summaryrefslogtreecommitdiff
path: root/board/bluewater
diff options
context:
space:
mode:
authorBryan O'Donoghue <bryan.odonoghue@linaro.org>2018-04-24 18:46:30 +0100
committerStefano Babic <sbabic@denx.de>2018-04-26 08:52:51 +0200
commitaf1b492dfafc033e06da49ba05fce98504221d6c (patch)
tree68704b7fbd5d9a73508695c1ef995643c3dc0024 /board/bluewater
parent0803bcf8a974fb242175c26dd61b4158d02d24cb (diff)
tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks
commit 8519c9c98ad6 ("tools/imximage: use 0x prefix in HAB Blocks line") adds an 0x prefix to each HAB Block number to make it easier for host tools to process the HAB Block output, however it neglects to apply the same prefix to the DCD Blocks directive. You need the DCD Blocks directive if you are making a u-boot recovery image which the BootROM will accept via the USB upload utility. This disparity results in a fruity output like this with HAB Blocks prefixed but DCD Blocks not prefixed - which is pretty inconsistent. This patch fixes the difference assuming the original commit was a legitimate change. Old: Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 430080 Bytes = 420.00 KiB = 0.41 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00066c00 DCD Blocks: 00910000 0000002c 000001d4 New: Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 430080 Bytes = 420.00 KiB = 0.41 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00066c00 DCD Blocks: 0x00910000 0x0000002c 0x000001d4 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Breno Lima <breno.lima@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'board/bluewater')
0 files changed, 0 insertions, 0 deletions