summaryrefslogtreecommitdiff
path: root/board/apollon/apollon.c
diff options
context:
space:
mode:
authorPeter Pearse <peter.pearse@arm.com>2007-11-09 15:24:26 +0000
committerPeter Pearse <peter.pearse@arm.com>2007-11-09 15:24:26 +0000
commit5ca9881aad8c413ac2a82868a5e3719178254502 (patch)
treed5146b7135702a3fa2833c99a2c3df4ab0f8cc63 /board/apollon/apollon.c
parent992742a5b09d9040adbd156fb90756af66ade310 (diff)
Add apollon board support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Diffstat (limited to 'board/apollon/apollon.c')
-rw-r--r--board/apollon/apollon.c608
1 files changed, 608 insertions, 0 deletions
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
new file mode 100644
index 0000000000..e2c6277257
--- /dev/null
+++ b/board/apollon/apollon.c
@@ -0,0 +1,608 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Derived from omap2420
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+
+void wait_for_command_complete(unsigned int wd_base);
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+******************************************************/
+static inline void delay(unsigned long loops) {
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0"(loops)); }
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gpmc_init(); /* in SRAM or SDRM, finish GPMC */
+
+ gd->bd->bi_arch_number = 919;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called path is with sram stack.
+ **********************************************************/
+void s_init(void)
+{
+
+ watchdog_init();
+ set_muxconf_regs();
+ delay(100);
+
+ peripheral_enable();
+ icache_enable();
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+********************************************************/
+int misc_init_r(void)
+{
+ ether_init(); /* better done here so timers are init'ed */
+ return (0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * The ROM takes care of the secure one. Of the 3 GP ones,
+ * 1 can reset us directly, the other 2 only generate MPU interrupts.
+ */
+ __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
+
+#define MPU_WD_CLOCKED 1
+#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
+ __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
+ wait_for_command_complete(WD3_BASE);
+ __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
+
+ __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
+ wait_for_command_complete(WD4_BASE);
+ __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+******************************************************/
+void wait_for_command_complete(unsigned int wd_base) {
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base + WWPS);
+ } while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+ int cnt = 20;
+
+ __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
+
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ do {
+ __raw_writew(0x1, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0) {
+ printf("1. eth reset err\n");
+ goto eth_reset_err_out;
+ }
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+ cnt = 20;
+
+ do {
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0) {
+ printf("2. eth reset err\n");
+ goto eth_reset_err_out;
+ }
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+ udelay(1000);
+
+ *((volatile unsigned char *)ETH_CONTROL_REG) &= ~0x01;
+ udelay(1000);
+
+eth_reset_err_out:
+ return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+**********************************************/
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0 = 0, size1 = 0;
+ u32 mtype, btype, rev = 0, cpu = 0;
+#define NOT_EARLY 0
+
+ btype = get_board_type();
+ mtype = get_mem_type();
+ rev = get_cpu_rev();
+ cpu = get_cpu_type();
+
+ display_board_info(btype);
+
+ if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ printf("ddr combo\n");
+ do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
+ }
+
+ size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+#if CONFIG_NR_DRAM_BANKS > 1
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
+ gd->bd->bi_dram[1].size = size1;
+#endif
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ * specific to the hardware
+ *********************************************************/
+void set_muxconf_regs(void)
+{
+ muxSetupSDRC();
+ muxSetupGPMC();
+ muxSetupUsb0(); /* USB Device */
+ muxSetupUsbHost(); /* USB Host */
+ muxSetupUART1();
+ muxSetupLCD();
+ muxSetupMMCSD();
+ muxSetupTouchScreen();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+******************************************************************/
+void peripheral_enable(void)
+{
+ unsigned int v, if_clks = 0, func_clks = 0;
+
+ /* Enable GP2 timer. */
+ if_clks |= BIT4 | BIT3;
+ func_clks |= BIT4 | BIT3;
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2; /* Sys_clk input OMAP2420_GPT2 */
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v, CM_ICLKEN1_CORE);
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ delay(1000);
+
+#ifndef KERNEL_UPDATED
+ {
+#define V1 0xffffffff
+#define V2 0x00000007
+
+ __raw_writel(V1, CM_FCLKEN1_CORE);
+ __raw_writel(V2, CM_FCLKEN2_CORE);
+ __raw_writel(V1, CM_ICLKEN1_CORE);
+ __raw_writel(V1, CM_ICLKEN2_CORE);
+ }
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0 (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
+ *MuxConfigReg &= (uint8) (~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
+ *MuxConfigReg &= (uint8) (~0x1F);
+}
+
+#define CONTROL_PADCONF_USB1_RCV ((volatile uint8 *)0x480000EB)
+#define CONTROL_PADCONF_USB1_TXEN ((volatile uint8 *)0x480000EC)
+#define CONTROL_PADCONF_GPIO69 ((volatile uint8 *)0x480000ED)
+#define CONTROL_PADCONF_GPIO70 ((volatile uint8 *)0x480000EE)
+
+#define CONTROL_PADCONF_GPIO102 ((volatile uint8 *)0x48000116)
+#define CONTROL_PADCONF_GPIO103 ((volatile uint8 *)0x48000117)
+#define CONTROL_PADCONF_GPIO104 ((volatile uint8 *)0x48000118)
+#define CONTROL_PADCONF_GPIO105 ((volatile uint8 *)0x48000119)
+/****************************************
+ * Routine: muxSetupUSBHost (ostboot)
+ * Description: Setup USB Host muxing
+ *****************************************/
+void muxSetupUsbHost(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ /* V19 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_RCV;
+ *MuxConfigReg = 1;
+ /* W20 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB1_TXEN;
+ *MuxConfigReg = 1;
+ /* N14 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO69;
+ *MuxConfigReg = 3;
+ /* P15 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO70;
+ *MuxConfigReg = 3;
+
+ /* L18 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO102;
+ *MuxConfigReg = 3;
+ /* L19 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO103;
+ *MuxConfigReg = 3;
+ /* K15 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO104;
+ *MuxConfigReg = 3;
+ /* K14 */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPIO105;
+ *MuxConfigReg = 3;
+}
+
+/****************************************
+ * Routine: muxSetupUART1 (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* UART1_CTS pin configuration, PIN = D21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RTS pin configuration, PIN = H21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_TX pin configuration, PIN = L20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RX pin configuration, PIN = T21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+}
+
+/****************************************
+ * Routine: muxSetupLCD (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* LCD_D0 pin configuration, PIN = Y7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D1 pin configuration, PIN = P10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D2 pin configuration, PIN = V8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D3 pin configuration, PIN = Y8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D4 pin configuration, PIN = W8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D5 pin configuration, PIN = R10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D6 pin configuration, PIN = Y9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D7 pin configuration, PIN = V9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D8 pin configuration, PIN = W9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D9 pin configuration, PIN = P11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D10 pin configuration, PIN = V10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D11 pin configuration, PIN = Y10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D12 pin configuration, PIN = W10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D13 pin configuration, PIN = R11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D14 pin configuration, PIN = V11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D15 pin configuration, PIN = W11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D16 pin configuration, PIN = P12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_D17 pin configuration, PIN = R12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_PCLK pin configuration, PIN = W6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_VSYNC pin configuration, PIN = V7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_HSYNC pin configuration, PIN = Y6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* LCD_ACBIAS pin configuration, PIN = W7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SDMMC_CLKI pin configuration, PIN = H15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_CLKO pin configuration, PIN = G19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_CMD pin configuration, PIN = H18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+ /* External pull-ups are present. */
+ /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
+
+ /* SDMMC_DAT0 pin configuration, PIN = F20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+ /* External pull-ups are present. */
+ /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
+
+ /* SDMMC_DAT1 pin configuration, PIN = H14 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+ /* External pull-ups are present. */
+ /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
+
+ /* SDMMC_DAT2 pin configuration, PIN = E19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+ /* External pull-ups are present. */
+ /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
+
+ /* SDMMC_DAT3 pin configuration, PIN = D19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+ /* External pull-ups are present. */
+ /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
+
+ /* SDMMC_DDIR0 pin configuration, PIN = F19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_DDIR1 pin configuration, PIN = E20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_DDIR2 pin configuration, PIN = F18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_DDIR3 pin configuration, PIN = E18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SDMMC_CDIR pin configuration, PIN = G18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description: Set up touch screen muxing
+*******************************************/
+void muxSetupTouchScreen(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SPI1_CLK pin configuration, PIN = U18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SPI1_MOSI pin configuration, PIN = V20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SPI1_MISO pin configuration, PIN = T18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+ /* SPI1_nCS0 pin configuration, PIN = U19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0;
+ *MuxConfigReg = 0x00; /* Mode = 0, PUPD=Disabled */
+
+#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
+
+ /* PEN_IRQ pin configuration, PIN = N15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_GPIO85;
+ *MuxConfigReg = 0x03; /* Mode = 3, PUPD=Disabled */
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+***************************************************************/
+void muxSetupGPMC(void)
+{
+ volatile uint8 *MuxConfigReg;
+ volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
+
+ /* gpmc_io_dir */
+ *MCR = 0x19000000;
+
+ /* NOR FLASH CS0 */
+ /* signal - Gpmc_clk;
+ pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3;
+ *MuxConfigReg = 0x00;
+
+ /* MPDB(Multi Port Debug Port) CS1 */
+ /* signal - gpmc_ncs1;
+ pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1;
+ *MuxConfigReg = 0x00;
+
+ /* signal - Gpmc_ncs2;
+ pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2;
+ *MuxConfigReg = 0x00;
+
+ /* signal - Gpmc_ncs3;
+ pin - N2; offset - 0x008C; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3;
+ *MuxConfigReg = 0x00;
+
+ MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000090);
+ *MuxConfigReg = 0x00;
+ MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000091);
+ *MuxConfigReg = 0x00;
+ MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000092);
+ *MuxConfigReg = 0x00;
+ MuxConfigReg = (volatile uint8 *)((volatile unsigned char *)0x48000093);
+ *MuxConfigReg = 0x00;
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC (ostboot)
+ * Description: Configures balls which come up in protected mode
+****************************************************************/
+void muxSetupSDRC(void)
+{
+ /* It's set by IPL */
+}