summaryrefslogtreecommitdiff
path: root/board/Marvell
diff options
context:
space:
mode:
authorPali Rohár <pali@kernel.org>2020-08-19 16:24:17 +0200
committerStefan Roese <sr@denx.de>2020-08-31 14:45:53 +0200
commita65e65939eaee611c86c96bee4556f552f5b42a3 (patch)
tree27a840ec63ff32cf164169510f4320666cbe6642 /board/Marvell
parent4366082bfee345d2ca9f8ca7a27e70b6e30efd47 (diff)
arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Due to different partition layouts in different U-Boot versions, DTS for Espressobin in Linux does not contain any definition of MTD partitions. See commit https://git.kernel.org/stable/c/00954566464a4 for more details. This patch via ft_board_setup() hook fills current partition layout used by U-Boot, so booted kernel would see correct MTD partitions layout. U-Boot env partition is calculated from CONFIG_ENV_OFFSET option. First partition contains secure firmware, ARM trusted firmware and U-Boot with checksums. So it is not possible to replace just one image (e.g. U-Boot) without updating other parts where is stored checksum of U-Boot. Therefore there is no extra partition defined for U-Boot and first partition is called just 'firmware'. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Tested-by: Andre Heider <a.heider@gmail.com>
Diffstat (limited to 'board/Marvell')
-rw-r--r--board/Marvell/mvebu_armada-37xx/board.c100
1 files changed, 100 insertions, 0 deletions
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 031de318c6..7b9c3223ed 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -243,3 +243,103 @@ int board_network_enable(struct mii_dev *bus)
return 0;
}
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ int ret;
+ int spi_off;
+ int parts_off;
+ int part_off;
+
+ /* Fill SPI MTD partitions for Linux kernel on Espressobin */
+ if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ return 0;
+
+ spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
+ if (spi_off < 0)
+ return 0;
+
+ /* Do not touch partitions if they are already defined */
+ if (fdt_subnode_offset(blob, spi_off, "partitions") >= 0)
+ return 0;
+
+ parts_off = fdt_add_subnode(blob, spi_off, "partitions");
+ if (parts_off < 0) {
+ printf("Can't add partitions node: %s\n", fdt_strerror(parts_off));
+ return 0;
+ }
+
+ ret = fdt_setprop_string(blob, parts_off, "compatible", "fixed-partitions");
+ if (ret < 0) {
+ printf("Can't set compatible property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_setprop_u32(blob, parts_off, "#address-cells", 1);
+ if (ret < 0) {
+ printf("Can't set #address-cells property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_setprop_u32(blob, parts_off, "#size-cells", 1);
+ if (ret < 0) {
+ printf("Can't set #size-cells property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ /* Add u-boot-env partition */
+
+ part_off = fdt_add_subnode(blob, parts_off, "partition@u-boot-env");
+ if (part_off < 0) {
+ printf("Can't add partition@u-boot-env node: %s\n", fdt_strerror(part_off));
+ return 0;
+ }
+
+ ret = fdt_setprop_u32(blob, part_off, "reg", CONFIG_ENV_OFFSET);
+ if (ret < 0) {
+ printf("Can't set partition@u-boot-env reg property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_appendprop_u32(blob, part_off, "reg", CONFIG_ENV_SIZE);
+ if (ret < 0) {
+ printf("Can't set partition@u-boot-env reg property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_setprop_string(blob, part_off, "label", "u-boot-env");
+ if (ret < 0) {
+ printf("Can't set partition@u-boot-env label property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ /* Add firmware partition */
+
+ part_off = fdt_add_subnode(blob, parts_off, "partition@firmware");
+ if (part_off < 0) {
+ printf("Can't add partition@firmware node: %s\n", fdt_strerror(part_off));
+ return 0;
+ }
+
+ ret = fdt_setprop_u32(blob, part_off, "reg", 0);
+ if (ret < 0) {
+ printf("Can't set partition@firmware reg property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_appendprop_u32(blob, part_off, "reg", CONFIG_ENV_OFFSET);
+ if (ret < 0) {
+ printf("Can't set partition@firmware reg property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ ret = fdt_setprop_string(blob, part_off, "label", "firmware");
+ if (ret < 0) {
+ printf("Can't set partition@firmware label property: %s\n", fdt_strerror(ret));
+ return 0;
+ }
+
+ return 0;
+}
+#endif