MSCC: add support for Ocelot SoCs

This family of SoCs are found in the Microsemi Switches solution and have
already a support in the linux kernel.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

15 files changed, 1450 insertions, 0 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 355d3b4d91..fe041f0b78 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -59,6 +59,11 @@ config ARCH_ATH79
 	select OF_CONTROL
 	imply CMD_DM
 
+config ARCH_MSCC
+	bool "Support MSCC VCore-III"
+	select OF_CONTROL
+	select DM
+
 config ARCH_BMIPS
 	bool "Support BMIPS SoCs"
 	select CLK
@@ -138,6 +143,7 @@ source "board/imgtec/xilfpga/Kconfig"
 source "board/micronas/vct/Kconfig"
 source "board/qemu-mips/Kconfig"
 source "arch/mips/mach-ath79/Kconfig"
+source "arch/mips/mach-mscc/Kconfig"
 source "arch/mips/mach-bmips/Kconfig"
 source "arch/mips/mach-pic32/Kconfig"
 source "arch/mips/mach-mt7620/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 802244a06e..124e93fa26 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -15,6 +15,7 @@ machine-$(CONFIG_ARCH_ATH79) += ath79
 machine-$(CONFIG_ARCH_BMIPS) += bmips
 machine-$(CONFIG_MACH_PIC32) += pic32
 machine-$(CONFIG_ARCH_MT7620) += mt7620
+machine-$(CONFIG_ARCH_MSCC) += mscc
 
 machdirs := $(patsubst %,arch/mips/mach-%/,$(machine-y))
 libs-y += $(machdirs)
diff --git a/arch/mips/mach-mscc/Kconfig b/arch/mips/mach-mscc/Kconfig
new file mode 100644
index 0000000000..7f1b270207
--- /dev/null
+++ b/arch/mips/mach-mscc/Kconfig
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+menu "MSCC VCore-III platforms"
+	depends on ARCH_MSCC
+
+config SOC_VCOREIII
+	select MIPS_TUNE_24KC
+	select ROM_EXCEPTION_VECTORS
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select SUPPORTS_CPU_MIPS32_R2
+	select SUPPORTS_LITTLE_ENDIAN
+	bool
+
+config SYS_SOC
+	default "mscc"
+
+config SOC_OCELOT
+	bool
+	select SOC_VCOREIII
+	help
+	  This supports MSCC Ocelot family of SOCs.
+
+config SYS_CONFIG_NAME
+	default "vcoreiii"
+
+choice
+	prompt "Board select"
+
+config TARGET_OCELOT_PCB120
+	bool "MSCC PCB120 Reference Board (aka VSC5635EV)"
+	select SOC_OCELOT
+	help
+	  When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
+	  ocelot_pcb120
+
+config TARGET_OCELOT_PCB123
+	bool "MSCC PCB123 Reference Board (aka VSC7514EV))"
+	select SOC_OCELOT
+	help
+	  When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
+	  ocelot_pcb123
+
+endchoice
+
+choice
+	prompt "DDR type"
+
+config DDRTYPE_H5TQ4G63MFR
+	bool "Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16)"
+
+config DDRTYPE_MT41K256M16
+	bool "Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16)"
+
+config DDRTYPE_H5TQ1G63BFA
+	bool "Hynix H5TQ1G63BFA (1Gbit DDR3, x16)"
+
+config DDRTYPE_MT41J128M16HA
+	bool "Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16)"
+
+config DDRTYPE_MT41K128M16JT
+	bool "Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16)"
+
+config DDRTYPE_MT47H128M8HQ
+	bool "Micron MT47H128M8-3 (1Gbit, DDR-533@CL4 @ 4.80ns 16Mbisx8x8)"
+
+endchoice
+
+endmenu
diff --git a/arch/mips/mach-mscc/Makefile b/arch/mips/mach-mscc/Makefile
new file mode 100644
index 0000000000..d14ec33838
--- /dev/null
+++ b/arch/mips/mach-mscc/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+CFLAGS_cpu.o += -finline-limit=64000
+
+obj-y += cpu.o dram.o reset.o lowlevel_init.o
diff --git a/arch/mips/mach-mscc/cpu.c b/arch/mips/mach-mscc/cpu.c
new file mode 100644
index 0000000000..b503e1407b
--- /dev/null
+++ b/arch/mips/mach-mscc/cpu.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+
+#include <mach/tlb.h>
+#include <mach/ddr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if CONFIG_SYS_SDRAM_SIZE <= SZ_64M
+#define MSCC_RAM_TLB_SIZE   SZ_64M
+#define MSCC_ATTRIB2   MMU_REGIO_INVAL
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_128M
+#define MSCC_RAM_TLB_SIZE   SZ_64M
+#define MSCC_ATTRIB2   MMU_REGIO_RW
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_256M
+#define MSCC_RAM_TLB_SIZE   SZ_256M
+#define MSCC_ATTRIB2   MMU_REGIO_INVAL
+#elif CONFIG_SYS_SDRAM_SIZE <= SZ_512M
+#define MSCC_RAM_TLB_SIZE   SZ_256M
+#define MSCC_ATTRIB2   MMU_REGIO_RW
+#else
+#define MSCC_RAM_TLB_SIZE   SZ_512M
+#define MSCC_ATTRIB2   MMU_REGIO_RW
+#endif
+
+/* NOTE: lowlevel_init() function does not have access to the
+ * stack. Thus, all called functions must be inlined, and (any) local
+ * variables must be kept in registers.
+ */
+void vcoreiii_tlb_init(void)
+{
+	register int tlbix = 0;
+
+	/*
+	 * Unlike most of the MIPS based SoCs, the IO register address
+	 * are not in KSEG0. The mainline linux kernel built in legacy
+	 * mode needs to access some of the registers very early in
+	 * the boot and make the assumption that the bootloader has
+	 * already configured them, so we have to match this
+	 * expectation.
+	 */
+	create_tlb(tlbix++, MSCC_IO_ORIGIN1_OFFSET, SZ_16M, MMU_REGIO_RW,
+		   MMU_REGIO_RW);
+
+#if  CONFIG_SYS_TEXT_BASE == MSCC_FLASH_TO
+	/*
+	 * If U-Boot is located in NOR then we want to be able to use
+	 * the data cache in order to boot in a decent duration
+	 */
+	create_tlb(tlbix++, MSCC_FLASH_TO, SZ_16M, MMU_REGIO_RO_C,
+		   MMU_REGIO_RO_C);
+	create_tlb(tlbix++, MSCC_FLASH_TO + SZ_32M, SZ_16M, MMU_REGIO_RO_C,
+		   MMU_REGIO_RO_C);
+
+	/*
+	 * Using cache for RAM also helps to improve boot time. Thanks
+	 * to this the time to relocate U-Boot in RAM went from 2.092
+	 * secs to 0.104 secs.
+	 */
+	create_tlb(tlbix++, MSCC_DDR_TO, MSCC_RAM_TLB_SIZE, MMU_REGIO_RW,
+		   MSCC_ATTRIB2);
+
+	/* Enable caches by clearing the bit ERL, which is set on reset */
+	write_c0_status(read_c0_status() & ~BIT(2));
+#endif /* CONFIG_SYS_TEXT_BASE */
+}
+
+int mach_cpu_init(void)
+{
+	/* Speed up NOR flash access */
+	writel(ICPU_SPI_MST_CFG_CS_DESELECT_TIME(0x19) +
+	       ICPU_SPI_MST_CFG_CLK_DIV(9), BASE_CFG + ICPU_SPI_MST_CFG);
+	/*
+	 * Legacy and mainline linux kernel expect that the
+	 * interruption map was set as it was done by redboot.
+	 */
+	writel(~0, BASE_CFG + ICPU_DST_INTR_MAP(0));
+	writel(0, BASE_CFG + ICPU_DST_INTR_MAP(1));
+	writel(0, BASE_CFG + ICPU_DST_INTR_MAP(2));
+	writel(0, BASE_CFG + ICPU_DST_INTR_MAP(3));
+
+	return 0;
+}
diff --git a/arch/mips/mach-mscc/dram.c b/arch/mips/mach-mscc/dram.c
new file mode 100644
index 0000000000..5acee6f918
--- /dev/null
+++ b/arch/mips/mach-mscc/dram.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/io.h>
+#include <asm/types.h>
+
+#include <mach/tlb.h>
+#include <mach/ddr.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline int vcoreiii_train_bytelane(void)
+{
+	int ret;
+
+	ret = hal_vcoreiii_train_bytelane(0);
+
+	if (ret)
+		return ret;
+	ret = hal_vcoreiii_train_bytelane(1);
+
+	return ret;
+}
+
+int vcoreiii_ddr_init(void)
+{
+	int res;
+
+	if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT)
+	      & ICPU_MEMCTRL_STAT_INIT_DONE)) {
+		hal_vcoreiii_init_memctl();
+		hal_vcoreiii_wait_memctl();
+		if (hal_vcoreiii_init_dqs() || vcoreiii_train_bytelane())
+			hal_vcoreiii_ddr_failed();
+	}
+#if (CONFIG_SYS_TEXT_BASE != 0x20000000)
+	res = dram_check();
+	if (res == 0)
+		hal_vcoreiii_ddr_verified();
+	else
+		hal_vcoreiii_ddr_failed();
+
+	/* Clear boot-mode and read-back to activate/verify */
+	clrbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
+		     ICPU_GENERAL_CTRL_BOOT_MODE_ENA);
+	readl(BASE_CFG + ICPU_GENERAL_CTRL);
+#else
+	res = 0;
+#endif
+	return res;
+}
+
+int print_cpuinfo(void)
+{
+	printf("MSCC VCore-III MIPS 24Kec\n");
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	while (vcoreiii_ddr_init())
+		;
+
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	return 0;
+}
diff --git a/arch/mips/mach-mscc/include/ioremap.h b/arch/mips/mach-mscc/include/ioremap.h
new file mode 100644
index 0000000000..9024364a57
--- /dev/null
+++ b/arch/mips/mach-mscc/include/ioremap.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_MSCC_IOREMAP_H
+#define __ASM_MACH_MSCC_IOREMAP_H
+
+#include <linux/types.h>
+#include <mach/common.h>
+
+/*
+ * Allow physical addresses to be fixed up to help peripherals located
+ * outside the low 32-bit range -- generic pass-through version.
+ */
+static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr,
+					     phys_addr_t size)
+{
+	return phys_addr;
+}
+
+static inline int is_vcoreiii_internal_registers(phys_addr_t offset)
+{
+	if ((offset >= MSCC_IO_ORIGIN1_OFFSET &&
+	     offset < (MSCC_IO_ORIGIN1_OFFSET + MSCC_IO_ORIGIN1_SIZE)) ||
+	    (offset >= MSCC_IO_ORIGIN2_OFFSET &&
+	     offset < (MSCC_IO_ORIGIN2_OFFSET + MSCC_IO_ORIGIN2_SIZE)))
+		return 1;
+
+	return 0;
+}
+
+static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
+					 unsigned long flags)
+{
+	if (is_vcoreiii_internal_registers(offset))
+		return (void __iomem *)offset;
+
+	return NULL;
+}
+
+static inline int plat_iounmap(const volatile void __iomem *addr)
+{
+	return is_vcoreiii_internal_registers((unsigned long)addr);
+}
+
+#define _page_cachable_default	_CACHE_CACHABLE_NONCOHERENT
+
+#endif				/* __ASM_MACH_MSCC_IOREMAP_H */
diff --git a/arch/mips/mach-mscc/include/mach/common.h b/arch/mips/mach-mscc/include/mach/common.h
new file mode 100644
index 0000000000..842462aeed
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/common.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_COMMON_H
+#define __ASM_MACH_COMMON_H
+
+#if defined(CONFIG_SOC_OCELOT)
+#include <mach/ocelot/ocelot.h>
+#include <mach/ocelot/ocelot_devcpu_gcb.h>
+#include <mach/ocelot/ocelot_icpu_cfg.h>
+#else
+#error Unsupported platform
+#endif
+
+#define MSCC_DDR_TO	0x20000000	/* DDR RAM base offset */
+#define MSCC_MEMCTL1_TO	0x40000000	/* SPI/PI base offset */
+#define MSCC_MEMCTL2_TO	0x50000000	/* SPI/PI base offset */
+#define MSCC_FLASH_TO	MSCC_MEMCTL1_TO	/* Flash base offset */
+
+#define VCOREIII_TIMER_DIVIDER 25	/* Clock tick ~ 0.1 us */
+
+#endif				/* __ASM_MACH_COMMON_H */
diff --git a/arch/mips/mach-mscc/include/mach/ddr.h b/arch/mips/mach-mscc/include/mach/ddr.h
new file mode 100644
index 0000000000..262985c8c9
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/ddr.h
@@ -0,0 +1,708 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_DDR_H
+#define __ASM_MACH_DDR_H
+
+#include <asm/cacheops.h>
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <mach/common.h>
+
+#define MIPS_VCOREIII_MEMORY_DDR3
+#define MIPS_VCOREIII_DDR_SIZE CONFIG_SYS_SDRAM_SIZE
+
+#if defined(CONFIG_DDRTYPE_H5TQ1G63BFA)	/* Serval1 Refboard */
+
+/* Hynix H5TQ1G63BFA (1Gbit DDR3, x16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     13
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            2437
+#define VC3_MPAR_tRAS_min         12
+#define VC3_MPAR_CL               6
+#define VC3_MPAR_tWTR             4
+#define VC3_MPAR_tRC              16
+#define VC3_MPR_tFAW             16
+#define VC3_MPAR_tRP              5
+#define VC3_MPAR_tRRD             4
+#define VC3_MPAR_tRCD             5
+#define VC3_MPAR_tMRD             4
+#define VC3_MPAR_tRFC             35
+#define VC3_MPAR_CWL              5
+#define VC3_MPAR_tXPR             38
+#define VC3_MPAR_tMOD             12
+#define VC3_MPAR_tDLLK            512
+#define VC3_MPAR_tWR              5
+
+#elif defined(CONFIG_DDRTYPE_MT41J128M16HA)	/* Validation board */
+
+/* Micron MT41J128M16HA-15E:D (2Gbit DDR3, x16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     14
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            2437
+#define VC3_MPAR_tRAS_min         12
+#define VC3_MPAR_CL               5
+#define VC3_MPAR_tWTR             4
+#define VC3_MPAR_tRC              16
+#define VC3_MPAR_tFAW             16
+#define VC3_MPAR_tRP              5
+#define VC3_MPAR_tRRD             4
+#define VC3_MPAR_tRCD             5
+#define VC3_MPAR_tMRD             4
+#define VC3_MPAR_tRFC             50
+#define VC3_MPAR_CWL              5
+#define VC3_MPAR_tXPR             54
+#define VC3_MPAR_tMOD             12
+#define VC3_MPAR_tDLLK            512
+#define VC3_MPAR_tWR              5
+
+#elif defined(CONFIG_DDRTYPE_MT41K256M16)	/* JR2 Validation board */
+
+/* Micron MT41K256M16 (4Gbit, DDR3L-800, 256Mbitx16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     15
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            2437
+#define VC3_MPAR_tRAS_min         12
+#define VC3_MPAR_CL               5
+#define VC3_MPAR_tWTR             4
+#define VC3_MPAR_tRC              16
+#define VC3_MPAR_tFAW             16
+#define VC3_MPAR_tRP              5
+#define VC3_MPAR_tRRD             4
+#define VC3_MPAR_tRCD             5
+#define VC3_MPAR_tMRD             4
+#define VC3_MPAR_tRFC             82
+#define VC3_MPAR_CWL              5
+#define VC3_MPAR_tXPR             85
+#define VC3_MPAR_tMOD             12
+#define VC3_MPAR_tDLLK            512
+#define VC3_MPAR_tWR              5
+
+#elif defined(CONFIG_DDRTYPE_H5TQ4G63MFR)	/* JR2 Reference board */
+
+/* Hynix H5TQ4G63MFR-PBC (4Gbit, DDR3-800, 256Mbitx16) - 2kb pages @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     15
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            2437
+#define VC3_MPAR_tRAS_min         12
+#define VC3_MPAR_CL               6
+#define VC3_MPAR_tWTR             4
+#define VC3_MPAR_tRC              17
+#define VC3_MPAR_tFAW             16
+#define VC3_MPAR_tRP              5
+#define VC3_MPAR_tRRD             4
+#define VC3_MPAR_tRCD             5
+#define VC3_MPAR_tMRD             4
+#define VC3_MPAR_tRFC             82
+#define VC3_MPAR_CWL              5
+#define VC3_MPAR_tXPR             85
+#define VC3_MPAR_tMOD             12
+#define VC3_MPAR_tDLLK            512
+#define VC3_MPAR_tWR              5
+
+#elif defined(CONFIG_DDRTYPE_MT41K128M16JT)
+
+/* Micron Micron MT41K128M16JT-125 (2Gbit DDR3L, 128Mbitx16) @ 3.20ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     14
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            2437
+#define VC3_MPAR_tRAS_min         12
+#define VC3_MPAR_CL               6
+#define VC3_MPAR_tWTR             4
+#define VC3_MPAR_tRC              16
+#define VC3_MPAR_tFAW             16
+#define VC3_MPAR_tRP              5
+#define VC3_MPAR_tRRD             4
+#define VC3_MPAR_tRCD             5
+#define VC3_MPAR_tMRD             4
+#define VC3_MPAR_tRFC             82
+#define VC3_MPAR_CWL              5
+#define VC3_MPAR_tXPR             85
+#define VC3_MPAR_tMOD             12
+#define VC3_MPAR_tDLLK            512
+#define VC3_MPAR_tWR              5
+
+#elif defined(CONFIG_DDRTYPE_MT47H128M8HQ)	/* Luton10/26 Refboards */
+
+/* Micron 1Gb MT47H128M8-3 16Meg x 8 x 8 banks, DDR-533@CL4 @ 4.80ns */
+#define VC3_MPAR_bank_addr_cnt    3
+#define VC3_MPAR_row_addr_cnt     14
+#define VC3_MPAR_col_addr_cnt     10
+#define VC3_MPAR_tREFI            1625
+#define VC3_MPAR_tRAS_min         9
+#define VC3_MPAR_CL               4
+#define VC3_MPAR_tWTR             2
+#define VC3_MPAR_tRC              12
+#define VC3_MPAR_tFAW             8
+#define VC3_MPAR_tRP              4
+#define VC3_MPAR_tRRD             2
+#define VC3_MPAR_tRCD             4
+
+#define VC3_MPAR_tRPA             4
+#define VC3_MPAR_tRP              4
+
+#define VC3_MPAR_tMRD             2
+#define VC3_MPAR_tRFC             27
+
+#define VC3_MPAR__400_ns_dly      84
+
+#define VC3_MPAR_tWR              4
+#undef MIPS_VCOREIII_MEMORY_DDR3
+#else
+
+#error Unknown DDR system configuration - please add!
+
+#endif
+
+#ifdef CONFIG_SOC_OCELOT
+#define MIPS_VCOREIII_MEMORY_16BIT 1
+#endif
+
+#define MIPS_VCOREIII_MEMORY_SSTL_ODT 7
+#define MIPS_VCOREIII_MEMORY_SSTL_DRIVE 7
+#define VCOREIII_DDR_DQS_MODE_CALIBRATE
+
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_16BIT       1
+#else
+#define VC3_MPAR_16BIT       0
+#endif
+
+#ifdef MIPS_VCOREIII_MEMORY_DDR3
+#define VC3_MPAR_DDR3_MODE    1	/* DDR3 */
+#define VC3_MPAR_BURST_LENGTH 8	/* Always 8 (1) for DDR3 */
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_BURST_SIZE   1	/* Always 1 for DDR3/16bit */
+#else
+#define VC3_MPAR_BURST_SIZE   0
+#endif
+#else
+#define VC3_MPAR_DDR3_MODE    0	/* DDR2 */
+#ifdef MIPS_VCOREIII_MEMORY_16BIT
+#define VC3_MPAR_BURST_LENGTH 4	/* in DDR2 16-bit mode, use burstlen 4 */
+#else
+#define VC3_MPAR_BURST_LENGTH 8	/* For 8-bit IF we must run burst-8 */
+#endif
+#define VC3_MPAR_BURST_SIZE   0	/* Always 0 for DDR2 */
+#endif
+
+#define VC3_MPAR_RL VC3_MPAR_CL
+#if !defined(MIPS_VCOREIII_MEMORY_DDR3)
+#define VC3_MPAR_WL (VC3_MPAR_RL - 1)
+#define VC3_MPAR_MD VC3_MPAR_tMRD
+#define VC3_MPAR_ID VC3_MPAR__400_ns_dly
+#define VC3_MPAR_SD VC3_MPAR_tXSRD
+#define VC3_MPAR_OW (VC3_MPAR_WL - 2)
+#define VC3_MPAR_OR (VC3_MPAR_WL - 3)
+#define VC3_MPAR_RP (VC3_MPAR_bank_addr_cnt < 3 ? VC3_MPAR_tRP : VC3_MPAR_tRPA)
+#define VC3_MPAR_FAW (VC3_MPAR_bank_addr_cnt < 3 ? 1 : VC3_MPAR_tFAW)
+#define VC3_MPAR_BL (VC3_MPAR_BURST_LENGTH == 4 ? 2 : 4)
+#define MSCC_MEMPARM_MR0 \
+	(VC3_MPAR_BURST_LENGTH == 8 ? 3 : 2) | (VC3_MPAR_CL << 4) | \
+	((VC3_MPAR_tWR - 1) << 9)
+/* DLL-on, Full-OD, AL=0, RTT=off, nDQS-on, RDQS-off, out-en */
+#define MSCC_MEMPARM_MR1 0x382
+#define MSCC_MEMPARM_MR2 0
+#define MSCC_MEMPARM_MR3 0
+#else
+#define VC3_MPAR_WL VC3_MPAR_CWL
+#define VC3_MPAR_MD VC3_MPAR_tMOD
+#define VC3_MPAR_ID VC3_MPAR_tXPR
+#define VC3_MPAR_SD VC3_MPAR_tDLLK
+#define VC3_MPAR_OW 2
+#define VC3_MPAR_OR 2
+#define VC3_MPAR_RP VC3_MPAR_tRP
+#define VC3_MPAR_FAW VC3_MPAR_tFAW
+#define VC3_MPAR_BL 4
+#define MSCC_MEMPARM_MR0 ((VC3_MPAR_RL - 4) << 4) | ((VC3_MPAR_tWR - 4) << 9)
+/* ODT_RTT: “0x0040” for 120ohm, and “0x0004” for 60ohm. */
+#define MSCC_MEMPARM_MR1 0x0040
+#define MSCC_MEMPARM_MR2 ((VC3_MPAR_WL - 5) << 3)
+#define MSCC_MEMPARM_MR3 0
+#endif				/* MIPS_VCOREIII_MEMORY_DDR3 */
+
+#define MSCC_MEMPARM_MEMCFG                                             \
+	((MIPS_VCOREIII_DDR_SIZE > SZ_512M) ?				\
+	 ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS : 0) |			\
+	(VC3_MPAR_16BIT ? ICPU_MEMCTRL_CFG_DDR_WIDTH : 0) |		\
+	(VC3_MPAR_DDR3_MODE ? ICPU_MEMCTRL_CFG_DDR_MODE : 0) |		\
+	(VC3_MPAR_BURST_SIZE ? ICPU_MEMCTRL_CFG_BURST_SIZE : 0) |	\
+	(VC3_MPAR_BURST_LENGTH == 8 ? ICPU_MEMCTRL_CFG_BURST_LEN : 0) | \
+	(VC3_MPAR_bank_addr_cnt == 3 ? ICPU_MEMCTRL_CFG_BANK_CNT : 0) | \
+	ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(VC3_MPAR_row_addr_cnt - 1) |	\
+	ICPU_MEMCTRL_CFG_MSB_COL_ADDR(VC3_MPAR_col_addr_cnt - 1)
+
+#ifdef CONFIG_SOC_OCELOT
+#define MSCC_MEMPARM_PERIOD					\
+	ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(8) |		\
+	ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI)
+
+#define MSCC_MEMPARM_TIMING0                                            \
+	ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(VC3_MPAR_RL + VC3_MPAR_BL + 1 - \
+					  VC3_MPAR_WL) |		\
+	ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(VC3_MPAR_BL - 1) |	\
+	ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(VC3_MPAR_BL) |		\
+	ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) |	\
+	ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_WL +		\
+					     VC3_MPAR_BL +		\
+					     VC3_MPAR_tWR - 1) |	\
+	ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BL - 1) |		\
+		ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_WL - 1) |	\
+	ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_RL - 3)
+
+#define MSCC_MEMPARM_TIMING1                                            \
+	ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \
+	ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_FAW - 1) |		\
+	ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_RP - 1) |	\
+	ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) |	\
+	ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) |	\
+	ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_WL +			\
+					  VC3_MPAR_BL +			\
+					  VC3_MPAR_tWTR - 1)
+
+#define MSCC_MEMPARM_TIMING2					\
+	ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_RP - 1) |	\
+	ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_MD - 1) |		\
+	ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) |		\
+	ICPU_MEMCTRL_TIMING2_INIT_DLY(VC3_MPAR_ID - 1)
+
+#define MSCC_MEMPARM_TIMING3						\
+	ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_WL +	\
+						    VC3_MPAR_tWTR - 1) |\
+	ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(VC3_MPAR_OR - 1) |		\
+	ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_OW - 1) |		\
+	ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_RL - 3)
+
+#else
+#define MSCC_MEMPARM_PERIOD					\
+	ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(1) |		\
+	ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(VC3_MPAR_tREFI)
+
+#define MSCC_MEMPARM_TIMING0                                            \
+	ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(VC3_MPAR_tRAS_min - 1) |	\
+	ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(VC3_MPAR_CL +		\
+					     (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \
+					     VC3_MPAR_tWR) |		\
+	ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(VC3_MPAR_BURST_LENGTH == 8 ? 3 : 1) | \
+	ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(VC3_MPAR_CL - 3) |		\
+	ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(VC3_MPAR_CL - 3)
+
+#define MSCC_MEMPARM_TIMING1                                            \
+	ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(VC3_MPAR_tRC - 1) | \
+	ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(VC3_MPAR_tFAW - 1) |		\
+	ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(VC3_MPAR_tRP - 1) |	\
+	ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(VC3_MPAR_tRRD - 1) |	\
+	ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(VC3_MPAR_tRCD - 1) |	\
+	ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(VC3_MPAR_CL +			\
+					  (VC3_MPAR_BURST_LENGTH == 8 ? 2 : 0) + \
+					  VC3_MPAR_tWTR)
+#define MSCC_MEMPARM_TIMING2                                            \
+	ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(VC3_MPAR_tRPA - 1) |		\
+	ICPU_MEMCTRL_TIMING2_MDSET_DLY(VC3_MPAR_tMRD - 1) |		\
+	ICPU_MEMCTRL_TIMING2_REF_DLY(VC3_MPAR_tRFC - 1) |		\
+	ICPU_MEMCTRL_TIMING2_FOUR_HUNDRED_NS_DLY(VC3_MPAR__400_ns_dly)
+
+#define MSCC_MEMPARM_TIMING3						\
+	ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(VC3_MPAR_CL - 1) |	\
+	ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(VC3_MPAR_CL - 1) |		\
+	ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(VC3_MPAR_CL - 1)
+
+#endif
+
+enum {
+	DDR_TRAIN_OK,
+	DDR_TRAIN_CONTINUE,
+	DDR_TRAIN_ERROR,
+};
+
+/*
+ * We actually have very few 'pause' possibilities apart from
+ * these assembly nops (at this very early stage).
+ */
+#define PAUSE() asm volatile("nop; nop; nop; nop; nop; nop; nop; nop")
+
+/* NB: Assumes inlining as no stack is available! */
+static inline void set_dly(u32 bytelane, u32 dly)
+{
+	register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+
+	r &= ~ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M;
+	r |= ICPU_MEMCTRL_DQS_DLY_DQS_DLY(dly);
+	writel(r, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+}
+
+static inline bool incr_dly(u32 bytelane)
+{
+	register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+
+	if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) {
+		writel(r + 1, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+		return true;
+	}
+
+	return false;
+}
+
+static inline bool adjust_dly(int adjust)
+{
+	register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0));
+
+	if (ICPU_MEMCTRL_DQS_DLY_DQS_DLY(r) < 31) {
+		writel(r + adjust, BASE_CFG + ICPU_MEMCTRL_DQS_DLY(0));
+		return true;
+	}
+
+	return false;
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline void center_dly(u32 bytelane, u32 start)
+{
+	register u32 r = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane)) - start;
+
+	writel(start + (r >> 1), BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+}
+
+static inline void memphy_soft_reset(void)
+{
+	setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST);
+	PAUSE();
+	clrbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_FIFO_RST);
+	PAUSE();
+}
+
+#ifdef CONFIG_SOC_OCELOT
+static u8 training_data[] = { 0xfe, 0x11, 0x33, 0x55, 0x77, 0x99, 0xbb, 0xdd };
+
+static inline void sleep_100ns(u32 val)
+{
+	/* Set the timer tick generator to 100 ns */
+	writel(VCOREIII_TIMER_DIVIDER - 1, BASE_CFG + ICPU_TIMER_TICK_DIV);
+
+	/* Set the timer value */
+	writel(val, BASE_CFG + ICPU_TIMER_VALUE(0));
+
+	/* Enable timer 0 for one-shot */
+	writel(ICPU_TIMER_CTRL_ONE_SHOT_ENA | ICPU_TIMER_CTRL_TIMER_ENA,
+	       BASE_CFG + ICPU_TIMER_CTRL(0));
+
+	/* Wait for timer 0 to reach 0 */
+	while (readl(BASE_CFG + ICPU_TIMER_VALUE(0)) != 0)
+		;
+}
+
+static inline void hal_vcoreiii_ddr_reset_assert(void)
+{
+	/* DDR has reset pin on GPIO 19 toggle Low-High to release */
+	setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+	writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_CLR);
+	sleep_100ns(10000);
+}
+
+static inline void hal_vcoreiii_ddr_reset_release(void)
+{
+	/* DDR has reset pin on GPIO 19 toggle Low-High to release */
+	setbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+	writel(BIT(19), BASE_DEVCPU_GCB + PERF_GPIO_OUT_SET);
+	sleep_100ns(10000);
+}
+
+/*
+ * DDR memory sanity checking failed, tally and do hard reset
+ *
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline void hal_vcoreiii_ddr_failed(void)
+{
+	register u32 reset;
+
+	writel(readl(BASE_CFG + ICPU_GPR(6)) + 1, BASE_CFG + ICPU_GPR(6));
+
+	clrbits_le32(BASE_DEVCPU_GCB + PERF_GPIO_OE, BIT(19));
+
+	/* We have to execute the reset function from cache. Indeed,
+	 * the reboot workaround in _machine_restart() will change the
+	 * SPI NOR into SW bitbang.
+	 *
+	 * This will render the CPU unable to execute directly from
+	 * the NOR, which is why the reset instructions are prefetched
+	 * into the I-cache.
+	 *
+	 * When failing the DDR initialization we are executing from
+	 * NOR.
+	 *
+	 * The last instruction in _machine_restart() will reset the
+	 * MIPS CPU (and the cache), and the CPU will start executing
+	 * from the reset vector.
+	 */
+	reset = KSEG0ADDR(_machine_restart);
+	icache_lock((void *)reset, 128);
+	asm volatile ("jr %0"::"r" (reset));
+
+	panic("DDR init failed\n");
+}
+
+/*
+ * DDR memory sanity checking done, possibly enable ECC.
+ *
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline void hal_vcoreiii_ddr_verified(void)
+{
+#ifdef MIPS_VCOREIII_MEMORY_ECC
+	/* Finally, enable ECC */
+	register u32 val = readl(BASE_CFG + ICPU_MEMCTRL_CFG);
+
+	val |= ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA;
+	val &= ~ICPU_MEMCTRL_CFG_BURST_SIZE;
+
+	writel(val, BASE_CFG + ICPU_MEMCTRL_CFG);
+#endif
+
+	/* Reset Status register - sticky bits */
+	writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT), BASE_CFG + ICPU_MEMCTRL_STAT);
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline int look_for(u32 bytelane)
+{
+	register u32 i;
+
+	/* Reset FIFO in case any previous access failed */
+	for (i = 0; i < sizeof(training_data); i++) {
+		register u32 byte;
+
+		memphy_soft_reset();
+		/* Reset sticky bits */
+		writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+		       BASE_CFG + ICPU_MEMCTRL_STAT);
+		/* Read data */
+		byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane +
+				   (i * 4));
+
+		/*
+		 * Prevent the compiler reordering the instruction so
+		 * the read of RAM happens after the check of the
+		 * errors.
+		 */
+		rmb();
+		if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+		    (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+		     ICPU_MEMCTRL_STAT_RDATA_DUMMY)) {
+			/* Noise on the line */
+			goto read_error;
+		}
+		/* If mismatch, increment DQS - if possible */
+		if (byte != training_data[i]) {
+ read_error:
+			if (!incr_dly(bytelane))
+				return DDR_TRAIN_ERROR;
+			return DDR_TRAIN_CONTINUE;
+		}
+	}
+	return DDR_TRAIN_OK;
+}
+
+/* NB: Assumes inlining as no stack is available! */
+static inline int look_past(u32 bytelane)
+{
+	register u32 i;
+
+	/* Reset FIFO in case any previous access failed */
+	for (i = 0; i < sizeof(training_data); i++) {
+		register u32 byte;
+
+		memphy_soft_reset();
+		/* Ack sticky bits */
+		writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+		       BASE_CFG + ICPU_MEMCTRL_STAT);
+		byte = __raw_readb((void __iomem *)MSCC_DDR_TO + bytelane +
+				   (i * 4));
+		/*
+		 * Prevent the compiler reordering the instruction so
+		 * the read of RAM happens after the check of the
+		 * errors.
+		 */
+		rmb();
+		if (readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+		    (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+		     ICPU_MEMCTRL_STAT_RDATA_DUMMY)) {
+			/* Noise on the line */
+			goto read_error;
+		}
+		/* Bail out when we see first mismatch */
+		if (byte != training_data[i]) {
+ read_error:
+			return DDR_TRAIN_OK;
+		}
+	}
+	/* All data compares OK, increase DQS and retry */
+	if (!incr_dly(bytelane))
+		return DDR_TRAIN_ERROR;
+
+	return DDR_TRAIN_CONTINUE;
+}
+
+static inline int hal_vcoreiii_train_bytelane(u32 bytelane)
+{
+	register int res;
+	register u32 dqs_s;
+
+	set_dly(bytelane, 0);	/* Start training at DQS=0 */
+	while ((res = look_for(bytelane)) == DDR_TRAIN_CONTINUE)
+		;
+	if (res != DDR_TRAIN_OK)
+		return res;
+
+	dqs_s = readl(BASE_CFG + ICPU_MEMCTRL_DQS_DLY(bytelane));
+	while ((res = look_past(bytelane)) == DDR_TRAIN_CONTINUE)
+		;
+	if (res != DDR_TRAIN_OK)
+		return res;
+	/* Reset FIFO - for good measure */
+	memphy_soft_reset();
+	/* Adjust to center [dqs_s;cur] */
+	center_dly(bytelane, dqs_s);
+	return DDR_TRAIN_OK;
+}
+
+/* This algorithm is converted from the TCL training algorithm used
+ * during silicon simulation.
+ * NB: Assumes inlining as no stack is available!
+ */
+static inline int hal_vcoreiii_init_dqs(void)
+{
+#define MAX_DQS 32
+	register u32 i, j;
+
+	for (i = 0; i < MAX_DQS; i++) {
+		set_dly(0, i);	/* Byte-lane 0 */
+		for (j = 0; j < MAX_DQS; j++) {
+			__maybe_unused register u32  byte;
+
+			set_dly(1, j);	/* Byte-lane 1 */
+			/* Reset FIFO in case any previous access failed */
+			memphy_soft_reset();
+			writel(readl(BASE_CFG + ICPU_MEMCTRL_STAT),
+			       BASE_CFG + ICPU_MEMCTRL_STAT);
+			byte = __raw_readb((void __iomem *)MSCC_DDR_TO);
+			byte = __raw_readb((void __iomem *)(MSCC_DDR_TO + 1));
+			if (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT) &
+			    (ICPU_MEMCTRL_STAT_RDATA_MASKED |
+			     ICPU_MEMCTRL_STAT_RDATA_DUMMY)))
+				return 0;
+		}
+	}
+	return -1;
+}
+
+static inline int dram_check(void)
+{
+	register u32 i;
+
+	for (i = 0; i < 8; i++) {
+		__raw_writel(~i, (void __iomem *)(MSCC_DDR_TO + (i * 4)));
+		if (__raw_readl((void __iomem *)(MSCC_DDR_TO + (i * 4))) != ~i)
+			return 1;
+	}
+	return 0;
+}
+
+/*
+ * NB: Called *early* to init memory controller - assumes inlining as
+ * no stack is available!
+ */
+static inline void hal_vcoreiii_init_memctl(void)
+{
+	/* Ensure DDR is in reset */
+	hal_vcoreiii_ddr_reset_assert();
+
+	/* Wait maybe not needed, but ... */
+	PAUSE();
+
+	/* Drop sys ctl memory controller forced reset */
+	clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_MEM_RST_FORCE);
+
+	PAUSE();
+
+	/* Drop Reset, enable SSTL */
+	writel(ICPU_MEMPHY_CFG_PHY_SSTL_ENA, BASE_CFG + ICPU_MEMPHY_CFG);
+	PAUSE();
+
+	/* Start the automatic SSTL output and ODT drive-strength calibration */
+	writel(ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(MIPS_VCOREIII_MEMORY_SSTL_ODT) |
+	       /* drive strength */
+	       ICPU_MEMPHY_ZCAL_ZCAL_PROG(MIPS_VCOREIII_MEMORY_SSTL_DRIVE) |
+	       /* Start calibration process */
+	       ICPU_MEMPHY_ZCAL_ZCAL_ENA, BASE_CFG + ICPU_MEMPHY_ZCAL);
+
+	/* Wait for ZCAL to clear */
+	while (readl(BASE_CFG + ICPU_MEMPHY_ZCAL) & ICPU_MEMPHY_ZCAL_ZCAL_ENA)
+		;
+
+	/* Check no ZCAL_ERR */
+	if (readl(BASE_CFG + ICPU_MEMPHY_ZCAL_STAT)
+	    & ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR)
+		hal_vcoreiii_ddr_failed();
+
+	/* Drive CL, CK, ODT */
+	setbits_le32(BASE_CFG + ICPU_MEMPHY_CFG, ICPU_MEMPHY_CFG_PHY_ODT_OE |
+		     ICPU_MEMPHY_CFG_PHY_CK_OE | ICPU_MEMPHY_CFG_PHY_CL_OE);
+
+	/* Initialize memory controller */
+	writel(MSCC_MEMPARM_MEMCFG, BASE_CFG + ICPU_MEMCTRL_CFG);
+	writel(MSCC_MEMPARM_PERIOD, BASE_CFG + ICPU_MEMCTRL_REF_PERIOD);
+
+	writel(MSCC_MEMPARM_TIMING0, BASE_CFG + ICPU_MEMCTRL_TIMING0);
+
+	writel(MSCC_MEMPARM_TIMING1, BASE_CFG + ICPU_MEMCTRL_TIMING1);
+	writel(MSCC_MEMPARM_TIMING2, BASE_CFG + ICPU_MEMCTRL_TIMING2);
+	writel(MSCC_MEMPARM_TIMING3, BASE_CFG + ICPU_MEMCTRL_TIMING3);
+	writel(MSCC_MEMPARM_MR0, BASE_CFG + ICPU_MEMCTRL_MR0_VAL);
+	writel(MSCC_MEMPARM_MR1, BASE_CFG + ICPU_MEMCTRL_MR1_VAL);
+	writel(MSCC_MEMPARM_MR2, BASE_CFG + ICPU_MEMCTRL_MR2_VAL);
+	writel(MSCC_MEMPARM_MR3, BASE_CFG + ICPU_MEMCTRL_MR3_VAL);
+
+	/* Termination setup - enable ODT */
+	writel(ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA |
+	       /* Assert ODT0 for any write */
+	       ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(3),
+	       BASE_CFG + ICPU_MEMCTRL_TERMRES_CTRL);
+
+	/* Release Reset from DDR */
+	hal_vcoreiii_ddr_reset_release();
+
+	writel(readl(BASE_CFG + ICPU_GPR(7)) + 1, BASE_CFG + ICPU_GPR(7));
+}
+
+static inline void hal_vcoreiii_wait_memctl(void)
+{
+	/* Now, rip it! */
+	writel(ICPU_MEMCTRL_CTRL_INITIALIZE, BASE_CFG + ICPU_MEMCTRL_CTRL);
+
+	while (!(readl(BASE_CFG + ICPU_MEMCTRL_STAT)
+		 & ICPU_MEMCTRL_STAT_INIT_DONE))
+		;
+
+	/* Settle...? */
+	sleep_100ns(10000);
+
+	/* Establish data contents in DDR RAM for training */
+
+	__raw_writel(0xcacafefe, ((void __iomem *)MSCC_DDR_TO));
+	__raw_writel(0x22221111, ((void __iomem *)MSCC_DDR_TO + 0x4));
+	__raw_writel(0x44443333, ((void __iomem *)MSCC_DDR_TO + 0x8));
+	__raw_writel(0x66665555, ((void __iomem *)MSCC_DDR_TO + 0xC));
+	__raw_writel(0x88887777, ((void __iomem *)MSCC_DDR_TO + 0x10));
+	__raw_writel(0xaaaa9999, ((void __iomem *)MSCC_DDR_TO + 0x14));
+	__raw_writel(0xccccbbbb, ((void __iomem *)MSCC_DDR_TO + 0x18));
+	__raw_writel(0xeeeedddd, ((void __iomem *)MSCC_DDR_TO + 0x1C));
+}
+#endif				/* __ASM_MACH_DDR_H */
diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h
new file mode 100644
index 0000000000..2cb2135d37
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Microsemi Ocelot Switch driver
+ *
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_H_
+#define _MSCC_OCELOT_H_
+
+#include <linux/bitops.h>
+#include <dm.h>
+
+/*
+ * Target offset base(s)
+ */
+#define MSCC_IO_ORIGIN1_OFFSET 0x70000000
+#define MSCC_IO_ORIGIN1_SIZE   0x00200000
+#define MSCC_IO_ORIGIN2_OFFSET 0x71000000
+#define MSCC_IO_ORIGIN2_SIZE   0x01000000
+#define BASE_CFG        ((void __iomem *)0x70000000)
+#define BASE_DEVCPU_GCB ((void __iomem *)0x71070000)
+
+#endif
diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
new file mode 100644
index 0000000000..f8aa97ba26
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_DEVCPU_GCB_H_
+#define _MSCC_OCELOT_DEVCPU_GCB_H_
+
+#define PERF_SOFT_RST                                     0x8
+
+#define PERF_SOFT_RST_SOFT_NON_CFG_RST                    BIT(2)
+#define PERF_SOFT_RST_SOFT_SWC_RST                        BIT(1)
+#define PERF_SOFT_RST_SOFT_CHIP_RST                       BIT(0)
+
+#define PERF_GPIO_OUT_SET                                 0x34
+
+#define PERF_GPIO_OUT_CLR                                 0x38
+
+#define PERF_GPIO_OE                                      0x44
+
+#endif
diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h
new file mode 100644
index 0000000000..04cf70bec3
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_icpu_cfg.h
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef _MSCC_OCELOT_ICPU_CFG_H_
+#define _MSCC_OCELOT_ICPU_CFG_H_
+
+#define ICPU_GPR(x) (0x4 * (x))
+#define ICPU_GPR_RSZ                                      0x4
+
+#define ICPU_RESET                                        0x20
+
+#define ICPU_RESET_CORE_RST_CPU_ONLY                      BIT(3)
+#define ICPU_RESET_CORE_RST_PROTECT                       BIT(2)
+#define ICPU_RESET_CORE_RST_FORCE                         BIT(1)
+#define ICPU_RESET_MEM_RST_FORCE                          BIT(0)
+
+#define ICPU_GENERAL_CTRL                                 0x24
+
+#define ICPU_GENERAL_CTRL_CPU_BUSIF_SLEEP_DIS             BIT(14)
+#define ICPU_GENERAL_CTRL_CPU_BUSIF_WERR_ENA              BIT(13)
+#define ICPU_GENERAL_CTRL_CPU_8051_IROM_ENA               BIT(12)
+#define ICPU_GENERAL_CTRL_CPU_MIPS_DIS                    BIT(11)
+#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ADDR_SEL            BIT(10)
+#define ICPU_GENERAL_CTRL_IF_MIIM_SLV_ENA                 BIT(9)
+#define ICPU_GENERAL_CTRL_IF_PI_SLV_DONEPOL               BIT(8)
+#define ICPU_GENERAL_CTRL_IF_PI_MST_ENA                   BIT(7)
+#define ICPU_GENERAL_CTRL_IF_PI_SLV_ENA                   BIT(6)
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER(x)                  (((x) << 4) & GENMASK(5, 4))
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER_M                   GENMASK(5, 4)
+#define ICPU_GENERAL_CTRL_IF_SI_OWNER_X(x)                (((x) & GENMASK(5, 4)) >> 4)
+#define ICPU_GENERAL_CTRL_SSI_MST_CONTENTION              BIT(3)
+#define ICPU_GENERAL_CTRL_CPU_BE_ENA                      BIT(2)
+#define ICPU_GENERAL_CTRL_CPU_DIS                         BIT(1)
+#define ICPU_GENERAL_CTRL_BOOT_MODE_ENA                   BIT(0)
+#define ICPU_SPI_MST_CFG                                  0x3c
+
+#define ICPU_SPI_MST_CFG_A32B_ENA                         BIT(11)
+#define ICPU_SPI_MST_CFG_FAST_READ_ENA                    BIT(10)
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME(x)              (((x) << 5) & GENMASK(9, 5))
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_M               GENMASK(9, 5)
+#define ICPU_SPI_MST_CFG_CS_DESELECT_TIME_X(x)            (((x) & GENMASK(9, 5)) >> 5)
+#define ICPU_SPI_MST_CFG_CLK_DIV(x)                       ((x) & GENMASK(4, 0))
+#define ICPU_SPI_MST_CFG_CLK_DIV_M                        GENMASK(4, 0)
+
+#define ICPU_SW_MODE                                      0x50
+
+#define ICPU_SW_MODE_SW_PIN_CTRL_MODE                     BIT(13)
+#define ICPU_SW_MODE_SW_SPI_SCK                           BIT(12)
+#define ICPU_SW_MODE_SW_SPI_SCK_OE                        BIT(11)
+#define ICPU_SW_MODE_SW_SPI_SDO                           BIT(10)
+#define ICPU_SW_MODE_SW_SPI_SDO_OE                        BIT(9)
+#define ICPU_SW_MODE_SW_SPI_CS(x)                         (((x) << 5) & GENMASK(8, 5))
+#define ICPU_SW_MODE_SW_SPI_CS_M                          GENMASK(8, 5)
+#define ICPU_SW_MODE_SW_SPI_CS_X(x)                       (((x) & GENMASK(8, 5)) >> 5)
+#define ICPU_SW_MODE_SW_SPI_CS_OE(x)                      (((x) << 1) & GENMASK(4, 1))
+#define ICPU_SW_MODE_SW_SPI_CS_OE_M                       GENMASK(4, 1)
+#define ICPU_SW_MODE_SW_SPI_CS_OE_X(x)                    (((x) & GENMASK(4, 1)) >> 1)
+#define ICPU_SW_MODE_SW_SPI_SDI                           BIT(0)
+
+#define ICPU_INTR_ENA					  0x88
+
+#define ICPU_DST_INTR_MAP(x)  (0x98 + 0x4 * (x))
+#define ICPU_DST_INTR_MAP_RSZ                             0x4
+
+#define ICPU_DST_INTR_IDENT                               0xa8
+#define ICPU_DST_INTR_IDENT_RSZ                           0x4
+
+#define ICPU_TIMER_TICK_DIV                               0xe8
+#define ICPU_TIMER_VALUE(x) (0xec + 0x4 * (x))
+
+#define ICPU_TIMER_CTRL(x) (0x104 + 0x4 * (x))
+#define ICPU_TIMER_CTRL_MAX_FREQ_ENA			  BIT(3)
+#define ICPU_TIMER_CTRL_ONE_SHOT_ENA			  BIT(2)
+#define ICPU_TIMER_CTRL_TIMER_ENA			  BIT(1)
+#define ICPU_TIMER_CTRL_FORCE_RELOAD			  BIT(0)
+
+#define ICPU_MEMCTRL_CTRL                                 0x110
+#define ICPU_MEMCTRL_CTRL_PWR_DOWN                        BIT(3)
+#define ICPU_MEMCTRL_CTRL_MDSET                           BIT(2)
+#define ICPU_MEMCTRL_CTRL_STALL_REF_ENA                   BIT(1)
+#define ICPU_MEMCTRL_CTRL_INITIALIZE                      BIT(0)
+
+#define ICPU_MEMCTRL_CFG                                  0x114
+
+#define ICPU_MEMCTRL_CFG_DDR_512MBYTE_PLUS                BIT(16)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_ERR_ENA                  BIT(15)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_COR_ENA                  BIT(14)
+#define ICPU_MEMCTRL_CFG_DDR_ECC_ENA                      BIT(13)
+#define ICPU_MEMCTRL_CFG_DDR_WIDTH                        BIT(12)
+#define ICPU_MEMCTRL_CFG_DDR_MODE                         BIT(11)
+#define ICPU_MEMCTRL_CFG_BURST_SIZE                       BIT(10)
+#define ICPU_MEMCTRL_CFG_BURST_LEN                        BIT(9)
+#define ICPU_MEMCTRL_CFG_BANK_CNT                         BIT(8)
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR(x)                  (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_M                   GENMASK(7, 4)
+#define ICPU_MEMCTRL_CFG_MSB_ROW_ADDR_X(x)                (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR(x)                  ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_CFG_MSB_COL_ADDR_M                   GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_STAT                                 0x118
+
+#define ICPU_MEMCTRL_STAT_RDATA_MASKED                    BIT(5)
+#define ICPU_MEMCTRL_STAT_RDATA_DUMMY                     BIT(4)
+#define ICPU_MEMCTRL_STAT_RDATA_ECC_ERR                   BIT(3)
+#define ICPU_MEMCTRL_STAT_RDATA_ECC_COR                   BIT(2)
+#define ICPU_MEMCTRL_STAT_PWR_DOWN_ACK                    BIT(1)
+#define ICPU_MEMCTRL_STAT_INIT_DONE                       BIT(0)
+
+#define ICPU_MEMCTRL_REF_PERIOD                           0x11c
+
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF(x)           (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_M            GENMASK(19, 16)
+#define ICPU_MEMCTRL_REF_PERIOD_MAX_PEND_REF_X(x)         (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD(x)             ((x) & GENMASK(15, 0))
+#define ICPU_MEMCTRL_REF_PERIOD_REF_PERIOD_M              GENMASK(15, 0)
+
+#define ICPU_MEMCTRL_TIMING0                              0x124
+
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY(x)              (((x) << 28) & GENMASK(31, 28))
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_M               GENMASK(31, 28)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_WR_DLY_X(x)            (((x) & GENMASK(31, 28)) >> 28)
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY(x)          (((x) << 24) & GENMASK(27, 24))
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_M           GENMASK(27, 24)
+#define ICPU_MEMCTRL_TIMING0_WR_CS_CHANGE_DLY_X(x)        (((x) & GENMASK(27, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY(x)          (((x) << 20) & GENMASK(23, 20))
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_M           GENMASK(23, 20)
+#define ICPU_MEMCTRL_TIMING0_RD_CS_CHANGE_DLY_X(x)        (((x) & GENMASK(23, 20)) >> 20)
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY(x)          (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_M           GENMASK(19, 16)
+#define ICPU_MEMCTRL_TIMING0_RAS_TO_PRECH_DLY_X(x)        (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY(x)           (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_M            GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING0_WR_TO_PRECH_DLY_X(x)         (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY(x)           (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_M            GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING0_RD_TO_PRECH_DLY_X(x)         (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY(x)           (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_M            GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING0_WR_DATA_XFR_DLY_X(x)         (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY(x)           ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING0_RD_DATA_XFR_DLY_M            GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_TIMING1                              0x128
+
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY(x)  (((x) << 24) & GENMASK(31, 24))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_M   GENMASK(31, 24)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_SAME_BANK_DLY_X(x) (((x) & GENMASK(31, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY(x)             (((x) << 16) & GENMASK(23, 16))
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_M              GENMASK(23, 16)
+#define ICPU_MEMCTRL_TIMING1_BANK8_FAW_DLY_X(x)           (((x) & GENMASK(23, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY(x)          (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_M           GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING1_PRECH_TO_RAS_DLY_X(x)        (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY(x)            (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_M             GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_RAS_DLY_X(x)          (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY(x)            (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_M             GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING1_RAS_TO_CAS_DLY_X(x)          (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY(x)              ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING1_WR_TO_RD_DLY_M               GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_TIMING2                              0x12c
+
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY(x)             (((x) << 28) & GENMASK(31, 28))
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_M              GENMASK(31, 28)
+#define ICPU_MEMCTRL_TIMING2_PRECH_ALL_DLY_X(x)           (((x) & GENMASK(31, 28)) >> 28)
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY(x)                 (((x) << 24) & GENMASK(27, 24))
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_M                  GENMASK(27, 24)
+#define ICPU_MEMCTRL_TIMING2_MDSET_DLY_X(x)               (((x) & GENMASK(27, 24)) >> 24)
+#define ICPU_MEMCTRL_TIMING2_REF_DLY(x)                   (((x) << 16) & GENMASK(23, 16))
+#define ICPU_MEMCTRL_TIMING2_REF_DLY_M                    GENMASK(23, 16)
+#define ICPU_MEMCTRL_TIMING2_REF_DLY_X(x)                 (((x) & GENMASK(23, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING2_INIT_DLY(x)                  ((x) & GENMASK(15, 0))
+#define ICPU_MEMCTRL_TIMING2_INIT_DLY_M                   GENMASK(15, 0)
+
+#define ICPU_MEMCTRL_TIMING3                              0x130
+
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY(x)                   (((x) << 16) & GENMASK(19, 16))
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY_M                    GENMASK(19, 16)
+#define ICPU_MEMCTRL_TIMING3_RMW_DLY_X(x)                 (((x) & GENMASK(19, 16)) >> 16)
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY(x)                (((x) << 12) & GENMASK(15, 12))
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_M                 GENMASK(15, 12)
+#define ICPU_MEMCTRL_TIMING3_ODT_RD_DLY_X(x)              (((x) & GENMASK(15, 12)) >> 12)
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY(x)                (((x) << 8) & GENMASK(11, 8))
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_M                 GENMASK(11, 8)
+#define ICPU_MEMCTRL_TIMING3_ODT_WR_DLY_X(x)              (((x) & GENMASK(11, 8)) >> 8)
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY(x)          (((x) << 4) & GENMASK(7, 4))
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_M           GENMASK(7, 4)
+#define ICPU_MEMCTRL_TIMING3_LOCAL_ODT_RD_DLY_X(x)        (((x) & GENMASK(7, 4)) >> 4)
+#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY(x)    ((x) & GENMASK(3, 0))
+#define ICPU_MEMCTRL_TIMING3_WR_TO_RD_CS_CHANGE_DLY_M     GENMASK(3, 0)
+
+#define ICPU_MEMCTRL_MR0_VAL                              0x138
+
+#define ICPU_MEMCTRL_MR1_VAL                              0x13c
+
+#define ICPU_MEMCTRL_MR2_VAL                              0x140
+
+#define ICPU_MEMCTRL_MR3_VAL                              0x144
+
+#define ICPU_MEMCTRL_TERMRES_CTRL                         0x148
+
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_EXT              BIT(11)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA(x)           (((x) << 7) & GENMASK(10, 7))
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_M            GENMASK(10, 7)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_RD_ENA_X(x)         (((x) & GENMASK(10, 7)) >> 7)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_EXT              BIT(6)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA(x)           (((x) << 2) & GENMASK(5, 2))
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_M            GENMASK(5, 2)
+#define ICPU_MEMCTRL_TERMRES_CTRL_ODT_WR_ENA_X(x)         (((x) & GENMASK(5, 2)) >> 2)
+#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_EXT        BIT(1)
+#define ICPU_MEMCTRL_TERMRES_CTRL_LOCAL_ODT_RD_ENA        BIT(0)
+
+#define ICPU_MEMCTRL_DQS_DLY(x) (0x150 + 0x4 * (x))
+#define ICPU_MEMCTRL_DQS_DLY_RSZ                          0x4
+
+#define ICPU_MEMCTRL_DQS_DLY_TRAIN_DQ_ENA                 BIT(11)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1(x)              (((x) << 8) & GENMASK(10, 8))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_M               GENMASK(10, 8)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM1_X(x)            (((x) & GENMASK(10, 8)) >> 8)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0(x)              (((x) << 5) & GENMASK(7, 5))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_M               GENMASK(7, 5)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_TRM0_X(x)            (((x) & GENMASK(7, 5)) >> 5)
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY(x)                   ((x) & GENMASK(4, 0))
+#define ICPU_MEMCTRL_DQS_DLY_DQS_DLY_M                    GENMASK(4, 0)
+
+#define ICPU_MEMPHY_CFG                                   0x160
+
+#define ICPU_MEMPHY_CFG_PHY_FLUSH_DIS                     BIT(10)
+#define ICPU_MEMPHY_CFG_PHY_RD_ADJ_DIS                    BIT(9)
+#define ICPU_MEMPHY_CFG_PHY_DQS_EXT                       BIT(8)
+#define ICPU_MEMPHY_CFG_PHY_FIFO_RST                      BIT(7)
+#define ICPU_MEMPHY_CFG_PHY_DLL_BL_RST                    BIT(6)
+#define ICPU_MEMPHY_CFG_PHY_DLL_CL_RST                    BIT(5)
+#define ICPU_MEMPHY_CFG_PHY_ODT_OE                        BIT(4)
+#define ICPU_MEMPHY_CFG_PHY_CK_OE                         BIT(3)
+#define ICPU_MEMPHY_CFG_PHY_CL_OE                         BIT(2)
+#define ICPU_MEMPHY_CFG_PHY_SSTL_ENA                      BIT(1)
+#define ICPU_MEMPHY_CFG_PHY_RST                           BIT(0)
+
+#define ICPU_MEMPHY_ZCAL                                  0x188
+
+#define ICPU_MEMPHY_ZCAL_ZCAL_CLK_SEL                     BIT(9)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT(x)                 (((x) << 5) & GENMASK(8, 5))
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_M                  GENMASK(8, 5)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_ODT_X(x)               (((x) & GENMASK(8, 5)) >> 5)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG(x)                     (((x) << 1) & GENMASK(4, 1))
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_M                      GENMASK(4, 1)
+#define ICPU_MEMPHY_ZCAL_ZCAL_PROG_X(x)                   (((x) & GENMASK(4, 1)) >> 1)
+#define ICPU_MEMPHY_ZCAL_ZCAL_ENA                         BIT(0)
+
+#define ICPU_MEMPHY_ZCAL_STAT                             0x18c
+
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL(x)               (((x) << 12) & GENMASK(31, 12))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_M                GENMASK(31, 12)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ZCTRL_X(x)             (((x) & GENMASK(31, 12)) >> 12)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU(x)          (((x) << 8) & GENMASK(9, 8))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_M           GENMASK(9, 8)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPU_X(x)        (((x) & GENMASK(9, 8)) >> 8)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD(x)          (((x) << 6) & GENMASK(7, 6))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_M           GENMASK(7, 6)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_ODTPD_X(x)        (((x) & GENMASK(7, 6)) >> 6)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU(x)             (((x) << 4) & GENMASK(5, 4))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_M              GENMASK(5, 4)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PU_X(x)           (((x) & GENMASK(5, 4)) >> 4)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD(x)             (((x) << 2) & GENMASK(3, 2))
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_M              GENMASK(3, 2)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_STAT_PD_X(x)           (((x) & GENMASK(3, 2)) >> 2)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_ERR                    BIT(1)
+#define ICPU_MEMPHY_ZCAL_STAT_ZCAL_DONE                   BIT(0)
+#endif
diff --git a/arch/mips/mach-mscc/include/mach/tlb.h b/arch/mips/mach-mscc/include/mach/tlb.h
new file mode 100644
index 0000000000..fdb554f551
--- /dev/null
+++ b/arch/mips/mach-mscc/include/mach/tlb.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#ifndef __ASM_MACH_TLB_H
+#define __ASM_MACH_TLB_H
+
+#include <asm/mipsregs.h>
+#include <mach/common.h>
+#include <linux/sizes.h>
+
+#define TLB_HI_MASK      0xffffe000
+#define TLB_LO_MASK      0x3fffffff	/* Masks off Fill bits */
+#define TLB_LO_SHIFT     6	/* PFN Start bit */
+
+#define PAGEMASK_SHIFT   13
+
+#define MMU_PAGE_CACHED   (3 << 3)	/* C(5:3) Cache Coherency Attributes */
+#define MMU_PAGE_UNCACHED (2 << 3)	/* C(5:3) Cache Coherency Attributes */
+#define MMU_PAGE_DIRTY    BIT(2)	/* = Writeable */
+#define MMU_PAGE_VALID    BIT(1)
+#define MMU_PAGE_GLOBAL   BIT(0)
+#define MMU_REGIO_RO_C    (MMU_PAGE_CACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL)
+#define MMU_REGIO_RO      (MMU_PAGE_UNCACHED | MMU_PAGE_VALID | MMU_PAGE_GLOBAL)
+#define MMU_REGIO_RW      (MMU_PAGE_DIRTY | MMU_REGIO_RO)
+#define MMU_REGIO_INVAL   (MMU_PAGE_GLOBAL)
+
+#define TLB_COUNT_MASK	  GENMASK(5, 0)
+#define TLB_COUNT_OFF	  25
+
+static inline u32 get_tlb_count(void)
+{
+	register u32 config1;
+
+	config1 = read_c0_config1();
+	config1 >>= TLB_COUNT_OFF;
+	config1 &= TLB_COUNT_MASK;
+
+	return 1 + config1;
+}
+
+static inline void create_tlb(int index, u32 offset, u32 size, u32 tlb_attrib1,
+			      u32 tlb_attrib2)
+{
+	register u32 tlb_mask, tlb_lo0, tlb_lo1;
+
+	tlb_mask = ((size >> 12) - 1) << PAGEMASK_SHIFT;
+	tlb_lo0 = tlb_attrib1 | (offset >> TLB_LO_SHIFT);
+	tlb_lo1 = tlb_attrib2 | ((offset + size) >> TLB_LO_SHIFT);
+
+	write_one_tlb(index, tlb_mask, offset & TLB_HI_MASK,
+		      tlb_lo0 & TLB_LO_MASK, tlb_lo1 & TLB_LO_MASK);
+}
+#endif				/* __ASM_MACH_TLB_H */
diff --git a/arch/mips/mach-mscc/lowlevel_init.S b/arch/mips/mach-mscc/lowlevel_init.S
new file mode 100644
index 0000000000..f8f14adf61
--- /dev/null
+++ b/arch/mips/mach-mscc/lowlevel_init.S
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+    .set noreorder
+    .extern     vcoreiii_tlb_init
+
+LEAF(lowlevel_init)
+	/*
+	 * As we have no stack yet, we can assume the restricted
+	 * luxury of the sX-registers without saving them
+	 */
+	move	s0,ra
+
+	jal	vcoreiii_tlb_init
+	 nop
+	jr	s0
+	 nop
+	END(lowlevel_init)
diff --git a/arch/mips/mach-mscc/reset.c b/arch/mips/mach-mscc/reset.c
new file mode 100644
index 0000000000..390bbd086a
--- /dev/null
+++ b/arch/mips/mach-mscc/reset.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+
+#include <asm/reboot.h>
+
+void _machine_restart(void)
+{
+	register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST;
+	(void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST);
+
+	/* Make sure VCore is NOT protected from reset */
+	clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT);
+
+	/* Change to SPI bitbang for SPI reset workaround... */
+	writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) |
+	       ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE);
+
+	/* Do the global reset */
+	writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST);
+
+	while (1)
+		; /* NOP */
+}