Merge branch '2019-04-27-master-imports'

- Various vexpress, taurus, da850evm, lpc32xx, brxre1 fixes/updates
- btrfs fixes
- Add AM65x HS EVM
- Other small fixes

14 files changed, 2367 insertions, 9 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dd5ac69a8e..0a76138a92 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1464,7 +1464,7 @@ endchoice
 
 config TI_SECURE_DEVICE
 	bool "HS Device Type Support"
-	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
+	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
 	help
 	  If a high secure (HS) device type is being used, this config
 	  must be set. This option impacts various aspects of the
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
index 404ccbb716..b3ca686040 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
@@ -33,6 +33,9 @@ static void lpc32xx_timer_reset(struct timer_regs *timer, u32 freq)
 
 	/* Set prescale counter value */
 	writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
+
+	/* Ensure that the counter is not reset when matching TC */
+	writel(0,  &timer->mcr);
 }
 
 static void lpc32xx_timer_count(struct timer_regs *timer, int enable)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1366ae93e2..b4dc57edbd 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -724,6 +724,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 
+dtb-$(CONFIG_TARGET_VEXPRESS_CA5X2) += vexpress-v2p-ca5s.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
+
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
diff --git a/arch/arm/dts/vexpress-v2m-rs1.dtsi b/arch/arm/dts/vexpress-v2m-rs1.dtsi
new file mode 100644
index 0000000000..d3963e9eaf
--- /dev/null
+++ b/arch/arm/dts/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,437 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+/ {
+	smb@8000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			arm,v2m-memory-map = "rs1";
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
+
+			psram@1,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@2,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@2,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
+
+			iofpga@3,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: uart@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: uart@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: uart@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: uart@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/vexpress-v2m.dtsi b/arch/arm/dts/vexpress-v2m.dtsi
new file mode 100644
index 0000000000..798c97aff7
--- /dev/null
+++ b/arch/arm/dts/vexpress-v2m.dtsi
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+/ {
+	smb@4000000 {
+		motherboard {
+			model = "V2M-P1";
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				port1-otg;
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: uart@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: uart@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: uart@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: uart@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/dts/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 0000000000..00cd9f5bef
--- /dev/null
+++ b/arch/arm/dts/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA15_CA7";
+	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <990>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+			capacity-dmips-mhz = <516>;
+			dynamic-power-coefficient = <133>;
+		};
+
+		idle-states {
+			CLUSTER_SLEEP_BIG: cluster-sleep-big {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	wdt@2a490000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0 0x2a490000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdogclk", "apb_pclk";
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			 compatible = "arm,cci-400-pmu,r0";
+			 reg = <0x9000 0x5000>;
+			 interrupts = <0 105 4>,
+				      <0 101 4>,
+				      <0 102 4>,
+				      <0 103 4>,
+				      <0 104 4>;
+		};
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ff00000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu-a15 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>;
+	};
+
+	pmu-a7 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <0 128 4>,
+			     <0 129 4>,
+			     <0 130 4>;
+		interrupt-affinity = <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>;
+	};
+
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		oscclk3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		hdlcd_clk: oscclk5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: oscclk6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		oscclk7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		oscclk8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt-a15 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A15 Vcore";
+		};
+
+		volt-a7 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A7 Vcore";
+		};
+
+		amp-a15 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp-a7 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp-dcc {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power-a15 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+
+		power-a7 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy-a15 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+			label = "A15 Jcore";
+		};
+
+		energy-a7 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
+			label = "A7 Jcore";
+		};
+	};
+
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	etm@2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port5>;
+				};
+			};
+		};
+	};
+
+	smb: smb@8000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x3fef0000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/dts/vexpress-v2p-ca5s.dts b/arch/arm/dts/vexpress-v2p-ca5s.dts
new file mode 100644
index 0000000000..d5b47d526f
--- /dev/null
+++ b/arch/arm/dts/vexpress-v2p-ca5s.dts
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: oscclk0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: oscclk1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		oscclk2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: oscclk3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		oscclk4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: oscclk5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: smb@8000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x04000000>,
+			 <1 0 0x14000000 0x04000000>,
+			 <2 0 0x18000000 0x04000000>,
+			 <3 0 0x1c000000 0x04000000>,
+			 <4 0 0x0c000000 0x04000000>,
+			 <5 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/dts/vexpress-v2p-ca9.dts b/arch/arm/dts/vexpress-v2p-ca9.dts
new file mode 100644
index 0000000000..d796efaadb
--- /dev/null
+++ b/arch/arm/dts/vexpress-v2p-ca9.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m.dtsi"
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 3 is physically at 0x4c000000 */
+		vram: vram@4c000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x4c000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 1024x768 16bpp @65MHz */
+		max-memory-bandwidth = <95000000>;
+
+		port {
+			clcd_pads_ct: endpoint {
+				remote-endpoint = <&dvi_bridge_in_ct>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "timclk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdogclk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+		interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: extsaxiclk {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: clcdclk {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: tcrefclk {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		volt-vd10 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		volt-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		volt-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		volt-vcc1v8 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		volt-ddr2vtt {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		volt-vcc3v3 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power-vd10-s2 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power-vd10-s3 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	smb: smb@4000000 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x04000000>,
+			 <1 0 0x44000000 0x04000000>,
+			 <2 0 0x48000000 0x04000000>,
+			 <3 0 0x4c000000 0x04000000>,
+			 <7 0 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+	};
+
+	site2: hsb@e0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe0000000 0x20000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile
index bd4ab361b2..0c3a4f7db1 100644
--- a/arch/arm/mach-k3/Makefile
+++ b/arch/arm/mach-k3/Makefile
@@ -6,4 +6,5 @@
 obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
 obj-$(CONFIG_ARM64) += arm64-mmu.o
 obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
+obj-$(CONFIG_TI_SECURE_DEVICE) += security.o
 obj-y += common.o
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index 77cd15f388..60a580305d 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -49,11 +49,16 @@ static void ctrl_mmr_unlock(void)
 	mmr_unlock(CTRL_MMR0_BASE, 7);
 }
 
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __attribute__((section(".data")));
+
 static void store_boot_index_from_rom(void)
 {
-	u32 *boot_index = (u32 *)K3_BOOT_PARAM_TABLE_INDEX_VAL;
-
-	*boot_index = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
 }
 
 void board_init_f(ulong dummy)
@@ -92,7 +97,6 @@ u32 spl_boot_mode(const u32 boot_device)
 {
 #if defined(CONFIG_SUPPORT_EMMC_BOOT)
 	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
-	u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL);
 
 	u32 bootmode = (devstat & CTRLMMR_MAIN_DEVSTAT_BOOTMODE_MASK) >>
 			CTRLMMR_MAIN_DEVSTAT_BOOTMODE_SHIFT;
@@ -168,7 +172,6 @@ static u32 __get_primary_bootmedia(u32 devstat)
 u32 spl_boot_device(void)
 {
 	u32 devstat = readl(CTRLMMR_MAIN_DEVSTAT);
-	u32 bootindex = readl(K3_BOOT_PARAM_TABLE_INDEX_VAL);
 
 	if (bootindex == K3_PRIMARY_BOOTMODE)
 		return __get_primary_bootmedia(devstat);
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index be00d79fb0..2d8f61f9db 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -36,6 +36,14 @@ cmd_gencert = cat $(srctree)/tools/k3_x509template.txt | sed $(SED_OPTS) > u-boo
 # If external key is not provided, generate key using openssl.
 ifeq ($(CONFIG_SYS_K3_KEY), "")
 KEY=u-boot-spl-eckey.pem
+# On HS use real key or warn if not available
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/keys/custMpk.pem),)
+KEY=$(TI_SECURE_DEV_PKG)/keys/custMpk.pem
+else
+$(warning "WARNING: signing key not found. Random key will NOT work on HS hardware!")
+endif
+endif
 else
 KEY=$(patsubst "%",$(srctree)/%,$(CONFIG_SYS_K3_KEY))
 endif
@@ -65,6 +73,15 @@ ALL-y	+= tiboot3.bin
 endif
 
 ifdef CONFIG_ARM64
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+SPL_ITS := u-boot-spl-k3_HS.its
+$(SPL_ITS): FORCE
+	IS_HS=1 \
+	$(srctree)/tools/k3_fit_atf.sh \
+	$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
+
+ALL-y	+= tispl.bin_HS
+else
 SPL_ITS := u-boot-spl-k3.its
 $(SPL_ITS): FORCE
 	$(srctree)/tools/k3_fit_atf.sh \
@@ -72,7 +89,15 @@ $(SPL_ITS): FORCE
 
 ALL-y	+= tispl.bin
 endif
+endif
+
+else
 
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ALL-y	+= u-boot.img_HS
 else
 ALL-y	+= u-boot.img
 endif
+endif
+
+include $(srctree)/arch/arm/mach-k3/config_secure.mk
diff --git a/arch/arm/mach-k3/config_secure.mk b/arch/arm/mach-k3/config_secure.mk
new file mode 100644
index 0000000000..6d63c57665
--- /dev/null
+++ b/arch/arm/mach-k3/config_secure.mk
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2018 Texas Instruments, Incorporated - http://www.ti.com/
+#	Andrew F. Davis <afd@ti.com>
+
+quiet_cmd_k3secureimg = SECURE  $@
+ifneq ($(TI_SECURE_DEV_PKG),)
+ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
+cmd_k3secureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
+	$< $@ \
+	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+else
+cmd_k3secureimg = echo "WARNING:" \
+	"$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+else
+cmd_k3secureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
+	"variable must be defined for TI secure devices." \
+	"$@ was NOT secured!"; cp $< $@
+endif
+
+%.dtb_HS: %.dtb FORCE
+	$(call if_changed,k3secureimg)
+
+$(obj)/u-boot-spl-nodtb.bin_HS: $(obj)/u-boot-spl-nodtb.bin FORCE
+	$(call if_changed,k3secureimg)
+
+tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(subst ",,$(CONFIG_SPL_OF_LIST))) $(SPL_ITS) FORCE
+	$(call if_changed,mkfitimage)
+
+MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
+	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
+
+OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
+$(OF_LIST_TARGETS): dtbs
+
+u-boot-nodtb.bin_HS: u-boot-nodtb.bin FORCE
+	$(call if_changed,k3secureimg)
+
+u-boot.img_HS: u-boot-nodtb.bin_HS u-boot.img $(patsubst %.dtb,%.dtb_HS,$(OF_LIST_TARGETS)) FORCE
+	$(call if_changed,mkimage)
diff --git a/arch/arm/mach-k3/include/mach/am6_hardware.h b/arch/arm/mach-k3/include/mach/am6_hardware.h
index b5244609af..3343233aa3 100644
--- a/arch/arm/mach-k3/include/mach/am6_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am6_hardware.h
@@ -44,7 +44,4 @@
 #define CTRLMMR_LOCK_KICK1				0x0100c
 #define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
 
-/* MCU SCRATCHPAD usage */
-#define K3_BOOT_PARAM_TABLE_INDEX_VAL	CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
-
 #endif /* __ASM_ARCH_AM6_HARDWARE_H */
diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c
new file mode 100644
index 0000000000..52f49bf01f
--- /dev/null
+++ b/arch/arm/mach-k3/security.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * K3: Security functions
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <mach/spl.h>
+#include <spl.h>
+
+void board_fit_image_post_process(void **p_image, size_t *p_size)
+{
+	struct udevice *dev;
+	struct ti_sci_handle *ti_sci;
+	struct ti_sci_proc_ops *proc_ops;
+	u64 image_addr;
+	u32 image_size;
+	int ret;
+
+	/* Get handle to Device Management and Security Controller (SYSFW) */
+	ret = uclass_get_device_by_name(UCLASS_FIRMWARE, "dmsc", &dev);
+	if (ret) {
+		printf("Failed to get handle to SYSFW (%d)\n", ret);
+		hang();
+	}
+	ti_sci = (struct ti_sci_handle *)(ti_sci_get_handle_from_sysfw(dev));
+	proc_ops = &ti_sci->ops.proc_ops;
+
+	image_addr = (uintptr_t)*p_image;
+
+	debug("Authenticating image at address 0x%016llx\n", image_addr);
+
+	/* Authenticate image */
+	ret = proc_ops->proc_auth_boot_image(ti_sci, &image_addr, &image_size);
+	if (ret) {
+		printf("Authentication failed!\n");
+		hang();
+	}
+
+	/*
+	 * The image_size returned may be 0 when the authentication process has
+	 * moved the image. When this happens no further processing on the
+	 * image is needed or often even possible as it may have also been
+	 * placed behind a firewall when moved.
+	 */
+	*p_size = image_size;
+
+	/*
+	 * Output notification of successful authentication to re-assure the
+	 * user that the secure code is being processed as expected. However
+	 * suppress any such log output in case of building for SPL and booting
+	 * via YMODEM. This is done to avoid disturbing the YMODEM serial
+	 * protocol transactions.
+	 */
+	if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
+	      IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
+	      spl_boot_device() == BOOT_DEVICE_UART))
+		printf("Authentication passed\n");
+}