Code cleanup. Update CHANGELOG

4 files changed, 10 insertions, 22 deletions

diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
index 79b948e46b..ce21374658 100644
--- a/board/amcc/acadia/config.mk
+++ b/board/amcc/acadia/config.mk
@@ -33,7 +33,7 @@ endif
 
 ifeq ($(CONFIG_SPI_U_BOOT),y)
 LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-spi.lds
-PAD_TO = 0x00840000 
+PAD_TO = 0x00840000
 endif
 
 ifeq ($(debug),1)
diff --git a/board/amcc/acadia/cpr.c b/board/amcc/acadia/cpr.c
index 10d8290e62..23b9e1242b 100644
--- a/board/amcc/acadia/cpr.c
+++ b/board/amcc/acadia/cpr.c
@@ -184,9 +184,9 @@ unsigned long get_tbclk (void)
 	/*
 	 * Determine FBK_DIV.
 	 */
-        pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
-        if (pllFbkDiv == 0)
-                pllFbkDiv = 256;
+	pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (pllFbkDiv == 0)
+		pllFbkDiv = 256;
 
 	freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv;
 
diff --git a/board/amcc/acadia/flash.c b/board/amcc/acadia/flash.c
index 39a11f9387..0626aba9d5 100644
--- a/board/amcc/acadia/flash.c
+++ b/board/amcc/acadia/flash.c
@@ -727,7 +727,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	}
 #endif /* TODO: remove ifdef when Flash responds correctly */
 
-	/* 
+	/*
 	 * TODO: Start
 	 * 	 uncomment block above when Flash responds correctly.
 	 *	 also remove the lines below:
@@ -847,7 +847,7 @@ static int wait_for_DQ7_2(flash_info_t * info, int sect)
 	last = start;
 	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
 	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
-		DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now);	
+		DEBUGF("DQ7_2: start = 0x%08lx, now = 0x%08lx\n", start, now);
 		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
@@ -871,7 +871,7 @@ static int wait_for_DQ7_2(flash_info_t * info, int sect)
 static void wr_flash_cmd(ulong sector, ushort addr, CFG_FLASH_WORD_SIZE value)
 {
 	int fw_size;
-	
+
 	fw_size = sizeof(value);
 	switch (fw_size)
 	{
@@ -991,8 +991,8 @@ static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
 	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
-	
-	if (count > 0) {	
+
+	if (count > 0) {
 		return 0;
 	} else {
 		return 1;
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 0f1de71c1b..a1b015519a 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -55,7 +55,6 @@ void sdram_init(void)
 	if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) {
 		mtspr(SPRG7, LOAK_NONE);	/* "NONE" */
 	}
-
 #if 1
 	/*
 	 * When running the NAND SPL, the normal EBC configuration is not
@@ -77,7 +76,6 @@ void sdram_init(void)
 	mtspr(SPRG6, LOAK_SPL);	/* "SPL " */
 	mtspr(SPRG7, LOAK_OCM);	/* "OCM " */
 #endif
-
 	return;
 }
 
@@ -98,14 +96,12 @@ static void cram_bcr_write(u32 wr_val)
 	wr_val = wr_val << 2;
 	/* wr_val = 0x1c048; */
 
-
 	/*
 	 * # stop PLL clock before programming CRAM
 	 * set EPLD0_MUX_CTL.OESPR3 = 1
 	 * delay 2
 	 */
 
-
 	/*
 	 * # CS1
 	 * read 0x00200000
@@ -147,7 +143,6 @@ static void cram_bcr_write(u32 wr_val)
 	 * set EPLD0_MUX_CTL.OESPR3 = 0
 	 */
 
-
 	/*
 	 * set CRAMCR = 0x1
 	 */
@@ -254,9 +249,6 @@ static u32 is_cram(void)
 		gpio_reg = in32(GPIO1_OR);
 		out32(GPIO1_OR,  gpio_reg | 0x00000400);
 
-
-
-
 		/* Read Version ID */
 		cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR);
 		udelay(100000);
@@ -309,8 +301,7 @@ static long int cram_init(u32 already_inited)
 	 * In the case of NAND boot and SPI boot, CRAM will already be
 	 * initialized by the pre-loader
 	 */
-	if (already_inited != 1)
-	{
+	if (already_inited != 1) {
 		/*
 		 * #o CRAM Card
 		 * #  - CRAMCRE @reg16 = 1; for CRAM to use
@@ -323,7 +314,6 @@ static long int cram_init(u32 already_inited)
 		 * #end
 		 */
 
-
 		/*
 		 * #1. EBC need to program READY, CLK, ADV for ASync mode
 		 * # config output
@@ -448,8 +438,6 @@ static long int cram_init(u32 already_inited)
 		/*
 		 * set EPLD0_MUX_CTL.OESPR3 = 0
 		 */
-
-
 		mtspr(SPRG7, LOAK_CRAM);	/* "CRAM" */
 	} /* if (already_inited != 1) */