Merge tag 'xilinx-for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.10

Versal:
- xspi bootmode fix
- Removing one clock from clk driver
- Align u-boot memory setting with OS by default
- Map TCM and OCM by default

ZynqMP:
- Minor DT improvements
- Reduce console buffer for mini configurations
- Add fix for AMS
- Add support for XDP platform

Zynq:
- Support for AES engine
- Enable bigger memory test by default
- Extend documentation for SD preparation
- Use different freq for Topic miami board

mmc:
- minor GD pointer removal

net:
- Support fixed-link cases by zynq gem
- Fix phy looking loop in axi enet driver

spi:
- Cleanup global macros for xilinx spi drivers

firmware:
- Add support for pmufw reloading

fpga:
- Improve error status reporting

common:
- Remove 4kB addition space for FDT allocation

5 files changed, 4 insertions, 520 deletions

diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 2ff90039ca..5e837cfaef 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -6,3 +6,7 @@ F:	board/amlogic/w400/
 F:	configs/khadas-vim3_defconfig
 F:	configs/khadas-vim3l_defconfig
 F:	configs/odroid-n2_defconfig
+F:	doc/board/amlogic/w400.rst
+F:	doc/board/amlogic/khadas-vim3.rst
+F:	doc/board/amlogic/khadas-vim3l.rst
+F:	doc/board/amlogic/odroid-n2.rst
diff --git a/board/amlogic/w400/README.khadas-vim3 b/board/amlogic/w400/README.khadas-vim3
deleted file mode 100644
index 399bf49295..0000000000
--- a/board/amlogic/w400/README.khadas-vim3
+++ /dev/null
@@ -1,131 +0,0 @@
-U-Boot for Khadas VIM3
-======================
-
-Khadas VIM3 is a single board computer manufactured by Shenzhen Wesion
-Technology Co., Ltd. with the following specifications:
-
- - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- - 4GB LPDDR4 SDRAM
- - Gigabit Ethernet
- - HDMI 2.1 display
- - 40-pin GPIO header
- - 1 x USB 3.0 Host, 1 x USB 2.0 Host
- - eMMC, microSD
- - M.2
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the U-Boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - ADC
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make khadas-vim3_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
-
- > DIR=vim3-u-boot
- > git clone --depth 1 \
-       https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
-       $DIR
-
- > cd vim3-u-boot
- > make kvim3_defconfig
- > make
- > export UBOOTDIR=$PWD
-
- Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/khadas/kvim3/firmware/acs.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl2.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl30.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl31.img fip/
- > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
- > cp $UBOOTDIR/fip/g12b/lpddr3_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12b/piei.fw fip/
- > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh fip/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > sh fip/blx_fix.sh \
-	fip/bl2.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/acs.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
-					--output fip/bl30_new.bin.g12a.enc \
-					--level v3
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
-					--output fip/bl30_new.bin.enc \
-					--level v3 --type bl30
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
-					--output fip/bl31.img.enc \
-					--level v3 --type bl31
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
-					--output fip/bl33.bin.enc \
-					--level v3 --type bl33 --compress lz4
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
-					--output fip/bl2.n.bin.sig
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc \
-		--ddrfw1 fip/ddr4_1d.fw \
-		--ddrfw2 fip/ddr4_2d.fw \
-		--ddrfw3 fip/ddr3_1d.fw \
-		--ddrfw4 fip/piei.fw \
-		--ddrfw5 fip/lpddr4_1d.fw \
-		--ddrfw6 fip/lpddr4_2d.fw \
-		--ddrfw7 fip/diag_lpddr4.fw \
-		--ddrfw8 fip/aml_ddr.fw \
-		--ddrfw9 fip/lpddr3_1d.fw \
-		--level v3
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/w400/README.khadas-vim3l b/board/amlogic/w400/README.khadas-vim3l
deleted file mode 100644
index b2d9abbfd9..0000000000
--- a/board/amlogic/w400/README.khadas-vim3l
+++ /dev/null
@@ -1,131 +0,0 @@
-U-Boot for Khadas VIM3L
-=======================
-
-Khadas VIM3L is a single board computer manufactured by Shenzhen Wesion
-Technology Co., Ltd. with the following specifications:
-
- - Amlogic S905D3 Arm Cortex-A55 quad-core SoC
- - 2GB LPDDR4 SDRAM
- - Gigabit Ethernet
- - HDMI 2.1 display
- - 40-pin GPIO header
- - 1 x USB 3.0 Host, 1 x USB 2.0 Host
- - eMMC, microSD
- - M.2
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the U-Boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - ADC
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make khadas-vim3l_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
-
- > DIR=vim3l-u-boot
- > git clone --depth 1 \
-       https://github.com/khadas/u-boot.git -b khadas-vims-v2015.01 \
-       $DIR
-
- > cd vim3l-u-boot
- > make kvim3l_defconfig
- > make
- > export UBOOTDIR=$PWD
-
- Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/khadas/kvim3l/firmware/acs.bin fip/
- > cp $UBOOTDIR/fip/g12a/bl2.bin fip/
- > cp $UBOOTDIR/fip/g12a/bl30.bin fip/
- > cp $UBOOTDIR/fip/g12a/bl31.img fip/
- > cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/
- > cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/
- > cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/
- > cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12a/piei.fw fip/
- > cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh fip/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > sh fip/blx_fix.sh \
-	fip/bl2.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/acs.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
-					--output fip/bl30_new.bin.g12a.enc \
-					--level v3
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
-					--output fip/bl30_new.bin.enc \
-					--level v3 --type bl30
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
-					--output fip/bl31.img.enc \
-					--level v3 --type bl31
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
-					--output fip/bl33.bin.enc \
-					--level v3 --type bl33 --compress lz4
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
-					--output fip/bl2.n.bin.sig
- > $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc \
-		--ddrfw1 fip/ddr4_1d.fw \
-		--ddrfw2 fip/ddr4_2d.fw \
-		--ddrfw3 fip/ddr3_1d.fw \
-		--ddrfw4 fip/piei.fw \
-		--ddrfw5 fip/lpddr4_1d.fw \
-		--ddrfw6 fip/lpddr4_2d.fw \
-		--ddrfw7 fip/diag_lpddr4.fw \
-		--ddrfw8 fip/aml_ddr.fw \
-		--ddrfw9 fip/lpddr3_1d.fw \
-		--level v3
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/w400/README.odroid-n2 b/board/amlogic/w400/README.odroid-n2
deleted file mode 100644
index 8142eebea0..0000000000
--- a/board/amlogic/w400/README.odroid-n2
+++ /dev/null
@@ -1,129 +0,0 @@
-U-Boot for ODROID-N2
-====================
-
-ODROID-N2 is a single board computer manufactured by Hardkernel
-Co. Ltd with the following specifications:
-
- - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- - 4GB DDR4 SDRAM
- - Gigabit Ethernet
- - HDMI 2.1 4K/60Hz display
- - 40-pin GPIO header
- - 4 x USB 3.0 Host, 1 x USB OTG
- - eMMC, microSD
- - Infrared receiver
-
-Schematics are available on the manufacturer website.
-
-Currently the u-boot port supports the following devices:
- - serial
- - eMMC, microSD
- - Ethernet
- - I2C
- - Regulators
- - Reset controller
- - Clock controller
- - ADC
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make odroid-n2_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
-
- > DIR=odroid-n2
- > git clone --depth 1 \
-       https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \
-       $DIR
-
- > cd odroid-n2
- > make odroidn2_defconfig
- > make
- > export UBOOTDIR=$PWD
-
- Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl2.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl30.bin fip/
- > cp $UBOOTDIR/fip/g12b/bl31.img fip/
- > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/
- > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/
- > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/
- > cp $UBOOTDIR/fip/g12b/piei.fw fip/
- > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh fip/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > sh fip/blx_fix.sh \
-	fip/bl2.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/acs.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
-					--output fip/bl30_new.bin.g12a.enc \
-					--level v3
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
-					--output fip/bl30_new.bin.enc \
-					--level v3 --type bl30
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
-					--output fip/bl31.img.enc \
-					--level v3 --type bl31
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
-					--output fip/bl33.bin.enc \
-					--level v3 --type bl33 --compress lz4
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
-					--output fip/bl2.n.bin.sig
- > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc \
-		--ddrfw1 fip/ddr4_1d.fw \
-		--ddrfw2 fip/ddr4_2d.fw \
-		--ddrfw3 fip/ddr3_1d.fw \
-		--ddrfw4 fip/piei.fw \
-		--ddrfw5 fip/lpddr4_1d.fw \
-		--ddrfw6 fip/lpddr4_2d.fw \
-		--ddrfw7 fip/diag_lpddr4.fw \
-		--ddrfw8 fip/aml_ddr.fw \
-		--level v3
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/w400/README.w400 b/board/amlogic/w400/README.w400
deleted file mode 100644
index c129717a11..0000000000
--- a/board/amlogic/w400/README.w400
+++ /dev/null
@@ -1,129 +0,0 @@
-U-Boot for Amlogic W400
-=======================
-
-U200 is a reference board manufactured by Amlogic with the following
-specifications:
-
- - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
- - 2GB DDR4 SDRAM
- - 10/100 Ethernet (Internal PHY)
- - 1 x USB 3.0 Host
- - eMMC
- - SDcard
- - Infrared receiver
- - SDIO WiFi Module
- - MIPI DSI Connector
- - Audio HAT Connector
- - PCI-E M.2 Connector
-
-Schematics are available from Amlogic on demand.
-
-Currently the u-boot port supports the following devices:
- - serial
- - Ethernet
- - Regulators
- - Clock controller
-
-u-boot compilation
-==================
-
- > export CROSS_COMPILE=aarch64-none-elf-
- > make w400_defconfig
- > make
-
-Image creation
-==============
-
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
-
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
- > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
- > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
- > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
- > cd amlogic-u-boot
- > make g12b_w400_v1_defconfig
- > make
- > export UBOOTDIR=$PWD
-
-Download the latest Amlogic Buildroot package, and extract it :
- > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
- > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
- > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
- > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
-
-Go back to mainline U-Boot source tree then :
- > mkdir fip
-
- > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
- > cp $UBOOTDIR/build/scp_task/bl301.bin fip/
- > cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/
- > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/
- > cp $FIPDIR/g12b/ddr3_1d.fw fip/
- > cp $FIPDIR/g12b/ddr4_1d.fw fip/
- > cp $FIPDIR/g12b/ddr4_2d.fw fip/
- > cp $FIPDIR/g12b/diag_lpddr4.fw fip/
- > cp $FIPDIR/g12b/lpddr4_1d.fw fip/
- > cp $FIPDIR/g12b/lpddr4_2d.fw fip/
- > cp $FIPDIR/g12b/piei.fw fip/
- > cp $FIPDIR/g12b/aml_ddr.fw fip/
- > cp u-boot.bin fip/bl33.bin
-
- > sh fip/blx_fix.sh \
-	fip/bl30.bin \
-	fip/zero_tmp \
-	fip/bl30_zero.bin \
-	fip/bl301.bin \
-	fip/bl301_zero.bin \
-	fip/bl30_new.bin \
-	bl30
-
- > sh fip/blx_fix.sh \
-	fip/bl2.bin \
-	fip/zero_tmp \
-	fip/bl2_zero.bin \
-	fip/acs.bin \
-	fip/bl21_zero.bin \
-	fip/bl2_new.bin \
-	bl2
-
- > $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
-					--output fip/bl30_new.bin.g12a.enc \
-					--level v3
- > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
-					--output fip/bl30_new.bin.enc \
-					--level v3 --type bl30
- > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
-					--output fip/bl31.img.enc \
-					--level v3 --type bl31
- > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
-					--output fip/bl33.bin.enc \
-					--level v3 --type bl33
- > $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
-					--output fip/bl2.n.bin.sig
- > $FIPDIR/g12b/aml_encrypt_g12b --bootmk \
-		--output fip/u-boot.bin \
-		--bl2 fip/bl2.n.bin.sig \
-		--bl30 fip/bl30_new.bin.enc \
-		--bl31 fip/bl31.img.enc \
-		--bl33 fip/bl33.bin.enc \
-		--ddrfw1 fip/ddr4_1d.fw \
-		--ddrfw2 fip/ddr4_2d.fw \
-		--ddrfw3 fip/ddr3_1d.fw \
-		--ddrfw4 fip/piei.fw \
-		--ddrfw5 fip/lpddr4_1d.fw \
-		--ddrfw6 fip/lpddr4_2d.fw \
-		--ddrfw7 fip/diag_lpddr4.fw \
-		--ddrfw8 fip/aml_ddr.fw \
-		--level v3
-
-and then write the image to SD with:
-
- > DEV=/dev/your_sd_device
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444