diff options
author | Wolfgang Denk <wd@denx.de> | 2012-07-31 22:07:42 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-31 22:07:42 +0200 |
commit | 948fa1713cce09dd958bda41eb5c97015a217f91 (patch) | |
tree | 26ccc8735233389f214af564a4bfc75a7e041668 /arch | |
parent | d978780b2e676c005460cd561f4f15b5220bdf49 (diff) | |
parent | e69e482bbf16795539af112d6a21d4ddaee35105 (diff) |
Merge branch 'master' of git://git.denx.de/u-boot-i2c
* 'master' of git://git.denx.de/u-boot-i2c:
km/common: remove printfs for i2c deblocking code
CONFIG: SMDK5250: I2C: Enable I2C
I2C: Add support for Multi channel
I2C: Modify the I2C driver for EXYNOS5
I2C: Move struct s3c24x0_i2c to a common place.
EXYNOS: PINMUX: Add pinmux support for I2C
EXYNOS5: define EXYNOS5_I2C_SPACING
EXYNOS: Add I2C base address.
EXYNOS: CLK: Add i2c clock
mx6qsabrelite: add i2c multi-bus support
imx-common: add i2c.c for bus recovery support
i.mx53: add definition for I2C3_BASE_ADDR
i.mx: iomux-v3.c: move to imx-common directory
i.mx: iomux-v3.h: move to imx-common include directory
iomux-v3: remove include of mx6x_pins.h
mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
mxc_i2c: add bus recovery support
mxc_i2c: prep work for multiple busses support
mxc_i2c: add i2c_regs argument to i2c_imx_stop
mxc_i2c: add retries
mxc_i2c: check for arbitration lost
mxc_i2c: change slave addr if conflicts with destination.
mxc_i2c: don't disable controller after every transaction
mxc_i2c: place i2c_reset code inline
mxc_i2c: place imx_start code inline
mxc_i2c: remove redundant read
mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
mxc_i2c.c: code i2c_probe as a 0 length i2c_write
mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
mxc_i2c: create i2c_init_transfer
mxc_i2c: clear i2sr before waiting for bit
mxc_i2c: create tx_byte function
mxc_i2c: remove ifdef of CONFIG_HARD_I2C
mxc_i2c: fix i2c_imx_stop
i2c: deblock i2c bus also if accessed before realocation
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/cpu/armv7/exynos/clock.c | 33 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/exynos/pinmux.c | 52 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/imx-common/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/imx-common/i2c.c | 99 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/imx-common/iomux-v3.c (renamed from arch/arm/cpu/armv7/mx6/iomux-v3.c) | 3 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx5/clock.c | 20 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 20 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/clk.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/cpu.h | 5 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-exynos/periph.h | 8 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx5/clock.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx5/imx-regs.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/clock.h | 1 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6x_pins.h | 2 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 10 | ||||
-rw-r--r-- | arch/arm/include/asm/imx-common/iomux-v3.h (renamed from arch/arm/include/asm/arch-mx6/iomux-v3.h) | 0 | ||||
-rw-r--r-- | arch/arm/include/asm/imx-common/mxc_i2c.h | 42 |
18 files changed, 289 insertions, 15 deletions
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 330bd75da9..f7829b2cc7 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -578,6 +578,29 @@ void exynos4_set_mipi_clk(void) writel(cfg, &clk->div_lcd0); } +/* + * I2C + * + * exynos5: obtaining the I2C clock + */ +static unsigned long exynos5_get_i2c_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long aclk_66, aclk_66_pre, sclk; + unsigned int ratio; + + sclk = get_pll_clk(MPLL); + + ratio = (readl(&clk->div_top1)) >> 24; + ratio &= 0x7; + aclk_66_pre = sclk / (ratio + 1); + ratio = readl(&clk->div_top0); + ratio &= 0x7; + aclk_66 = aclk_66_pre / (ratio + 1); + return aclk_66; +} + unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) @@ -594,6 +617,16 @@ unsigned long get_arm_clk(void) return exynos4_get_arm_clk(); } +unsigned long get_i2c_clk(void) +{ + if (cpu_is_exynos5()) { + return exynos5_get_i2c_clk(); + } else { + debug("I2C clock is not set for this CPU\n"); + return 0; + } +} + unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index d2b7d2cba7..d28f05557f 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -184,6 +184,48 @@ static void exynos5_sromc_config(int flags) } } +static void exynos5_i2c_config(int peripheral, int flags) +{ + + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + switch (peripheral) { + case PERIPH_ID_I2C0: + s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C1: + s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C2: + s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C3: + s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C4: + s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C5: + s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C6: + s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4)); + break; + case PERIPH_ID_I2C7: + s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3)); + break; + } +} + static int exynos5_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -201,6 +243,16 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_SROMC: exynos5_sromc_config(flags); break; + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + exynos5_i2c_config(peripheral, flags); + break; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile index e5ff375c12..bf36be5767 100644 --- a/arch/arm/cpu/armv7/imx-common/Makefile +++ b/arch/arm/cpu/armv7/imx-common/Makefile @@ -27,7 +27,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)libimx-common.o -COBJS = timer.o cpu.o speed.o +COBJS-y = iomux-v3.o timer.o cpu.o speed.o +COBJS-$(CONFIG_I2C_MXC) += i2c.o +COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/imx-common/i2c.c b/arch/arm/cpu/armv7/imx-common/i2c.c new file mode 100644 index 0000000000..da2b26f43f --- /dev/null +++ b/arch/arm/cpu/armv7/imx-common/i2c.c @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/mxc_i2c.h> +#include <watchdog.h> + +static int force_idle_bus(void *priv) +{ + int i; + int sda, scl; + ulong elapsed, start_time; + struct i2c_pads_info *p = (struct i2c_pads_info *)priv; + int ret = 0; + + gpio_direction_input(p->sda.gp); + gpio_direction_input(p->scl.gp); + + imx_iomux_v3_setup_pad(p->sda.gpio_mode); + imx_iomux_v3_setup_pad(p->scl.gpio_mode); + + sda = gpio_get_value(p->sda.gp); + scl = gpio_get_value(p->scl.gp); + if ((sda & scl) == 1) + goto exit; /* Bus is idle already */ + + printf("%s: sda=%d scl=%d sda.gp=0x%x scl.gp=0x%x\n", __func__, + sda, scl, p->sda.gp, p->scl.gp); + /* Send high and low on the SCL line */ + for (i = 0; i < 9; i++) { + gpio_direction_output(p->scl.gp, 0); + udelay(50); + gpio_direction_input(p->scl.gp); + udelay(50); + } + start_time = get_timer(0); + for (;;) { + sda = gpio_get_value(p->sda.gp); + scl = gpio_get_value(p->scl.gp); + if ((sda & scl) == 1) + break; + WATCHDOG_RESET(); + elapsed = get_timer(start_time); + if (elapsed > (CONFIG_SYS_HZ / 5)) { /* .2 seconds */ + ret = -EBUSY; + printf("%s: failed to clear bus, sda=%d scl=%d\n", + __func__, sda, scl); + break; + } + } +exit: + imx_iomux_v3_setup_pad(p->sda.i2c_mode); + imx_iomux_v3_setup_pad(p->scl.i2c_mode); + return ret; +} + +static void * const i2c_bases[] = { + (void *)I2C1_BASE_ADDR, + (void *)I2C2_BASE_ADDR, +#ifdef I2C3_BASE_ADDR + (void *)I2C3_BASE_ADDR, +#endif +}; + +/* i2c_index can be from 0 - 2 */ +void setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p) +{ + if (i2c_index >= ARRAY_SIZE(i2c_bases)) + return; + /* Enable i2c clock */ + enable_i2c_clk(1, i2c_index); + /* Make sure bus is idle */ + force_idle_bus(p); + bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr, + force_idle_bus, p); +} diff --git a/arch/arm/cpu/armv7/mx6/iomux-v3.c b/arch/arm/cpu/armv7/imx-common/iomux-v3.c index 8785532163..da093fbe14 100644 --- a/arch/arm/cpu/armv7/mx6/iomux-v3.c +++ b/arch/arm/cpu/armv7/imx-common/iomux-v3.c @@ -23,8 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx6x_pins.h> -#include <asm/arch/iomux-v3.h> +#include <asm/imx-common/iomux-v3.h> static void *base = (void *)IOMUXC_BASE_ADDR; diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 64862b31f1..c67c3cfc48 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -117,6 +117,26 @@ void enable_usboh3_clk(unsigned char enable) writel(reg, &mxc_ccm->CCGR2); } +#ifdef CONFIG_I2C_MXC +/* i2c_num can be from 0 - 2 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 reg; + u32 mask; + + if (i2c_num > 2) + return -EINVAL; + mask = MXC_CCM_CCGR_CG_MASK << ((i2c_num + 9) << 1); + reg = __raw_readl(&mxc_ccm->CCGR1); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &mxc_ccm->CCGR1); + return 0; +} +#endif + void set_usb_phy1_clk(void) { unsigned int reg; diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index b0da028da6..cbce411cca 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = soc.o clock.o iomux-v3.o +COBJS = soc.o clock.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 52d5dc4d90..fddb3733ae 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -50,6 +50,26 @@ void enable_usboh3_clk(unsigned char enable) } +#ifdef CONFIG_I2C_MXC +/* i2c_num can be from 0 - 2 */ +int enable_i2c_clk(unsigned char enable, unsigned i2c_num) +{ + u32 reg; + u32 mask; + + if (i2c_num > 2) + return -EINVAL; + mask = MXC_CCM_CCGR_CG_MASK << ((i2c_num + 3) << 1); + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= mask; + else + reg &= ~mask; + __raw_writel(reg, &imx_ccm->CCGR2); + return 0; +} +#endif + static u32 decode_pll(enum pll_clocks pll, u32 infreq) { u32 div; diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 637fb4bd14..72dc655ec1 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -30,6 +30,7 @@ unsigned long get_pll_clk(int pllreg); unsigned long get_arm_clk(void); +unsigned long get_i2c_clk(void); unsigned long get_pwm_clk(void); unsigned long get_uart_clk(int dev_index); void set_mmc_clk(int dev_index, unsigned int div); diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 0c341d4318..0e6ea87079 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -49,6 +49,7 @@ #define EXYNOS4_USB_HOST_EHCI_BASE 0x12580000 #define EXYNOS4_USBPHY_BASE 0x125B0000 #define EXYNOS4_UART_BASE 0x13800000 +#define EXYNOS4_I2C_BASE 0x13860000 #define EXYNOS4_ADC_BASE 0x13910000 #define EXYNOS4_PWMTIMER_BASE 0x139D0000 #define EXYNOS4_MODEM_BASE 0x13A00000 @@ -57,6 +58,8 @@ #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ +#define EXYNOS5_I2C_SPACING 0x10000 + #define EXYNOS5_GPIO_PART4_BASE 0x03860000 #define EXYNOS5_PRO_ID 0x10000000 #define EXYNOS5_CLOCK_BASE 0x10010000 @@ -76,6 +79,7 @@ #define EXYNOS5_MMC_BASE 0x12200000 #define EXYNOS5_SROMC_BASE 0x12250000 #define EXYNOS5_UART_BASE 0x12C00000 +#define EXYNOS5_I2C_BASE 0x12C60000 #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 @@ -148,6 +152,7 @@ SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) +SAMSUNG_BASE(i2c, I2C_BASE) SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE) SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 5db25aa88a..b861d7d584 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -30,6 +30,14 @@ * */ enum periph_id { + PERIPH_ID_I2C0, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, PERIPH_ID_SDMMC0, PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 35ee8155de..36ea03082f 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -49,5 +49,6 @@ void enable_usb_phy2_clk(unsigned char enable); void set_usboh3_clk(void); void enable_usboh3_clk(unsigned char enable); void mxc_set_sata_internal_clock(void); +int enable_i2c_clk(unsigned char enable, unsigned i2c_num); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 8117f4f91a..7f66b61b3c 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -96,6 +96,7 @@ #define GPIO5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000DC000) #define GPIO6_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E0000) #define GPIO7_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E4000) +#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x000EC000) #define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000F0000) #endif /* diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index b91d8bf450..c55c18d51b 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -48,5 +48,6 @@ u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); +int enable_i2c_clk(unsigned char enable, unsigned i2c_num); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h index cf9103c3d2..3d66d64d20 100644 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6x_pins.h @@ -22,7 +22,7 @@ #ifndef __ASM_ARCH_MX6_MX6X_PINS_H__ #define __ASM_ARCH_MX6_MX6X_PINS_H__ -#include <asm/arch/iomux-v3.h> +#include <asm/imx-common/iomux-v3.h> /* Use to set PAD control */ #define PAD_CTL_HYS (1 << 16) diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index ca978c9bbc..0f75c311f5 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -343,16 +343,6 @@ struct s3c24x0_watchdog { u32 wtcnt; }; - -/* IIC (see manual chapter 20) */ -struct s3c24x0_i2c { - u32 iiccon; - u32 iicstat; - u32 iicadd; - u32 iicds; -}; - - /* IIS (see manual chapter 21) */ struct s3c24x0_i2s { #ifdef __BIG_ENDIAN diff --git a/arch/arm/include/asm/arch-mx6/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 788b413219..788b413219 100644 --- a/arch/arm/include/asm/arch-mx6/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h new file mode 100644 index 0000000000..9a5187d464 --- /dev/null +++ b/arch/arm/include/asm/imx-common/mxc_i2c.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MXC_MXC_I2C_H__ +#define __ASM_ARCH_MXC_MXC_I2C_H__ +#include <asm/imx-common/iomux-v3.h> + +struct i2c_pin_ctrl { + iomux_v3_cfg_t i2c_mode; + iomux_v3_cfg_t gpio_mode; + unsigned char gp; + unsigned char spare; +}; + +struct i2c_pads_info { + struct i2c_pin_ctrl scl; + struct i2c_pin_ctrl sda; +}; + +void setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p); +void bus_i2c_init(void *base, int speed, int slave_addr, + int (*idle_bus_fn)(void *p), void *p); +int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf, + int len); +int bus_i2c_write(void *base, uchar chip, uint addr, int alen, + const uchar *buf, int len); +#endif |