rockchip: rk3399: add board_debug_uart_init()

Use board_debug_uart_init() for UART iomux init instead of
do it in board_init_f, and move the function to soc file so
that we can find all the soc/board setting in soc file and
use a common board file for all rockchip SoCs later.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

2 files changed, 51 insertions, 49 deletions

diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c
index 54a4b848a3..800ca80022 100644
--- a/arch/arm/mach-rockchip/rk3399-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
@@ -127,53 +127,6 @@ void secure_timer_init(void)
 	writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
 }
 
-void board_debug_uart_init(void)
-{
-#define GRF_BASE	0xff770000
-#define GPIO0_BASE	0xff720000
-#define PMUGRF_BASE	0xff320000
-	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
-#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-	struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
-	struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
-#endif
-
-#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
-	/* Enable early UART0 on the RK3399 */
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C0_SEL_MASK,
-		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio2c_iomux,
-		     GRF_GPIO2C1_SEL_MASK,
-		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
-#else
-# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
-	rk_setreg(&grf->io_vsel, 1 << 0);
-
-	/*
-	 * Let's enable these power rails here, we are already running the SPI
-	 * Flash based code.
-	 */
-	spl_gpio_output(gpio, GPIO(BANK_B, 2), 1);  /* PP1500_EN */
-	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
-
-	spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);  /* PP3000_EN */
-	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
-#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
-
-	/* Enable early UART2 channel C on the RK3399 */
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C3_SEL_MASK,
-		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
-	rk_clrsetreg(&grf->gpio4c_iomux,
-		     GRF_GPIO4C4_SEL_MASK,
-		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
-	/* Set channel C as UART2 input */
-	rk_clrsetreg(&grf->soc_con7,
-		     GRF_UART_DBG_SEL_MASK,
-		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
-#endif
-}
 
 void board_init_f(ulong dummy)
 {
@@ -183,8 +136,7 @@ void board_init_f(ulong dummy)
 	struct rk3399_grf_regs *grf;
 	int ret;
 
-#define EARLY_UART
-#ifdef EARLY_UART
+#ifdef CONFIG_DEBUG_UART
 	debug_uart_init();
 
 # ifdef CONFIG_TARGET_CHROMEBOOK_BOB
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c
index 612ebdfe72..4b11c86b70 100644
--- a/arch/arm/mach-rockchip/rk3399/rk3399.c
+++ b/arch/arm/mach-rockchip/rk3399/rk3399.c
@@ -58,3 +58,53 @@ int arch_cpu_init(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+#define GRF_BASE	0xff770000
+#define GPIO0_BASE	0xff720000
+#define PMUGRF_BASE	0xff320000
+	struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+	struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
+	struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
+#endif
+
+#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
+	/* Enable early UART0 on the RK3399 */
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C0_SEL_MASK,
+		     GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio2c_iomux,
+		     GRF_GPIO2C1_SEL_MASK,
+		     GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
+#else
+# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
+	rk_setreg(&grf->io_vsel, 1 << 0);
+
+	/*
+	 * Let's enable these power rails here, we are already running the SPI
+	 * Flash based code.
+	 */
+	spl_gpio_output(gpio, GPIO(BANK_B, 2), 1);  /* PP1500_EN */
+	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
+
+	spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);  /* PP3000_EN */
+	spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
+#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
+
+	/* Enable early UART2 channel C on the RK3399 */
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C3_SEL_MASK,
+		     GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
+	rk_clrsetreg(&grf->gpio4c_iomux,
+		     GRF_GPIO4C4_SEL_MASK,
+		     GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
+	/* Set channel C as UART2 input */
+	rk_clrsetreg(&grf->soc_con7,
+		     GRF_UART_DBG_SEL_MASK,
+		     GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
+#endif
+}
+#endif