board/aries: Remove

The various Aries Embedded boards have been orphaned for a year and no
one has come forward to take care of them.  Remove.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 364 deletions

diff --git a/board/aries/m53evk/m53evk.c b/board/aries/m53evk/m53evk.c
deleted file mode 100644
index 77ba69c705..0000000000
--- a/board/aries/m53evk/m53evk.c
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Aries M53 module
- *
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <asm/mach-imx/mx5_video.h>
-#include <asm/spl.h>
-#include <linux/errno.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <spl.h>
-#include <fsl_esdhc.h>
-#include <asm/gpio.h>
-#include <usb/ehci-ci.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-/* Special MXCFB sync flags are here. */
-#include "../drivers/video/mxcfb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void setup_iomux_uart(void)
-{
-	static const iomux_v3_cfg_t uart_pads[] = {
-		MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-		MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
-	if (port == 0) {
-		/* USB OTG PWRON */
-		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
-					PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
-		gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
-
-		/* USB OTG Over Current */
-		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
-	} else if (port == 1) {
-		/* USB Host PWRON */
-		imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
-					PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
-		gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
-
-		/* USB Host Over Current */
-		imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
-	}
-
-	return 0;
-}
-#endif
-
-static void setup_iomux_fec(void)
-{
-	static const iomux_v3_cfg_t fec_pads[] = {
-		/* MDIO pads */
-		NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
-
-		/* FEC 0 pads */
-		NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
-
-		/* FEC 1 pads */
-		NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
-				PAD_CTL_HYS | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = {
-	MMC_SDHC1_BASE_ADDR,
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
-	gpio_direction_input(IMX_GPIO_NR(1, 1));
-
-	return !gpio_get_value(IMX_GPIO_NR(1, 1));
-}
-
-#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-				 PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
-				 PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
-	static const iomux_v3_cfg_t sd1_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
-		MX53_PAD_EIM_DA13__GPIO3_13,
-
-		MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
-	};
-
-	esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
-
-	/* GPIO 2_31 is SD power */
-	gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
-static struct fb_videomode const ampire_wvga = {
-	.name		= "Ampire",
-	.refresh	= 60,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 29851, /* picosecond (33.5 MHz) */
-	.left_margin	= 89,
-	.right_margin	= 164,
-	.upper_margin	= 23,
-	.lower_margin	= 10,
-	.hsync_len	= 10,
-	.vsync_len	= 10,
-	.sync		= FB_SYNC_CLK_LAT_FALL,
-};
-
-int board_video_skip(void)
-{
-	int ret;
-	ret = ipuv3_fb_init(&ampire_wvga, 1, IPU_PIX_FMT_RGB666);
-	if (ret)
-		printf("Ampire LCD cannot be configured: %d\n", ret);
-	return ret;
-}
-#endif
-
-#define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-static void setup_iomux_video(void)
-{
-	static const iomux_v3_cfg_t lcd_pads[] = {
-		MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
-		MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
-		MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
-		MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
-		MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
-		MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
-		MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
-		MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
-		MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
-		MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
-		MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
-		MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
-		MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
-		MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
-		MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
-		MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
-		MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
-		MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
-		MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
-		MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
-		MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
-		MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
-		MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
-		MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
-		MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
-		MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
-		MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
-		MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
-		MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
-		MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
-		MX53_PAD_EIM_A25__IPU_DI1_PIN12,
-		MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-}
-
-static void setup_iomux_nand(void)
-{
-	static const iomux_v3_cfg_t nand_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
-				PAD_CTL_PUS_100K_UP),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
-				PAD_CTL_PUS_100K_UP),
-		NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
-				PAD_CTL_DSE_HIGH),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
-				PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
-}
-
-static void m53_set_clock(void)
-{
-	int ret;
-	const uint32_t ref_clk = MXC_HCLK;
-	const uint32_t dramclk = 400;
-	uint32_t cpuclk;
-
-	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
-					    PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
-	gpio_direction_input(IMX_GPIO_NR(4, 0));
-
-	/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
-	cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
-
-	ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
-	if (ret)
-		printf("CPU:   Switch CPU clock to %dMHz failed\n", cpuclk);
-
-	ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
-	if (ret) {
-		printf("CPU:   Switch peripheral clock to %dMHz failed\n",
-			dramclk);
-	}
-
-	ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
-	if (ret)
-		printf("CPU:   Switch DDR clock to %dMHz failed\n", dramclk);
-}
-
-static void m53_set_nand(void)
-{
-	u32 i;
-
-	/* NAND flash is muxed on ATA pins */
-	setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
-
-	/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
-	for (i = 0x4; i < 0x94; i += 0x18) {
-		clrbits_le32(WEIM_BASE_ADDR + i,
-			     WEIM_GCR2_MUX16_BYP_GRANT_MASK);
-	}
-
-	mxc_set_clock(0, 33, MXC_NFC_CLK);
-	enable_nfc_clk(1);
-}
-
-int board_early_init_f(void)
-{
-	setup_iomux_uart();
-	setup_iomux_fec();
-	setup_iomux_i2c();
-	setup_iomux_nand();
-	setup_iomux_video();
-
-	m53_set_clock();
-
-	mxc_set_sata_internal_clock();
-
-	/* NAND clock @ 33MHz */
-	m53_set_nand();
-
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: Aries M53EVK\n");
-
-	return 0;
-}
-
-/*
- * NAND SPL
- */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
-	setup_iomux_nand();
-	m53_set_clock();
-	m53_set_nand();
-}
-
-u32 spl_boot_device(void)
-{
-	return BOOT_DEVICE_NAND;
-}
-#endif