Blackfin: unify cpu and boot modes

All of the duplicated code for Blackfin processors and boot modes have been
unified.  After all, the core is the same for all processors, just the
peripheral set differs (which gets handled in the drivers).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

3 files changed, 101 insertions, 115 deletions

diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
index e55c1a78a8..6688095d23 100644
--- a/board/bf533-ezkit/Makefile
+++ b/board/bf533-ezkit/Makefile
@@ -39,7 +39,7 @@ $(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
 	mv -f $@.tmp $@
 
 clean:
diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk
index f39be5fcb0..de80ffe7b4 100644
--- a/board/bf533-ezkit/config.mk
+++ b/board/bf533-ezkit/config.mk
@@ -20,6 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes
-#  256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h
-TEXT_BASE = 0x01FC0000
+
+# This is not actually used for Blackfin boards so do not change it
+#TEXT_BASE = do-not-use-me
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index 9742e0297c..e4b83d11dc 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -1,7 +1,7 @@
 /*
  * U-boot - u-boot.lds.S
  *
- * Copyright (c) 2005-2007 Analog Device Inc.
+ * Copyright (c) 2005-2008 Analog Device Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -26,127 +26,113 @@
  */
 
 #include <config.h>
+#include <asm/blackfin.h>
+#undef ALIGN
+
+/* If we don't actually load anything into L1 data, this will avoid
+ * a syntax error.  If we do actually load something into L1 data,
+ * we'll get a linker memory load error (which is what we'd want).
+ * This is here in the first place so we can quickly test building
+ * for different CPU's which may lack non-cache L1 data.
+ */
+#ifndef L1_DATA_B_SRAM
+# define L1_DATA_B_SRAM      CFG_MONITOR_BASE
+# define L1_DATA_B_SRAM_SIZE 0
+#endif
 
 OUTPUT_ARCH(bfin)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
+
+/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
+MEMORY
 {
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)	}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)	}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)	}
-  .rela.got      : { *(.rela.got)	}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)	}
-  .rela.bss      : { *(.rela.bss)	}
-  .rel.plt       : { *(.rel.plt)	}
-  .rela.plt      : { *(.rela.plt)	}
-  .init          : { *(.init)		}
-  .plt : { *(.plt) }
-  . = CFG_MONITOR_BASE;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector before the environment sector. If it throws 	*/
-    /* an error during compilation remove an object here to get	*/
-    /* it linked after the configuration sector.		*/
+	ram     : ORIGIN = CFG_MONITOR_BASE, LENGTH = CFG_MONITOR_LEN
+	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+}
 
-    cpu/bf533/start.o		(.text)
-    cpu/bf533/start1.o		(.text)
-    cpu/bf533/traps.o		(.text)
-    cpu/bf533/interrupt.o	(.text)
-    cpu/bf533/serial.o		(.text)
-    common/dlmalloc.o		(.text)
-/*  lib_blackfin/bf533_string.o	(.text) */
-/*  lib_generic/vsprintf.o	(.text) */
-    lib_generic/crc32.o		(.text)
-    lib_generic/zlib.o		(.text)
-    board/bf533-ezkit/bf533-ezkit.o		(.text)
+SECTIONS
+{
+	.text :
+	{
+#ifdef ENV_IS_EMBEDDED
+		/* WARNING - the following is hand-optimized to fit within
+		 * the sector before the environment sector. If it throws
+		 * an error during compilation remove an object here to get
+		 * it linked after the configuration sector.
+		 */
 
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/environment.o	(.text)
+		cpu/blackfin/start.o		(.text)
+		cpu/blackfin/traps.o		(.text)
+		cpu/blackfin/interrupt.o	(.text)
+		cpu/blackfin/serial.o		(.text)
+		common/dlmalloc.o		(.text)
+		lib_generic/crc32.o		(.text)
+		lib_generic/zlib.o		(.text)
+		board/bf533-ezkit/bf533-ezkit.o		(.text)
 
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
+		. = DEFINED(env_offset) ? env_offset : .;
+		common/environment.o	(.text)
+#endif
 
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+		*(.text .text.*)
+	} >ram
 
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
+	.rodata :
+	{
+		. = ALIGN(4);
+		*(.rodata .rodata.*)
+		*(.rodata1)
+		*(.eh_frame)
+		. = ALIGN(4);
+	} >ram
 
-  ___u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  ___u_boot_cmd_end = .;
+	.data :
+	{
+		. = ALIGN(256);
+		*(.data .data.*)
+		*(.data1)
+		*(.sdata)
+		*(.sdata2)
+		*(.dynamic)
+		CONSTRUCTORS
+	} >ram
 
+	.u_boot_cmd :
+	{
+		___u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		___u_boot_cmd_end = .;
+	} >ram
 
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
+	.text_l1 :
+	{
+		. = ALIGN(4);
+		__stext_l1 = .;
+		*(.l1.text)
+		. = ALIGN(4);
+		__etext_l1 = .;
+	} >l1_code AT>ram
+	__stext_l1_lma = LOADADDR(.text_l1);
 
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
+	.data_l1 :
+	{
+		. = ALIGN(4);
+		__sdata_l1 = .;
+		*(.l1.data)
+		*(.l1.bss)
+		. = ALIGN(4);
+		__edata_l1 = .;
+	} >l1_data AT>ram
+	__sdata_l1_lma = LOADADDR(.data_l1);
 
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
+	.bss :
+	{
+		. = ALIGN(4);
+		__bss_start = .;
+		*(.sbss) *(.scommon)
+		*(.dynbss)
+		*(.bss .bss.*)
+		*(COMMON)
+		__bss_end = .;
+	} >ram
 }