Merge tag 'u-boot-rockchip-20200722' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

- New rk3326 board: Hardkernel Odroid Go2;
- Update board config and dts for RockPI 4/N8/N10;
- Update led boot on support for roc-rk3399-pc;
- Enable SPI Flash suppor for rk3328 rock64 board;
- Update rockchip pcie phy to use generic framework;

30 files changed, 1379 insertions, 197 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cee10f533f..5726156a2d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -71,7 +71,8 @@ dtb-$(CONFIG_MACH_S700) += \
 
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
 	px30-evb.dtb \
-	px30-firefly.dtb
+	px30-firefly.dtb \
+	rk3326-odroid-go2.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3036) += \
 	rk3036-sdk.dtb
@@ -135,7 +136,9 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-puma-haikou.dtb \
 	rk3399-roc-pc.dtb \
 	rk3399-roc-pc-mezzanine.dtb \
-	rk3399-rock-pi-4.dtb \
+	rk3399-rock-pi-4a.dtb \
+	rk3399-rock-pi-4b.dtb \
+	rk3399-rock-pi-4c.dtb \
 	rk3399-rock960.dtb \
 	rk3399-rockpro64.dtb \
 	rk3399pro-rock-pi-n10.dtb
diff --git a/arch/arm/dts/rk3288-rock-pi-n8.dts b/arch/arm/dts/rk3288-rock-pi-n8.dts
index c8637a50c1..c9894a60e7 100644
--- a/arch/arm/dts/rk3288-rock-pi-n8.dts
+++ b/arch/arm/dts/rk3288-rock-pi-n8.dts
@@ -7,8 +7,8 @@
 
 /dts-v1/;
 #include "rk3288.dtsi"
-#include "rk3288-vmarc-som.dtsi"
 #include <rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3288-vmarc-som.dtsi"
 
 / {
 	model = "Radxa ROCK Pi N8";
diff --git a/arch/arm/dts/rk3288-vmarc-som.dtsi b/arch/arm/dts/rk3288-vmarc-som.dtsi
index 3cffe61cdf..717cb3dc81 100644
--- a/arch/arm/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/dts/rk3288-vmarc-som.dtsi
@@ -7,35 +7,17 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/pwm/pwm.h>
 
 / {
 	compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
 
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-		#clock-cells = <0>;
-	};
-
 	vccio_flash: vccio-flash-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vccio_flash";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <150>;
 		vin-supply = <&vcc_io>;
 	};
-
-	vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 };
 
 &emmc {
@@ -45,23 +27,21 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_flash>;
 	status = "okay";
 };
 
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	phy-mode = "rgmii";
 	phy-supply = <&vcc_io>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	max-speed = <1000>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
 };
 
 &i2c0 {
@@ -80,37 +60,37 @@
 		#clock-cells = <1>;
 		clock-output-names = "rk808-clkout1", "rk808-clkout2";
 
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
 		vcc8-supply = <&vcc_io>;
 		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_sys>;
-		vcc11-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
 		vcc12-supply = <&vcc_io>;
 		vddio-supply = <&vcc_io>;
 
 		regulators {
 			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1400000>;
-				regulator-name = "vdd_arm";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
 				regulator-ramp-delay = <6000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -118,20 +98,20 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_ddr";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
 			};
 
 			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -139,22 +119,22 @@
 			};
 
 			vcc_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vcca_codec: LDO_REG2 {
+				regulator-name = "vcca_codec";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -162,11 +142,11 @@
 			};
 
 			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1000000>;
@@ -174,22 +154,22 @@
 			};
 
 			vcc_wl: LDO_REG4 {
+				regulator-name = "vcc_wl";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_wl";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
 			};
 
 			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
@@ -197,22 +177,22 @@
 			};
 
 			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <1800000>;
@@ -220,29 +200,29 @@
 			};
 
 			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_sd";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
 			};
 
 			vcc_lcd: SWITCH_REG2 {
+				regulator-name = "vcc_lcd";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_lcd";
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -251,6 +231,10 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+};
+
 &pinctrl {
 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 		drive-strength = <8>;
@@ -277,13 +261,53 @@
 		};
 
 		sdmmc_clk: sdmmc-clk {
-			rockchip,pins =
-				<6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
 		};
 
 		sdmmc_cmd: sdmmc-cmd {
-			rockchip,pins =
-				<6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
 		};
 	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
 };
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index 866fc08215..22bb06cec5 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -431,7 +431,16 @@
 		status = "disabled";
 	};
 
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+	/* NOTE: doesn't work on RK3288, but fixed on RK3288W */
+	usb_host0_ohci: usb@ff520000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff520000 0x0 0x100>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
 
 	usb_host1: usb@ff540000 {
 		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
@@ -1085,6 +1094,12 @@
 			#interrupt-cells = <2>;
 		};
 
+		hdmi {
+			hdmi_cec_c0: hdmi-cec-c0 {
+				rockchip,pins = <7 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
 		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
new file mode 100644
index 0000000000..00767d2abd
--- /dev/null
+++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = &sdmmc;
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&dmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio0 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};
+
+&pmucru {
+	u-boot,dm-pre-reloc;
+};
+
+&pmugrf {
+	u-boot,dm-pre-reloc;
+};
+
+&saradc {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+
+	/* mmc to sram can't do dma, prevent aborts transferring TF-A parts */
+	u-boot,spl-fifo-mode;
+};
+
+&uart1 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	clock-frequency = <24000000>;
+	u-boot,dm-pre-reloc;
+};
+
+&xin24m {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts
new file mode 100644
index 0000000000..8cd4688c49
--- /dev/null
+++ b/arch/arm/dts/rk3326-odroid-go2.dts
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-range = <172 772>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-range = <278 815>;
+			abs-fuzz = <10>;
+			abs-flat = <10>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		/*
+		 *      *** ODROIDGO2-Advance Switch layout ***
+		 * |------------------------------------------------|
+		 * | sw15                                      sw16 |
+		 * |------------------------------------------------|
+		 * |     sw1      |-------------------|      sw8    |
+		 * |  sw3   sw4   |                   |   sw7   sw5 |
+		 * |     sw2      |    LCD Display    |      sw6    |
+		 * |              |                   |             |
+		 * |              |-------------------|             |
+		 * |         sw9 sw10   sw11 sw12   sw13 sw14       |
+		 * |------------------------------------------------|
+		 */
+
+		sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		blue_led: led-0 {
+			label = "blue:heartbeat";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rk817-codec";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
+		simple-audio-card,codec-hp-det = <1>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817_codec>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vccsys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
+		<&cru PLL_CPLL>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>,
+		<17000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "elida,kd35t133";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default", "pmic-sleep",
+				"pmic-power-off", "pmic-reset";
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
+		pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
+		pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+
+		pinctrl_rk8xx: pinctrl_rk8xx {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			rk817_ts_gpio1: rk817_ts_gpio1 {
+				pins = "gpio_ts";
+				function = "pin_fun1";
+				/* output-low; */
+				/* input-enable; */
+			};
+
+			rk817_gt_gpio2: rk817_gt_gpio2 {
+				pins = "gpio_gt";
+				function = "pin_fun1";
+			};
+
+			rk817_pin_ts: rk817_pin_ts {
+				pins = "gpio_ts";
+				function = "pin_fun0";
+			};
+
+			rk817_pin_gt: rk817_pin_gt {
+				pins = "gpio_gt";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_null: rk817_slppin_null {
+				pins = "gpio_slp";
+				function = "pin_fun0";
+			};
+
+			rk817_slppin_slp: rk817_slppin_slp {
+				pins = "gpio_slp";
+				function = "pin_fun1";
+			};
+
+			rk817_slppin_pwrdn: rk817_slppin_pwrdn {
+				pins = "gpio_slp";
+				function = "pin_fun2";
+			};
+
+			rk817_slppin_rst: rk817_slppin_rst {
+				pins = "gpio_slp";
+				function = "pin_fun3";
+			};
+		};
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-name = "vcc_cam";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+
+		battery {
+			compatible = "rk817,battery";
+			ocv_table = <3500 3625 3685 3697 3718 3735 3748
+			3760 3774 3788 3802 3816 3834 3853
+			3877 3908 3946 3975 4018 4071 4106>;
+
+			/* KPL605475 Battery Spec */
+			/*
+				Capacity : 3.7V 3000mA
+				Normal Voltage = 3.7V
+				Cut-Off Voltage : 3.1V
+				Internal Impedance : 180 mOhm
+				Charging Voltage : 4.2V
+				Charging Voltage Max : 4.25V
+				Sample resister : 10 mohm
+			*/
+			design_capacity = <3000>;
+			design_qmax = <3000>;
+			bat_res = <180>;
+			sleep_enter_current = <300>;
+			sleep_exit_current = <300>;
+			sleep_filter_current = <100>;
+			power_off_thresd = <3500>;
+			zero_algorithm_vol = <3700>;
+			max_soc_offset = <60>;
+			monitor_sec = <5>;
+			virtual_power = <0>;
+			sample_res = <10>;
+		};
+
+		charger {
+			compatible = "rk817,charger";
+			min_input_voltage = <4500>;
+			max_input_current = <1500>;
+			max_chrg_current = <2000>;
+			max_chrg_voltage = <4200>;
+			chrg_term_mode = <0>;
+			chrg_finish_cur = <300>;
+			virtual_power = <0>;
+			sample_res = <10>;
+
+			/* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
+			dc_det_gpio  = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+
+			extcon = <&u2phy>;
+		};
+
+		rk817_codec: codec {
+			#sound-dai-cells = <0>;
+			compatible = "rockchip,rk817-codec";
+			clocks = <&cru SCLK_I2S1_OUT>;
+			clock-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_2ch_mclk>;
+			hp-volume = <20>;
+			spk-volume = <3>;
+			status = "okay";
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3326.dtsi b/arch/arm/dts/rk3326.dtsi
new file mode 100644
index 0000000000..2ba6da1251
--- /dev/null
+++ b/arch/arm/dts/rk3326.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;
diff --git a/arch/arm/dts/rk3328-rock64-u-boot.dtsi b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
index f076075076..7340ef95f1 100644
--- a/arch/arm/dts/rk3328-rock64-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-rock64-u-boot.dtsi
@@ -46,3 +46,9 @@
 &vcc_sd {
 	u-boot,dm-spl;
 };
+
+&spi0 {
+	spi_flash: spiflash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/arch/arm/dts/rk3328-u-boot.dtsi b/arch/arm/dts/rk3328-u-boot.dtsi
index c69e13e11e..1633558264 100644
--- a/arch/arm/dts/rk3328-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-u-boot.dtsi
@@ -7,6 +7,7 @@
 	aliases {
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
+		spi0 = &spi0;
 	};
 
 	chosen {
@@ -66,3 +67,7 @@
 &usb20_otg {
 	hnp-srp-disable;
 };
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4.dts b/arch/arm/dts/rk3399-rock-pi-4.dtsi
index 3923ec01ef..1c55a4645b 100644
--- a/arch/arm/dts/rk3399-rock-pi-4.dts
+++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi
@@ -11,9 +11,6 @@
 #include "rk3399-opp.dtsi"
 
 / {
-	model = "Radxa ROCK Pi 4";
-	compatible = "radxa,rockpi4", "rockchip,rk3399";
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
@@ -587,17 +584,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		compatible = "brcm,bcm4329-fmac";
-		reg = <1>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
-		interrupt-names = "host-wake";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_host_wake_l>;
-	};
 };
 
 &sdmmc {
@@ -666,18 +652,6 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
-	};
 };
 
 &uart2 {
diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts
new file mode 100644
index 0000000000..d96dd3ebd3
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4a.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi
new file mode 100644
index 0000000000..85ee5770ad
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4b-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rock-pi-4b.dts b/arch/arm/dts/rk3399-rock-pi-4b.dts
new file mode 100644
index 0000000000..4ca970acac
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4b.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
diff --git a/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi
new file mode 100644
index 0000000000..85ee5770ad
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4c-u-boot.dtsi
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-rock-pi-4-u-boot.dtsi"
diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts
new file mode 100644
index 0000000000..9d07ebd1ec
--- /dev/null
+++ b/arch/arm/dts/rk3399-rock-pi-4c.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4C";
+	compatible = "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&vcc5v0_host {
+	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi b/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
index 946a0230db..7c66e1145a 100644
--- a/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
+++ b/arch/arm/dts/rk3399pro-rock-pi-n10-u-boot.dtsi
@@ -5,3 +5,9 @@
 
 #include "rk3399pro-u-boot.dtsi"
 #include "rk3399-sdram-lpddr3-4GB-1600.dtsi"
+
+/ {
+	chosen {
+		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+	};
+};
diff --git a/arch/arm/dts/rk3399pro-rock-pi-n10.dts b/arch/arm/dts/rk3399pro-rock-pi-n10.dts
index 6ac2d4d721..bf026786fa 100644
--- a/arch/arm/dts/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm/dts/rk3399pro-rock-pi-n10.dts
@@ -8,11 +8,15 @@
 /dts-v1/;
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
-#include "rk3399pro-vmarc-som.dtsi"
 #include <rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
 
 / {
 	model = "Radxa ROCK Pi N10";
 	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
 		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
 };
diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
index 6fd17e8a81..5d087be04a 100644
--- a/arch/arm/dts/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
@@ -12,30 +12,16 @@
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc3v3_pcie: vcc-pcie-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -61,23 +47,20 @@
 
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
 	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
 };
 
 &i2c0 {
 	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <180>;
 	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
 	status = "okay";
 
 	rk809: pmic@20 {
@@ -171,7 +154,8 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <900000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
 				};
 			};
 
@@ -206,7 +190,8 @@
 				regulator-min-microvolt = <1850000>;
 				regulator-max-microvolt = <1850000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
 				};
 			};
 
@@ -297,11 +282,88 @@
 	};
 };
 
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcca_1v8>;
-	sdmmc-supply = <&vccio_sd>;
 	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =	<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -322,17 +384,74 @@
 	max-frequency = <150000000>;
 };
 
-&tsadc {
+&tcphy0 {
 	status = "okay";
+};
+
+&tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
 };
 
-&pinctrl {
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC2 0 &pcfg_pull_up>;
-		};
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
 	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
 };
diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
index 3e54f38f0a..26b53eac47 100644
--- a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -8,36 +8,66 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	chosen {
-		stdout-path = "serial2:1500000n8";
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
 	};
-};
 
-&gmac {
-	status = "okay";
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vbus_host: vbus-host {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_en_oc>;
+		regulator-name = "vbus_host"; /* HOST-5V */
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_en_oc>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
-&i2c1 {
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
 	status = "okay";
-	i2c-scl-rising-time-ns = <140>;
-	i2c-scl-falling-time-ns = <30>;
 };
 
-&i2c2 {
+&hdmi {
 	status = "okay";
-	clock-frequency = <400000>;
-
-	hym8563: hym8563@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-	};
 };
 
 &pwm0 {
@@ -69,11 +99,18 @@
 	status = "okay";
 };
 
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins =
-				<4 RK_PD6 0 &pcfg_pull_up>;
-		};
-	};
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
 };
diff --git a/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h b/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h
new file mode 100644
index 0000000000..7445e64b8c
--- /dev/null
+++ b/arch/arm/include/asm/arch-rockchip/cpu_rk3288.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+  */
+/*
+ * Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef __ASM_ARCH_CPU_RK3288_H
+#define __ASM_ARCH_CPU_RK3288_H
+
+#include <asm/io.h>
+
+#define ROCKCHIP_CPU_MASK       0xffff0000
+#define ROCKCHIP_CPU_RK3288     0x32880000
+
+#define ROCKCHIP_SOC_MASK	(ROCKCHIP_CPU_MASK | 0xff)
+#define ROCKCHIP_SOC_RK3288     (ROCKCHIP_CPU_RK3288 | 0x00)
+#define ROCKCHIP_SOC_RK3288W    (ROCKCHIP_CPU_RK3288 | 0x01)
+
+#define RK3288_HDMI_PHYS	0xff980000
+#define HDMI_CONFIG0_ID		0x4
+#define RK3288W_HDMI_REVID	0x1a
+
+static inline int rockchip_soc_id(void)
+{
+	u8 reg;
+
+#if defined(CONFIG_ROCKCHIP_RK3288)
+	reg = readb(RK3288_HDMI_PHYS + HDMI_CONFIG0_ID);
+	if (reg == RK3288W_HDMI_REVID)
+		return ROCKCHIP_SOC_RK3288W;
+	else
+		return ROCKCHIP_SOC_RK3288;
+#else
+	return 0;
+#endif
+}
+
+#define ROCKCHIP_SOC(id, ID) \
+static inline bool soc_is_##id(void) \
+{ \
+	int soc_id = rockchip_soc_id(); \
+	if (soc_id) \
+		return ((soc_id & ROCKCHIP_SOC_MASK) == ROCKCHIP_SOC_ ##ID); \
+	return false; \
+}
+
+ROCKCHIP_SOC(rk3288, RK3288)
+ROCKCHIP_SOC(rk3288w, RK3288W)
+
+#endif /* __ASM_ARCH_CPU_RK3288_H */
diff --git a/arch/arm/include/asm/arch-rockchip/cru.h b/arch/arm/include/asm/arch-rockchip/cru.h
index 5eb17f9d55..13ea4aba8e 100644
--- a/arch/arm/include/asm/arch-rockchip/cru.h
+++ b/arch/arm/include/asm/arch-rockchip/cru.h
@@ -26,9 +26,10 @@ enum {
 	SND_GLB_TSADC_RST_ST	= BIT(3),
 	FST_GLB_WDT_RST_ST	= BIT(4),
 	SND_GLB_WDT_RST_ST	= BIT(5),
-	GLB_RST_ST_MASK		= GENMASK(5, 0),
 };
 
 #define MHz		1000000
 
+char *get_reset_cause(void);
+
 #endif /* _ROCKCHIP_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-rockchip/sdram_common.h b/arch/arm/include/asm/arch-rockchip/sdram_common.h
index 36d31156be..5efa6e9445 100644
--- a/arch/arm/include/asm/arch-rockchip/sdram_common.h
+++ b/arch/arm/include/asm/arch-rockchip/sdram_common.h
@@ -114,25 +114,10 @@ struct sdram_base_params {
 #define SYS_REG_ENC_CS1_COL(n, ch)	(((n) - 9) << (0 + 2 * (ch)))
 #define SYS_REG_DEC_CS1_COL(n, ch)	(9 + (((n) >> (0 + 2 * (ch))) & 0x3))
 
-#if !defined(CONFIG_RAM_ROCKCHIP_DEBUG)
-inline void sdram_print_dram_type(unsigned char dramtype)
-{
-}
-
-inline void sdram_print_ddr_info(struct sdram_cap_info *cap_info,
-				 struct sdram_base_params *base)
-{
-}
-
-inline void sdram_print_stride(unsigned int stride)
-{
-}
-#else
 void sdram_print_dram_type(unsigned char dramtype);
 void sdram_print_ddr_info(struct sdram_cap_info *cap_info,
 			  struct sdram_base_params *base);
 void sdram_print_stride(unsigned int stride);
-#endif /* CONFIG_RAM_ROCKCHIP_DEBUG */
 
 void sdram_org_config(struct sdram_cap_info *cap_info,
 		      struct sdram_base_params *base,
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index e2b6326584..fcab1d5cee 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -99,6 +99,7 @@ config ROCKCHIP_RK322X
 config ROCKCHIP_RK3288
 	bool "Support Rockchip RK3288"
 	select CPU_V7A
+	select OF_BOARD_SETUP
 	select SUPPORT_SPL
 	select SPL
 	select SUPPORT_TPL
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 5b38526fe0..121f23a563 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -22,11 +22,14 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 # we can have the preprocessor correctly recognise both 0x0 and 0
 # meaning "turn it off".
 obj-y += boot_mode.o
-obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
 obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
 obj-$(CONFIG_MISC_INIT_R) += misc.o
 endif
 
+ifeq ($(CONFIG_TPL_BUILD),)
+obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
+endif
+
 obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
 
 obj-$(CONFIG_ROCKCHIP_PX30) += px30/
diff --git a/arch/arm/mach-rockchip/cpu-info.c b/arch/arm/mach-rockchip/cpu-info.c
index 21ca9dedce..d0f030109f 100644
--- a/arch/arm/mach-rockchip/cpu-info.c
+++ b/arch/arm/mach-rockchip/cpu-info.c
@@ -13,7 +13,7 @@
 #include <asm/arch-rockchip/hardware.h>
 #include <linux/err.h>
 
-static char *get_reset_cause(void)
+char *get_reset_cause(void)
 {
 	struct rockchip_cru *cru = rockchip_get_cru();
 	char *cause = NULL;
@@ -41,27 +41,25 @@ static char *get_reset_cause(void)
 		cause = "unknown reset";
 	}
 
-	/**
-	 * reset_reason env is used by rk3288, due to special use case
-	 * to figure it the boot behavior. so keep this as it is.
-	 */
-	env_set("reset_reason", cause);
-
-	/*
-	 * Clear glb_rst_st, so we can determine the last reset cause
-	 * for following resets.
-	 */
-	rk_clrreg(&cru->glb_rst_st, GLB_RST_ST_MASK);
-
 	return cause;
 }
 
+#if CONFIG_IS_ENABLED(DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
+	char *cause = get_reset_cause();
+
 	printf("SoC: Rockchip %s\n", CONFIG_SYS_SOC);
-	printf("Reset cause: %s\n", get_reset_cause());
+	printf("Reset cause: %s\n", cause);
+
+	/**
+	 * reset_reason env is used by rk3288, due to special use case
+	 * to figure it the boot behavior. so keep this as it is.
+	 */
+	env_set("reset_reason", cause);
 
 	/* TODO print operating temparature and clock */
 
 	return 0;
 }
+#endif
diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig
index 9f3ad4f623..f5373c6f9f 100644
--- a/arch/arm/mach-rockchip/px30/Kconfig
+++ b/arch/arm/mach-rockchip/px30/Kconfig
@@ -3,6 +3,9 @@ if ROCKCHIP_PX30
 config TARGET_EVB_PX30
 	bool "EVB_PX30"
 
+config TARGET_ODROID_GO2
+	bool "ODROID_GO2"
+
 config ROCKCHIP_BOOT_MODE_REG
 	default 0xff010200
 
@@ -36,6 +39,7 @@ config DEBUG_UART_CHANNEL
 	  For using the UART for early debugging the route to use needs
 	  to be declared (0 or 1).
 
+source "board/hardkernel/odroid_go2/Kconfig"
 source "board/rockchip/evb_px30/Kconfig"
 
 endif
diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c
index 804abe8a1b..1a4ecdf625 100644
--- a/arch/arm/mach-rockchip/rk3288/rk3288.c
+++ b/arch/arm/mach-rockchip/rk3288/rk3288.c
@@ -13,6 +13,7 @@
 #include <asm/io.h>
 #include <asm/arch-rockchip/bootrom.h>
 #include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/cpu_rk3288.h>
 #include <asm/arch-rockchip/cru.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/grf_rk3288.h>
@@ -115,6 +116,35 @@ int rk_board_late_init(void)
 	return rk3288_board_late_init();
 }
 
+static int ft_rk3288w_setup(void *blob)
+{
+	const char *path;
+	int offs, ret;
+
+	path = "/clock-controller@ff760000";
+	offs = fdt_path_offset(blob, path);
+	if (offs < 0) {
+		debug("failed to found fdt path %s\n", path);
+		return offs;
+	}
+
+	ret = fdt_setprop_string(blob, offs, "compatible", "rockchip,rk3288w-cru");
+	if (ret) {
+		printf("failed to set rk3288w-cru compatible (ret=%d)\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	if (soc_is_rk3288w())
+		return ft_rk3288w_setup(blob);
+
+	return 0;
+}
+
 static int do_clock(struct cmd_tbl *cmdtp, int flag, int argc,
 		    char *const argv[])
 {
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index 4fda93b152..c643483971 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -241,8 +241,14 @@ static void rk3399_force_power_on_reset(void)
 }
 #endif
 
+void __weak led_setup(void)
+{
+}
+
 void spl_board_init(void)
 {
+	led_setup();
+
 #if defined(SPL_GPIO_SUPPORT)
 	struct rockchip_cru *cru = rockchip_get_cru();
 
diff --git a/arch/arm/mach-rockchip/sdram.c b/arch/arm/mach-rockchip/sdram.c
index 24fe6cc8f0..4c637b7767 100644
--- a/arch/arm/mach-rockchip/sdram.c
+++ b/arch/arm/mach-rockchip/sdram.c
@@ -56,16 +56,14 @@ int dram_init_banksize(void)
 					- CONFIG_SYS_SDRAM_BASE;
 		gd->bd->bi_dram[1].start = tos_parameter->tee_mem.phy_addr +
 					tos_parameter->tee_mem.size;
-		gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
-					+ top - gd->bd->bi_dram[1].start;
+		gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start;
 	} else {
 		gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 		gd->bd->bi_dram[0].size = 0x8400000;
 		/* Reserve 32M for OPTEE with TA */
 		gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE
 					+ gd->bd->bi_dram[0].size + 0x2000000;
-		gd->bd->bi_dram[1].size = gd->bd->bi_dram[0].start
-					+ top - gd->bd->bi_dram[1].start;
+		gd->bd->bi_dram[1].size = top - gd->bd->bi_dram[1].start;
 	}
 #else
 	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
diff --git a/arch/arm/mach-rockchip/tpl.c b/arch/arm/mach-rockchip/tpl.c
index 88f80b05a9..cc908e1b0e 100644
--- a/arch/arm/mach-rockchip/tpl.c
+++ b/arch/arm/mach-rockchip/tpl.c
@@ -43,18 +43,11 @@ __weak void rockchip_stimer_init(void)
 	       TIMER_CONTROL_REG);
 }
 
-__weak int board_early_init_f(void)
-{
-	return 0;
-}
-
 void board_init_f(ulong dummy)
 {
 	struct udevice *dev;
 	int ret;
 
-	board_early_init_f();
-
 #if defined(CONFIG_DEBUG_UART) && defined(CONFIG_TPL_SERIAL_SUPPORT)
 	/*
 	 * Debug UART can be used from here if required: