Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

32 files changed, 751 insertions, 516 deletions

diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index 42387b49e0..663510987d 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -126,72 +126,6 @@ int checkcpu(void)
 	return 0;
 }
 
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM.  The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM.  To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want.  Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array.  Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile fsl_lbus_t *lbus = &immap->lbus;
-	volatile uchar *dummy = NULL;
-	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
-	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
-	uint i;
-
-	/* Scan all the banks to determine the base address of the device */
-	for (i = 0; i < 8; i++) {
-		if ((lbus->bank[i].br & BR_MSEL) == msel) {
-			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
-			break;
-		}
-	}
-
-	if (!dummy) {
-		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
-		hang();
-	}
-
-	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
-	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
-	for (i = 0; i < size; i++) {
-		lbus->mdr = table[i];
-		__asm__ __volatile__ ("sync");
-		*dummy = 0;	/* Write the value to memory and increment MAD */
-		__asm__ __volatile__ ("sync");
-		while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
-	}
-
-	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
-	*mxmr &= 0xCFFFFFC0;
-}
-
-
 int
 do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index f3b67ae2b9..83cba93605 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im)
 	/* LCRR - Clock Ratio Register (10.3.1.16)
 	 * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
 	 */
-	clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
-	__raw_readl(&im->lbus.lcrr);
+	clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val);
+	__raw_readl(&im->im_lbc.lcrr);
 	isync();
 
 	/* Enable Time Base & Decrementer ( so we will have udelay() )*/
@@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im)
 	/* Config QE ioports */
 	config_qe_ioports();
 #endif
+	/* Set up preliminary BR/OR regs */
+	init_early_memctl_regs();
 
-	/*
-	 * Memory Controller:
-	 */
-
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_BR0_PRELIM)  \
-	&& defined(CONFIG_SYS_OR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
-	&& defined(CONFIG_SYS_LBLAWAR0_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
+	/* Local Access window setup */
+#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
 #else
-#error	CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
+#error	CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
 #endif
 
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
-	im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
 	im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
 	im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
-	im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 	im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
 	im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
-	im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
 	im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
 	im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
-	im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
 	im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
 	im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
-	im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
 	im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
 	im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
-	im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
 	im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
 	im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
 #endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
-	im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
 #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
 	im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
 	im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c
index 38e141a828..d1648b7810 100644
--- a/arch/powerpc/cpu/mpc83xx/nand_init.c
+++ b/arch/powerpc/cpu/mpc83xx/nand_init.c
@@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im)
 	&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
 	&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
-	im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
-	im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
 	im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
 	im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
 #else
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index d04b192599..93e9f1c3f9 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -393,7 +393,7 @@ int get_clocks(void)
 
 	lbiu_clk = csb_clk *
 	           (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
+	lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
 	case 4:
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index f064fee26b..4ee0e9af8c 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -32,6 +32,7 @@ START	= start.o resetvec.o
 SOBJS-$(CONFIG_MP)	+= release.o
 SOBJS	= $(SOBJS-y)
 
+COBJS-$(CONFIG_CMD_ERRATA) += cmd_errata.o
 COBJS-$(CONFIG_CPM2)	+= commproc.o
 
 # supports ddr1
@@ -63,6 +64,7 @@ COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_MP)	+= mp.o
 COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
+COBJS-$(CONFIG_P1022)	+= p1022_serdes.o
 COBJS-$(CONFIG_PCI)	+= pci.o
 COBJS-$(CONFIG_QE)	+= qe_io.o
 COBJS-$(CONFIG_CPM2)	+= serial_scc.o
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
new file mode 100644
index 0000000000..d7835c8d69
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/compiler.h>
+#include <asm/processor.h>
+
+static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	__maybe_unused u32 svr = get_svr();
+
+#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
+	if (IS_SVR_REV(svr, 1, 0)) {
+		switch (SVR_SOC_VER(svr)) {
+		case SVR_P1013:
+		case SVR_P1013_E:
+		case SVR_P1022:
+		case SVR_P1022_E:
+			puts("Work-around for Erratum SATA A001 enabled\n");
+		}
+	}
+#endif
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	errata, 1, 0,	do_errata,
+	"Report errata workarounds",
+	""
+);
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 6f81fdf61b..fe2b52d860 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -32,6 +32,8 @@
 #include <fsl_esdhc.h>
 #include <asm/cache.h>
 #include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/fsl_law.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -93,18 +95,26 @@ int checkcpu (void)
 	minor = PVR_MIN(pvr);
 
 	printf("Core:  ");
-	switch (fam) {
-	case PVR_FAM(PVR_85xx):
-	    puts("E500");
-	    break;
-	default:
-	    puts("Unknown");
-	    break;
+	if (PVR_FAM(PVR_85xx)) {
+		switch(PVR_MEM(pvr)) {
+		case 0x1:
+		case 0x2:
+			puts("E500");
+			break;
+		case 0x3:
+			puts("E500MC");
+			break;
+		case 0x4:
+			puts("E5500");
+			break;
+		default:
+			puts("Unknown");
+			break;
+		}
+	} else {
+		puts("Unknown");
 	}
 
-	if (PVR_MEM(pvr) == 0x03)
-		puts("MC");
-
 	printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
 
 	get_sys_info(&sysinfo);
@@ -250,71 +260,6 @@ reset_85xx_watchdog(void)
 #endif	/* CONFIG_WATCHDOG */
 
 /*
- * Configures a UPM. The function requires the respective MxMR to be set
- * before calling this function. "size" is the number or entries, not a sizeof.
- */
-void upmconfig (uint upm, uint * table, uint size)
-{
-	int i, mdr, mad, old_mad = 0;
-	volatile u32 *mxmr;
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	volatile u32 *brp,*orp;
-	volatile u8* dummy = NULL;
-	int upmmask;
-
-	switch (upm) {
-	case UPMA:
-		mxmr = &lbc->mamr;
-		upmmask = BR_MS_UPMA;
-		break;
-	case UPMB:
-		mxmr = &lbc->mbmr;
-		upmmask = BR_MS_UPMB;
-		break;
-	case UPMC:
-		mxmr = &lbc->mcmr;
-		upmmask = BR_MS_UPMC;
-		break;
-	default:
-		printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
-		hang();
-	}
-
-	/* Find the address for the dummy write transaction */
-	for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
-		 i++, brp += 2, orp += 2) {
-
-		/* Look for a valid BR with selected UPM */
-		if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
-			dummy = (volatile u8*)(in_be32(brp) & BR_BA);
-			break;
-		}
-	}
-
-	if (i == 8) {
-		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
-		hang();
-	}
-
-	for (i = 0; i < size; i++) {
-		/* 1 */
-		out_be32(mxmr,  (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
-		/* 2 */
-		out_be32(&lbc->mdr, table[i]);
-		/* 3 */
-		mdr = in_be32(&lbc->mdr);
-		/* 4 */
-		*(volatile u8 *)dummy = 0;
-		/* 5 */
-		do {
-			mad = in_be32(mxmr) & MxMR_MAD_MSK;
-		} while (mad <= old_mad && !(!mad && i == (size-1)));
-		old_mad = mad;
-	}
-	out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
-}
-
-/*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
  */
@@ -326,3 +271,14 @@ int cpu_mmc_init(bd_t *bis)
 	return 0;
 #endif
 }
+
+/*
+ * Print out the state of various machine registers.
+ * Currently prints out LAWs, BR0/OR0, and TLBs
+ */
+void mpc85xx_reginfo(void)
+{
+	print_tlbcam();
+	print_laws();
+	print_lbc_regs();
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 99431dc1a7..d491e2ad5a 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -154,7 +154,6 @@ static void corenet_tb_init(void)
 
 void cpu_init_f (void)
 {
-	volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	extern void m8560_cpm_reset (void);
 #ifdef CONFIG_MPC8548
 	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
@@ -177,60 +176,7 @@ void cpu_init_f (void)
 	config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
 #endif
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-#if defined(CONFIG_SYS_OR0_REMAP)
-	out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP);
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP);
-#endif
-
-	/* now restrict to preliminary range */
-	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
-	if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-		out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM);
-		out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-		out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM);
-		out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM);
-#endif
-	}
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM);
-	out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM);
-	out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM);
-	out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM);
-	out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM);
-	out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM);
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM);
-	out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM);
-#endif
+       init_early_memctl_regs();
 
 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
@@ -263,7 +209,7 @@ void cpu_init_f (void)
 int cpu_init_r(void)
 {
 #ifdef CONFIG_SYS_LBC_LCRR
-	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 #endif
 
 	puts ("L2:    ");
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
index 184cca4c54..8fb27abc55 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
@@ -25,7 +25,7 @@
 
 void cpu_init_f(void)
 {
-	ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
 	/*
 	 * LCRR - Clock Ratio Register - set up local bus timing
@@ -34,8 +34,8 @@ void cpu_init_f(void)
 	out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
 
 #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
-	out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
-	out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
+	set_lbc_br(0, CONFIG_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_NAND_OR_PRELIM);
 #else
 #error  CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 1d11ab470f..2628cc5f95 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -404,8 +404,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_MP
 	ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
-#endif
 	ft_fixup_num_cores(blob);
+#endif
 
 	ft_fixup_cache(blob);
 
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ddbc2211c3..e05257cf04 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -77,6 +77,13 @@ int cpu_disable(int nr)
 
 	return 0;
 }
+
+int is_core_disabled(int nr) {
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 coredisrl = in_be32(&gur->coredisrl);
+
+	return (coredisrl & (1 << nr));
+}
 #else
 int cpu_disable(int nr)
 {
@@ -96,6 +103,22 @@ int cpu_disable(int nr)
 
 	return 0;
 }
+
+int is_core_disabled(int nr) {
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr = in_be32(&gur->devdisr);
+
+	switch (nr) {
+	case 0:
+		return (devdisr & MPC85xx_DEVDISR_CPU0);
+	case 1:
+		return (devdisr & MPC85xx_DEVDISR_CPU1);
+	default:
+		printf("Invalid cpu number for disable %d\n", nr);
+	}
+
+	return 0;
+}
 #endif
 
 static u8 boot_entry_map[4] = {
diff --git a/arch/powerpc/cpu/mpc85xx/p1022_serdes.c b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
new file mode 100644
index 0000000000..6b0fbf200c
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p1022_serdes.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+#define SRDS2_MAX_LANES		2
+
+static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	[0x00] = {NONE, NONE, NONE, NONE},
+	[0x01] = {NONE, NONE, NONE, NONE},
+	[0x02] = {NONE, NONE, NONE, NONE},
+	[0x03] = {NONE, NONE, NONE, NONE},
+	[0x04] = {NONE, NONE, NONE, NONE},
+	[0x06] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2},
+	[0x07] = {PCIE1, PCIE3, SGMII_TSEC1, PCIE2},
+	[0x09] = {PCIE1, NONE, NONE, NONE},
+	[0x0a] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0b] = {PCIE1, PCIE3, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0d] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0e] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x0f] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2},
+	[0x15] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x16] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x17] = {PCIE1, PCIE3, PCIE2, PCIE2},
+	[0x18] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x19] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1a] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1b] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1c] = {PCIE1, PCIE1, PCIE1, PCIE1},
+	[0x1d] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1e] = {PCIE1, PCIE1, PCIE2, PCIE2},
+	[0x1f] = {PCIE1, PCIE1, PCIE2, PCIE2},
+};
+
+static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
+	[0x00] = {PCIE3, PCIE3},
+	[0x01] = {PCIE2, PCIE3},
+	[0x02] = {SATA1, SATA2},
+	[0x03] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x04] = {NONE, NONE},
+	[0x06] = {SATA1, SATA2},
+	[0x07] = {NONE, NONE},
+	[0x09] = {PCIE3, PCIE2},
+	[0x0a] = {SATA1, SATA2},
+	[0x0b] = {NONE, NONE},
+	[0x0d] = {PCIE3, PCIE2},
+	[0x0e] = {SATA1, SATA2},
+	[0x0f] = {NONE, NONE},
+	[0x15] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x16] = {SATA1, SATA2},
+	[0x17] = {NONE, NONE},
+	[0x18] = {PCIE3, PCIE3},
+	[0x19] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x1a] = {SATA1, SATA2},
+	[0x1b] = {NONE, NONE},
+	[0x1c] = {PCIE3, PCIE3},
+	[0x1d] = {SGMII_TSEC1, SGMII_TSEC2},
+	[0x1e] = {SATA1, SATA2},
+	[0x1f] = {NONE, NONE},
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	unsigned int i;
+
+	debug("%s: dev = %d\n", __FUNCTION__, device);
+	debug("PORDEVSR[IO_SEL] = 0x%x\n", srds_cfg);
+
+	if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds_cfg);
+		return 0;
+	}
+
+	for (i = 0; i < SRDS1_MAX_LANES; i++) {
+		if (serdes1_cfg_tbl[srds_cfg][i] == device)
+			return 1;
+		if (serdes2_cfg_tbl[srds_cfg][i] == device)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 8132115fca..dd4c6b3e98 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-	    lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 #if defined(CONFIG_FSL_CORENET)
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index b3037aceaf..f2833a5df7 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -55,7 +55,45 @@ void init_tlbs(void)
 	return ;
 }
 
+void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
+		       phys_addr_t *rpn)
+{
+	u32 _mas1;
+
+	mtspr(MAS0, FSL_BOOKE_MAS0(1, idx, 0));
+	asm volatile("tlbre;isync");
+	_mas1 = mfspr(MAS1);
+
+	*valid = (_mas1 & MAS1_VALID);
+	*tsize = (_mas1 >> 8) & 0xf;
+	*epn = mfspr(MAS2) & MAS2_EPN;
+	*rpn = mfspr(MAS3) & MAS3_RPN;
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+	*rpn |= ((u64)mfspr(MAS7)) << 32;
+#endif
+}
+
 #ifndef CONFIG_NAND_SPL
+void print_tlbcam(void)
+{
+	int i;
+	unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
+
+	/* walk all the entries */
+	printf("TLBCAM entries\n");
+	for (i = 0; i < num_cam; i++) {
+		unsigned long epn;
+		u32 tsize, valid;
+		phys_addr_t rpn;
+
+		read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+		printf("entry %02d: V: %d EPN 0x%08x RPN 0x%08llx size:",
+			i, (valid == 0) ? 0 : 1, (unsigned int)epn,
+			(unsigned long long)rpn);
+		print_size(TSIZE_TO_BYTES(tsize), "\n");
+	}
+}
+
 static inline void use_tlb_cam(u8 idx)
 {
 	int i = idx / 32;
@@ -82,15 +120,9 @@ void init_used_tlb_cams(void)
 
 	/* walk all the entries */
 	for (i = 0; i < num_cam; i++) {
-		u32 _mas1;
-
 		mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
 		asm volatile("tlbre;isync");
-		_mas1 = mfspr(MAS1);
-
-		/* if the entry isn't valid skip it */
-		if ((_mas1 & MAS1_VALID))
+		if (mfspr(MAS1) & MAS1_VALID)
 			use_tlb_cam(i);
 	}
 }
@@ -134,7 +166,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
 
 #ifdef CONFIG_ADDR_MAP
 	if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
-		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
+		addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), esel);
 #endif
 }
 
@@ -201,26 +233,12 @@ void init_addr_map(void)
 	/* walk all the entries */
 	for (i = 0; i < num_cam; i++) {
 		unsigned long epn;
-		u32 tsize, _mas1;
+		u32 tsize, valid;
 		phys_addr_t rpn;
 
-		mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
-		asm volatile("tlbre;isync");
-		_mas1 = mfspr(MAS1);
-
-		/* if the entry isn't valid skip it */
-		if (!(_mas1 & MAS1_VALID))
-			continue;
-
-		tsize = (_mas1 >> 8) & 0xf;
-		epn = mfspr(MAS2) & MAS2_EPN;
-		rpn = mfspr(MAS3) & MAS3_RPN;
-#ifdef CONFIG_ENABLE_36BIT_PHYS
-		rpn |= ((phys_addr_t)mfspr(MAS7)) << 32;
-#endif
-
-		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i);
+		read_tlbcam_entry(i, &valid, &tsize, &epn, &rpn);
+		if (valid & MAS1_VALID)
+			addrmap_set_entry(epn, rpn, TSIZE_TO_BYTES(tsize), i);
 	}
 
 	return ;
diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c
index 9064e78037..4e90fd2203 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu.c
@@ -180,22 +180,9 @@ watchdog_reset(void)
  */
 void mpc86xx_reginfo(void)
 {
-	immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	ccsr_lbc_t *lbc = &immap->im_lbc;
-
 	print_bats();
 	print_laws();
-
-	printf ("Local Bus Controller Registers\n"
-		"\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
-	printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
-	printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
-	printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
-	printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
-	printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
-	printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
-	printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
-
+	print_lbc_regs();
 }
 
 /*
diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c
index b4f047d85d..82c216ba5d 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c
@@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void cpu_init_f(void)
 {
-	volatile immap_t    *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
@@ -61,58 +58,8 @@ void cpu_init_f(void)
 
 	setup_bats();
 
-	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
-	 * addresses - these have to be modified later when FLASH size
-	 * has been determined
-	 */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
-	memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
-	memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
-	/* now restrict to preliminary range */
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
-	memctl->br0 = CONFIG_SYS_BR0_PRELIM;
-	memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
-	memctl->or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
-	memctl->or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
+	init_early_memctl_regs();
 
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
-	memctl->or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
-	memctl->or4 = CONFIG_SYS_OR4_PRELIM;
-	memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
-	memctl->or5 = CONFIG_SYS_OR5_PRELIM;
-	memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
-	memctl->or6 = CONFIG_SYS_OR6_PRELIM;
-	memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
-	memctl->or7 = CONFIG_SYS_OR7_PRELIM;
-	memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
 #if defined(CONFIG_FSL_DMA)
 	dma_init();
 #endif
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 51f3f4c220..ff89ee554c 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008,2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -55,6 +55,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
 	if (off < 0)
 		printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
-#endif
+
 	ft_fixup_num_cores(blob);
+#endif
 }
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 24eb30aaaa..30c99ebc56 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -66,6 +66,23 @@ int cpu_disable(int nr)
 	return 0;
 }
 
+int is_core_disabled(int nr) {
+	immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
+	ccsr_gur_t *gur = &immap->im_gur;
+	u32 devdisr = in_be32(&gur->devdisr);
+
+	switch (nr) {
+	case 0:
+		return (devdisr & MPC86xx_DEVDISR_CPU0);
+	case 1:
+		return (devdisr & MPC86xx_DEVDISR_CPU1);
+	default:
+		printf("Invalid cpu number for disable %d\n", nr);
+	}
+
+	return 0;
+}
+
 int cpu_release(int nr, int argc, char * const argv[])
 {
 	/* dummy function so common/cmd_mp.c will build
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index 64a3479d7e..a2d0a8ac6e 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
 #else
-	{
-		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-		lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
-	}
+	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
 		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 481f9e541d..ea5122289e 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright 2009 Freescale Semiconductor, Inc.
+# Copyright 2009-2010 Freescale Semiconductor, Inc.
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License
@@ -10,9 +10,13 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib8xxx.a
 
+ifneq ($(CPU),mpc83xx)
 COBJS-y	+= cpu.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_PCI)	+= pci_cfg.o
+endif
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index ccefaf5716..88c47d1aed 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -26,6 +26,27 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <asm/mp.h>
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+static int ft_del_cpuhandle(void *blob, int cpuhandle)
+{
+	int off, ret = -FDT_ERR_NOTFOUND;
+
+	/* if we find a match, we'll delete at it which point the offsets are
+	 * invalid so we start over from the beginning
+	 */
+	off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+						&cpuhandle, 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		fdt_delprop(blob, off, "cpu-handle");
+		ret = 1;
+		off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+				&cpuhandle, 4);
+	}
+
+	return ret;
+}
 
 void ft_fixup_num_cores(void *blob) {
 	int off, num_cores, del_cores;
@@ -37,13 +58,18 @@ void ft_fixup_num_cores(void *blob) {
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 
-		/* if we find a cpu node outside of what we expect delete it
-		 * and reset the offset back to the start since we can't
-		 * trust the offsets anymore
-		 */
-		if (*reg > num_cores-1) {
-			fdt_del_node(blob, off);
-			del_cores++;
+		if ((*reg > num_cores-1) || (is_core_disabled(*reg))) {
+			int ph = fdt_get_phandle(blob, off);
+
+			/* Delete the cpu node once there are no cpu handles */
+			if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) {
+				fdt_del_node(blob, off);
+				del_cores++;
+			}
+			/* either we deleted some cpu handles or the cpu node
+			 * so we reset the offset back to the start since we
+			 * can't trust the offsets anymore
+			 */
 			off = -1;
 		}
 		off = fdt_node_offset_by_prop_value(blob, off,
@@ -53,3 +79,139 @@ void ft_fixup_num_cores(void *blob) {
 	debug ("deleted %d extra core entry entries from device tree\n",
 								del_cores);
 }
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+	char *mode;
+	char *type;
+	const char *compat = "fsl-usb2-dr";
+	const char *prop_mode = "dr_mode";
+	const char *prop_type = "phy_type";
+	int node_offset;
+	int err;
+
+	mode = getenv("usb_dr_mode");
+	type = getenv("usb_phy_type");
+	if (!mode && !type)
+		return;
+
+	node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+	if (node_offset < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compat, fdt_strerror(node_offset));
+		return;
+	}
+
+	if (mode) {
+		err = fdt_setprop(blob, node_offset, prop_mode, mode,
+				  strlen(mode) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_mode, compat, fdt_strerror(err));
+	}
+
+	if (type) {
+		err = fdt_setprop(blob, node_offset, prop_type, type,
+				  strlen(type) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_type, compat, fdt_strerror(err));
+	}
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
+
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an E processor
+ */
+#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	const struct sec_rev_prop {
+		u32 sec_rev;
+		u32 num_channels;
+		u32 channel_fifo_len;
+		u32 exec_units_mask;
+		u32 descriptor_types_mask;
+	} sec_rev_prop_list [] = {
+		{ 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+		{ 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+		{ 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+		{ 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+		{ 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+	};
+	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+			    sizeof("fsl,secX.Y")];
+	int crypto_node, sec_idx, err;
+	char *p;
+	u32 val;
+
+	/* locate crypto node based on lowest common compatible */
+	crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+	if (crypto_node == -FDT_ERR_NOTFOUND)
+		return;
+
+	/* delete it if not on an E-processor */
+	if (crypto_node > 0 && !sec_rev) {
+		fdt_del_node(blob, crypto_node);
+		return;
+	}
+
+	/* else we got called for possible uprev */
+	for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+		if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+			break;
+
+	if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+		puts("warning: unknown SEC revision number\n");
+		return;
+	}
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+	err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+	err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = 0;
+	while (sec_idx >= 0) {
+		p = compat_strlist + val;
+		val += sprintf(p, "fsl,sec%d.%d",
+			(sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+			sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+		sec_idx--;
+	}
+	err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+}
+#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4  /* SEC4 */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	if (!sec_rev)
+		fdt_del_node_and_alias(blob, "crypto");
+}
+#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
new file mode 100644
index 0000000000..fcef40c5b8
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_lbc.h>
+
+void print_lbc_regs(void)
+{
+	int i;
+
+	printf("\nLocal Bus Controller Registers\n");
+	for (i = 0; i < 8; i++) {
+		printf("BR%d\t0x%08X\tOR%d\t0x%08X\n",
+		       i, get_lbc_br(i), i, get_lbc_or(i));
+	}
+}
+
+void init_early_memctl_regs(void)
+{
+	uint init_br1 = 1;
+
+#ifdef CONFIG_MPC85xx
+	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
+	if (get_lbc_br(1) & BR_V)
+		init_br1 = 0;
+#endif
+
+	/*
+	 * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+	 * preliminary addresses - these have to be modified later
+	 * when FLASH size has been determined
+	 */
+#if defined(CONFIG_SYS_OR0_REMAP)
+	set_lbc_or(0, CONFIG_SYS_OR0_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+	set_lbc_or(1, CONFIG_SYS_OR1_REMAP);
+#endif
+	/* now restrict to preliminary range */
+	if (init_br1) {
+		set_lbc_br(0, CONFIG_SYS_BR0_PRELIM);
+		set_lbc_or(0, CONFIG_SYS_OR0_PRELIM);
+
+#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
+		set_lbc_or(1, CONFIG_SYS_OR1_PRELIM);
+		set_lbc_br(1, CONFIG_SYS_BR1_PRELIM);
+#endif
+	}
+
+#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
+	set_lbc_or(5, CONFIG_SYS_OR5_PRELIM);
+	set_lbc_br(5, CONFIG_SYS_BR5_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
+	set_lbc_or(6, CONFIG_SYS_OR6_PRELIM);
+	set_lbc_br(6, CONFIG_SYS_BR6_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
+	set_lbc_or(7, CONFIG_SYS_OR7_PRELIM);
+	set_lbc_br(7, CONFIG_SYS_BR7_PRELIM);
+#endif
+}
+
+/*
+ * Configures a UPM. The function requires the respective MxMR to be set
+ * before calling this function. "size" is the number or entries, not a sizeof.
+ */
+void upmconfig(uint upm, uint *table, uint size)
+{
+	fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	int i, mdr, mad, old_mad = 0;
+	u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK);
+	u32 msel = BR_UPMx_TO_MSEL(upm);
+	u32 *mxmr = &lbc->mamr + upm;
+	volatile u8 *dummy = NULL;
+
+	if (upm < UPMA || upm > UPMC) {
+		printf("Error: %s() Bad UPM index %d\n", __func__, upm);
+		hang();
+	}
+
+	/*
+	 * Find the address for the dummy write - scan all of the BRs until we
+	 * find one matching the UPM and extract the base address bits from it.
+	 */
+	for (i = 0; i < 8; i++) {
+		if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) {
+			dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA);
+			break;
+		}
+	}
+
+	if (!dummy) {
+		printf("Error: %s() No matching BR\n", __func__);
+		hang();
+	}
+
+	/* Program UPM using steps outlined by the reference manual */
+	for (i = 0; i < size; i++) {
+		out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i);
+		out_be32(&lbc->mdr, table[i]);
+		mdr = in_be32(&lbc->mdr);
+		*dummy = 0;
+		do {
+			mad = in_be32(mxmr) & MxMR_MAD_MSK;
+		} while (mad <= old_mad && !(!mad && i == (size-1)));
+		old_mad = mad;
+	}
+
+	/* Return to normal operation */
+	out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM);
+}
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index fc3facb307..d88c282f75 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -66,6 +66,15 @@
 #define CONFIG_TSECV2
 #endif
 
+/*
+ * SEC (crypto unit) major compatible version determination
+ */
+#if defined(CONFIG_FSL_CORENET)
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#endif
+
 /* Number of TLB CAM entries we have on FSL Book-E chips */
 #if defined(CONFIG_E500MC)
 #define CONFIG_SYS_NUM_TLBCAMS	64
@@ -76,4 +85,10 @@
 /* Relocation to SDRAM works on all PPC boards */
 #define CONFIG_RELOC_FIXUP_WORKS
 
+/* Since so many PPC SOCs have a semi-common LBC, define this here */
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
+	defined(CONFIG_MPC83xx)
+#define CONFIG_FSL_LBC
+#endif
+
 #endif /* _ASM_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 34c56a259a..12ba1a6a04 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -47,6 +47,7 @@ enum law_size {
 };
 
 #define law_size_bits(sz)	(__ilog2_u64(sz) - 1)
+#define lawar_size(x)	(1ULL << ((x & 0x3f) + 1))
 
 #ifdef CONFIG_FSL_CORENET
 enum law_trgt_if {
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 03ae6a765b..82d24ab13f 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -14,6 +14,7 @@
 #define __ASM_PPC_FSL_LBC_H
 
 #include <config.h>
+#include <common.h>
 
 /* BR - Base Registers
  */
@@ -61,6 +62,8 @@
 #define BR_V				0x00000001
 #define BR_V_SHIFT			0
 
+#define BR_UPMx_TO_MSEL(x)		((x + 4) << BR_MSEL_SHIFT)
+
 #define UPMA			0
 #define UPMB			1
 #define UPMC			2
@@ -453,49 +456,70 @@
 #define LTESR_CC               0x00000001
 
 #ifndef __ASSEMBLY__
-/*
- * Local Bus Controller Registers.
- */
-typedef struct lbus_bank {
-	u32 br;                 /* Base Register */
-	u32 or;                 /* Option Register */
-} lbus_bank_t;
-
-typedef struct fsl_lbus {
-	lbus_bank_t bank[8];
-	u8 res0[0x28];
-	u32 mar;                /* UPM Address Register */
-	u8 res1[0x4];
-	u32 mamr;               /* UPMA Mode Register */
-	u32 mbmr;               /* UPMB Mode Register */
-	u32 mcmr;               /* UPMC Mode Register */
-	u8 res2[0x8];
-	u32 mrtpr;              /* Memory Refresh Timer Prescaler Register */
-	u32 mdr;                /* UPM Data Register */
-	u8 res3[0x4];
-	u32 lsor;               /* Special Operation Initiation Register */
-	u32 lsdmr;              /* SDRAM Mode Register */
-	u8 res4[0x8];
-	u32 lurt;               /* UPM Refresh Timer */
-	u32 lsrt;               /* SDRAM Refresh Timer */
-	u8 res5[0x8];
-	u32 ltesr;              /* Transfer Error Status Register */
-	u32 ltedr;              /* Transfer Error Disable Register */
-	u32 lteir;              /* Transfer Error Interrupt Register */
-	u32 lteatr;             /* Transfer Error Attributes Register */
-	u32 ltear;               /* Transfer Error Address Register */
-	u8 res6[0xC];
-	u32 lbcr;               /* Configuration Register */
-	u32 lcrr;               /* Clock Ratio Register */
-	u8 res7[0x8];
-	u32 fmr;                /* Flash Mode Register */
-	u32 fir;                /* Flash Instruction Register */
-	u32 fcr;                /* Flash Command Register */
-	u32 fbar;               /* Flash Block Addr Register */
-	u32 fpar;               /* Flash Page Addr Register */
-	u32 fbcr;               /* Flash Byte Count Register */
-	u8 res8[0xF08];
-} fsl_lbus_t;
-#endif /* __ASSEMBLY__ */
+#include <asm/io.h>
+
+extern void print_lbc_regs(void);
+extern void init_early_memctl_regs(void);
+extern void upmconfig(uint upm, uint *table, uint size);
+
+#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR)
+#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br))
+#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or))
+#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v))
+#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v))
+
+typedef struct lbc_bank {
+	u32     br;
+	u32     or;
+} lbc_bank_t;
 
+/* Local Bus Controller Registers */
+typedef struct fsl_lbc {
+	lbc_bank_t      bank[8];
+	u8	res1[40];
+	u32     mar;            /* LBC UPM Addr */
+	u8      res2[4];
+	u32     mamr;           /* LBC UPMA Mode */
+	u32     mbmr;           /* LBC UPMB Mode */
+	u32     mcmr;           /* LBC UPMC Mode */
+	u8      res3[8];
+	u32     mrtpr;          /* LBC Memory Refresh Timer Prescaler */
+	u32     mdr;            /* LBC UPM Data */
+#ifdef CONFIG_FSL_ELBC
+	u8      res4[4];
+	u32     lsor;
+	u8      res5[12];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u8	res6[4];
+#else
+	u8	res4[8];
+	u32     lsdmr;          /* LBC SDRAM Mode */
+	u8	res5[8];
+	u32     lurt;           /* LBC UPM Refresh Timer */
+	u32     lsrt;           /* LBC SDRAM Refresh Timer */
+#endif
+	u8      res7[8];
+	u32     ltesr;          /* LBC Transfer Error Status */
+	u32     ltedr;          /* LBC Transfer Error Disable */
+	u32     lteir;          /* LBC Transfer Error IRQ */
+	u32     lteatr;         /* LBC Transfer Error Attrs */
+	u32     ltear;          /* LBC Transfer Error Addr */
+	u8      res8[12];
+	u32     lbcr;           /* LBC Configuration */
+	u32     lcrr;           /* LBC Clock Ratio */
+#ifdef CONFIG_NAND_FSL_ELBC
+	u8	res9[0x8];
+	u32     fmr;            /* Flash Mode Register */
+	u32     fir;            /* Flash Instruction Register */
+	u32     fcr;            /* Flash Command Register */
+	u32     fbar;           /* Flash Block Addr Register */
+	u32     fpar;           /* Flash Page Addr Register */
+	u32     fbcr;           /* Flash Byte Count Register */
+	u8      res10[0xF08];
+#else
+	u8      res9[0xF28];
+#endif
+} fsl_lbc_t;
+
+#endif /* __ASSEMBLY__ */
 #endif /* __ASM_PPC_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index db61e7e9cb..bb875435d3 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -162,14 +162,15 @@ typedef struct ccsr_pci {
 } ccsr_fsl_pci_t;
 
 struct fsl_pci_info {
-	unsigned long	regs;
-	pci_addr_t	mem_bus;
-	phys_size_t	mem_phys;
-	pci_size_t	mem_size;
-	pci_addr_t	io_bus;
-	phys_size_t	io_phys;
-	pci_size_t	io_size;
-	int		pci_num;
+	unsigned long regs;
+	pci_addr_t mem_bus;
+	phys_size_t mem_phys;
+	pci_size_t mem_size;
+	pci_addr_t io_bus;
+	phys_size_t io_phys;
+	pci_size_t io_size;
+	enum law_trgt_if law;
+	int pci_num;
 };
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
@@ -184,6 +185,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	x.io_bus = CONFIG_SYS_PCI##num##_IO_BUS; \
 	x.io_phys = CONFIG_SYS_PCI##num##_IO_PHYS; \
 	x.io_size = CONFIG_SYS_PCI##num##_IO_SIZE; \
+	x.law = LAW_TRGT_IF_PCI_##num; \
 	x.pci_num = num; \
 }
 
@@ -196,6 +198,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	x.io_bus = CONFIG_SYS_PCIE##num##_IO_BUS; \
 	x.io_phys = CONFIG_SYS_PCIE##num##_IO_PHYS; \
 	x.io_size = CONFIG_SYS_PCIE##num##_IO_SIZE; \
+	x.law = LAW_TRGT_IF_PCIE_##num; \
 	x.pci_num = num; \
 }
 
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 3a9cdc4f8d..cc0293acd4 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -646,7 +646,7 @@ typedef struct immap {
 	u8			res2[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res3[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res4[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -686,7 +686,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -721,7 +721,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -766,7 +766,7 @@ typedef struct immap {
 	u8			res1[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res3[0x1000];
 	spi8xxx_t		spi;		/* Serial Peripheral Interface */
 	dma83xx_t		dma;		/* DMA */
@@ -816,7 +816,7 @@ typedef struct immap {
 	u8			res4[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res5[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res6[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -855,7 +855,7 @@ typedef struct immap {
 	u8			res3[0x1300];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res4[0x900];
-	fsl_lbus_t		lbus;	/* Local Bus Controller Registers */
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
 	u8			res5[0x2000];
 	dma83xx_t		dma;		/* DMA */
 	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
@@ -879,6 +879,7 @@ typedef struct immap {
 #endif
 #define CONFIG_SYS_MPC83xx_USB_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
+#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 5b205d1c24..4e665d3994 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -266,50 +266,6 @@ typedef struct ccsr_duart {
 } ccsr_duart_t;
 #endif
 
-/* Local Bus Controller Registers */
-typedef struct ccsr_lbc {
-	u32	br0;		/* LBC Base 0 */
-	u32	or0;		/* LBC Options 0 */
-	u32	br1;		/* LBC Base 1 */
-	u32	or1;		/* LBC Options 1 */
-	u32	br2;		/* LBC Base 2 */
-	u32	or2;		/* LBC Options 2 */
-	u32	br3;		/* LBC Base 3 */
-	u32	or3;		/* LBC Options 3 */
-	u32	br4;		/* LBC Base 4 */
-	u32	or4;		/* LBC Options 4 */
-	u32	br5;		/* LBC Base 5 */
-	u32	or5;		/* LBC Options 5 */
-	u32	br6;		/* LBC Base 6 */
-	u32	or6;		/* LBC Options 6 */
-	u32	br7;		/* LBC Base 7 */
-	u32	or7;		/* LBC Options 7 */
-	u8	res1[40];
-	u32	mar;		/* LBC UPM Addr */
-	u8	res2[4];
-	u32	mamr;		/* LBC UPMA Mode */
-	u32	mbmr;		/* LBC UPMB Mode */
-	u32	mcmr;		/* LBC UPMC Mode */
-	u8	res3[8];
-	u32	mrtpr;		/* LBC Memory Refresh Timer Prescaler */
-	u32	mdr;		/* LBC UPM Data */
-	u8	res4[8];
-	u32	lsdmr;		/* LBC SDRAM Mode */
-	u8	res5[8];
-	u32	lurt;		/* LBC UPM Refresh Timer */
-	u32	lsrt;		/* LBC SDRAM Refresh Timer */
-	u8	res6[8];
-	u32	ltesr;		/* LBC Transfer Error Status */
-	u32	ltedr;		/* LBC Transfer Error Disable */
-	u32	lteir;		/* LBC Transfer Error IRQ */
-	u32	lteatr;		/* LBC Transfer Error Attrs */
-	u32	ltear;		/* LBC Transfer Error Addr */
-	u8	res7[12];
-	u32	lbcr;		/* LBC Configuration */
-	u32	lcrr;		/* LBC Clock Ratio */
-	u8	res8[3880];
-} ccsr_lbc_t;
-
 /* eSPI Registers */
 typedef struct ccsr_espi {
 	u32	mode;		/* eSPI mode */
@@ -2045,6 +2001,41 @@ enum {
 	FSL_SRDS_B3_LANE_D = 23,
 };
 
+/* Security Engine Block (MS = Most Sig., LS = Least Sig.) */
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+typedef struct ccsr_sec {
+	u8	res1[0xfa0];
+	u32	crnr_ms;	/* CHA Revision Number Register, MS */
+	u32	crnr_ls;	/* CHA Revision Number Register, LS */
+	u32	ctpr_ms;	/* Compile Time Parameters Register, MS */
+#define SEC_CTPR_MS_AXI_LIODN		0x08000000
+#define SEC_CTPR_MS_QI			0x02000000
+	u32	ctpr_ls;	/* Compile Time Parameters Register, LS */
+	u8	res2[0x10];
+	u32	far_ms;		/* Fault Address Register, MS */
+	u32	far_ls;		/* Fault Address Register, LS */
+	u32	falr;		/* Fault Address LIODN Register */
+	u32	fadr;		/* Fault Address Detail Register */
+	u8	res3[0x4];
+	u32	csta;		/* CAAM Status Register */
+	u8	res4[0x8];
+	u32	rvid;		/* Run Time Integrity Checking Version ID Reg.*/
+#define SEC_RVID_MA			0x0f000000
+	u32	ccbvid;		/* CHA Cluster Block Version ID Register */
+	u32	chavid_ms;	/* CHA Version ID Register, MS */
+	u32	chavid_ls;	/* CHA Version ID Register, LS */
+	u32	chanum_ms;	/* CHA Number Register, MS */
+#define SEC_CHANUM_MS_JQNUM_MASK	0xf0000000
+#define SEC_CHANUM_MS_JQNUM_SHIFT	28
+#define SEC_CHANUM_MS_DECONUM_MASK	0x0f000000
+#define SEC_CHANUM_MS_DECONUM_SHIFT	24
+	u32	chanum_ls;	/* CHA Number Register, LS */
+	u32	caamvid_ms;	/* CAAM Version ID Register, MS */
+	u32	caamvid_ls;	/* CAAM Version ID Register, LS */
+	u8	res5[0xf000];
+} ccsr_sec_t;
+#endif
+
 #ifdef CONFIG_FSL_CORENET
 #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET	0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
@@ -2059,6 +2050,7 @@ enum {
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
 #define CONFIG_SYS_MPC85xx_USB_OFFSET		0x210000
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x300000
 #define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET	0x318000
 #define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET	0x31a000
 #define CONFIG_SYS_TSEC1_OFFSET			0x4e0000 /* FM1@DTSEC0 */
@@ -2111,7 +2103,7 @@ enum {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
 #define CONFIG_SYS_MPC85xx_DDR2_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_LBC_ADDR \
+#define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_MPC85xx_ESPI_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
@@ -2143,6 +2135,8 @@ enum {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define CONFIG_SYS_FSL_SEC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
 
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index fd7acdb767..b9e02dbc79 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -12,6 +12,7 @@
 
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
+#include <asm/fsl_lbc.h>
 #include <asm/fsl_i2c.h>
 
 /* Local-Access Registers and MCM Registers(0x0000-0x2000) */
@@ -190,51 +191,6 @@ typedef struct ccsr_duart {
 	char	res5[2543];
 } ccsr_duart_t;
 
-
-/* Local Bus Controller Registers(0x5000-0x6000) */
-typedef struct ccsr_lbc {
-	uint	br0;		/* 0x5000 - LBC Base Register 0 */
-	uint	or0;		/* 0x5004 - LBC Options Register 0 */
-	uint	br1;		/* 0x5008 - LBC Base Register 1 */
-	uint	or1;		/* 0x500c - LBC Options Register 1 */
-	uint	br2;		/* 0x5010 - LBC Base Register 2 */
-	uint	or2;		/* 0x5014 - LBC Options Register 2 */
-	uint	br3;		/* 0x5018 - LBC Base Register 3 */
-	uint	or3;		/* 0x501c - LBC Options Register 3 */
-	uint	br4;		/* 0x5020 - LBC Base Register 4 */
-	uint	or4;		/* 0x5024 - LBC Options Register 4 */
-	uint	br5;		/* 0x5028 - LBC Base Register 5 */
-	uint	or5;		/* 0x502c - LBC Options Register 5 */
-	uint	br6;		/* 0x5030 - LBC Base Register 6 */
-	uint	or6;		/* 0x5034 - LBC Options Register 6 */
-	uint	br7;		/* 0x5038 - LBC Base Register 7 */
-	uint	or7;		/* 0x503c - LBC Options Register 7 */
-	char	res1[40];
-	uint	mar;		/* 0x5068 - LBC UPM Address Register */
-	char	res2[4];
-	uint	mamr;		/* 0x5070 - LBC UPMA Mode Register */
-	uint	mbmr;		/* 0x5074 - LBC UPMB Mode Register */
-	uint	mcmr;		/* 0x5078 - LBC UPMC Mode Register */
-	char	res3[8];
-	uint	mrtpr;		/* 0x5084 - LBC Memory Refresh Timer Prescaler Register */
-	uint	mdr;		/* 0x5088 - LBC UPM Data Register */
-	char	res4[8];
-	uint	lsdmr;		/* 0x5094 - LBC SDRAM Mode Register */
-	char	res5[8];
-	uint	lurt;		/* 0x50a0 - LBC UPM Refresh Timer */
-	uint	lsrt;		/* 0x50a4 - LBC SDRAM Refresh Timer */
-	char	res6[8];
-	uint	ltesr;		/* 0x50b0 - LBC Transfer Error Status Register */
-	uint	ltedr;		/* 0x50b4 - LBC Transfer Error Disable Register */
-	uint	lteir;		/* 0x50b8 - LBC Transfer Error Interrupt Register */
-	uint	lteatr;		/* 0x50bc - LBC Transfer Error Attributes Register */
-	uint	ltear;		/* 0x50c0 - LBC Transfer Error Address Register */
-	char	res7[12];
-	uint	lbcr;		/* 0x50d0 - LBC Configuration Register */
-	uint	lcrr;		/* 0x50d4 - LBC Clock Ratio Register */
-	char	res8[3880];
-} ccsr_lbc_t;
-
 /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */
 typedef struct ccsr_pex {
 	uint	cfg_addr;	/* 0x8000 - PEX Configuration Address Register */
@@ -1270,7 +1226,7 @@ typedef struct immap {
 	ccsr_ddr_t		im_ddr1;
 	ccsr_i2c_t		im_i2c;
 	ccsr_duart_t		im_duart;
-	ccsr_lbc_t		im_lbc;
+	fsl_lbc_t		im_lbc;
 	ccsr_ddr_t		im_ddr2;
 	char                    res1[4096];
 	ccsr_pex_t		im_pex1;
@@ -1303,6 +1259,7 @@ extern immap_t  *immr;
 
 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
 #define CONFIG_SYS_MDIO1_OFFSET		0x24000
+#define CONFIG_SYS_LBC_ADDR		(&((immap_t *)CONFIG_SYS_IMMR)->im_lbc)
 
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 5166507f92..c01c85f6d3 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -402,6 +402,7 @@ extern void print_bats(void);
 #define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
 #define MAS1_TS		0x00001000
 #define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+#define TSIZE_TO_BYTES(x) ((phys_addr_t)(1UL << ((tsize * 2) + 10)))
 
 #define MAS2_EPN	0xFFFFF000
 #define MAS2_X0		0x00000040
@@ -485,6 +486,7 @@ extern void init_tlbs(void);
 extern int find_tlb_idx(void *addr, u8 tlbsel);
 extern void init_used_tlb_cams(void);
 extern int find_free_tlbcam(void);
+extern void print_tlbcam(void);
 
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index 5388c951c8..3ffa30b978 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -26,5 +26,6 @@
 void setup_mp(void);
 void cpu_mp_lmb_reserve(struct lmb *lmb);
 u32 determine_mp_bootpg(void);
+int is_core_disabled(int nr);
 
 #endif
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 9ec319ae17..844552c2d2 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -534,9 +534,11 @@
 #define SPRN_MCSRR0	0x23a	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23b	/* Machine Check Save and Restore Register 1 */
 #define SPRN_BUCSR	0x3f5	/* Branch Control and Status Register */
+#define	  BUCSR_STAC_EN	0x01000000	/* Segment target addr cache enable */
+#define	  BUCSR_LS_EN	0x00400000	/* Link stack enable */
 #define	  BUCSR_BBFI	0x00000200	/* Branch buffer flash invalidate */
 #define	  BUCSR_BPEN	0x00000001	/* Branch prediction enable */
-#define   BUCSR_ENABLE (BUCSR_BBFI|BUCSR_BPEN)
+#define   BUCSR_ENABLE (BUCSR_STAC_EN|BUCSR_LS_EN|BUCSR_BBFI|BUCSR_BPEN)
 #define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
 #define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
 #define SPRN_PID1	0x279	/* Process ID Register 1 */