diff options
| author | Stefan Roese <sr@denx.de> | 2014-10-22 12:13:11 +0200 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2014-10-23 09:59:21 -0400 |
| commit | d5c5132f878394b7487d3f6da0d469aa72737318 (patch) | |
| tree | 6e0879ddf2c632f0ed23cdbd6250bcf65f75b423 /board/Seagate/goflexhome | |
| parent | 4aceea2088e04724900a9c6f22c48d99293206f2 (diff) | |
arm: marvell: Extract kirkwood gpio functions into new common file gpio.c
This makes is possible to use those gpio functions from other MVEBU SoC's as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Luka Perkov <luka@openwrt.org>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Diffstat (limited to 'board/Seagate/goflexhome')
| -rw-r--r-- | board/Seagate/goflexhome/goflexhome.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c index 3e4ae89368..c3f4cbf84d 100644 --- a/board/Seagate/goflexhome/goflexhome.c +++ b/board/Seagate/goflexhome/goflexhome.c @@ -83,9 +83,9 @@ int board_early_init_f(void) * There are maximum 64 gpios controlled through 2 sets of registers * the below configuration configures mainly initial LED status */ - kw_config_gpio(GOFLEXHOME_OE_VAL_LOW, - GOFLEXHOME_OE_VAL_HIGH, - GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH); + mvebu_config_gpio(GOFLEXHOME_OE_VAL_LOW, + GOFLEXHOME_OE_VAL_HIGH, + GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH); kirkwood_mpp_conf(kwmpp_config, NULL); return 0; } @@ -149,7 +149,7 @@ static void set_leds(u32 leds, u32 blinking) u32 oe; u32 bl; - r = (struct kwgpio_registers *)KW_GPIO1_BASE; + r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE; oe = readl(&r->oe) | BOTH_LEDS; writel(oe & ~leds, &r->oe); /* active low */ bl = readl(&r->blink_en) & ~BOTH_LEDS; |