diff options
| author | Marek Vasut <marex@denx.de> | 2015-07-25 08:22:21 +0200 |
|---|---|---|
| committer | Marek Vasut <marex@denx.de> | 2015-08-08 14:14:04 +0200 |
| commit | 9617ceb9cfc1eeb3ca0d962b53d2d87506cc23ca (patch) | |
| tree | 21c951b39b254a3d77bc2f0be5d9bb9b81aca240 /board/altera/socfpga/qts/pinmux_config.h | |
| parent | 2e8fcc7e41cc5fea7fa399e5e35fc261fa67b13b (diff) | |
arm: socfpga: Move generated files into qts subdir
Move all the files generated by Quartus into the qts/ subdir of the
board/altera/socfpga dir to make them explicitly separate from the
generic U-Boot code.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Diffstat (limited to 'board/altera/socfpga/qts/pinmux_config.h')
| -rw-r--r-- | board/altera/socfpga/qts/pinmux_config.h | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/board/altera/socfpga/qts/pinmux_config.h b/board/altera/socfpga/qts/pinmux_config.h new file mode 100644 index 0000000000..21fabb0b2b --- /dev/null +++ b/board/altera/socfpga/qts/pinmux_config.h @@ -0,0 +1,54 @@ +/* This file is generated by Preloader Generator */ + +#ifndef _PRELOADER_PINMUX_CONFIG_H_ +#define _PRELOADER_PINMUX_CONFIG_H_ + +/* + * State of enabling for which IP connected out through the muxing. + * Value 1 mean the IP connection is muxed out + */ +#define CONFIG_HPS_EMAC0 (1) +#define CONFIG_HPS_EMAC1 (0) +#define CONFIG_HPS_USB0 (0) +#define CONFIG_HPS_USB1 (1) +#define CONFIG_HPS_NAND (0) +#define CONFIG_HPS_SDMMC (1) +#define CONFIG_HPS_QSPI (0) +#define CONFIG_HPS_UART0 (1) +#define CONFIG_HPS_UART1 (0) +#define CONFIG_HPS_TRACE (0) +#define CONFIG_HPS_I2C0 (1) +#define CONFIG_HPS_I2C1 (0) +#define CONFIG_HPS_I2C2 (0) +#define CONFIG_HPS_I2C3 (0) +#define CONFIG_HPS_SPIM0 (0) +#define CONFIG_HPS_SPIM1 (0) +#define CONFIG_HPS_SPIS0 (0) +#define CONFIG_HPS_SPIS1 (0) +#define CONFIG_HPS_CAN0 (1) +#define CONFIG_HPS_CAN1 (0) + +/* IP attribute value (which affected by pin muxing configuration) */ +#define CONFIG_HPS_SDMMC_BUSWIDTH (8) + +/* 1 if the pins are connected out */ +#define CONFIG_HPS_QSPI_CS0 (0) +#define CONFIG_HPS_QSPI_CS1 (0) +#define CONFIG_HPS_QSPI_CS2 (0) +#define CONFIG_HPS_QSPI_CS3 (0) + +/* UART */ +/* 1 means the pin is mux out or available */ +#define CONFIG_HPS_UART0_TX (1) +#define CONFIG_HPS_UART0_RX (1) +#define CONFIG_HPS_UART0_CTS (0) +#define CONFIG_HPS_UART0_RTS (0) +#define CONFIG_HPS_UART1_TX (0) +#define CONFIG_HPS_UART1_RX (0) +#define CONFIG_HPS_UART1_CTS (0) +#define CONFIG_HPS_UART1_RTS (0) + +/* Pin mux data */ +#define CONFIG_HPS_PINMUX_NUM (207) + +#endif /* _PRELOADER_PINMUX_CONFIG_H_ */ |