diff options
author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-02-17 16:17:22 +0900 |
---|---|---|
committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2017-02-23 08:37:56 +0900 |
commit | c21f58548c812032207d986ca7b5baa0bb4a5972 (patch) | |
tree | 49f43cb06d48b8a4a9f4a23e3d38f649e95d3878 /arch | |
parent | 04f3da393667b094adc4fef37db71c7327d5ed7d (diff) |
ARM: uniphier: deassert RST_n of eMMC device for LD11/LD20
For LD11 and LD20 SoCs, the RST_n pin is asserted by default. If
the EXT_CSD[162], bit[1:0] (RST_n_ENABLE) is fused, the eMMC device
would stay in the reset state until its RST_n pin is deasserted by
software.
Currently, this is cared by an ad-hoc way because the eMMC hardware
reset provider is not supported in U-Boot for now. This code should
be re-written once the "mmc-pwrseq-emmc" binding is supported.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/mach-uniphier/board_init.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/clk/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/clk/clk-ld11.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/clk/clk-ld20.c | 17 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/init.h | 1 |
5 files changed, 25 insertions, 1 deletions
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c index e89a4c59e2..2564a02a62 100644 --- a/arch/arm/mach-uniphier/board_init.c +++ b/arch/arm/mach-uniphier/board_init.c @@ -165,6 +165,7 @@ static const struct uniphier_initdata uniphier_initdata[] = { .nand_2cs = false, .sbc_init = uniphier_ld11_sbc_init, .pll_init = uniphier_ld20_pll_init, + .clk_init = uniphier_ld20_clk_init, .misc_init = uniphier_ld20_misc_init, }, #endif diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index 43df670ca0..41341970ec 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_ARCH_UNIPHIER_PRO5) += clk-pro5.o obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += clk-pxs2.o obj-$(CONFIG_ARCH_UNIPHIER_LD11) += clk-ld11.o pll-ld11.o -obj-$(CONFIG_ARCH_UNIPHIER_LD20) += pll-ld20.o +obj-$(CONFIG_ARCH_UNIPHIER_LD20) += clk-ld20.o pll-ld20.o obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += pll-pxs3.o endif diff --git a/arch/arm/mach-uniphier/clk/clk-ld11.c b/arch/arm/mach-uniphier/clk/clk-ld11.c index b1e82a150a..a4dcde743b 100644 --- a/arch/arm/mach-uniphier/clk/clk-ld11.c +++ b/arch/arm/mach-uniphier/clk/clk-ld11.c @@ -13,6 +13,8 @@ #include "../sc64-regs.h" #include "../sg-regs.h" +#define SDCTRL_EMMC_HW_RESET 0x59810280 + void uniphier_ld11_clk_init(void) { /* if booted from a device other than USB, without stand-by MPU */ @@ -28,6 +30,9 @@ void uniphier_ld11_clk_init(void) writel(7, SG_ETPHYCNT); } + /* TODO: use "mmc-pwrseq-emmc" */ + writel(1, SDCTRL_EMMC_HW_RESET); + #ifdef CONFIG_USB_EHCI { /* FIXME: the current clk driver can not handle parents */ diff --git a/arch/arm/mach-uniphier/clk/clk-ld20.c b/arch/arm/mach-uniphier/clk/clk-ld20.c new file mode 100644 index 0000000000..5bb560cafe --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ld20.c @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2017 Socionext Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> + +#include "../init.h" + +#define SDCTRL_EMMC_HW_RESET 0x59810280 + +void uniphier_ld20_clk_init(void) +{ + /* TODO: use "mmc-pwrseq-emmc" */ + writel(1, SDCTRL_EMMC_HW_RESET); +} diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h index be0ad6c374..5c45f2d31b 100644 --- a/arch/arm/mach-uniphier/init.h +++ b/arch/arm/mach-uniphier/init.h @@ -118,6 +118,7 @@ void uniphier_pro4_clk_init(void); void uniphier_pro5_clk_init(void); void uniphier_pxs2_clk_init(void); void uniphier_ld11_clk_init(void); +void uniphier_ld20_clk_init(void); unsigned int uniphier_boot_device_raw(void); int uniphier_pin_init(const char *pinconfig_name); |