BUS_MAX 2 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h deleted file mode 100644 index 42e8ab2bce..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/mem.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_MEM_H_ -#define _OMAP24XX_MEM_H_ - -#define SDRC_CS0_OSET 0x0 -#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ - -#ifndef __ASSEMBLY__ -/* struct's for holding data tables for current boards, they are getting used - early in init when NO global access are there */ -struct sdrc_data_s { - u32 sdrc_sharing; - u32 sdrc_mdcfg_0_ddr; - u32 sdrc_mdcfg_0_sdr; - u32 sdrc_actim_ctrla_0; - u32 sdrc_actim_ctrlb_0; - u32 sdrc_rfr_ctrl; - u32 sdrc_mr_0_ddr; - u32 sdrc_mr_0_sdr; - u32 sdrc_dllab_ctrl; -} /*__attribute__ ((packed))*/; -typedef struct sdrc_data_s sdrc_data_t; - -typedef enum { - STACKED = 0, - IP_DDR = 1, - COMBO_DDR = 2, - IP_SDR = 3, -} mem_t; - -#endif - -/* Slower full frequency range default timings for x32 operation*/ -#define H4_2420_SDRC_SHARING 0x00000100 -#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ -#define H4_2420_SDRC_MR_0_SDR 0x00000031 -#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ -#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ -#define H4_2420_SDRC_MR_0_DDR 0x00000032 - -#define H4_2422_SDRC_SHARING 0x00004b00 -#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ -#define H4_2422_SDRC_MR_0_DDR 0x00000032 - -/* ES1 work around timings */ -#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ -#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 -#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ - -/* optimized timings good for current shipping parts */ -#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 -#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e -#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ -#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ -#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 -#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 -#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ -#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ - -#ifdef PRCM_CONFIG_II -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#elif PRCM_CONFIG_III -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#endif - - -/* GPMC settings */ -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* else NOR */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 -# define H4_24XX_GPMC_CONFIG3_0 0x00050502 -# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 -# define H4_24XX_GPMC_CONFIG3_1 0x00080802 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x00151501 -# define H4_24XX_GPMC_CONFIG3_0 0x00060602 -# define H4_24XX_GPMC_CONFIG4_0 0x10081008 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define H4_24XX_GPMC_CONFIG3_1 0x00080803 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif CONFIG_SYS_PRCM_III */ - -#endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h deleted file mode 100644 index 4fdb9c635f..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/mux.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP2420_MUX_H_ -#define _OMAP2420_MUX_H_ - -#ifndef __ASSEMBLY__ -typedef unsigned char uint8; -typedef unsigned int uint32; - -void muxSetupSDRC(void); -void muxSetupGPMC(void); -void muxSetupUsb0(void); -void muxSetupUsbHost(void); -void muxSetupUart3(void); -void muxSetupI2C1(void); -void muxSetupUART1(void); -void muxSetupLCD(void); -void muxSetupCamera(void); -void muxSetupMMCSD(void) ; -void muxSetupTouchScreen(void) ; -void muxSetupHDQ(void); -#endif - -#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C) - -/* Pin Muxing registers used for HDQ (Smart battery) */ -#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115) - -/* Pin Muxing registers used for GPMC */ -#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088) -#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089) -#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A) -#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B) - -#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) -#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093) - -/* Pin Muxing registers used for SDRC */ -#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) -#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3) - -#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031) -#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032) -#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033) - -/* Pin Muxing registers used for Touch Screen (SPI) */ -#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF) -#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) -#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) -#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) -#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103) - -#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B) - -/* Pin Muxing registers used for MMCSD */ -#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE) -#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3) -#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4) -#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5) -#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6) -#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7) -#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8) -#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9) -#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA) -#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB) -#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC) -#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD) - -#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030) -#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031) - -/* Pin Muxing registers used for CAMERA */ -#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B) - -#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC) -#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB) -#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA) -#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9) -#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8) -#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7) -#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6) -#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5) -#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4) -#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3) -#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2) -#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1) -#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0) -#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF) - -/* Pin Muxing registers used for LCD */ -#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3) -#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4) -#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5) -#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6) -#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7) -#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8) -#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9) -#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA) -#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB) -#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC) -#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD) -#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE) -#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF) -#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0) -#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1) -#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2) -#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3) -#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4) -#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB) -#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC) -#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD) -#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE) - -/* Pin Muxing registers used for UART1 */ -#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) -#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) -#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) -#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) - -/* Pin Muxing registers used for I2C1 */ -#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111) -#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112) - -/* Pin Muxing registres used for USB0. */ -#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D) -#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E) -#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F) -#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120) -#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121) -#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) -#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123) - -/* Pin Muxing registres used for USB1. */ -#define CONTROL_PADCONF_USB1_RCV (0x480000EB) -#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) - -/* Pin Muxing registers used for UART3/IRDA */ -#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) -#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119) - -/* Pin Muxing registers used for GPIO */ -#define CONTROL_PADCONF_GPIO69 (0x480000ED) -#define CONTROL_PADCONF_GPIO70 (0x480000EE) -#define CONTROL_PADCONF_GPIO102 (0x48000116) -#define CONTROL_PADCONF_GPIO103 (0x48000117) -#define CONTROL_PADCONF_GPIO104 (0x48000118) -#define CONTROL_PADCONF_GPIO105 (0x48000119) - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h deleted file mode 100644 index 5724f5d4ba..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/omap2420.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP2420_SYS_H_ -#define _OMAP2420_SYS_H_ - -#include <asm/sizes.h> - -/* - * 2420 specific Section - */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 - -/* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* device type */ -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 - -/* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) - -/* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) -#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) -#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) -#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) -#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) -#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) -#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) -#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) -#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) -#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) -#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) -#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) -#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) -#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) -#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) - -/* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31 - -/* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - - -/* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 - -/* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ - -/* WatchDog Timers (1 secure, 3 GP) */ -#define WD1_BASE 0x48020000 -#define WD2_BASE 0x48022000 -#define WD3_BASE 0x48024000 -#define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 - -/* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) - -/* - * H4 specific Section - */ - -/* - * The 2420's chip selects are programmable. The mask ROM - * does configure CS0 to 0x08000000 before dispatch. So, if - * you want your code to live below that address, you have to - * be prepared to jump though hoops, to reset the base address. - */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0C000000 /* wifi board */ -#endif - -/* base address for indirect vectors (internal boot mode) */ -#define SRAM_OFFSET0 0x40000000 -#define SRAM_OFFSET1 0x00200000 -#define SRAM_OFFSET2 0x0000F800 -#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) - -/* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) -#endif /* endif CONFIG_2420H4 */ - -/* Common */ -#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h deleted file mode 100644 index 53c231a5e4..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_info.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _OMAP24XX_SYS_INFO_H_ -#define _OMAP24XX_SYS_INFO_H_ - -typedef struct h4_system_data { - /* base board info */ - u32 base_b_rev; /* rev from base board i2c */ - /* cpu board info */ - u32 cpu_b_rev; /* rev from cpu board i2c */ - u32 cpu_b_mux; /* mux type on daughter board */ - u32 cpu_b_ddr_type; /* mem type */ - u32 cpu_b_ddr_speed; /* ddr speed rating */ - u32 cpu_b_switches; /* boot ctrl switch settings */ - /* cpu info */ - u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ - u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ -} h4_sys_data; - -#define XDR_POP 5 /* package on package part */ -#define SDR_DISCRETE 4 /* 128M memory SDR module*/ -#define DDR_STACKED 3 /* stacked part on 2422 */ -#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ -#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ - -#define DDR_100 100 /* type found on most mem d-boards */ -#define DDR_111 111 /* some combo parts */ -#define DDR_133 133 /* most combo, some mem d-boards */ -#define DDR_165 165 /* future parts */ - -#define CPU_2420 0x2420 -#define CPU_2422 0x2422 /* 2420 + 64M stacked */ -#define CPU_2423 0x2423 /* 2420 + 96M stacked */ - -#define CPU_2422_ES1 1 -#define CPU_2422_ES2 2 -#define CPU_2420_ES1 1 -#define CPU_2420_ES2 2 -#define CPU_2420_2422_ES1 1 - -#define CPU_2420_CHIPID 0x0B5D9000 -#define CPU_24XX_ID_MASK 0x0FFFF000 -#define CPU_242X_REV_MASK 0xF0000000 -#define CPU_242X_PID_MASK 0x000F0000 - -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 - -#define GPMC_MUXED 1 -#define GPMC_NONMUXED 0 - -#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ -#define TYPE_NOR 0x000 - -#define WIDTH_8BIT 0x0000 -#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ - -#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ - -#endif diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h deleted file mode 100644 index 9d8e5b2622..0000000000 --- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _OMAP24XX_SYS_PROTO_H_ -#define _OMAP24XX_SYS_PROTO_H_ - -void prcm_init(void); -void memif_init(void); -void sdrc_init(void); -void do_sdrc_init(u32,u32); -void gpmc_init(void); - -void ether_init(void); -void watchdog_init(void); -void set_muxconf_regs(void); -void peripheral_enable(void); - -u32 get_cpu_type(void); -u32 get_cpu_rev(void); -u32 get_mem_type(void); -u32 get_sysboot_value(void); -u32 get_gpmc0_base(void); -u32 is_gpmc_muxed(void); -u32 get_gpmc0_type(void); -u32 get_gpmc0_width(void); -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); -u32 get_board_type(void); -void display_board_info(u32); -void update_mux(u32,u32); -u32 get_sdr_cs_size(u32 offset); - -u32 running_in_sdram(void); -u32 running_in_sram(void); -u32 running_in_flash(void); -u32 running_from_internal_boot(void); -u32 get_device_type(void); -#endif diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h index bed0002ec0..bed0002ec0 100644 --- a/arch/arm/include/asm/arch-omap3/clocks.h +++ b/arch/arm/include/asm/arch-omap3/clock.h diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 2b5e9aeae1..c57599a938 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -253,4 +253,11 @@ struct gpio { #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + #endif diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h index ed7a1c8be7..d14d8fb8af 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -34,25 +34,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE 0x4A004120 -#define CM_CLKMODE_DPLL_PER 0x4A008140 -#define CM_CLKMODE_DPLL_MPU 0x4A004160 -#define CM_CLKSEL_CORE 0x4A004100 - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC -#define CM_DIV_M2_DPLL 0x10 -#define CM_DIV_M3_DPLL 0x14 -#define CM_DIV_M4_DPLL 0x18 -#define CM_DIV_M5_DPLL 0x1C -#define CM_DIV_M6_DPLL 0x20 -#define CM_DIV_M7_DPLL 0x24 - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -94,10 +75,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -181,9 +160,7 @@ #define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -234,14 +211,13 @@ #define ALTCLKSRC_MODE_ACTIVE 1 -/* Defines for DPLL setup */ -#define DPLL_LOCKED_FREQ_TOLERANCE_0 0 -#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500 -#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000 - #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 +/* Clock Defines */ +#define V_OSCK 38400000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + struct omap4_scrm_regs { u32 revision; /* 0x0000 */ u32 pad00[63]; diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index 3a0bfbf0c6..311c6ff522 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -115,18 +115,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 44353a43f2..9fd00ff2aa 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -47,14 +47,6 @@ #define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) -#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) - -/* LPDDR2 IO regs */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - /* CONTROL_ID_CODE */ #define CONTROL_ID_CODE 0x4A002204 @@ -79,15 +71,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP44XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -144,4 +130,12 @@ struct s32ktimer { #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + #endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index ef85594bd2..e413466148 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -22,7 +22,7 @@ #define _SYS_PROTO_H_ #include <asm/arch/omap.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/io.h> #include <asm/omap_common.h> #include <asm/arch/mux_omap4.h> @@ -57,7 +57,8 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h index 68afa76696..4d2765d878 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -35,19 +35,6 @@ */ #define LDELAY 1000000 -#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120) -#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140) -#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) -#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) - -/* DPLL register offsets */ -#define CM_CLKMODE_DPLL 0 -#define CM_IDLEST_DPLL 0x4 -#define CM_AUTOIDLE_DPLL 0x8 -#define CM_CLKSEL_DPLL 0xC - -#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */ - /* CM_DLL_CTRL */ #define CM_DLL_CTRL_OVERRIDE_SHIFT 0 #define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0) @@ -93,10 +80,8 @@ #define CM_CLKSEL_DCC_EN_SHIFT 22 #define CM_CLKSEL_DCC_EN_MASK (1 << 22) -#define OMAP4_DPLL_MAX_N 127 - /* CM_SYS_CLKSEL */ -#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 +#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7 /* CM_CLKSEL_CORE */ #define CLKSEL_CORE_SHIFT 0 @@ -113,6 +98,12 @@ #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0 #define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1 +/* CM_CLKSEL_ABE_PLL_SYS */ +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT 0 +#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK 1 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1 0 +#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2 1 + /* CM_BYPCLK_DPLL_IVA */ #define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0 #define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3 @@ -195,9 +186,7 @@ #define RSTTIME1_MASK (0x3ff << 0) /* Clock frequencies */ -#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 -#define OMAP_32K_CLK_FREQ 32768 /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 @@ -229,9 +218,54 @@ #define VDD_MPU_ES2_LOW 880 #define VDD_MM_ES2_LOW 880 +/* TPS659038 Voltage settings in mv for OPP_NOMINAL */ +#define VDD_MPU_DRA752 1090 +#define VDD_EVE_DRA752 1060 +#define VDD_GPU_DRA752 1060 +#define VDD_CORE_DRA752 1030 +#define VDD_IVA_DRA752 1060 + +/* Efuse register offsets for DRA7xx platform */ +#define DRA752_EFUSE_BASE 0x4A002000 +#define DRA752_EFUSE_REGBITS 16 +/* STD_FUSE_OPP_VMIN_IVA_2 */ +#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC) +/* STD_FUSE_OPP_VMIN_IVA_3 */ +#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0) +/* STD_FUSE_OPP_VMIN_IVA_4 */ +#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4) +/* STD_FUSE_OPP_VMIN_DSPEVE_2 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0) +/* STD_FUSE_OPP_VMIN_DSPEVE_3 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4) +/* STD_FUSE_OPP_VMIN_DSPEVE_4 */ +#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8) +/* STD_FUSE_OPP_VMIN_CORE_2 */ +#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4) +/* STD_FUSE_OPP_VMIN_GPU_2 */ +#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08) +/* STD_FUSE_OPP_VMIN_GPU_3 */ +#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C) +/* STD_FUSE_OPP_VMIN_GPU_4 */ +#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10) +/* STD_FUSE_OPP_VMIN_MPU_2 */ +#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20) +/* STD_FUSE_OPP_VMIN_MPU_3 */ +#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24) +/* STD_FUSE_OPP_VMIN_MPU_4 */ +#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28) + /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 +/* TPS659038 */ +#define TPS659038_I2C_SLAVE_ADDR 0x58 +#define TPS659038_REG_ADDR_SMPS12_MPU 0x23 +#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B +#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F +#define TPS659038_REG_ADDR_SMPS7_CORE 0x33 +#define TPS659038_REG_ADDR_SMPS8_IVA 0x37 + /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 #define TPS62361_REG_ADDR_SET0 0x0 @@ -261,4 +295,25 @@ * into microsec and passing the value. */ #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 + +#ifdef CONFIG_DRA7XX +#define V_OSCK 20000000 /* Clock output from T2 */ +#else +#define V_OSCK 19200000 /* Clock output from T2 */ +#endif + +#define V_SCLK V_OSCK + +/* AUXCLKx reg fields */ +#define AUXCLK_ENABLE_MASK (1 << 8) +#define AUXCLK_SRCSELECT_SHIFT 1 +#define AUXCLK_SRCSELECT_MASK (3 << 1) +#define AUXCLK_CLKDIV_SHIFT 16 +#define AUXCLK_CLKDIV_MASK (0xF << 16) + +#define AUXCLK_SRCSELECT_SYS_CLK 0 +#define AUXCLK_SRCSELECT_CORE_DPLL 1 +#define AUXCLK_SRCSELECT_PER_DPLL 2 +#define AUXCLK_SRCSELECT_ALTERNATE 3 + #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 044ab5581a..4753f4624e 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -119,18 +119,6 @@ struct watchdog { #define WD_UNLOCK1 0xAAAA #define WD_UNLOCK2 0x5555 -#define SYSCLKDIV_1 (0x1 << 6) -#define SYSCLKDIV_2 (0x1 << 7) - -#define CLKSEL_GPT1 (0x1 << 0) - -#define EN_GPT1 (0x1 << 0) -#define EN_32KSYNC (0x1 << 2) - -#define ST_WDT2 (0x1 << 5) - -#define RESETDONE (0x1 << 0) - #define TCLR_ST (0x1 << 0) #define TCLR_AR (0x1 << 1) #define TCLR_PRE (0x1 << 5) diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h index 55e9de6041..5f2b0f9f5d 100644 --- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -28,11 +28,14 @@ #include <asm/types.h> +#define FSC (1 << 19) +#define SSC (0 << 19) + #define IEN (1 << 18) #define IDIS (0 << 18) -#define PTU (3 << 16) -#define PTD (1 << 16) +#define PTU (1 << 17) +#define PTD (0 << 17) #define PEN (1 << 16) #define PDIS (0 << 16) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 04af227e02..5e6d82e51f 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -44,16 +44,15 @@ #define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START #define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END -/* CONTROL */ -#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800) -#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800) - -/* LPDDR2 IO regs. To be verified */ -#define LPDDR2_IO_REGS_BASE 0x4A100638 - -/* CONTROL_ID_CODE */ -#define CONTROL_ID_CODE (CTRL_BASE + 0x204) +/* CONTROL ID CODE */ +#define CONTROL_CORE_ID_CODE 0x4A002204 +#define CONTROL_WKUP_ID_CODE 0x4AE0C204 + +#ifdef CONFIG_DRA7XX +#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE +#else +#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE +#endif /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F @@ -62,11 +61,6 @@ #define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F #define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F -/* STD_FUSE_PROD_ID_1 */ -#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) -#define PROD_ID_1_SILICON_TYPE_SHIFT 16 -#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16) - /* UART */ #define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) #define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) @@ -80,15 +74,9 @@ /* Watchdog Timer2 - MPU watchdog */ #define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000) -/* 32KTIMER */ -#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000) - /* GPMC */ #define OMAP54XX_GPMC_BASE 0x50000000 -/* SYSTEM CONTROL MODULE */ -#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000 - /* * Hardware Register Details */ @@ -118,9 +106,9 @@ /* CONTROL_EFUSE_2 */ #define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000 +#define SDCARD_BIAS_PWRDNZ (1 << 27) #define SDCARD_PWRDNZ (1 << 26) #define SDCARD_BIAS_HIZ_MODE (1 << 25) -#define SDCARD_BIAS_PWRDNZ (1 << 22) #define SDCARD_PBIASLITE_VMODE (1 << 21) #ifndef __ASSEMBLY__ @@ -181,27 +169,18 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ -/* - * Non-secure SRAM Addresses - * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE - * at 0x40304000(EMU base) so that our code works for both EMU and GP - */ +#ifdef CONFIG_DRA7XX +#define NON_SECURE_SRAM_START 0x40300000 +#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ +#else #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ +#endif #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START + /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -/* Silicon revisions */ -#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF -#define OMAP4430_ES1_0 0x44300100 -#define OMAP4430_ES2_0 0x44300200 -#define OMAP4430_ES2_1 0x44300210 -#define OMAP4430_ES2_2 0x44300220 -#define OMAP4430_ES2_3 0x44300230 -#define OMAP4460_ES1_0 0x44600100 -#define OMAP4460_ES1_1 0x44600110 - /* CONTROL_SRCOMP_XXX_SIDE */ #define OVERRIDE_XS_SHIFT 30 #define OVERRIDE_XS_MASK (1 << 30) @@ -216,6 +195,19 @@ struct s32ktimer { #define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 #define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + +/* ABB efuse masks */ +#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) +#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) +#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) + #ifndef __ASSEMBLY__ struct srcomp_params { s8 divide_factor; @@ -230,6 +222,7 @@ struct ctrl_ioregs { u32 ctrl_ddrio_1; u32 ctrl_ddrio_2; u32 ctrl_emif_sdram_config_ext; + u32 ctrl_ddr_ctrl_ext_0; }; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 4d99db9b7d..0bb59d869b 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -23,9 +23,9 @@ #include <asm/arch/omap.h> #include <asm/io.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> #include <asm/omap_common.h> -#include <asm/arch/clocks.h> +#include <asm/arch/clock.h> DECLARE_GLOBAL_DATA_PTR; @@ -61,7 +61,8 @@ u32 cortex_rev(void); void save_omap_boot_params(void); void init_omap_revision(void); void do_io_settings(void); -void omap_vc_init(u16 speed_khz); +void sri2c_init(void); +void gpi2c_init(void); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); diff --git a/arch/arm/include/asm/arch-vf610/clock.h b/arch/arm/include/asm/arch-vf610/clock.h new file mode 100644 index 0000000000..04e418cf84 --- /dev/null +++ b/arch/arm/include/asm/arch-vf610/clock.h @@ -0,0 +1,39 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H + +#include <common.h> + +enum mxc_clock { + MXC_ARM_CLK = 0, + MXC_BUS_CLK, + MXC_IPG_CLK, + MXC_UART_CLK, + MXC_ESDHC_CLK, + MXC_FEC_CLK, +}; + +void enable_ocotp_clk(unsigned char enable); +unsigned int mxc_get_clock(enum mxc_clock clk); + +#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK) + +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h new file mode 100644 index 0000000000..e3f703dc83 --- /dev/null +++ b/arch/arm/include/asm/arch-vf610/crm_regs.h @@ -0,0 +1,225 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARCH_ARM_MACH_VF610_CCM_REGS_H__ +#define __ARCH_ARM_MACH_VF610_CCM_REGS_H__ + +#ifndef __ASSEMBLY__ + +/* Clock Controller Module (CCM) */ +struct ccm_reg { + u32 ccr; + u32 csr; + u32 ccsr; + u32 cacrr; + u32 cscmr1; + u32 cscdr1; + u32 cscdr2; + u32 cscdr3; + u32 cscmr2; + u32 cscdr4; + u32 ctor; + u32 clpcr; + u32 cisr; + u32 cimr; + u32 ccosr; + u32 cgpr; + u32 ccgr0; + u32 ccgr1; + u32 ccgr2; + u32 ccgr3; + u32 ccgr4; + u32 ccgr5; + u32 ccgr6; + u32 ccgr7; + u32 ccgr8; + u32 ccgr9; + u32 ccgr10; + u32 ccgr11; + u32 cmeor0; + u32 cmeor1; + u32 cmeor2; + u32 cmeor3; + u32 cmeor4; + u32 cmeor5; + u32 cppdsr; + u32 ccowr; + u32 ccpgr0; + u32 ccpgr1; + u32 ccpgr2; + u32 ccpgr3; +}; + +/* Analog components control digital interface (ANADIG) */ +struct anadig_reg { + u32 pll3_ctrl; + u32 resv0[3]; + u32 pll7_ctrl; + u32 resv1[3]; + u32 pll2_ctrl; + u32 resv2[3]; + u32 pll2_ss; + u32 resv3[3]; + u32 pll2_num; + u32 resv4[3]; + u32 pll2_denom; + u32 resv5[3]; + u32 pll4_ctrl; + u32 resv6[3]; + u32 pll4_num; + u32 resv7[3]; + u32 pll4_denom; + u32 pll6_ctrl; + u32 resv8[3]; + u32 pll6_num; + u32 resv9[3]; + u32 pll6_denom; + u32 resv10[3]; + u32 pll5_ctrl; + u32 resv11[3]; + u32 pll3_pfd; + u32 resv12[3]; + u32 pll2_pfd; + u32 resv13[3]; + u32 reg_1p1; + u32 resv14[3]; + u32 reg_3p0; + u32 resv15[3]; + u32 reg_2p5; + u32 resv16[7]; + u32 ana_misc0; + u32 resv17[3]; + u32 ana_misc1; + u32 resv18[63]; + u32 anadig_digprog; + u32 resv19[3]; + u32 pll1_ctrl; + u32 resv20[3]; + u32 pll1_ss; + u32 resv21[3]; + u32 pll1_num; + u32 resv22[3]; + u32 pll1_denom; + u32 resv23[3]; + u32 pll1_pdf; + u32 resv24[3]; + u32 pll_lock; +}; +#endif + +#define CCM_CCR_FIRC_EN (1 << 16) +#define CCM_CCR_OSCNT_MASK 0xff +#define CCM_CCR_OSCNT(v) ((v) & 0xff) + +#define CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET 19 +#define CCM_CCSR_PLL2_PFD_CLK_SEL_MASK (0x7 << 19) +#define CCM_CCSR_PLL2_PFD_CLK_SEL(v) (((v) & 0x7) << 19) + +#define CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET 16 +#define CCM_CCSR_PLL1_PFD_CLK_SEL_MASK (0x7 << 16) +#define CCM_CCSR_PLL1_PFD_CLK_SEL(v) (((v) & 0x7) << 16) + +#define CCM_CCSR_PLL2_PFD4_EN (1 << 15) +#define CCM_CCSR_PLL2_PFD3_EN (1 << 14) +#define CCM_CCSR_PLL2_PFD2_EN (1 << 13) +#define CCM_CCSR_PLL2_PFD1_EN (1 << 12) +#define CCM_CCSR_PLL1_PFD4_EN (1 << 11) +#define CCM_CCSR_PLL1_PFD3_EN (1 << 10) +#define CCM_CCSR_PLL1_PFD2_EN (1 << 9) +#define CCM_CCSR_PLL1_PFD1_EN (1 << 8) + +#define CCM_CCSR_DDRC_CLK_SEL(v) ((v) << 6) +#define CCM_CCSR_FAST_CLK_SEL(v) ((v) << 5) + +#define CCM_CCSR_SYS_CLK_SEL_OFFSET 0 +#define CCM_CCSR_SYS_CLK_SEL_MASK 0x7 +#define CCM_CCSR_SYS_CLK_SEL(v) ((v) & 0x7) + +#define CCM_CACRR_IPG_CLK_DIV_OFFSET 11 +#define CCM_CACRR_IPG_CLK_DIV_MASK (0x3 << 11) +#define CCM_CACRR_IPG_CLK_DIV(v) (((v) & 0x3) << 11) +#define CCM_CACRR_BUS_CLK_DIV_OFFSET 3 +#define CCM_CACRR_BUS_CLK_DIV_MASK (0x7 << 3) +#define CCM_CACRR_BUS_CLK_DIV(v) (((v) & 0x7) << 3) +#define CCM_CACRR_ARM_CLK_DIV_OFFSET 0 +#define CCM_CACRR_ARM_CLK_DIV_MASK 0x7 +#define CCM_CACRR_ARM_CLK_DIV(v) ((v) & 0x7) + +#define CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET 18 +#define CCM_CSCMR1_ESDHC1_CLK_SEL_MASK (0x3 << 18) +#define CCM_CSCMR1_ESDHC1_CLK_SEL(v) (((v) & 0x3) << 18) + +#define CCM_CSCDR1_RMII_CLK_EN (1 << 24) + +#define CCM_CSCDR2_ESDHC1_EN (1 << 29) +#define CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET 20 +#define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK (0xf << 20) +#define CCM_CSCDR2_ESDHC1_CLK_DIV(v) (((v) & 0xf) << 20) + +#define CCM_CSCMR2_RMII_CLK_SEL_OFFSET 4 +#define CCM_CSCMR2_RMII_CLK_SEL_MASK (0x3 << 4) +#define CCM_CSCMR2_RMII_CLK_SEL(v) (((v) & 0x3) << 4) + +#define CCM_REG_CTRL_MASK 0xffffffff +#define CCM_CCGR0_UART1_CTRL_MASK (0x3 << 16) +#define CCM_CCGR1_PIT_CTRL_MASK (0x3 << 14) +#define CCM_CCGR1_WDOGA5_CTRL_MASK (0x3 << 28) +#define CCM_CCGR2_IOMUXC_CTRL_MASK (0x3 << 16) +#define CCM_CCGR2_PORTA_CTRL_MASK (0x3 << 18) +#define CCM_CCGR2_PORTB_CTRL_MASK (0x3 << 20) +#define CCM_CCGR2_PORTC_CTRL_MASK (0x3 << 22) +#define CCM_CCGR2_PORTD_CTRL_MASK (0x3 << 24) +#define CCM_CCGR2_PORTE_CTRL_MASK (0x3 << 26) +#define CCM_CCGR3_ANADIG_CTRL_MASK 0x3 +#define CCM_CCGR4_WKUP_CTRL_MASK (0x3 << 20) +#define CCM_CCGR4_CCM_CTRL_MASK (0x3 << 22) +#define CCM_CCGR4_GPC_CTRL_MASK (0x3 << 24) +#define CCM_CCGR6_OCOTP_CTRL_MASK (0x3 << 10) +#define CCM_CCGR6_DDRMC_CTRL_MASK (0x3 << 28) +#define CCM_CCGR7_SDHC1_CTRL_MASK (0x3 << 4) +#define CCM_CCGR9_FEC0_CTRL_MASK 0x3 +#define CCM_CCGR9_FEC1_CTRL_MASK (0x3 << 2) + +#define ANADIG_PLL2_CTRL_ENABLE (1 << 13) +#define ANADIG_PLL2_CTRL_POWERDOWN (1 << 12) +#define ANADIG_PLL2_CTRL_DIV_SELECT 1 +#define ANADIG_PLL1_CTRL_ENABLE (1 << 13) +#define ANADIG_PLL1_CTRL_POWERDOWN (1 << 12) +#define ANADIG_PLL1_CTRL_DIV_SELECT 1 + +#define FASE_CLK_FREQ 24000000 +#define SLOW_CLK_FREQ 32000 +#define PLL1_PFD1_FREQ 500000000 +#define PLL1_PFD2_FREQ 452000000 +#define PLL1_PFD3_FREQ 396000000 +#define PLL1_PFD4_FREQ 528000000 +#define PLL1_MAIN_FREQ 528000000 +#define PLL2_PFD1_FREQ 500000000 +#define PLL2_PFD2_FREQ 396000000 +#define PLL2_PFD3_FREQ 339000000 +#define PLL2_PFD4_FREQ 413000000 +#define PLL2_MAIN_FREQ 528000000 +#define PLL3_MAIN_FREQ 480000000 +#define PLL3_PFD3_FREQ 298000000 +#define PLL5_MAIN_FREQ 500000000 + +#define ENET_EXTERNAL_CLK 50000000 +#define AUDIO_EXTERNAL_CLK 24576000 + +#endif /*__ARCH_ARM_MACH_VF610_CCM_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h new file mode 100644 index 0000000000..c9df32a21d --- /dev/null +++ b/arch/arm/include/asm/arch-vf610/imx-regs.h @@ -0,0 +1,419 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IMX_REGS_H__ +#define __ASM_ARCH_IMX_REGS_H__ + +#define ARCH_MXC + +#define IRAM_BASE_ADDR 0x3F000000 /* internal ram */ +#define IRAM_SIZE 0x00080000 /* 512 KB */ + +#define AIPS0_BASE_ADDR 0x40000000 +#define AIPS1_BASE_ADDR 0x40080000 + +/* AIPS 0 */ +#define MSCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001000) +#define MSCM_IR_BASE_ADDR (AIPS0_BASE_ADDR + 0x00001800) +#define CA5SCU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00002000) +#define CA5_INTD_BASE_ADDR (AIPS0_BASE_ADDR + 0x00003000) +#define CA5_L2C_BASE_ADDR (AIPS0_BASE_ADDR + 0x00006000) +#define NIC0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00008000) +#define NIC1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00009000) +#define NIC2_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000A000) +#define NIC3_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000B000) +#define NIC4_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000C000) +#define NIC5_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000D000) +#define NIC6_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000E000) +#define NIC7_BASE_ADDR (AIPS0_BASE_ADDR + 0x0000F000) +#define AHBTZASC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00010000) +#define TZASC_SYS0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00011000) +#define TZASC_SYS1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00012000) +#define TZASC_GFX_BASE_ADDR (AIPS0_BASE_ADDR + 0x00013000) +#define TZASC_DDR0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00014000) +#define TZASC_DDR1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00015000) +#define CSU_BASE_ADDR (AIPS0_BASE_ADDR + 0x00017000) +#define DMA0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00018000) +#define DMA0_TCD_BASE_ADDR (AIPS0_BASE_ADDR + 0x00019000) +#define SEMA4_BASE_ADDR (AIPS0_BASE_ADDR + 0x0001D000) +#define FB_BASE_ADDR (AIPS0_BASE_ADDR + 0x0001E000) +#define DMA_MUX0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00024000) +#define UART0_BASE (AIPS0_BASE_ADDR + 0x00027000) +#define UART1_BASE (AIPS0_BASE_ADDR + 0x00028000) +#define UART2_BASE (AIPS0_BASE_ADDR + 0x00029000) +#define UART3_BASE (AIPS0_BASE_ADDR + 0x0002A000) +#define SPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002C000) +#define SPI1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002D000) +#define SAI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0002F000) +#define SAI1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00030000) +#define SAI2_BASE_ADDR (AIPS0_BASE_ADDR + 0x00031000) +#define SAI3_BASE_ADDR (AIPS0_BASE_ADDR + 0x00032000) +#define CRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00033000) +#define PDB_BASE_ADDR (AIPS0_BASE_ADDR + 0x00036000) +#define PIT_BASE_ADDR (AIPS0_BASE_ADDR + 0x00037000) +#define FTM0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00038000) +#define FTM1_BASE_ADDR (AIPS0_BASE_ADDR + 0x00039000) +#define ADC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003B000) +#define TCON0_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003D000) +#define WDOG1_BASE_ADDR (AIPS0_BASE_ADDR + 0x0003E000) +#define LPTMR_BASE_ADDR (AIPS0_BASE_ADDR + 0x00040000) +#define RLE_BASE_ADDR (AIPS0_BASE_ADDR + 0x00042000) +#define MLB_BASE_ADDR (AIPS0_BASE_ADDR + 0x00043000) +#define QSPI0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00044000) +#define IOMUXC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00048000) +#define ANADIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00050000) +#define SCSCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x00052000) +#define ASRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x00060000) +#define SPDIF_BASE_ADDR (AIPS0_BASE_ADDR + 0x00061000) +#define ESAI_BASE_ADDR (AIPS0_BASE_ADDR + 0x00062000) +#define ESAI_FIFO_BASE_ADDR (AIPS0_BASE_ADDR + 0x00063000) +#define WDOG_BASE_ADDR (AIPS0_BASE_ADDR + 0x00065000) +#define I2C0_BASE_ADDR (AIPS0_BASE_ADDR + 0x00066000) +#define WKUP_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006A000) +#define CCM_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006B000) +#define GPC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006C000) +#define VREG_DIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006D000) +#define SRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006E000) +#define CMU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006F000) + +/* AIPS 1 */ +#define OCOTP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00025000) +#define DDR_BASE_ADDR (AIPS1_BASE_ADDR + 0x0002E000) +#define ESDHC0_BASE_ADDR (AIPS1_BASE_ADDR + 0x00031000) +#define ESDHC1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00032000) +#define ENET_BASE_ADDR (AIPS1_BASE_ADDR + 0x00050000) + +/* MUX mode and PAD ctrl are in one register */ +#define CONFIG_IOMUX_SHARE_CONF_REG + +#define FEC_QUIRK_ENET_MAC + +/* MSCM interrupt rounter */ +#define MSCM_IRSPRC_CP0_EN 1 +#define MSCM_IRSPRC_NUM 112 + +/* DDRMC */ +#define DDRMC_PHY_DQ_TIMING 0x00002613 +#define DDRMC_PHY_DQS_TIMING 0x00002615 +#define DDRMC_PHY_CTRL 0x01210080 +#define DDRMC_PHY_MASTER_CTRL 0x0001012a +#define DDRMC_PHY_SLAVE_CTRL 0x00012020 + +#define DDRMC_PHY50_DDR3_MODE (1 << 12) +#define DDRMC_PHY50_EN_SW_HALF_CYCLE (1 << 8) + +#define DDRMC_CR00_DRAM_CLASS_DDR3 (0x6 << 8) +#define DDRMC_CR00_DRAM_CLASS_LPDDR2 (0x5 << 8) +#define DDRMC_CR00_START 1 +#define DDRMC_CR02_DRAM_TINIT(v) ((v) & 0xffffff) +#define DDRMC_CR10_TRST_PWRON(v) (v) +#define DDRMC_CR11_CKE_INACTIVE(v) (v) +#define DDRMC_CR12_WRLAT(v) (((v) & 0x1f) << 8) +#define DDRMC_CR12_CASLAT_LIN(v) ((v) & 0x3f) +#define DDRMC_CR13_TRC(v) (((v) & 0xff) << 24) +#define DDRMC_CR13_TRRD(v) (((v) & 0xff) << 16) +#define DDRMC_CR13_TCCD(v) (((v) & 0x1f) << 8) +#define DDRMC_CR13_TBST_INT_INTERVAL(v) ((v) & 0x7) +#define DDRMC_CR14_TFAW(v) (((v) & 0x3f) << 24) +#define DDRMC_CR14_TRP(v) (((v) & 0x1f) << 16) +#define DDRMC_CR14_TWTR(v) (((v) & 0xf) << 8) +#define DDRMC_CR14_TRAS_MIN(v) ((v) & 0xff) +#define DDRMC_CR16_TMRD(v) (((v) & 0x1f) << 24) +#define DDRMC_CR16_TRTP(v) (((v) & 0xf) << 16) +#define DDRMC_CR17_TRAS_MAX(v) (((v) & 0x1ffff) << 8) +#define DDRMC_CR17_TMOD(v) ((v) & 0xff) +#define DDRMC_CR18_TCKESR(v) (((v) & 0x1f) << 8) +#define DDRMC_CR18_TCKE(v) ((v) & 0x7) +#define DDRMC_CR20_AP_EN (1 << 24) +#define DDRMC_CR21_TRCD_INT(v) (((v) & 0xff) << 16) +#define DDRMC_CR21_TRAS_LOCKOUT (1 << 8) +#define DDRMC_CR21_CCMAP_EN 1 +#define DDRMC_CR22_TDAL(v) (((v) & 0x3f) << 16) +#define DDRMC_CR23_BSTLEN(v) (((v) & 0x7) << 24) +#define DDRMC_CR23_TDLL(v) ((v) & 0xff) +#define DDRMC_CR24_TRP_AB(v) ((v) & 0x1f) +#define DDRMC_CR25_TREF_EN (1 << 16) +#define DDRMC_CR26_TREF(v) (((v) & 0xffff) << 16) +#define DDRMC_CR26_TRFC(v) ((v) & 0x3ff) +#define DDRMC_CR28_TREF_INT(v) ((v) & 0xffff) +#define DDRMC_CR29_TPDEX(v) ((v) & 0xffff) +#define DDRMC_CR30_TXPDLL(v) ((v) & 0xffff) +#define DDRMC_CR31_TXSNR(v) (((v) & 0xffff) << 16) +#define DDRMC_CR31_TXSR(v) ((v) & 0xffff) +#define DDRMC_CR33_EN_QK_SREF (1 << 16) +#define DDRMC_CR34_CKSRX(v) (((v) & 0xf) << 16) +#define DDRMC_CR34_CKSRE(v) (((v) & 0xf) << 8) +#define DDRMC_CR38_FREQ_CHG_EN (1 << 8) +#define DDRMC_CR39_PHY_INI_COM(v) (((v) & 0xffff) << 16) +#define DDRMC_CR39_PHY_INI_STA(v) (((v) & 0xff) << 8) +#define DDRMC_CR39_FRQ_CH_DLLOFF(v) ((v) & 0x3) +#define DDRMC_CR41_PHY_INI_STRT_INI_DIS 1 +#define DDRMC_CR48_MR1_DA_0(v) (((v) & 0xffff) << 16) +#define DDRMC_CR48_MR0_DA_0(v) ((v) & 0xffff) +#define DDRMC_CR66_ZQCL(v) (((v) & 0xfff) << 16) +#define DDRMC_CR66_ZQINIT(v) ((v) & 0xfff) +#define DDRMC_CR67_ZQCS(v) ((v) & 0xfff) +#define DDRMC_CR69_ZQ_ON_SREF_EX(v) (((v) & 0xf) << 8) +#define DDRMC_CR70_REF_PER_ZQ(v) (v) +#define DDRMC_CR72_ZQCS_ROTATE (1 << 24) +#define DDRMC_CR73_APREBIT(v) (((v) & 0xf) << 24) +#define DDRMC_CR73_COL_DIFF(v) (((v) & 0x7) << 16) +#define DDRMC_CR73_ROW_DIFF(v) (((v) & 0x3) << 8) +#define DDRMC_CR74_BANKSPLT_EN (1 << 24) +#define DDRMC_CR74_ADDR_CMP_EN (1 << 16) +#define DDRMC_CR74_CMD_AGE_CNT(v) (((v) & 0xff) << 8) +#define DDRMC_CR74_AGE_CNT(v) ((v) & 0xff) +#define DDRMC_CR75_RW_PG_EN (1 << 24) +#define DDRMC_CR75_RW_EN (1 << 16) +#define DDRMC_CR75_PRI_EN (1 << 8) +#define DDRMC_CR75_PLEN 1 +#define DDRMC_CR76_NQENT_ACTDIS(v) (((v) & 0x7) << 24) +#define DDRMC_CR76_D_RW_G_BKCN(v) (((v) & 0x3) << 16) +#define DDRMC_CR76_W2R_SPLT_EN (1 << 8) +#define DDRMC_CR76_CS_EN 1 +#define DDRMC_CR77_CS_MAP (1 << 24) +#define DDRMC_CR77_DI_RD_INTLEAVE (1 << 8) +#define DDRMC_CR77_SWAP_EN 1 +#define DDRMC_CR78_BUR_ON_FLY_BIT(v) ((v) & 0xf) +#define DDRMC_CR79_CTLUPD_AREF (1 << 24) +#define DDRMC_CR82_INT_MASK 0x1fffffff +#define DDRMC_CR87_ODT_WR_MAPCS0 (1 << 24) +#define DDRMC_CR87_ODT_RD_MAPCS0 (1 << 16) +#define DDRMC_CR88_TODTL_CMD(v) (((v) & 0x1f) << 16) +#define DDRMC_CR89_AODT_RWSMCS(v) ((v) & 0xf) +#define DDRMC_CR91_R2W_SMCSDL(v) (((v) & 0x7) << 16) +#define DDRMC_CR96_WLMRD(v) (((v) & 0x3f) << 8) +#define DDRMC_CR96_WLDQSEN(v) ((v) & 0x3f) +#define DDRMC_CR105_RDLVL_DL_0(v) (((v) & 0xff) << 8) +#define DDRMC_CR110_RDLVL_DL_1(v) ((v) & 0xff) +#define DDRMC_CR114_RDLVL_GTDL_2(v) (((v) & 0xffff) << 8) +#define DDRMC_CR117_AXI0_W_PRI(v) (((v) & 0x3) << 8) +#define DDRMC_CR117_AXI0_R_PRI(v) ((v) & 0x3) +#define DDRMC_CR118_AXI1_W_PRI(v) (((v) & 0x3) << 24) +#define DDRMC_CR118_AXI1_R_PRI(v) (((v) & 0x3) << 16) +#define DDRMC_CR120_AXI0_PRI1_RPRI(v) (((v) & 0xf) << 24) +#define DDRMC_CR120_AXI0_PRI0_RPRI(v) (((v) & 0xf) << 16) +#define DDRMC_CR121_AXI0_PRI3_RPRI(v) (((v) & 0xf) << 8) +#define DDRMC_CR121_AXI0_PRI2_RPRI(v) ((v) & 0xf) +#define DDRMC_CR122_AXI1_PRI1_RPRI(v) (((v) & 0xf) << 24) +#define DDRMC_CR122_AXI1_PRI0_RPRI(v) (((v) & 0xf) << 16) +#define DDRMC_CR122_AXI0_PRIRLX(v) ((v) & 0x3ff) +#define DDRMC_CR123_AXI1_PRI3_RPRI(v) (((v) & 0xf) << 8) +#define DDRMC_CR123_AXI1_PRI2_RPRI(v) ((v) & 0xf) +#define DDRMC_CR124_AXI1_PRIRLX(v) ((v) & 0x3ff) +#define DDRMC_CR126_PHY_RDLAT(v) (((v) & 0x3f) << 8) +#define DDRMC_CR132_WRLAT_ADJ(v) (((v) & 0x1f) << 8) +#define DDRMC_CR132_RDLAT_ADJ(v) ((v) & 0x3f) +#define DDRMC_CR139_PHY_WRLV_RESPLAT(v) (((v) & 0xff) << 24) +#define DDRMC_CR139_PHY_WRLV_LOAD(v) (((v) & 0xff) << 16) +#define DDRMC_CR139_PHY_WRLV_DLL(v) (((v) & 0xff) << 8) +#define DDRMC_CR139_PHY_WRLV_EN(v) ((v) & 0xff) +#define DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(v) (((v) & 0x1f) << 27) +#define DDRMC_CR154_PAD_ZQ_MODE(v) (((v) & 0x3) << 21) +#define DDRMC_CR155_AXI0_AWCACHE (1 << 10) +#define DDRMC_CR155_PAD_ODT_BYTE1(v) ((v) & 0x7) +#define DDRMC_CR158_TWR(v) ((v) & 0x3f) + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/types.h> + +/* System Reset Controller (SRC) */ +struct src { + u32 scr; + u32 sbmr1; + u32 srsr; + u32 secr; + u32 gpsr; + u32 sicr; + u32 simr; + u32 sbmr2; + u32 gpr0; + u32 gpr1; + u32 gpr2; + u32 gpr3; + u32 gpr4; + u32 hab0; + u32 hab1; + u32 hab2; + u32 hab3; + u32 hab4; + u32 hab5; + u32 misc0; + u32 misc1; + u32 misc2; + u32 misc3; +}; + +/* Periodic Interrupt Timer (PIT) */ +struct pit_reg { + u32 mcr; + u32 recv0[55]; + u32 ltmr64h; + u32 ltmr64l; + u32 recv1[6]; + u32 ldval0; + u32 cval0; + u32 tctrl0; + u32 tflg0; + u32 ldval1; + u32 cval1; + u32 tctrl1; + u32 tflg1; + u32 ldval2; + u32 cval2; + u32 tctrl2; + u32 tflg2; + u32 ldval3; + u32 cval3; + u32 tctrl3; + u32 tflg3; + u32 ldval4; + u32 cval4; + u32 tctrl4; + u32 tflg4; + u32 ldval5; + u32 cval5; + u32 tctrl5; + u32 tflg5; + u32 ldval6; + u32 cval6; + u32 tctrl6; + u32 tflg6; + u32 ldval7; + u32 cval7; + u32 tctrl7; + u32 tflg7; +}; + +/* Watchdog Timer (WDOG) */ +struct wdog_regs { + u16 wcr; + u16 wsr; + u16 wrsr; + u16 wicr; + u16 wmcr; +}; + +/* LPDDR2/DDR3 SDRAM Memory Controller (DDRMC) */ +struct ddrmr_regs { + u32 cr[162]; + u32 rsvd[94]; + u32 phy[53]; +}; + +/* On-Chip One Time Programmable Controller (OCOTP) */ +struct ocotp_regs { + u32 ctrl; + u32 ctrl_set; + u32 ctrl_clr; + u32 ctrl_tog; + u32 timing; + u32 rsvd0[3]; + u32 data; + u32 rsvd1[3]; + u32 read_ctrl; + u32 rsvd2[3]; + u32 read_fuse_data; + u32 rsvd3[7]; + u32 scs; + u32 scs_set; + u32 scs_clr; + u32 scs_tog; + u32 crc_addr; + u32 rsvd4[3]; + u32 crc_value; + u32 rsvd5[3]; + u32 version; + u32 rsvd6[0xdb]; + + struct fuse_bank { + u32 fuse_regs[0x20]; + } bank[16]; +}; + +struct fuse_bank0_regs { + u32 lock; + u32 rsvd0[3]; + u32 uid_low; + u32 rsvd1[3]; + u32 uid_high; + u32 rsvd2[0x17]; +}; + +struct fuse_bank4_regs { + u32 sjc_resp0; + u32 rsvd0[3]; + u32 sjc_resp1; + u32 rsvd1[3]; + u32 mac_addr0; + u32 rsvd2[3]; + u32 mac_addr1; + u32 rsvd3[3]; + u32 mac_addr2; + u32 rsvd4[3]; + u32 mac_addr3; + u32 rsvd5[3]; + u32 gp1; + u32 rsvd6[3]; + u32 gp2; + u32 rsvd7[3]; +}; + +/* UART */ +struct lpuart_fsl { + u8 ubdh; + u8 ubdl; + u8 uc1; + u8 uc2; + u8 us1; + u8 us2; + u8 uc3; + u8 ud; + u8 uma1; + u8 uma2; + u8 uc4; + u8 uc5; + u8 ued; + u8 umodem; + u8 uir; + u8 reserved; + u8 upfifo; + u8 ucfifo; + u8 usfifo; + u8 utwfifo; + u8 utcfifo; + u8 urwfifo; + u8 urcfifo; + u8 rsvd[28]; +}; + +/* MSCM Interrupt Router */ +struct mscm_ir { + u32 ircp0ir; + u32 ircp1ir; + u32 rsvd1[6]; + u32 ircpgir; + u32 rsvd2[23]; + u16 irsprc[112]; + u16 rsvd3[848]; +}; + +#endif /* __ASSEMBLER__*/ + +#endif /* __ASM_ARCH_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h new file mode 100644 index 0000000000..1c728fa6b7 --- /dev/null +++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h @@ -0,0 +1,101 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IOMUX_VF610_H__ +#define __IOMUX_VF610_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Pad control groupings */ +#define VF610_UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_25ohm | \ + PAD_CTL_OBE_IBE_ENABLE) +#define VF610_SDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_20ohm | \ + PAD_CTL_OBE_IBE_ENABLE) +#define VF610_ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_50ohm | \ + PAD_CTL_OBE_IBE_ENABLE) +#define VF610_DDR_PAD_CTRL PAD_CTL_DSE_25ohm + +enum { + VF610_PAD_PTA6__RMII0_CLKIN = IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTB4__UART1_TX = IOMUX_PAD(0x0068, 0x0068, 2, 0x0380, 0, VF610_UART_PAD_CTRL), + VF610_PAD_PTB5__UART1_RX = IOMUX_PAD(0x006c, 0x006c, 2, 0x037c, 0, VF610_UART_PAD_CTRL), + VF610_PAD_PTC1__RMII0_MDIO = IOMUX_PAD(0x00b8, 0x00b8, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC0__RMII0_MDC = IOMUX_PAD(0x00b4, 0x00b4, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC2__RMII0_CRS_DV = IOMUX_PAD(0x00bc, 0x00bc, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC3__RMII0_RD1 = IOMUX_PAD(0x00c0, 0x00c0, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC4__RMII0_RD0 = IOMUX_PAD(0x00c4, 0x00c4, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC5__RMII0_RXER = IOMUX_PAD(0x00c8, 0x00c8, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC6__RMII0_TD1 = IOMUX_PAD(0x00cc, 0x00cc, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC7__RMII0_TD0 = IOMUX_PAD(0x00D0, 0x00D0, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTC8__RMII0_TXEN = IOMUX_PAD(0x00D4, 0x00D4, 1, __NA_, 0, VF610_ENET_PAD_CTRL), + VF610_PAD_PTA24__ESDHC1_CLK = IOMUX_PAD(0x0038, 0x0038, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_PTA25__ESDHC1_CMD = IOMUX_PAD(0x003c, 0x003c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_PTA26__ESDHC1_DAT0 = IOMUX_PAD(0x0040, 0x0040, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_PTA27__ESDHC1_DAT1 = IOMUX_PAD(0x0044, 0x0044, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_PTA28__ESDHC1_DAT2 = IOMUX_PAD(0x0048, 0x0048, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_PTA29__ESDHC1_DAT3 = IOMUX_PAD(0x004c, 0x004c, 5, __NA_, 0, VF610_SDHC_PAD_CTRL), + VF610_PAD_DDR_A15__DDR_A_15 = IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A14__DDR_A_14 = IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A13__DDR_A_13 = IOMUX_PAD(0x0228, 0x0228, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A12__DDR_A_12 = IOMUX_PAD(0x022c, 0x022c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A11__DDR_A_11 = IOMUX_PAD(0x0230, 0x0230, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A10__DDR_A_10 = IOMUX_PAD(0x0234, 0x0234, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A9__DDR_A_9 = IOMUX_PAD(0x0238, 0x0238, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A8__DDR_A_8 = IOMUX_PAD(0x023c, 0x023c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A7__DDR_A_7 = IOMUX_PAD(0x0240, 0x0240, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A6__DDR_A_6 = IOMUX_PAD(0x0244, 0x0244, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A5__DDR_A_5 = IOMUX_PAD(0x0248, 0x0248, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A4__DDR_A_4 = IOMUX_PAD(0x024c, 0x024c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A3__DDR_A_3 = IOMUX_PAD(0x0250, 0x0250, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A2__DDR_A_2 = IOMUX_PAD(0x0254, 0x0254, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_A1__DDR_A_1 = IOMUX_PAD(0x0258, 0x0258, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_BA2__DDR_BA_2 = IOMUX_PAD(0x0260, 0x0260, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_BA1__DDR_BA_1 = IOMUX_PAD(0x0264, 0x0264, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_BA0__DDR_BA_0 = IOMUX_PAD(0x0268, 0x0268, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_CAS__DDR_CAS_B = IOMUX_PAD(0x026c, 0x026c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_CKE__DDR_CKE_0 = IOMUX_PAD(0x0270, 0x0270, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_CLK__DDR_CLK_0 = IOMUX_PAD(0x0274, 0x0274, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_CS__DDR_CS_B_0 = IOMUX_PAD(0x0278, 0x0278, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D15__DDR_D_15 = IOMUX_PAD(0x027c, 0x027c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D14__DDR_D_14 = IOMUX_PAD(0x0280, 0x0280, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D13__DDR_D_13 = IOMUX_PAD(0x0284, 0x0284, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D12__DDR_D_12 = IOMUX_PAD(0x0288, 0x0288, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D11__DDR_D_11 = IOMUX_PAD(0x028c, 0x028c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D10__DDR_D_10 = IOMUX_PAD(0x0290, 0x0290, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D9__DDR_D_9 = IOMUX_PAD(0x0294, 0x0294, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D8__DDR_D_8 = IOMUX_PAD(0x0298, 0x0298, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D7__DDR_D_7 = IOMUX_PAD(0x029c, 0x029c, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D6__DDR_D_6 = IOMUX_PAD(0x02a0, 0x02a0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D5__DDR_D_5 = IOMUX_PAD(0x02a4, 0x02a4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D4__DDR_D_4 = IOMUX_PAD(0x02a8, 0x02a8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D3__DDR_D_3 = IOMUX_PAD(0x02ac, 0x02ac, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D2__DDR_D_2 = IOMUX_PAD(0x02b0, 0x02b0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D1__DDR_D_1 = IOMUX_PAD(0x02b4, 0x02b4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_D0__DDR_D_0 = IOMUX_PAD(0x02b8, 0x02b8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_DQM1__DDR_DQM_1 = IOMUX_PAD(0x02bc, 0x02bc, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_DQM0__DDR_DQM_0 = IOMUX_PAD(0x02c0, 0x02c0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_DQS1__DDR_DQS_1 = IOMUX_PAD(0x02c4, 0x02c4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_DQS0__DDR_DQS_0 = IOMUX_PAD(0x02c8, 0x02c8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_RAS__DDR_RAS_B = IOMUX_PAD(0x02cc, 0x02cc, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_WE__DDR_WE_B = IOMUX_PAD(0x02d0, 0x02d0, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_ODT1__DDR_ODT_0 = IOMUX_PAD(0x02d4, 0x02d4, 0, __NA_, 0, VF610_DDR_PAD_CTRL), + VF610_PAD_DDR_ODT0__DDR_ODT_1 = IOMUX_PAD(0x02d8, 0x02d8, 0, __NA_, 0, VF610_DDR_PAD_CTRL), +}; + +#endif /* __IOMUX_VF610_H__ */ diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 5f11d7b72e..1b94a99c54 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -581,7 +581,7 @@ (0xFF << EMIF_SYS_ADDR_SHIFT)) #define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5 -#define EMIF_EXT_PHY_CTRL_CONST_REG 0x13 +#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14 /* Reg mapping structure */ struct emif_reg_struct { @@ -855,13 +855,10 @@ struct dmm_lisa_map_regs { #define DPD_ENABLE 1 /* Maximum delay before Low Power Modes */ -#ifndef CONFIG_OMAP54XX -#define REG_CS_TIM 0xF -#else #define REG_CS_TIM 0x0 -#endif -#define REG_SR_TIM 0xF -#define REG_PD_TIM 0xF +#define REG_SR_TIM 0x0 +#define REG_PD_TIM 0x0 + /* EMIF_PWR_MGMT_CTRL register */ #define EMIF_PWR_MGMT_CTRL (\ @@ -1113,6 +1110,7 @@ struct emif_regs { u32 freq; u32 sdram_config_init; u32 sdram_config; + u32 sdram_config2; u32 ref_ctrl; u32 sdram_tim1; u32 sdram_tim2; diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 0b4e76333e..ebf54cf187 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -121,6 +121,24 @@ typedef u64 iomux_v3_cfg_t; #define PAD_CTL_DSE_40ohm (6 << 3) #define PAD_CTL_DSE_34ohm (7 << 3) +#elif defined(CONFIG_VF610) + +#define PAD_MUX_MODE_SHIFT 20 + +#define PAD_CTL_SPEED_MED (1 << 12) +#define PAD_CTL_SPEED_HIGH (3 << 12) + +#define PAD_CTL_DSE_50ohm (3 << 6) +#define PAD_CTL_DSE_25ohm (6 << 6) +#define PAD_CTL_DSE_20ohm (7 << 6) + +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PKE (1 << 3) +#define PAD_CTL_PUE (1 << 2 | PAD_CTL_PKE) + +#define PAD_CTL_OBE_IBE_ENABLE (3 << 0) + #else #define PAD_CTL_DVS (1 << 13) diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index baeef4e5bb..0dbe81b59c 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -29,7 +29,7 @@ #include <common.h> -#define NUM_SYS_CLKS 8 +#define NUM_SYS_CLKS 7 struct prcm_regs { /* cm1.ckgen */ @@ -242,6 +242,8 @@ struct prcm_regs { u32 cm_l3init_fsusb_clkctrl; u32 cm_l3init_ocp2scp1_clkctrl; + u32 prm_irqstatus_mpu_2; + /* cm2.l4per */ u32 cm_l4per_clkstctrl; u32 cm_l4per_dynamicdep; @@ -301,6 +303,7 @@ struct prcm_regs { /* l4 wkup regs */ u32 cm_abe_pll_ref_clksel; u32 cm_sys_clksel; + u32 cm_abe_pll_sys_clksel; u32 cm_wkup_clkstctrl; u32 cm_wkup_l4wkup_clkctrl; u32 cm_wkup_wdtimer1_clkctrl; @@ -328,6 +331,8 @@ struct prcm_regs { u32 prm_sldo_mpu_ctrl; u32 prm_sldo_mm_setup; u32 prm_sldo_mm_ctrl; + u32 prm_abbldo_mpu_setup; + u32 prm_abbldo_mpu_ctrl; u32 cm_div_m4_dpll_core; u32 cm_div_m5_dpll_core; @@ -346,10 +351,15 @@ struct prcm_regs { u32 cm_l3init_usbphy_clkctrl; u32 cm_l4per_mcbsp4_clkctrl; u32 prm_vc_cfg_channel; + + /* SCRM stuff, used by some boards */ + u32 scrm_auxclk0; + u32 scrm_auxclk1; }; struct omap_sys_ctrl_regs { u32 control_status; + u32 control_std_fuse_opp_vdd_mpu_2; u32 control_core_mmr_lock1; u32 control_core_mmr_lock2; u32 control_core_mmr_lock3; @@ -362,6 +372,7 @@ struct omap_sys_ctrl_regs { u32 control_ldosram_iva_voltage_ctrl; u32 control_ldosram_mpu_voltage_ctrl; u32 control_ldosram_core_voltage_ctrl; + u32 control_usbotghs_ctrl; u32 control_padconf_core_base; u32 control_paconf_global; u32 control_paconf_mode; @@ -394,6 +405,7 @@ struct omap_sys_ctrl_regs { u32 control_ddrio_0; u32 control_ddrio_1; u32 control_ddrio_2; + u32 control_ddr_control_ext_0; u32 control_lpddr2io1_0; u32 control_lpddr2io1_1; u32 control_lpddr2io1_2; @@ -419,6 +431,7 @@ struct omap_sys_ctrl_regs { u32 control_port_emif2_sdram_config; u32 control_emif1_sdram_config_ext; u32 control_emif2_sdram_config_ext; + u32 control_wkup_ldovbb_mpu_voltage_ctrl; u32 control_smart1nopmio_padconf_0; u32 control_smart1nopmio_padconf_1; u32 control_padconf_mode; @@ -494,11 +507,25 @@ struct pmic_data { u32 start_code; unsigned gpio; int gpio_en; + u32 i2c_slave_addr; + void (*pmic_bus_init)(void); + int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data); +}; + +/** + * struct volts_efuse_data - efuse definition for voltage + * @reg: register address for efuse + * @reg_bits: Number of bits in a register address, mandatory. + */ +struct volts_efuse_data { + u32 reg; + u8 reg_bits; }; struct volts { u32 value; u32 addr; + struct volts_efuse_data efuse; struct pmic_data *pmic; }; @@ -506,6 +533,9 @@ struct vcores_data { struct volts mpu; struct volts core; struct volts mm; + struct volts gpu; + struct volts eve; + struct volts iva; }; extern struct prcm_regs const **prcm; @@ -545,9 +575,9 @@ void enable_non_essential_clocks(void); void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); - -/* Max value for DPLL multiplier M */ -#define OMAP_DPLL_MAX_N 127 +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp); +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); /* HW Init Context */ #define OMAP_INIT_CONTEXT_SPL 0 @@ -555,11 +585,32 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 +/* ABB */ +#define OMAP_ABB_NOMINAL_OPP 0 +#define OMAP_ABB_FAST_OPP 1 +#define OMAP_ABB_SLOW_OPP 3 +#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0) +#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1) +#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2) +#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6) +#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0) +#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2) +#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1) +#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8) + static inline u32 omap_revision(void) { extern u32 *const omap_si_rev; return *omap_si_rev; } + +#define OMAP54xx 0x54000000 + +static inline u8 is_omap54xx(void) +{ + extern u32 *const omap_si_rev; + return ((*omap_si_rev & 0xFF000000) == OMAP54xx); +} #endif /* diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index b545fb79bc..8b1c8ed4bf 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -27,7 +27,7 @@ void __flush_cache(unsigned long start, unsigned long size) { -#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136) +#if defined(CONFIG_ARM1136) void arm1136_cache_flush(void); arm1136_cache_flush(); diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index a9657d190f..a5bffb8da6 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -97,13 +97,13 @@ ENTRY(_main) * 'here' but relocated. */ - ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ + ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ sub r8, r8, #GD_SIZE /* new GD is below bd */ adr lr, here - ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ + ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ add lr, lr, r0 ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */ b relocate_code |