summaryrefslogtreecommitdiff
path: root/board/atmel
diff options
context:
space:
mode:
authorWenyou Yang <wenyou.yang@atmel.com>2017-04-18 14:51:55 +0800
committerSimon Glass <sjg@chromium.org>2017-05-09 12:14:15 -0600
commit154de5ad0e6c5d66010c1dceb2ec8ca25de06aae (patch)
treef32615898fe7da37e1559237e0a421e9f6b72b69 /board/atmel
parent74631b69d6658738e2bbb39f896d622144f4c654 (diff)
board: at91sam9x5ek: Clean up code
Since the introduction of the pinctrl and clock driver and the device tree files, remove unneeded hard coded related code from the board file. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'board/atmel')
-rw-r--r--board/atmel/at91sam9x5ek/at91sam9x5ek.c78
1 files changed, 0 insertions, 78 deletions
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 0ae42dd158..235b33725d 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -14,18 +14,10 @@
#include <asm/arch/gpio.h>
#include <lcd.h>
#include <atmel_hlcdc.h>
-#include <atmel_mci.h>
-#ifdef CONFIG_MACB
-#include <net.h>
-#endif
-#include <netdev.h>
#ifdef CONFIG_LCD_INFO
#include <nand.h>
#include <version.h>
#endif
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -92,21 +84,6 @@ static void at91sam9x5ek_nand_hw_init(void)
}
#endif
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- if (has_emac0())
- rc = macb_eth_initialize(0,
- (void *)ATMEL_BASE_EMAC0, 0x00);
- if (has_emac1())
- rc = macb_eth_initialize(1,
- (void *)ATMEL_BASE_EMAC1, 0x00);
-#endif
- return rc;
-}
-
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
.vl_col = 800,
@@ -205,51 +182,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_LCD */
-#ifndef CONFIG_DM_SPI
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs < 2;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 1:
- at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
- break;
- case 0:
- default:
- at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
- break;
- }
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 1:
- at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
- break;
- case 0:
- default:
- at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
- break;
- }
-}
-#endif /* CONFIG_ATMEL_SPI */
-#endif
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(bd_t *bd)
-{
- at91_mci_hw_init();
-
- return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
-}
-#endif
-
int board_early_init_f(void)
{
at91_seriald_hw_init();
@@ -268,14 +200,6 @@ int board_init(void)
at91sam9x5ek_nand_hw_init();
#endif
-#ifdef CONFIG_ATMEL_SPI
- at91_spi0_hw_init(1 << 4);
-#endif
-
-#ifdef CONFIG_MACB
- at91_macb_hw_init();
-#endif
-
#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI)
at91_uhp_hw_init();
#endif
@@ -302,8 +226,6 @@ void at91_spl_board_init(void)
at91_mci_hw_init();
#elif CONFIG_SYS_USE_NANDFLASH
at91sam9x5ek_nand_hw_init();
-#elif CONFIG_SYS_USE_SPIFLASH
- at91_spi0_hw_init(1 << 4);
#endif
}