* Patches by Yuli Barcohen, 13 Jul 2003:

  - Correct flash and JFFS2 support for MPC8260ADS
  - fix PVR values and clock generation for PowerQUICC II family
    (8270/8275/8280)

* Patch by Bernhard Kuhn, 08 Jul 2003:
  - add support for M68K targets

* Patch by Ken Chou, 3 Jul:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)

* Allow to enable "slow" POST routines by key press on power-on
* Fix temperature dependend switching of LCD backlight on LWMON
* Tweak output format for LWMON

1 files changed, 68 insertions, 0 deletions

diff --git a/board/RRvision/video_ad7179.h b/board/RRvision/video_ad7179.h
new file mode 100644
index 0000000000..f14673827d
--- /dev/null
+++ b/board/RRvision/video_ad7179.h
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2003 Wolfgang Grandegger <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define VIDEO_ENCODER_NAME	"Analog Devices AD7179"
+
+#define VIDEO_ENCODER_I2C_RATE	100000	/* Max rate is 100Khz	*/
+#define VIDEO_ENCODER_CB_Y_CR_Y		/* Use CB Y CR Y format...	*/
+
+#define VIDEO_MODE_YUYV		/* The only mode supported by this encoder	*/
+#undef	VIDEO_MODE_RGB
+#define VIDEO_MODE_BPP		16
+
+#ifdef	VIDEO_MODE_PAL
+#define VIDEO_ACTIVE_COLS	720
+#define VIDEO_ACTIVE_ROWS	576
+#define VIDEO_VISIBLE_COLS	640
+#define VIDEO_VISIBLE_ROWS	480
+#else
+#error "NTSC mode is not supported"
+#endif
+
+static unsigned char video_encoder_data[] = {
+				0x05, /* Mode Register 0 */
+				0x11, /* Mode Register 1 */
+				0x20, /* Mode Register 2 */
+				0x0C, /* Mode Register 3 */
+				0x01, /* Mode Register 4 */
+				0x00, /* Reserved */
+				0x00, /* Reserved */
+				0x04, /* Timing Register 0 */
+				0x00, /* Timing Register 1 */
+				0xCB, /* Subcarrier Frequency Register 0 */
+				0x0A, /* Subcarrier Frequency Register 1 */
+				0x09, /* Subcarrier Frequency Register 2 */
+				0x2A, /* Subcarrier Frequency Register 3 */
+				0x00, /* Subcarrier Phase */
+				0x00, /* Closed Captioning Ext Reg 0 */
+				0x00, /* Closed Captioning Ext Reg 1 */
+				0x00, /* Closed Captioning Reg 0 */
+				0x00, /* Closed Captioning Reg 1 */
+				0x00, /* Pedestal Control Reg 0 */
+				0x00, /* Pedestal Control Reg 1 */
+				0x00, /* Pedestal Control Reg 2 */
+				0x00, /* Pedestal Control Reg 3 */
+				0x00, /* CGMS_WSS Reg 0 */
+				0x00, /* CGMS_WSS Reg 0 */
+				0x00, /* CGMS_WSS Reg 0 */
+				0x00  /* Teletext Req. Control Reg */
+} ;